LR 4.2 Still Not Adding to Catalog

Sometimes I need to move my photos from one folder within LR to another, but keep both sets of photos in the catalog. I do this by exporting to the new location and checking the "add to catalog" checkbox. I also change the name of all the photos at the same time.
The only problem is, it only adds a few of the photos to the catalog when moving. All of the photos are exported, I can see them in the Finder on my computer, but they aren't physically added to the catalog. I have to quit LR, open it up again and import the remaining photos to get them all added to the catalog.
I was hoping this would get fixed with the 4.2 update but I am still having this problem.

Try updating to Lightroom 4.3 RC http://labs.adobe.com/downloads/lightroom4-3.html
And Camera Raw 7.3 RC http://labs.adobe.com/downloads/cameraraw7-3.html
They are release candidates, which means they're undergoing final testing but they're much more stable than a beta version.  They have full support for the D600, so you should find the rendering looks better too.

Similar Messages

  • I am not able to add videos to itunes. So I am not able to sync them with my IPhone4s. I ve tried: dragging to itunes, minimize file name of mp4, adding by file/folder still not adding. WHY? Please help.

    I am not able to add videos to itunes. So I am not able to sync them with my IPhone4s.
    I ve tried:
    dragging to itunes,
    minimize file name of mp4,
    adding by file/folder, but still not adding.
    WHY? Please help.

    This is very serious. Your computer got infected with ransom malware, Cryptowall.
    Go here for further info.
    CryptoWall 2.0 Anything Good about Buying you Keys? - General Security
    CryptoWall and DECRYPT_INSTRUCTION Ransomware Information Guide and FAQ

  • Remove Sidebar feature STILL not added back in 10.6! ARGH! Why!?

    I'm sure I can't be the only one upset that after having the ability to completely remove the Sidebar without going into Simple Finder mode and losing the Toolbar from OSX 10.x-10.5.1ish, it's STILL not added back in after being taken out during an early 10.5.x update.
    I mean seriously, why would you REMOVE a feature? It seems in 10.6, the most you can do is remove everything from the Sidebar and drag it as far left as you can. It still wastes a lot of space.

    There's even a keyboard shortcut to toggle it back and forth. Command-Option-s and it slides gracefully away, repeat and it slides gracefully back. And the toolbar stays put. Oddly, if you click the little button to toggle the toolbar off it closes the Sidebar too. Just discovered that if you Command click the button, you start cycling thru the various options for display of the toolbar--I count 7 different states. Shift click makes everything slide away verrrry slowwwwly.
    Francine
    Francine
    Schwieder

  • New photos not added to catalog

    Hello.
    Sorry, but I am a newbie with PSE.
    I am running version 7 on Windows 7 Home Premium.  When I add new photos to the watched folder they are nit added to the catalog.  I am not informed that there are new photos to be imported to the catalog.
    Any ideas would be appreciated.
    Regards

    My photo stream is not updating either.  I realized that going back to 10/2 my photostream stopped syncing with my camera roll and my Mac & iPad.  It always worked perfectly before this...so I'm not sure what the heck is going on.
    Has your's started working yet?  What did you do to fix it.  I've reset my phone and still no luck.  Yes, on WiFi, fully charged devices...no dice.  I can manually (cable) sync my photos to my Mac, but if I wanted to do that I woudln't have purchased a Mac.

  • I reported to Austin Police Department about my unlocked iphone was stolen last week. I'm ****** off that Serial number of my stolen iphone is on another Apple ID.   IMEI still is not added into blacklist.  How can I contact to Apple Inc??

    I don't understand why Austin Police are not doing to detain theft when I showed an location with valid address according Find my iPhone on icloud.com.  They said that it might be wrong location but few blocks were correct location. I stopped at Apple Retail Store to get another unlocked iphone. I explained an employee whether they would add both IMEI and serial number into blacklist to make useless for anyone. They said they have nothing to doing. 
    I'm shocked today that IMEI number is still not added into blacklist. Serialnumber of my stolen iphone is already on another Apple ID, after restoring it.
    They let me down because unlocked iphone is EXPENSIVE, it costs $800 in Canada.
    How can I deal with Apple Inc to add both serial number and IMEI into blacklist UNTIL i get my stolen iphone back

    What blacklist? There is no universal blacklist in the US. They're working on it, but it does not exist as of this writing.
    Apple can't do anything about it. They are not a law enforcement agency.

  • My credit is not added.i purchaded yesterday AUD 8...

    Yesterday i purchased the credit forAUD 8.49 to call india.But still not added the 600 mins in my account.pls help.

