LR 4.3 continuously refreshes the image in develop mode

I am using LR 4.3 with Photoshop CS5. I have found that after editing a picture in photoshop (transfer from CR2 to .TIFF file) it correctly transfers back into LR as an updated .TIFF file with all edits from PS. However, on further editing of the picture in LR the image is refreshed after EACH edit (ie. file reloads into LR taking a few seconds). If I am trying to apply an edit as the refresh starts then that edit gets lost i.e. NOT applied. The refresh happends after ANY change to the file. It is very frustrating as it wastes time and makes editing slow (have to keep waiting for a refresh). It does not appear to happen in that way when editing CR2 files.
I have only noticed this feature since installing V4.3 although it may have been happening in previous versions. Is there any way round this problem?
I am using W7, i5 2.5 Ghz processor and 8 GB ram with dual screens.

This problem has existed in LR since about 3.0.
If Lightroom creates a tiff or psd for external edit, then when it is returned to LR and one attempts to further adjust the image, the adjustment sliders gray out, the photo reloads, then the sliders become active again.
Many folks say it is caused by the program writing to XMP, to turn "automatically write to XMP" off. Does NOT work! It is not the root cause.
Bampton says to flick to the next photo. Does NOT work. This is not normal behavior.
What will work to stop the activity is to close and reopen the program. This is not normal behavior.
This will not occur if the file(tiff or PSD) is written by Photoshop. If you are using 4.X and CS6 then Photoshop will write the file at the end of your session in PS. No blinkies.
If you are using 3.X and CS5 together you will not experience the problem since again PS writes the file. No blinkies.
If you are using 4.x and CS5 or under you will encounter the problem, blinkies!
I have not encountered the problem with any file written by the OS or any other program.
The problem is ONLY with tiffs or PSD files created by LR for external editing. It would seem to me this is a bug.
It is not a major bug, but annoying.
I have filed a bug report again here......http://feedback.photoshop.com/photoshop_family/topics/lr_continuously_refreshes_the_image_ in_develop_mode?rfm=1
Please drop by and sign it...........maybe we can get some attention this time. I filed a bug report before, but can't find it.
Thank you for your time,
Rich

Similar Messages

HT1688 iPhone continually drops the image I set for a contact

My iPhone continually drops the image I set for a contact. I have set a picture for my wife's contact multiple times and several days later I will notice it is not there. Any ideas on why this is happening? Pictures for other contacts are stable.

Okay, so let me see if I understand you. You say the text tone plays on certain contacts, but on others it just vibrates. The default text tone plays, but if you assign a custom text tone to a contact that does not play, it just vibrates. So, The certain people that the text tone plays, from your response after I asked about the mute switch, are these contacts assigned the default text tone. The ones that only get a vibration are assigned the custom tones? Am I getting this right?

How to use Dual monitors with G5 Mac; AND How can the image in "Develop" be made to look like wh

Two questions: How can I use my dual monitors on my G5 Mac?
How can the image in "Develop" be made to look like what it will print, just as it is
done in Photoshop with view>proof setup.

Still wondering what tool is available in LR 1.1 to "view proof"
As in Photoshop CS 3, and previous versions of PS, in view I can
choose the custom .icc profile of the printer, to view what the final
print will nearly perfectly appear like.
What tool is available in LR 1.1 to do the same?
Equipment: Mac OS 10.4.10; dual monitors; Epson Pro 9600 and SPR
2400, both dedicated to matte black ink. Color working space is
ProPhoto RGB. I stay in 16 bit.

How to use Dual monitors with G5 Mac; And... How can the image in "Develop" be made to look like

Two questions: How can I use my dual monitors on my G5 Mac?
How can the image in "Develop" be made to look like what it will print, just as it is
done in Photoshop with view>proof setup.

Patience! :)
(This was asked and answered in previous thread.)

The Navigator in "Develop" mode in Lightroom 5 doesn't show current photo

In Library mode, the Navigator does what I'm used to from previous versions of Lightroom -- it shows a preview of the currently selected photo. However, when I go into "Develop" mode, the Navigator chooses another photo from the collection I'm working on (always the same one, it seems) and shows that one. This is frustrating, because I like to use the Navigator in Develop mode to see previews of an edit I'm working on. It's also just nonsensical that it shows a different photo.
Is this a setting I need to set somewhere, or a bug?
Thanks!

john27rg wrote:
Michelle, where did you find that option? I have this problem as well with LR5, but can't find that option.
Edit > Preferences > Interface tab,
Checkbox in "Filmstrip" section

I have selected Print and a image is shown. When selected in library mode the image I want is shown, different image in print mode? How do I get the image in library mode to show and print?

