LR 4.2 - not using virtual cores?
I've just updated from 4.1 to 4.2 -
First thing I noticed while exporting from NEF to jpg is this:
Before my CPU would be rockin' along between 600-700% (2.2GHz i7 MacBook pro) - nearly all cores - 4 primary and 4 virtual (8 total) - would be being used.
Now with 4.2 my CPU load is between 300-400%, with all 4 primary cores being used, but the 4 virtual cores just kinda hang out without being used.
Something is different by example of the load it stresses on the CPU cores.
But...
That said, it all seems zippy enough and is totally usable. I honestly couldn't tell you if it's exporting any faster or slower...
Any ideas what's going on?
Ben
Lightroom 4.2 should have no problems recognising and importing Canon 5DMk3 files. Actually, I imported around 200 such files late last night. So, there is something else going on with your installation. Have you tried deleting the Lr preference file ? More info where it's located can be found at http://forums.adobe.com/thread/358041?tstart=0
Similar Messages
-
AE CS5 is not using Multiple Cores
I have a six core Intel I7 980X machine which i've got running at over 4GHz, yet AE is completely not making use of this speed.
I've turned on "Render Multiple Frames Simultaneously", and set it to use all cores (it detects 12 because of hyper threading on the I7 CPU's) and this does nothing for both the Preview window/working area or when actually rendering a video in the Render Queue. It uses about 9% at most of my CPU, that's not even 2 full cores.
I also have two SSD drives in RAID 0, they're Crucial C300 SSD's, pretty much the fastest you can get, infinitely faster than any Hard Drive, yet again... not making use of these it seems. I also have 12GB DDR3 running at 2GHz, i've set AE to use 9GB of it, as much as it will allow.... yet i cant even work with HD 1080p material and get near to smooth performance or even play it smoothly with or without effects applied, atleast with the video/viewer window near to 1080p size. Really pathetic. Premiere Pro on the other hard does a much better job but still dont fully make use of the speed and cores available. Adobe Media Encoder also does not use all cores.
Other software and even games make way better use of these cores than Adobe software seems to.
I've got two ATI 5870 graphics cards in Crossfire mode, they have the latest drivers. Performance is like this on any driver version though, but as far as i know none of this software makes use of the GPU's like it does with certain CUDA based Nvidia cards. I'd still like it to actually make use of my other hardware though.
I'm most bothered about AE, so any ideas why AE CS5 is [edited] so badly?
This is on Win7 x64.
Thanks for your help!I've atleast made the renderer work a little faster by ticking "Enable OpenGL" in the Render Settings, and increasing the amount of used graphics card RAM to 800MB.
I also tried doing what those Blog posts said in the FAQ links - It has not helped much, if at all. So i tried a few different other RAM settings too, which didn't really help.
Then i put the video files on my SSD drives, and that helped a little. But not much difference still overall, very unimpressed with AE CS5 performance. It's took me hours to put together a 1min 30secs video that has 6 video files in total with some lens blur and colour grading effects applied, that's just silly, even for often slow Adobe software.
Cant see this happening but i'd like it if Adobe almost completely focus on performance for CS6 and hardly add any new features. While also making use of the speed of Solid State Drives and having GPU's also made use of more. I mean my SSD's are capable of reading around 600MB/sec and doing 40,000 I/O's per second but none of this is being made use of. -
After Effects not reporting virtual cores
I'm currently installing my new workstation and came across the same issue however, I have 36 physical cores, 72 virtual cores but only 36 are visible by AE.
Using latest CC2014.Hi Todd, thanks for the feedback, managed to change it.
However onto next thing when I look at the resources AE is using it's far from using the potential of my new workstation.
Are there specific things I should look at or change to get AE more up to speed ?