    Oh it know display a message that there was a problem with a previous purchase... Why wouldn't I get a email stating the problem.

  • How to view .shtml files locally? I have added "Open in Browser" but still not able to see the local .shtml file.

    I have added Open in browser add ons in Firefox browser, but still not able to see the .shtml files on local machine.
    Can any one please tell me how to view .shtml files in Firefox?

    SHTML files are regular HTML files that make use of Server-Side Includes. In some server configurations, the special file extension is required to instruct the server to parse the file for SSI code.
    If Firefox doesn't recognize the file type, it is likely the MIME type is incorrect.
    Try this Addons
    *https://addons.mozilla.org/en-US/firefox/addon/open-in-browser/

  • PS CC edit not added to LR 5 catalog

    Hi
    I understand from the documentation that if I select a RAW file in LR 5 and choose Photo > Edit in > Photoshop CC I can then edit the file in PS and when I save the changes the new file is added to my LR catalog with the word 'Edit' added to the file name.
    I'm not seeing this.
    I select the edit in PS option and the file is opened in PS and I can make changes. When I then save those changes the file is saved in the original folder as 'untitled 1' and it is not added to the LR 5 catalog.
    I've checked the settings I can think of but cannot seem to resolve the issue. Has anyone any ideas what may be wrong or what I may have missed?
    Thanks.
    PS I have noted that when sending the file from LR to PS it (LR) does not ask me if I want to send a copy to PS, this does happen on my MB Pro. Any ideas what is wrong please?

    I think “Cloud Manager” means the app called Adobe Creative Cloud that has a red icon background and two C’s facing each other so they look like an infinity symbol.  It is where you see a list of all your CC apps.
    The normal solution is to uninsta PS-CC-2014 and re-install it, but maybe it works to uninstall the Adobe Creative Cloud app, too.

  • I just added $50 to my itunes account but when i go to buy something, its asking me to answer so many question, i answered them right and im still not able to purchase something. Please Help!

    I just added $50 to my itunes account but when i go to buy something, its asking me to answer so many questions, i answered them right and im still not able to purchase something. Please Help!

    Go to item 12 in the AppleID FAQ for help with a disabled account.
    You can also go to the AppleID support page and click manage your account for additional help.

  • Raw Images opened and saved as TIFF of PSD in photoshop not added to LR library

    Images opening from LR to PS6 are opened as CR2 files (canon) and then saved in PS - the resulting saved images are PSD files. These files are not added to the LR catalog without re-importing them. This behavior is different than it was in CS5 - in CS5 they are opened as PSD and immediately added to the LR catalog. I want the same bahavior in CS6. In LR I have set preferences to open files as PSD but they are not PSD until they are saved in PS.

    The behaviour you are now seeing when using CS6 is normal when Lightroom and Photoshop are in sync in respect of the ACR level, i.e. the derivative PSD/TIFF is NOT created until you hit Save in PS. When the ACR levels are not in sync (i.e. the PS version is lower than the LR version, as is the case using LR4 and CS5) the "ACR Mis-match" dialog appears (though you may have ticked the "Do Not Show Me Again" box after selecting "Render Using Lightroom") and in that situation the derivative file is created by Lightroom, so you see it appear in LR before it is opened into PS. The fact that the filename that you see in CS6 shows the CR2 extension is not an issue (PS always retains the raw file's full name until it is saved as a derivative file....try opening a raw file directly into CS5/CS6 from outside Lightroom and you'll see), and it will change as soon as you select Save, at which point you should also see the PSD/TIFF appear in Lightroom.
    So the only question is, why are you not seeing it? Can you confirm that when you are done in PS that you are selecting "Save" and not "Save As"? And that Lightroom is still running when you do that? And what source are you working from: Folder, Collection, Smart Collection? When you import the PSD, is "Do not import suspected duplicates" cheched or unchecked?

  • Paragraph tag not included in catalog.

    fm11 in win7.
    In the document I'm working on, some lines appear to be in a paragraph tag named "RegName". But this "RegName" can not be found in the catalog, ie if I click on the arrow to select the paragrah tag, "Regname" is not included.
    Thanks for your help.
    Stephane.