When I select an image in library mode the image I want it is shown. When I go to print mode a different image is shown. Why doees this happen? How do I get my required image to show and print?
Thanks, Bob

You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Image in Develop mode - Orange Tint

I'm having an issue with my images when I switch to Develop mode. There is an orange tint that appears in each image while I'm tweaking it. Sometimes the tint is minor like the example I've attached and other times it makes it very difficult to edit the image. When I return to Library mode or export the image it's normal.
I've attached the same image in both Library and Develop mode to illustrate the issue. I've highlighted the problem areas with Yellow call-outs in the image that's open in Develop mode (note no adjustments have been made the tint appears as soon as I switch to Develop).
My system uses two video drivers (they are current as of today):
Intel HD Graphics 4000, Driver version 10.18.10.3621
NVIDIA NVS 5200M, Driver version 340.84
Thanks in advance for any assistance.
Jack

DOH, so much to learn!
Thanks

I am unable to open images in Develop Mode in Lightroom 5.4. I keep getting system crashes. Now they wont even open images up at all in any mode.

I have Lightroom 5.4 under the CC from Adobe. EVerytime i opened an image up in Develop mode, the program would crash and Microsoft would tell me its stopped working. After playing around with it, now it wont even open up images in ANY of the modes, WHAT IS GOING ON WITH LIGHTROOM ?!?

First of all, if you don't know much about how applications work inside of the OS, its wise to not look in the application folder(s). Deleting anything here can make your apps go haywire. If this happened, then you are best to 1)unregister photoshop, 2) uninstall your entire suite. 3) reinstall the suite and finally 4) reregister photoshop.
All images/textures/photo's including dng, cr2 and nef files need to be stored in your pictures folder and no where else, unless you're an intermediate user on your OS. In your pictures folder you can create folders for organizing the pictures whether by location, season's, time, or file format.
Then when you back up you can just drag a copy of the files to another drive including cd's or dvd's.
This will make sure you don't accidently delete important app files.
All this said, my OS of choice is Windows, so if anything does not sound right, thats why.
Hopefully this helps...

How can I make firefox move my images in development mode - it works from the web and with IE

Viewing web pages with Firefox from local files does not permit images to be moved. IE does allow this. Moving images from the web are fine. Why is this - code is shown below
== This happened ==
Every time Firefox opened
== I first tried it ==
== Troubleshooting information ==
Moving an Image
Hmove=-100;
function moveObjRight(obj)
obj.style.left=Hmove;
Hmove+=2;
if(Hmove

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Problem with ScrollingImagePanel. I can't refresh the modified image.

Hello friends. I am new at the "Java World". At first, sorry for my bad English. Lets go:
In my aplication I have to show a tiff image in a ScrollingImagePanel.I aplly some efects on the image, for example rotate, flip, etc.
It is working fine, but I have problem to refresh the image in the same ScrollingImagePanel.The code compiles but I have exceptions when I run the method:
public void atualiza(){
if (ziboro == false){ //no image displayed yet.This part works
ziboro = true;
JInternalFrame teste = new JInternalFrame("teste",true,true,true,true);
teste.setDefaultCloseOperation(WindowConstants.DISPOSE_ON_CLOSE);
teste.addInternalFrameListener(this);
teste.setLocation(10,10);
teste.setSize(new Dimension(200,200));
ScrollingImagePanel FlipVPanel = new ScrollingImagePanel(imagemBufa, 800, 800);
teste.getContentPane().add(FlipVPanel);
displayPanel.add(teste);
teste.setVisible(true);
teste.moveToFront();
else{
// here I want to refresh the modified image.This part is my problem
teste.getContentPane().remove(FlipVPanel);
ScrollingImagePanel FlipVPanel = new ScrollingImagePanel(imagemBufa, 800, 800);
teste.getContentPane().add(FlipVPanel);
teste.setVisible(true);
teste.moveToFront();
I think the problem is when I try to remove the ScrollingImagePanel.
Please help me, you are my hope. If you now another solution to show images at ScrollingImagePanel and refresh the image, please send me.
Thanks a lot people!

The way to find out is look under project info again. If it gives you an option to switch to double layer disc, like it does with me. Then that signals that your computer can handle them. Thats what I remember reading anyway.

How to refresh the JLabel

I have created a gif animated image which i am adding to the JLabel. what happens is that the animation runs only once and next time it does not continues why ? is it necessary to refresh the image and if that so please tell me how ?
Help me !