Current hardware setup:
2x Intel Xeon E5-2699v3 @2.30Ghz (2x18core)
256GB Ram
System disk: 2x120gb SSD RAID0
Scratch disk: 2x120gb SSD RAID0
Workdisk: 4x512GB SSD RAID0
Video: 2x GTX980
Windows 8.1 Pro
So for example, I'm loading in a 4K DNG sequence, I would expect Disk Usage would get up to maximum speed, however in Resource monitor it shows it's using only a mere 10MB/sec
For this example CPU & RAM are behaving quite normal as I don't expect it to be CPU intensive or Fill up my RAM completely. -
Premiere Pro is not using all core power for rendering of timeline
I have got PremierePro CS5.5 and i7 920 and nvidia GTX 295. When i edit my footage (cineform) everything is fine becouse i am using CUDA boost but when i am trying to render timeline i saw on my CPU & GPU Monitor that rendering is using maybe about 10% of power of all cores (8 cores). How to do to use all cores power when i am rendering my timeline?
When i am using cuda i work much faster with fullhd timeline than i am working with cpu. I thought that cuda is accelerating only editing of timeline becouse line is always yellow and when i am using rendering line is green and system is using cpu power. So i thought that cuda is acceleration only for editing without rendering acceleration. When i would use cuda for rendering acceleration system should work faster than with cpu rendering and it`s not true.
What is fastest way to turning off CUDA (to turn it on for a while).
Thanks a lot... -
IDVD encoding -- not using eight cores
Went from an iMac to a Mac Pro this weekend to heavily decrease the encoding times of movies (been making a lot lately). My current iMac (2.8ghz, 4gb ram) takes roughly two hours to encode (professional quality) an iDVD. I figured that with an eight core Mac Pro, this would be around 40 minutes (4x the number of available processors).
After cranking the encode, only four of the cores were lit up, not all eight. Has anyone else noticed this?Compressor, which is bundled with Final Cut Studio, can be tweaked to use all 8-cores. I don't think Compressor comes with FCE. Adobe After Effects will make use of 8-cores. Some functions in Aperture (and I THINK Motion) will use 8-cores. There may be more applications, but again, not many. It is difficult to write and debug multiple core applications:
http://en.wikipedia.org/wiki/Multi-core_(computing)
http://www.barefeats.com/octopro1.html
But can't stress how effective your workflow is improved by having a "better" computer. OK, it takes an hour to compress a video... I can still be working during that hour instead of waiting.
Mike -
Logic not using multiple cores?
I have a project that seems to be burning out my CPU. The music starts distorting and crackling, and I've noticed that the little CPU indicator is hitting the top of the chart. But, I also have the iStat monitor installed, and the CPU never reads as going above 50%.
I have a dual core intel, is it possible that Logic is using only one core?I have the same problem.
On a i7 iMac with 16 gigs of ram. Logic is only using one core no matter what settings I use (auto, 8 or 4), and even using the bus rerouting trick the plugins still run on the same core. That core create glitch when it reaches 100%, but really only 25% of my iMac is used.
Way to get us spending money, pay 3000$ for a computer that is 4 times faster than the previous one, but then your limited to 25% of what you paid for. -
Reporting-MTA not using virtual domains
I hope this will be an easy answer that I'm just not seeing...
I have mail running on 10.5.2 with multiple virtual domains.
vdomain1.com
vdomain2.com
vdomain3.com
etc.
Receiving mail and sending mail both work fine, except on occasion I get the following error trying to send to certain addresses (mchsi.com is one example):
<[email protected]>: host gateway.mchsi.com[204.127.203.150] said:
550-63.254.110.6 blocked by ldap:ou=rblmx,dc=mso,dc=att,dc=net 550 Blocked
for abuse. Please contact the administrator of your ISP or sending
mailservice. (in reply to MAIL FROM command)
Reporting-MTA: dns; mail.XServeMail.local
X-Postfix-Queue-ID: 87047361E24
X-Postfix-Sender: rfc822; [email protected]
From what I can tell, the mail server is using the machine's host name (mail.XServeMail.local) as specified in Server Admin as opposed to using something like mail.vdomain1.com.
Is there a way to tell it to use mail.vdomain1.com when mail is sent from that address, use mail.vdomain2.com when mail is sent from that address, etc.?
