LR 4.2 RC Canon 40mm and 18-135 STM Lens Profiles Not Installed

I have installed LR 4.2 RC but when I check Lens Profiles these lenses are not listed although ACR 7.2 is supposed to be supporting them. Can anyone tell me where I can get the profiles for these lenses and what is the proper procedure to install them?

I just figured out what I was doing wrong. All I had to do was open my CR2 RAW file in the development module and select the Lens Corrections Tab and checkmark the Enable Profile Corrections box and my Canon 18-135 STM lens profile was activated. Thanks for the replies.

Similar Messages

  • Lens correction profile for the Canon 18-135 STM lens in Lightroom 5 ?

    How or where can I get the lens correction profile for the Canon 18-135 STM lens in Lightroom 5 ? In effect he is not available in my list of correction lens so my lightroom is up to date apparently :/
    Thanks in advance for answer.

    There are two types of Lens profiles - raw and JPEG. It looks like you are trying to process a JPEG image and Adobe has only provided a raw lens profile for the 18-135mm IS STM lens.
    You have four options:
    1) Check for available lens profile using the Adobe Lens Profile Downloader. I checked and a JPEG lens profile is NOT available for the 18-135mm lens.
    2) Follow the procedure outlined by Steve Sprengel in this post:
    http://feedback.photoshop.com/photoshop_family/topics/lr_5_lens_profile_not_applied_for_jp g_captures_only_for_raw_captures
    More detailed instructions here for a Pentax lens example:
    http://www.pentaxforums.com/forums/post-processing-articles/176761-creating-adobe-lens-cor rection-profiles-jpgs-raw-ones.html
    This allows using the available raw lens profile with JPEG images. To my knowledge Canon DSLR cameras do not apply distortion correction to JPEG images, so the raw profile should work well. You can check this by shooting raw+JPEG and comparing the two images inside LR
    3) Create you own lens profile using the Adobe Lens Profile Creator. (A complicated process, but it can be done!).
    4) Start shooting in raw mode or raw + JPEG mode, which will allow you to extract the most benefit from LR's processing controls.

  • Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem.

    Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem. This is doing this when installing itunes/quicktime, safari 5, mobileme control panel, and the software update itself. The itunes version is 10.3.1

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • HT1338 Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install.  Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"  Any one else having this issue?  Please help.

    Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install.  Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"  Any one else having this issue?  Please help.

    Hi there!
    Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us;  working on it!"
    Message was edited by: MacLuc

  • HT3415 Ive formatted my iMac and now the applications disc will not install on my computer

    Ive formatted my iMac as I am selling it on and now the applications disc will not install on my computer.

    Isaac, Two knowledge base articles that may be of further help are:
    Reinstalling Mac OS X 10.6http://support.apple.com/kb/PH6606
    and Reinstalling Application Software that came with Mac OS X 10.6
    Be sure to read them through if you have any further problems.
    Regards,
    Ralph

  • Pci data acquisition and signal processing controller -Device software not installed

    My pc shows me ,the driver software for pci data acquisition and signal processing controller is not installed  on my Device manager.
    Please suggest me a suitable solution.

    No its not working , Give me an alternate solution.

  • I have downloaded itunes numerous times with no success. When I click the icon it says that "itunes has stopped working" and then says that "itunes was not installed properly. It provides an error message code, but it overlayed by another message.

    I downloaded itunes. It initially indicated that the download was successful, however, when I click the itunes icon, it says "ituns was not installed properly". It then gives me the message "itunes has stopped working"

    Not completely sure. But if you think it is an iTunes issue...... follow through this: Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    ALSO, if you feel like all your music will be gone as well follow through these 2:
    > Downloading past purchases from App Store, iBookstore, and iTunes Store
    > How to use your iPod to move your music to a new computer
    IF YOU THINK ITS A COMPUTER ISSUE, RESTART YOUR COMPUTER BEFORE DOING ALL THIS.

  • Looking for D7000 and Tokina 11-16mm Lens Profile

    I would think by now someone would have posted this lens profile but I can't find it for the life of me, sorry. I am sure this has been discussed to death but I have downloaded the lens profile creator (haven't figured out how to use it yet) and the Adobe Lens Profile Downloader (doesn't seem to have any third party lens data for the D7000). Any help would be great.
    On a side note I am also looking for a lens profile for the Pro-Optic 8mm f/3.5 fisheye, which I knew would be even harder to find, but if anyone has either of those I would greatly appreciate a link to download the profile. Thanks, Scott

    There are only Nikon brand lenses in the dB, nothing from Tokina, and nothing for the 11-16mm.
    ~~~~~~~~~~~~~~~
    Scott Fillmer | Sent via iPhone
    http://www.scottfillmer.com
    cell / text 334-787-9317

  • Is Anyone Else Sick and Tired of Flash Player 10 Not Installing?