A the gif file is working well in IE there is no looping problem
tell me some other solution.

DW8 says there's no margin, but the image is still 10 or so pixels off

Okay, so I'm new to DW and am using DW8 (what's the newest
version anyway?)
Here's the background and my problem:
I'm working with a graphics designer in redesigning the site
for our non-profit organization, and she has a gradient along the
left side of the page. At the top of the gradient, she has a logo
blends with the gradient. The navigation bar then runs along the
top of the page with drop-down menus designed in Fireworks. It's a
beautiful design, but I'm having trouble getting things to work
properly when I'm importing them into DW.
Once again, I'm new to DW as well as FW, but I'm a quick
learner (i think). I brought these aspects (the gradient, logo,
site name, and nav bar) together in FW. I want these to form the
template for all the pages of the site so I brought them into DW to
do so. However, I need to make sure the background (the gradient)
repeats without the logo repeating. So I exported it separately and
set it as the page background using page properties. I thought that
would be simple enough. However, I can't export just the logo as a
.jpg (which it needs to be in order to look right) without it being
having a white background and no longer blending with the gradient.
So now I thought to myself, that I'd export the whole FW
image (with the gradient, logo, and nav bar) to DW and simply place
it over the gradient background, inserting it as an image, so that
these things show up at the top of the page but the gradient
continues beneath the image. It's been an amazingly frustrating
process, and I know that last idea probably sounds ridiculous to
those more experienced than myself. However, I think it may
actually work. The only problem, and a big one, is that when I
insert the image for the whole FW document (or even for just the
logo itself), even when it says the page has no margins or padding,
it still seems to set this image in and down about 10 pixesls,
making it offset with the gradient background and leaving the edge
of the logo visible (which is supposed to look like it runs off the
page). How can I fix this?
And once it's working, how do I set these two areas, the side
gradient with logo and the top nav bar with site name, to be the
template for the rest of the site with the big open area I have
left on the rest of the page as the editable region? It seems to me
like once I get this set as the template, the rest of the pages
will come together fairly quickly and easily.
Is there another way to do this that would be easier? I'm
very much open to suggestions. I don't yet have the site up on a
testing server to show anyone online, but if you would like to
email me
[email protected], I'd
welcome the correspondence and help in getting this working. I'd
also be willing to send the .html files to someone by email if they
could be helpful. Sorry for the long post, but I've spent all day
working on this problem, and am absolutely desperate. Please help,
and thank you for your time.

> The only problem, and a big one, is that when I insert
the
> image for the whole FW document (or even for just the
logo itself), even
> when
> it says the page has no margins or padding, it still
seems to set this
> image in
> and down about 10 pixesls, making it offset with the
gradient background
> and
> leaving the edge of the logo visible (which is supposed
to look like it
> runs
> off the page). How can I fix this?
You need to set 0 margin and padding on the body tag. Copy
the following
into the head of your document just before the closing head
tag (/head>)
Preferably it should go into an external stylesheet, but by
the sounds of
things you are not using this as yet.
<style type="text/css">

</style>
> And once it's working, how do I set these two areas, the
side gradient
> with
> logo and the top nav bar with site name, to be the
template for the rest
> of the
> site with the big open area I have left on the rest of
the page as the
> editable
> region? It seems to me like once I get this set as the
template, the rest
> of
> the pages will come together fairly quickly and easily.
Once you have added the above to your page, you need to save
the page as a
Template. You will be asked to create an editable region
(which is the area
that will be changed on each child page created from this
template).
The DW help files do offer some information on how to create
Template
pages - that may be the first stop for you :-)
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
Spry Widget Examples
http://www.dreamweaverresources.com/spry-widgets/

Methods to reduce the CPU Usage for painting the image

Hi,
I have developed an application to view images from an IP camera. By this I can simualtaneously view images from about 25 cameras. The problem is that the CPU Usage increases as the no of player increases. My Player is JPanel. which continuously paints the images from camera. The method 'paintImage' is called from another thread's run method. This thread is responsible for taking jpeg images from IP camera.
Here is the code for this.
public void paintImage(Image image, int fps) {
try {
int width = this.getWidth();
addToBuffer(image);
currentImage = image;
Graphics graphics = this.getGraphics();
if (isRunning && graphics != null) {
   graphics.drawImage(image, 0, 0, getWidth(), getHeight(), this);
   if(border ==true){
    graphics.setColor(Color.RED);
                      graphics.drawRect(0,0,getWidth()-1, getHeight()-1);
   graphics.setColor(Color.white);
   graphics.setFont(new Font("verdana", Font.ITALIC, 12));
   graphics.drawString("FPS : " + fps, width-60, 13);
   this.fps = fps;
   if (isRandomRecord) {
    graphics.setColor(new Color(0, 255, 0));
    graphics.fillArc((getWidth() - 10), 5, 10, 10, 0, 360);
} catch (Exception e) {
e.printStackTrace();
Can someone please help me to solve this problem so that the CPU usage can be reduced.