I've been reading a lot of the Postfix configuration information, but don't want to start down the wrong path without someone providing a bit of guidance first.
Here is the postconf -n output:
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 0
mydestination = $myhostname,localhost.$mydomain,localhost
mydomain = XServeMail.local
mydomain_fallback = localhost
myhostname = mail.XServeMail.local
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpdclientrestrictions = permit_mynetworks
smtpdenforcetls = no
smtpdpw_server_securityoptions = login,plain,cram-md5
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/certificates/Default.crt
smtpdtls_keyfile = /etc/certificates/Default.key
smtpduse_pwserver = yes
smtpdusetls = yes
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
Thank you in advance for any help.You cannot use a different host name depending on the sending domain and also this is not necessary.
What you need to do is to give your mail server a fully qualified hostname that can be resolved by an external DNS lookup. Also make sure your mail server's IP has a proper reverse PTR record. -
My Torch 9800 can not use virtual keyboard
Hi all,
When I close slider,the virtual key board do not appear,rotation function also.I use a magnet torch in the back of cellfone,virtual keyboard appear and use normally ,but when open slider and close,it back to old trouble.Please help me to solve this.I have similar problem few months ago, I end up having to replace the flexible that connect lower and upper part of Torch.
The technician told me that it is a common problem for Torch after being used for 1+ year, sounds like that the flexible has limited usage time.
When the problem just started, I could make the virtual keyboard appear by pressing under menu button, but it only works for a couple of weeks -
Dynamic Linked AE comp not using all cores in Premiere CS5 to render
I have a project that is taking forever to render and am trying to troubleshoot it. It has an AE comp that is used several times and seems to be the culprit. If i load that into after effects and render with my "use 7 of 8 cores with 1GB ram each" setting in afx then my cpu usage is about 80-90% and it renders that segment in 50 seconds.
Now when i link that into premiere and it is rendering along almost maxxing out all 8 cores until it hits that comp and then cpu usage drops down and only one core is at 80% and the rest are around below 20% and that segment takes almost 10 minutes for premiere to get through.
Now obviously i can pre-render that and replace the comp and the problem will be solved but i would much rather see premiere render at full speed like it should. Am i missing something? With multicore systems this would make dynamic linking almost worthless if it wont use them (and i LOVE dynamic linking, it is a GREAT feature)
system is win7, cs5, dual quad xeon (8 cores), GTX 460, and 20GB ram.
thanks!> Am i missing something?
No, you're not missing anything.
This is a current limitation of using Dynamic Link between Premiere Pro and After Effects. When Premiere Pro calls the headless version of After Effects to render those frames, only one After Effects process is used.
We're working on improving Dynamic Link. If you'd like to influence where we put our effort, please make a feature request so that the folks deciding what work to do can register your vote. -
SQL Server 2012 Express Install on Windows 7 SP1 Embedded not using virtual account?
Hi there,
I did a default installation of SQL Server 2012 Express on Windows 7 embedded Standard SP1.
When I look at the SQLSERVER service credential it is configured to run under "NETWORK SERVICE" instead of the virtual account "NT SERVICE\MSSQL$SQLEXPRESS".
This is different from SQL 2012 Express installation on a non-embedded Windows 7.
Why is this difference?
Secondly, because of this, I am unable to take a backup of databases to any folder other than the default SQL folder.Hi Chandrasekaran,
As Local Service account, the Network Service account and high privileged Local System account could be used by many services.
It becomes harder to track which service is actually accessing resources and performing actions, because all the services are using the one Network Service account or other account.
In Windows7 and Windows Server 2008R2, it introduces a new type of account called a virtual account, which emulates creating many unique instances of the Network Service account, so each service runs with its own instance of the Network Service account.
For example, when you install SQL 2012 on Windows Server 2008 R2 or Windows 7 and later you’ll see the services run with virtual service accounts named like:
in the format NT SERVICE\<SERVICENAME>.
According to your description, when the SQLSERVER service was run under “NETWORK SERVICE”, you only back up database to the default SQL folder. It may be caused by the NETWORK SERVICE account has limited local privileges, just accesses network
resource with the computer credential. I recommend you change the account to Local System account, by default, which has full permissions on your computer.
