LR 4 Edits don't transfer to CS5

Love the new basic editing sliders. But, finding when I "edit in > PS > edit with LR adjustments", the image in PS is NOT the same as in LR. It's "darker", the histogram isn't transferring properly. Anyone else?

No I didn't have ACR latest installed, since I don't use it I didn't think of why/how that might affect LR. I just installed 6.7, everything is great. Thankyou for your quick and totally correct answer!!

Similar Messages

Why my edits don't transfer between lr4 and cs4

I edit my images for the most part in LR4 then export as a raw file into a new folder. Then when I view the images in bridge my edits don't show up. Do I have to convert to JPEG for my edits to stick?
Thank you!!!

Victoria Bampton wrote:
The short answer is yes. CS4 won't understand the edits you've done in LR4, because it's so much older. You'd need CS6 for PS to understand them.
The original question asked about JPGs. The user could convert the photos to TIF, avoiding the drawbacks of JPGs, which would then work in CS4.

How to transfer photo albums and edits done on iPad to iPhoto on Mac?

I created a photo album on my iPad. I had over 1000 pictures, and out of that I created a selection of 100. I edited and enhanced these 100. When I import the photos to the mac, I open iPhoto and get all the pictures imported. I can find all the individual pictures on iPhoto on the Mac. However the photo album and all the different edits done on the iPad are missing. Does anyone know how to make this transfer? Thanks!

This Knowledge Base Article looks like it addresses your issue. Also see this post.

Hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you

hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you

>I have managed to download the footage onto Picture Motion Browser
Isn't Picture Motion Browser available for Windows only? If so, why are you posting in an Final Cut Express forum? My apologies if I'm incorrect.
-DH

Some images don't transfer from RH8 to the Word output

Why is it that some images don't transfer from the RH8 file to my Word output when I generate?
They do transfer to the Flash Help, but not to Word.
Some of them are small images - just shots of icons or tools - and others are quite a bit larger.
It takes me at least another hour to format the Word document after the output.

Hi Patti,
I have had similar problems of images "softly and suddenly vanishing away" during export from RoboHelp to Word. I never really solved the problem, but I did find some useful tips.
First you shouldn't embed your images; in the Printed Documentation Wizard you should select "Link to sub-directory"
This has the advantage that lost images are now replaced by a small red cross -- easier to find when reviewing.
Next, in Word, try Edit>Links. If you are lucky you will see something like this:
Notice that some links have a Source File of ../Images; they are the ones I was missing. For some reason the path to the image file is moved up one level.
I never found out why, but the workaround was simple: copy the entire Images directory and paste it one level higher in the directory hierarchy. A waste of disk space, to be sure, but it worked. The grabs above show Word2003 and RH8.
Hope this helps,
--- Derek

Can I transfer my CS5 files from my Windows 7 computer to my Mac Yosemite computer and have them work with CS6 for Mac?

I am using Dreamweaver CS5 on a Windows 7 laptop. I would like to change to Dreamweaver CS6 on my Mac running Yosemite. Can I transfer my CS5 files from the Windows computer to the Mac and will CS6 be able to work those files on the Mac? I do not need nor want a subscription account. Just the stand-alone program for occasional tweeks to my web site. at www.longwayhome.com.
It is a realtively simple web site that requires only simple editing from time to time.
Ed Dover

Yes, your files in CS5 are just .html, .css, .php and .js files, there's nothing that makes them "CS5 versions" of those file types.
You can do it a couple different ways, but the easiest would be to copy the folder being used as the root directory (and all of it's contents) from one machine to the other, then on the new machine, simply set up a new site definition, using that newly copied folder as the local root.
If you want, you can export your site settings (FTP and whatnot) on the old machine...
Go to Site > Manage Site> click the site you want > Export
Copy the resulting .ste file along with the local root folder to the new machine
On the new machine go to Site > Manage Sites > import to bring in the .ste
Relink that new site to the newly copied root folder

How can I transfer Photoshop CS5 from my macbook pro running Maverick to my iMac that is running Mountain Lion

I have been trying to figure out how to transfer Photoshop CS5 from my Macbook Pro to the my iMac. The Macbook Pro was running Mountain Lion until I updated a few days ago to Maverick. The iMac is sill running Mountain Lion because when I went to update to Maverick it let me know that I would not be able to run Photoshop CS3. Under normal conditions I would not be concerned, but I don't have the Photoshop CS5 disk anymore to install it, so hence my problem.
I tried backing up to time machine and that did not work, I tried a transfer using firewire and it transfer the problem but then when I try to open it on the iMac it is looking for the serial number.
I would appreicate any help on resolving this.