Can you give me more detail information about how to use
an automated profiling tool You run it and excercise your app. Then it presents stats on number of times each method was called and time spent in each method, plus other stuff. Using those two stats you can zero in on the areas that are most likely to yield resullts.

How to refresh an Image component

Hi,
jdev 1.1.1.5
I have a parent page with a table to show employees and a tab to show detail of employees
Detail is in a Region and is sharing the same datacontrol with parent page and i don´t have any parameter in task flow.
Sincronization Parent - Detail works fine using Partialtriggers.
Detail Region has a button for upload an image and another button to process the image and an Image component(by servlet) to show it.
Process button call an operation exposed in AM, This method do Insert or Update in IMAGE TABLE.
The problem is than image is not refreshed until i do full refresh the page.(but only occurs when updating the image, for insert the Image component show the new image)
I tried this code at end of process button logic but i can't achieve refresh the image.
public void saveFileUploaded() {
      oper =
          bindings.getOperationBinding("myMethodInAM");
       Map args = operaImatge.getParamsMap();
       args.put("empId", empId);
       args.put("imatgeBlob", createBlobDomain(file));
      oper.execute();
// try refresh entire region method 1
       AdfFacesContext.getCurrentInstance().addPartialTarget(JSFUtils.findComponentInRoot("r1"));
   // try refresh image component
       AdfFacesContext.getCurrentInstance().addPartialTarget(JSFUtils.findComponentInRoot("imageEmp"));
// try refresh region method 2
       RichRegion region = (RichRegion)JSFUtils.findComponentInRoot("r1");
       region.refresh(JSFUtils.getFacesContext());
}Any suggestion?
Thanks in advance
Edited by: DV on 03-sep-2011 17:36
Edited by: DV on 04-sep-2011 11:33

Hi,
I have updated the use case at first message.
you wrote
you have a binding to the component that is holding the image.. and then refresh the container region..
that would refresh the image inside.
can you give two cents?
i just created a binding for image component but
what must i do?
Remember
the button for process image (operation exposed in my AM service) and Image component(by servlet) are in the same .jsff.
Means the changes occurs in same jsff without interaction with parent page.
Thanks,
Edited by: DV on 04-sep-2011 11:43

Workspace continually refreshed, Savepoints & MergeWorkspace scenario

Hi,
I'm using Oracle WorkspaceManager from oracle version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
1./ I create a workspace with the isRefreshed flag set to true.
2./ I immediately create a savepoint A.
3./ I insert a row in a versioned table.
4./ Create savepoint B.
4./ exec dbms_wm.setdiffversions('workspace', 'A', 'workspace', 'B')
5./ Querying the diff view should show me 3 rows.
DiffBase and workspace, A rows would have wmDiffCode: NE (Not existing)
workspace, B row would have wmDiffCode: I (insert)
All is fine so far.
5./ I merge the workspace to LIVE
6./ I query the diff view again:
DiffBase and workspace, A rows would have wmDiffCode: NC (Not changed)
workspace, B row would have wmDiffCode: I (insert)
I confirm that step 6./ shows wmDiffCode: NE if I disable continual refresh.
Can somebody tell me why the wmDiffCode changes to NC in this scenario? I thought that creating a savepoint was saving a snapshot of the workspace (including DIFF view states) that should not be alterable by any refresh operations on the workspace, it seems like this assertion is false.
Any insights appreciated,
Thanks,
-Guillaume Jeudy

Hi,
This is expected. The NE code indicates that the row does not currently exist as of that version/savepoint. However, when the row is merged into the LIVE workspace, and due to the fact that the child workspace is being continually refreshed, this new row will become visable from savepoint A. Any changes into the LIVE will automatically refresh any child workspaces(including earlier savepoints) up to the point where each row is further modified. Since the row is now visible from savepoint A, the code needs to changed from NE to NC.
When the workspace is not being continually refreshed, the merge into the LIVE workspace does not cause any changes to savepoint A, and so the row remains not existent.
Regards,
Ben

LR 4.3 continuously refreshes the image in develop mode

Similar Messages

Maybe you are looking for