For more information about SQL Server service account and virtual account, you can review the following articles.
http://www.travisgan.com/2013/06/sql-server-service-account-and-per.html
http://www.sqlservercentral.com/blogs/sqldbauk/2014/01/13/sql-server-2012-and-virtual-service-accounts/
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110).aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Query on virtual column that is defined in XMLIndex does not use the index
Hello,
I am facing an issue in executing queries on a virtual column that is defined in an XMLIndex: it appears as if the index is not used.
Database details:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
For this use case the XML documents adhere to the following XSD and are stored in an XMLType column in a table:
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://a_name_space/v1"
targetNamespace="http://a_name_space/v1"
elementFormDefault="qualified" attributeFormDefault="unqualified" version="1.0">
<xsd:element name="fields">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="field" maxOccurs="unbounded">
<xsd:complexType>
<xsd:choice>
<xsd:element name="value" minOccurs="1" maxOccurs="1">
<xsd:complexType>
<xsd:simpleContent>
<xsd:extension base="notEmptyString4000Type"/>
</xsd:simpleContent>
</xsd:complexType>
</xsd:element>
<xsd:element name="values" minOccurs="1" maxOccurs="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" minOccurs="1" maxOccurs="1">
<xsd:complexType>
<xsd:simpleContent>
<xsd:extension base="notEmptyString4000Type">
<xsd:attribute name="startDate" type="xsd:date" use="required"/>
<xsd:attribute name="endDate" type="xsd:date" />
</xsd:extension>
</xsd:simpleContent>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:choice>
<xsd:attribute name="name" type="string30Type" use="required"/>
<xsd:attribute name="type" type="dataType" use="required"/>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:simpleType name="dataType">
<xsd:annotation>
<xsd:documentation>Char, Date, Number</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:string">
<xsd:enumeration value="C"/>
<xsd:enumeration value="D"/>
<xsd:enumeration value="N"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="string30Type">
<xsd:restriction base="xsd:string">
<xsd:maxLength value="30"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="notEmptyString4000Type">
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4000"/>
<xsd:pattern value=".+"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:schema>A field can have a single value as well as multiple values.
The XMLIndex is defined as follows:
CREATE INDEX test_xmltype_idx ON test_xmltype (additional_fields) INDEXTYPE IS XDB.XMLIndex
PARAMETERS
XMLTable dt_fld_tab (TABLESPACE "TAB_SPACE" COMPRESS FOR OLTP) ''fields/field''
COLUMNS
name varchar2(30 char) PATH ''@name''
,dataType varchar2(1 char) PATH ''@type''
,val varchar2(4000 char) PATH ''value/text()''
,vals XMLType PATH ''values/value'' VIRTUAL
XMLTable dt_fld_multi_value_tab (TABLESPACE "TAB_SPACE" COMPRESS FOR OLTP) ''value'' passing vals
COLUMNS
val varchar2(4000) PATH ''text()''
,startDate varchar2(30 char) PATH ''@startDate''
,endDate varchar2(30 char) PATH ''@endDate''
');The following b-tree indexes are defined:
create index dt_field_name_idx on dt_fld_tab (name);
create index dt_field_value_idx on dt_fld_tab (val);
create index dt_field_values_idx on dt_fld_multi_value_tab (val);And stats are properly computed before the queries are executed:
call dbms_stats.gather_table_stats(user, 'test_xmltype', estimate_percent => null);Queries for single values are cost efficient and fast. With 600K rows in the table these return with 0.002 seconds.
Queries for multi-valued fields / elements are not though, these result in a full table scan.