    > But I'm just wondering how this Paragraph tag could be referenced in the document while it was not in the catalog?
    Paragraphs with new tags are not automatically added to the Catalog. It's an option when creating one. When pasting in text from another FM document, new tags are not automatically cataloged. For a tag one already in the catalog, doing a Delete Format on it only removes it from the cat. Text containing it is still present and still tagged with the deleted format.
    There actually is a command (dialog sequence) that causes every format in use to get added to the cat (and the details of which I don't recall at the moment). Instances of existing catalog formats with overrides get cat entries with new names. Massive catalog pollution results, but it's great if the intent is to clean up overrides and weed out (or adopt) rogues.

  • Bluetooth Driver for dell(Inspiron N5110(ST: 3v82np1 ) is still not working well.

    Hi,
    I have tried installing "Dell Wireless 1701
    802.11 b/g/n, Bluetooth v3.0+HS Driver "
    But I saw neither wireless nor Bluetooth was defined.
    As  the drivers listed below are only  the driver for wireless and bluetooth, I almost tried all of them, except the last three.
    File TitleImportanceRelease DateVersionActions
    Intel Centrino Wireless-N 1030 WiFi Driver 
    (Driver) 
    Other Formats
    Description
    Intel 6230/N1030/N1000 WiFi Driver for win7 64-bit This package provides the driver for the Intel Centrino Wireless-N 1030 WiFi Driver and imore…
    Intel Centrino Wireless-N 1030/Advanced-N 6230
    Bluetooth Adapter Driver 
    (Driver)
    Description
    This package provides the Intel Centrino Wireless-N 1030/Advanced-N 6230 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
    Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS
    Driver 
    (Driver)
    Description
    This package provides the Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS Driver and is supported on Inspiron N5110 and Vostro Notebook 3more…
    Dell Wireless 1702 WiFi + Bluetooth Driver 
    (Driver)
    s
    Description
    This package provides the Dell Wireless 1702 802.11 b/g/n, Bluetooth 3.0+HS Driver and is supported on Inspiron and Vostro Notebook models tmore…
    Intel Centrino Wireless-N 1000, Centrino Advanced-N
    6230, Centrino Wireless-N 1030, v.14.2.0.10, A01 
    (Driver)
    Recommended
    Description
    This package provides the Intel Centrino Wireless-N 1000/1030, Advanced-N 6230 Driver and is supported on Inspiron N5110 and Vostro Notebook more…
    Intel Centrino Advanced-N 6230/Wireless-N 1030
    Bluetooth Adapter Driver 
    (Driver)
    Description
    This package provides the Intel Centrino Advanced-N 6230/Wireless-N 1030 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
    Add to My Download List
    Dell Wireless WLAN 1502 Half Mini-Card Driver 
    (Driver)
    Description
    This package provides the driver for Dell Wireless WLAN 1502 Half Mini-Card and is supported on Inspiron Notebook and Vostro Notebook modelmore
    Intel WiMax Link 6150 Driver 
    (Driver)
    Description
    This package provides the Intel WiMax Link 6150 Driver and is supported on Inspirion and XPS Notebook models that are running the following
    Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100
    Ethernet Controller Driver 
    (Driver)
    Description
    This package provides the Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100 Ethernet Controller Driver and is supported on Inspiron N5110 amore…
    I had to install Dell Wireless 1702 WiFi +
    Bluetooth Driver
    The wireless adapter was defined by this driver, however, the Bluetooth still has an exclamation mark in front of it, and when the Dell WLAN and Bluetooth client installation finished, a pop up message said that Windows couldn't install the device
    well, although there was a folder added in documents folder named 'Bluetooth Folder'
    Yes, the Bluetooth was named with 'Generic Bluetooth adapter' before installing 'Driver above'. However, after installing the driver above, the Bluetooth adapter named with ' Dell wireless 1702 Bluetooth v3.0". But as you see it's
    still not working will.
    The sceen shot shows the device manger before installing  Dell
    Wireless 1702 WiFi + Bluetooth Driver
    These screen shots shows the device manger after installing  Dell
    Wireless 1702 WiFi + Bluetooth Driver
    I've lit windows detect the operating program for this device on the internet, it said "Windows has detected that the operating  program of this device is up to date. As this screenshot shows.
    What should I do because nothing lift to try? If you have a look at the ninth drivers in my previous message, you will see that no other drivers for Bluetooth lift.
    Also, I have tried  to install Intel
    Centrino Wireless-N 1030 WiFi Driver 
    But I have been told that "the installation is blocked', This package of installation cannot be installed on your system' I don't know what this
    means, is it because Dell Wireless 1702 WiFi +
    Bluetooth Driver is being installed
    Could you please take some of your preciout time out to read carefully my points below to finish this problem?
    first:
    Yes, if you had a look at my first post, you would have seen that I really have downloaded and installed the drivers suitable for bluetooth, which was only Dell
    Wireless 1702 WiFi + Bluetooth Driver, which made the bluetooth recognized by Windows 7(64Bit). However, the bluetooth in the device manager still has an exclamation mark as it is shown in the device manager.
    I don't have any other drviers which can do more than the what Dell
    Wireless 1702 WiFi + Bluetooth Driver did because I have tried all the drivers listed under 'Network', exept the what are for Etherent.
    Yes, when I have tried adding the bluetooth between two laptops(Mohammad and Nasreen).  the bluetooth was added for both laptops as you see in these screenshots below:
    The Bluetooth devices of Nasreen's laptop whose bluetooth is having some problems in Device mangage.
    The Bluetooth devices of Mohammad's laptop  whosse Bluetooh is defined well in device manager.
    But there is still problem in the device managre as shown in the screenshot listed before.
    Second: (Important) That when I want to send files or recieving between two bluetooth added in either laptop, I could send them. Also, when I open the Mohammad's bluetooth added in Nansreen's laptop( screenshot
    below), I can show what is inside it.
     However, when I open the the Nasreen's bluetooth addd in Mohammad's laptop, I noticed  no reponse at all because as you see that disconnected is written in fornt "Nasreen-Pc" as this screenshot: 
    Although sometimes Nasreen-Pc gets connected as screenshot below, but I am still not able to open the Bluetooth folder of Nasreen-pc from Mohammad-pc. When trying to do that, no response is there.
    In other times, Nasreen-pc gets connected for a while, but it comes back disconnected.
    Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose Bluetooth is having some problems in the device manager.(First Screen shot below)  However,
    the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
    Finally: : when I clicked "right-click" on "Nasreen-PC" and then clicking on "detecting and troublshooting issues", I found that windows informed me that :
    But which driver should I reinstall because I have already installed the Dell
    Wireless 1702 WiFi + Bluetooth Driver almost twice?
    A man should convert his anger and sadness into strength to continue living in this life.