    I've tried everything under the sun to get Flash Player to install on my PC, to no avail.  I went to the Adobe site and followed their instructions to the letter regarding how to resolve Flash Player installation problems.  I've also tried every suggestion on every discussion board/forum that I could find.  Flash Player still won't install or run.  I have no Flash Player capability on any site, including Youtube, which out of the blue stopped letting me watch videos because I have an "old version of Adobe's Flash Player" and I must "Get the Latest Flash Player."  Believe me, I'd like to get the latest Flash Player.  Not only have I wasted hours of my life trying to find a solution to this problem, hours that I can never get back, but it also exceedingly frustrating to go through one attempt after another after another with the same unhappy results.  Judging by what I've read online, there are untold multitudes experiencing this same problem.  What can be done?  I've all but come to the conclusion that the answer is nothing.

    ...and here is what I did. Again, Im on a macbook pro 2008 edition on 10.5.7.
    First of all, I tried everything simple I could think of. I have been having issues updating my CS3 Suite from day 1 (the updater would fail every time) and was told I needed to uninstall the Creative Suite and reinstall it on another profile to troubleshoot it. That would mean losing my Dreamweaver files, so I just put up with it.
    I tried:
    Quitting my browsers, reopening, downloading Flashplayer 10 and installing. Installer ran, Suceeded, and erased any player I had period. FAIL
    Uninstalling the flash player, reinstalling Flashplayer 10, Installer ran, Suceeded, still no player. FAIL
    Uninstalling the current flash player, reinstalling Flashplayer 9, Installer ran, Suceeded, reinstalled Flashplayer 10, removed all Flash player versions from browser detection . FAIL
    I decided to stay with FP9 so that I could view ANY flash content until I got this fixed.
    I had heard something about Filevault compatibility issues with the Adobe software. To me, this was stupid that this would exist and from what I read more people were getting flamed for USING the available Filevault options than getting real answers as why there was a conflict between the two.
    "Your answer for the issue with Adobe and FIlevault? Don't use Filevault..." What kind of response is that, people? I feel the same about IE for you Windose users... you should all convert to Firefox or Mozilla, but is that the answer to why something should supposedly work on your computer and it is refusing to do so? Not really...
    So, seeing that I am no longer in the need for the physical increase in security via File vault and really wanting to be able to not only view those little movies embedded in my Facebook posts but also try updating my creative suite3, I tried turning off Filevault.
    "FAILED: You must have at least 37.7GB available Disk space to Disable FileVault"
    What?! What gives... why would they need you to have that much space to do a disable? Either way- I have 21gb available at the time. Time to archive some photos and movies.
    I dumped everything in my pictures folder but my iPhoto files and all of my movies onto a backup drive and fixed permissions freeing up a total of 53gb, which were all out of whack. I restarted my computer and then proceeded to turn-off file vault which took a few hours.
    Today, as I started up Adobe PhotoshopCS3- my updater ran, as it has, and prompted me to update. I figured- What the heck, I'll try- and sure enough.. the updater.... worked. I now had the complete updated version of CS3... but did my flashplayer update also? Nope. Still Flashplayer 9.
    I ran the updater, and voila- I now a the owner of a shiney new working Flashplayer 10.
    So.... if you are on a Mac like meeeeeeee... you might try turning OFF filevault also if it is enabled. If you dont have it on, Maybe free up at least 50gb and see if that helps.
    Otherwise, we're singled out in this array of "HAHA! You LOSE!" in the world of updaters from Adobe. Good luck... and good night.
    -Jyn

  • Canon TS-E 17mm f/4L Lens Profile???

    Hi
    I uesed this lens for a project but i don't own it! so no chance now to creat a profile for me.
    Hase someone made a profile for this lens (with no tilt or shift of corse)?
    thanks for any reply or help!

    The lens profile delineates corrections for geometric (barrel or pincushion) distortion and for light fall-off (vignetting). The CA correction and defringe functions are separate tools that just happen to be grouped together with profile application function and the perspective distortion tools in the same panel because there is a certain logic to having them under one roof.

  • Recently purchased a Canon T5i and now my Elements 11 will not work.  Just purchased this program before I updated my camera.  Is there anything I can do to get it to work?

    How do I get my Canon T5i to work with Photoshop Elements 11?  Do I need to update?  I just purchased 11 just before 12 came out so am not that anxious to purchase the new one.