Sample XML snippet:
<fields>
<field name="multiVal" type="C">
<values>
<value startDate="2013-01-01" endDate="2013-01-01">100</value>
<value startDate="2014-01-01">120</value>
</values>
</field>
</fields>Examples of costly and slow queries:
select id from test_xmltype
where xmlexists('/fields/field/@name="multiVal"' passing additional_fields)
and xmlexists('/fields/field/values/value[@startDate="2013-01-01"]' passing additional_fields)
and xmlexists('/fields/field/values/value[text()="100"]' passing additional_fields)
select id from test_xmltype
where xmlexists('/fields/field/@name="multiVal"' passing additional_fields)
and xmlexists('/fields/field/values/value[@startDate="2013-01-01" and .="100"]' passing additional_fields);Whereas the following query on the multi valued field is fast:
select id from test_xmltype
where xmlexists('/fields/field/@name="multiVal"' passing additional_fields)
and xmlexists('/fields/field/values/value[@startDate="2013-01-01"]' passing additional_fields);For the XPath /fields/field/values/value[@startDate="2013-01-01"] the index is used.
Suspected cause: XPath issue for the value of a multi valued field, e.g. /fields/field/values/value[text()="aValue"].
Any hints are appreciated: what am I overlooking here?
Thanks in advance,
-Sjoerd
Edited by: user615230 on May 27, 2013 7:46 AMHello,
This is using binary XML. The table creation script is:
create table test_xmltype
(id number(14,0) not null primary key
,member_code varchar2(30 char) not null
,period_code varchar2(30 char) not null
,amount number(12,2) not null
,additional_fields xmltype
);The schema is not registered in the database. Is that required? It is primarily used to generate Java classes that will be used in order to construct the XML documents.
And you are right: for our initial investigation the sample XML documents are generated with a PLSQL routine and do not contain namespaces. But for the single valued fields there are also no namespaces and the queries on these are executed with very satisfactory plans.
Thanks for the swift reply.
-Sjoerd -
CT5760 - virtual-host in parameter-map not used in webauth redirect
Hi all.
I'll try posting my issue here before I post a TAC on this:
Cisco CT5760 wireless controller running IOS-XE version 3.6.0.
This issue is related to web authentication on an SSID with external web portal. It seems that the statement "virtual-host" in "parameter-map type webauth global" is not used as intended. I'll try to explain:
When a user connects to an SSID with external web authentication enabled and the user opens a web browser, the user will get redirected to the external web portal for authentication. In this redirect URL we see the parameter "switch_url=http://1.2.3.4/login.html". The IP address 1.2.3.4 is, in this example, our virtual IP. But we have also configured "virtual-host" to be webauth.example.com. And in my opinion the "switch_url" parameter should be "switch_url=http://webauth.example.com/login.html". This is how it works on our old Cisco WiSM1 implementation.
The reason why this is a problem is that the clients web browser will not accept the certificate installed on "http://1.2.3.4" because it is not issued with that IP address, only the hostname webauth.example.com. I know that it is possible to get certificates issued with an IP address (as long as it's not an RFC1918 IP address), but rumors say that many Certificate Authorities will stop issuing these soon, even with "real IPs". Therefore it is important that the redirect URL gets corrected.
Does anyone disagree with me that this is a bug?Hi and thank you for your response.
I feel that I need to clarify a few things. Here is my parameter-map config (a bit edited):
parameter-map type webauth global
virtual-ip ipv4 1.1.1.1 virtual-host webauth.example.com
intercept-https-enable
parameter-map type webauth webauth_external
type webauth
redirect for-login https://webauth-external.example.com/v2/login.html
redirect portal ipv4 x.x.x.x
So the problem here is that a web browser of the client gets the following redirect URL:
https://webauth-external.example.com/v2/login.html?switch_url=https://1.1.1.1/login.html&redirect=http://www.cnn.com
Then after a successful login on the external portal, the user gets redirected back to https://1.1.1.1/login.html. Here is the core of my problem. I think that the parameter "switch_url" should be with the name webauth.example.com since I configured it as the "virtual-host". This is the behavior we see with our old Cisco WiSM1.
When the redirect goes to https://1.1.1.1/login.html the client complains about the certificate, because it is not issued to that IP address but to the hostname.