    Certain driver packages contain drivers from some of the essential services only and for additional services, separate drivers must be installed. Additionally, the service is installed only if a compatible device is installed (or paired).
    Therefore, you are seeing the error.
    If you are using the Bluetooth L2CAP Interface and Bluetooth Remote Control services and not able to install the services, you can try unpairing the device, restart the PC, pair the device and then check. If that too fails, you need to install a suitable
    driver, sometimes even other OEM drivers solve the issue. You can Bing/Google about this. You can also contact Dell Support for more information.
    Balaji Kundalam
    Thanks a lot,
    I really didn't understand what you mean with in your first part the service is installed only if a compatible device is installed (or paired).
    The Bluetooth is integrated with
    the laptop, then  where other services will come from, all service are related to Bluetooth.
    If there are some additional services not related to Bluetooth,
    then how can I either let them functioning well or disable them in order to get rid of the yellow exclamation mark
    on the name of my laptop in the Device and printers.
    Also, I really have installed a
    BCBT7(Broadcom Bluetooth) for HP which really defined the same Bluetooth issue,
    Device manager after installing the entire setup of driver BCBT7(Broadcom Bluetooth) on HP laptop
    but  when trying to install the same
     BCBT7(Broadcom Bluetooth)  on Dell,  I faced the error below, although there is an icon for Bluetooth in
    the system tray. Also, the Bluetooth is integrated as
    you have seen in the device manager. 
    You didn't answer me: Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose
    Bluetooth is having some problems in the device manager.(First Screen shot below)  However, the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
    A man should convert his anger and sadness into strength to continue living in this life.