    Hi Kathy,
    If you do have the MAC App from the Apple store, you can always download the free Adobe DNG converter and use that to convert your CR2 file to DNG files. The DNG files can then be used by PSE 11.
    DNG  Converter 8.4
          http://www.adobe.com/support/downloads/detail.jsp?ftpID=5738
    Alternatively, you could use the Canon software (DPP) to conver the raw files to TIF files and use them in PSE 11.
    Brian

  • Canon 30d and iphoto 6...will not import RAW

    I'm a bit confused with iphoto 6, I know it supports Raw and my 30d... but everytime I import(or rather attept to import) RAW format it gives me an error message?????
    however jpg. are no problem....what am I doing wrong?
    thanks

    I have the same experience with Iphoto5, although Preview seems to be able to open the 39D .cr2 files. I don't think Adobe has released the patch for the Canon 30D which will allow it to handle Canon's version of Raw.
    PMG5 2X2.0, iMacG5  
    PMG5 2X2.0, iMacG5   Mac OS X (10.4.5)  

  • Bootcamp 3.1 and imac windows 7 64bit update not installing. Audio issues!

    After many days of work getting the windows 7 working in bootcamp in my imac 27 (still with audio issues) I eagerly awaited the bootcamp update and imac updates.
    Neither will install.
    Then I find that according to tech support as of now I have to reinstall Windows 7 again for the updates to work!
    It took me 5 full 8 hours days to get all my scientific programs installed and working, now I find I can't even simply update the drivers I need. I don't want to reinstall.
    My only issues are audio.
    Here they are:
    1) The headset jack works fine on the Mac side, but in Windows 7, it causes the i7 intel CPU to go crazy. There is no CPU spike on the mac side.
    2) The headset jack in the imac is a trrs jack. The same as in the iphone, a tri-band jack that has three bands, two audio out channels and one mic in channel. A trrs headset works fine on the mac side with using the headset mic (as in iphone) rather than the built in mic. (this provides much better quality for sound recording). I don't want to use a usb mike.
    In Windows 7 the mic part of the trrs headset does not work.
    3) In Windows 7 when going into audio devices recording, no audio mixer shows up, so when I do video or audio screen capture the only way to capture the sound is through the speakers and then back through the imac built in mic, rather than directly through the unit. (terrible sound quality) On the mac side the mixer element works fine.
    Now I find from other imac users that even the new updates for the imac on windows 7 don't address and fix the audio issues. I am sure not going to go through 5 more days work only to find the audio issues still don't work.
    I need these audio aspects to work properly though!
    I have tried to get drivers for the cirrus logic audio card, but guess what there are none available and cirrus logic doesn't even recognize the board or offer drivers.
    I have many windows programs I must have for my scientific research!I bought the top of the line Imac with all the bells and whistles because Apple promised that the machine could run Windows 7 in bootcamp natively!
    It doesn't. This has been a nightmare of problems.
    Is Apple going to step up to the plate and make good on their promises?
    Does any one have a fix for any of the audio issues, or know how to install the new drivers without a complete reinstall of Windows?
    Installing a few sound drivers and software should not require a complete reinstall. Getting the proper drivers for the headset jack audio in and audio out jack should be the most basic of fixes. Making the audio mixer work should be elementary.
    If you are an Apple tech person or an Apple user that can help on these issues, please do!
    Thanks, Dr. Duke
    An American profesor in Europe.
    PS I will post this under Imac windows 7 updates without a reinstall and under
    imac Sound issues.

    On another thread a few people have responded saying that their imac has the same situation, the cpu is going crazy and the imac gets hot with headphones or speakers plugged in. But this doesn't happen in the mac side.
    If you have an late 2009 imac and don't have these audio issues, let us hear from you. If you don't, lay out the problem here.
    Here is my last two cents in to the inquiry.
    Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
    Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
    Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
    Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
    Mac has a great reputation. I hope they remedy these problems right away.
    Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
    When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
    As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
    Thats it.
    Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
    Best to all!

  • Received an iTunes update and then error message "iTunes was not installed correctly.  Please reinstall iTunes. error 7 (Windows error 126) I also received and error message that MSVCR80.dll was not found.  I read online to unintall all Apple programs and

    Was not enough room to finish.  I tried to uninstall all Apple programs and reinstall but I was asked to validate an unidentified publisher and don't have a clue what that is and could not remove programs.  I am not good at fixing stuff on the computer and would like some help with this.  I have had iTunes for a long time without issue.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT4759 Hi having problems with Icloud/mobile me, so had to uninstall and now it says I can not install as my PC is windows vista, and it has to be windows 7 or 8? Help or info please?

    Hi, have had to uninstall icloud/mobile me from my windows vista pc and now trying to re-install but it's saying I need minimum of windows 7 or 8?

    Download this version of the iCloud control panel: http://support.apple.com/kb/DL1687.

Maybe you are looking for