I can verify that the client does not complain about this if I manually edit the redirect URL on the client to the following:
https://webauth-external.example.com/v2/login.html?switch_url=https://webauth.example.com/login.html&redirect=http://www.cnn.com
Then the redirect after authentication goes to https://webauth.example.com/login.html and the client accepts the certificate and everything is peachy.
Do you see my problem? And yes, the virtual IP resolves to the name in DNS. -
I do not have a problem getting in the iTunes stores. My issue is once on the site I can not use the "search". It says there is a pure virtual function call R6025. How can I solve this problem? Do I have to create a new account? Do I have to uninstall and re-install? Thanks
Thanks so much for your feedback. I really appreciate any input here.
If someone from Adobe could GUARANTEE that this problem would go away if I
purchased CS4, I would pony up the cash and do it. However, I'm skeptical
about that because I just saw someone else post a message on the forum today
who is running CS4 and getting the exact same runtime error as me.
I'll try un-installing and re-installing as Admin, and if that doesn't work,
maybe I can find a used copy of CS3.
In the meantime, I'm also wondering if a Photoshop file can carry any sort
of corrupt metadata inside it once it has errored out? Reason I ask is, I
had to port all of my old PSD files to the new computer, and I only seem to
be getting this error when I attempt to work on one of the files that
previously got the runtime error when they were sitting on my XP machine.
When I create new files from scratch on this new computer, they seem to be
working just fine (at least, for now).
If so, I would probably be smart to never open those troublesome
"errored-out" files again. -
On Thu, Jun 14, 2012 at 12:54 PM, mahdi ehsani <[email protected]> wrote:
On Sun, Jun 10, 2012 at 7:29 PM, Apple Support Communities Updates <[email protected]> wrote:
Apple Support Communities
Re: after install windows 7 32 bit there is no sound my mac is os x 10.7.2
created by The hatter in Boot Camp - View the full discussion
This solved my question
This helped me
you have RealTek on your workstation and just download the current driver which is easy to findwww.realtek.com
This solved my question
This helped me
Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
Start a new discussion in the same community/choose-container!input.jspa?contentType=1&containerType=14&container=2143&ac_ci d=op123456
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
© 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
please help us by address site please please .....
<Edited by Host>hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result -
Cc2014 not using all CPU cores or GPU
I'm using the new CC2014, and I exported a project straight out of Premiere and it utilized all 8 of my CPU and my GPU. When I export using Adobe Media Encoder, it only uses one core and doesn't seem to use the GPU at all. I tried changing the setting to from GPU to software only, and it didn't seem to make a difference.
Just found out, that drag and drop PPro Sequences into AME seems to be a work-around.Plus unchecking the "Import Sequences Natively" in AME.
Well, ..indeed it worked. Not very convenient though and it's a bug that's been around for a while (7 month!! according to some users).
Please fix this, cannot be too hard, can it?
What bothers me even more is a still low CPU usage of around 35% over all when exporting....
My system:
i7-5930K @ 4.40GHz (overclocked)
Gigabyte GTX 770 GB
SSD cache drive
HDD-RAID0 assets drive
Windows 8.1
Maybe you are looking for
-
Hello. I am working on an intranet site. On this particular page, that would have a lot of links, I decided to use pop ups. Some of the links will go to other intranet pages, so I can type in the url (the url links are working). I want some of the li
-
Hello!!! I want to see the alert log content for a specific date. But whenever I select a date window (date from.... date until) using the calendar utility there is none to be displayed!!!! Without search criteria the utility displays the last 10000
-
How come my iphone dosnt show up on itunes?
im trying to sync music onto my iphone from itunes but it dosnt show up
-
What EXACTLY does iCloud backup/sync to their server.!?!.
HI all.. hoping someone could help me out. i have read many an article regarding what iCloud backs up/syncs to their server. i Know it syncs Safari bookmarks/open tabs/reading lists to their server.. and ios8 is introducing Safari history sync too..
-
I have about 20 documents in which the content only changes on the first page. The other 5 pages the content is exactly the same. I was wondering what is the best way to manage this. I'm using InDesign CS4. Donna