  • 3.1EA2 bug still not fixed - Members of package body not listed in the tree

    Hi, I was working today with SQL Developer again and found that this bug is still not fixed even when it was reported more than 1 year ago!!!
    I did a quick search and found it here
    Package Body Tree not always showing
    The problem is when you expand the package specification or package body tree, not all members of the specification/body are listed. This is mostly observable in the package body, but it regards to the specification as well.
    Consider this case:
    CREATE TABLE EMP (
        ID               NUMBER(6,0) DEFAULT 0,
        NAME             VARCHAR2(20 BYTE) DEFAULT NULL,
        DEPT             VARCHAR2(20 BYTE) DEFAULT NULL,
        FUNCTION         VARCHAR2(20 BYTE),
        PROCEDURE        VARCHAR2(20 BYTE));
    CREATE TABLE LOOP (
      AREA    VARCHAR2(5),
      VALUE   VARCHAR2(2));
    CREATE OR REPLACE PACKAGE Test_Package1 AS
    gvc_const CONSTANT VARCHAR2(10) := 'xxx';
    PROCEDURE Test(p_RC OUT NUMBER,
                   p_ID IN NUMBER);
    END Test_Package1;
    CREATE OR REPLACE PACKAGE BODY Test_Package1 AS
    PROCEDURE Test(p_RC OUT NUMBER,
                   p_ID IN NUMBER)
    IS
    BEGIN
      --INSERT INTO EMP (ID, NAME, DEPT, PROCEDURE) VALUES (1, 'Tina', 'xxx', 'xxx');
      --INSERT INTO EMP (ID, NAME, DEPT, FUNCTION) VALUES (2, 'Jeff', 'xxx', 'xxx');
      --INSERT INTO LOOP(AREA, VALUE) VALUES('a','b');
      NULL;
    END;
    END Test_Package1;Compile the package specification and the body. Expand the spec + body in the tree. Uncomment any of the commented lines in the package body and compile the body again. Now expand the package body again and look what is displayed.
    Why? It is because SQL Developer handles words "Function", "Procedure" and "Loop" as keywords and according to them does the parsing.
    Another case
    CREATE OR REPLACE PACKAGE Test_Package1 AS
    gvc_const CONSTANT VARCHAR2(10) := 'xxx';
    TYPE Loop_rec IS RECORD(
      item1   LOOP.AREA%TYPE);
    PROCEDURE Test(p_RC OUT NUMBER,
                   p_ID IN NUMBER);
    END Test_Package1;Compile just this specification and try to expand it in the tree. Again, during parsing the package, SQL Developer takes the word "LOOP" into consideration and fails to parse the specification.
    There is exactly the same problem when you declare functions from external dll libraries in package body. Since there is no "END;" in this case, SQL Developer's parser fails...
    To me it seems you simply blindly took some keywords like "FUNCTION" and expect there will be some "END;" keyword corresponding with it.
    Can anyone have a look at this and finally fix it?

    Hi,
    Thanks for trying out SQL Developer 3.1 EA2 and providing a clear, reproducible test case for this issue. I logged an internal bug for it:
    Bug 13438696 - 3.1EA2: FORUM: CERTAIN KEYWORDS IN PKG BODY BLOCK MEMBERS FROM CONN VIEW TREE
    It seems the bug noted in the other forum thread you reference has been fixed, but really had nothing to do with problems discussed either here or there. That fix involved adding an Edit Body... item to the Package context menu in the Schema Browser, not displaying Package members correctly in the Connection view tree.
    Regards,
    Gary
    SQL Developer Team

  • ITunes imports movies; they do not show in catalog

    I have around 500 movies in my iTunes catalog. All of these have been ripped from DVD and run through MetaX to add titles,artwork, etc. Along the way there have been bumps with iTunes here and there, but I have learned what they want and have done my best to comply.
    Enter iTunes 12.0.1.26. What a disaster! For some unknown reason, this iTunes just dropped about 40 of my movies from the catalog. They are still accessible, just not through the catalog or, by extension, Apple TV.
    After working on this all day, looking for solutions and then trying to implement them, I have managed to restore all but about 6 of them. These six actually DO import into the catalog folder, but they refuse to show themselves in the catalog itself. The killer is that a couple of weeks ago, they were happy members of same. NOBODY is happy NOW!
    I would appreciate any suggestions as to what else to try.
    2 hours later:
    Reality check: I have just now checked with Apple TV from the screen of the TV. ALL of the movies in question appear there IN THE CATALOG, yet they still do not show up on my list on my computer inside iTunes.
    Where is Steve Jobs now that we need him? This company is acting more and more like Microsoft!

    Did you accidentally Hide them?  So they don't show in the event  - look for option to un-hide photos
    I know its there just don't want to open Iphoto while I am on-line as it persists in connecting to apple and I only use it off-line.

  • After successful installation of iTunes 10.6.1, iTunes will not open.  Tried complete uninstall and reinstall, still not working.  Cannot sync iPad or access iTunes at all.  Any suggestions?

    After successfully installing the iTunes upgrade to 10.6.1, Now I cannot open and access itunes.  I have tried a complete uninstall and reinstall and it is still not working. I have looked through many support communities for answers.  I added an iPad 2 almost a year ago and all was fine until my upgrade to the "cloud services" and upgrade to new version.  I have been without iTunes on my PC for a month.  Any suggestions on how to resolve this issue?

    I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

Maybe you are looking for