Hi landonw
The HD will probably have to be removed from the MacBook Pro and connected to a USB adapter or placed in a dock to get your data off of it. I would take the MacBook Pro along, the folks at the Apple Store should be more than happy to help transfer your data to a new iMac.
{quote:}All I am really concerned about is my iTunes database and my firefox profiles.{quote}
What no BACKUP'
To protect your data in the future, pickup a USB External HD +(for under a $100)+ and use Time Machine.
Dennis

HOW CAN I TRANSFER MY CS5 FROM MY OLD MAC TO MY NEW MAC?

CAN ANYONE KNOWS HOW TO TRANSFER MY CS5 FROM MY OLD MAC TO MY NEW MAC?

deactivate (help>deactivate) it and then uninstall it from your old computer if you no longer need it on your old computer.
download the installation files if you don't have them and install using your serial number.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

Upgraded hardware, and went from XP to Win7 - how do I transfer/install CS5 onto new SSD hard drive?

I recently upgraded all my computer internals; new mobo, Samsung SSD (solid state drive), CPU and ram. Also went from XP Pro to Win 7 Pro, with Win 7 Pro now residing on the new solid state drive. I still have the old 1TB Serial ATA hard drive connected as a storage device, and this is where CS5 resides. But of course, my CS5 applications are now unusable.
Can someone please give me some guidance as to how to transfer the CS5 installation from the old HD (XP Pro) to the new SSD (Win 7 Pro)? I started doing some research, and read about first "deactivating" CS5, but I cannot open any of my CS5 applications to "deactivate". So I am stumped. I am reticent to attempt a new install from my CS5 disks until I learn the proper process..........
Any advice would be greatly appreciated.
Dave F. in Rhode Island

don't transfer, reinstall.
if you need to reset your activation count, contact adobe support - http://helpx.adobe.com/x-productkb/global/service1.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Contacts Don't Transfer All Information When Using Outlook Synching - Zen Mi

Earlier I posted regarding the following problems with Outlook Synching:
. It doesn't transfer any recurring appointments from Outlook.
2. It doesn't transfer your Outlook calendar unless you also choose to transfer your Outlook Contacts.
I now have another issue I just witnessed today....
3. I've now entered roughly 50 contacts into Outlook, and have synched them with my Micro. I find that roughly 5 - 0% of my contacts do not synch over the email address. All other information appears to be transferred to my Micro, except for the email addresses in about 5 - 0% of contacts. I thought perhaps I maxed out the memory in my Micro, but that wasn't the problem. I then thought that perhaps these contacts have too much info, and Micro transfers over only a set data limit per contact... so I removed alot of info from one of them as a test, but it still won't transfer over the email address.
Has anyone else seen that? Creative, any comments on this issue, or status on the first two?
Thanks -
Josh

Thanks for the follow-up, Jeremy. In answer to your question, the contacts that don't transfer the email addresses were not previously on the device. I did not update the contact afterwards and add the email, it was already there when I initially created the contact.
As a test, I tried creating a "Test Contact" that appeared similar to the contacts that exhibits this problem, but it transferred the email address just fine. It's just approximately 5 - 0% of my contacts that show this problem.
The contacts I've seen off-hand tend to have most fields filled in including: Full Name, Job Title, Company, Business #, Mobile #, Business Address, E-mail, Display As.
On a side note, when I deleted this test contact from MS Outlook, synched the device, and made sure I selected the checkbox stating "Delete contacts that have been deleted in Outlook".... it never removed the "Test Contact". Is this another bug?
Thanks for the help -
Josh

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I h

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I have posted several times on the forum with no responses to address this, and have seen others with the same issue. I have even gone as far as to do a complete re-install of LR5, with no success. I'm at a loss, and I depend on it for so much editing. Please help.

Reset your preferences file: Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
Report back if that doesn't work.

In iTunes 10.7, some of my podcasts don't transfer to my iPhone.

When I look in iTunes at the podcast list on my phone, the ones that don't transfer have a grey logo beside them (grey circle with two circular white arrows in them.) I don't see any reason why they shouldn't transfer. What's going on?
I can download them from the iTunes app on my phone, but this is an extra hassle when it should just sync, as my other podcasts do (other podcasts I've downloaded since this problem began do sync normally.)

Have the recipients check their spam folder. Once the message has been sent it's beyond your control whether it really gets delivered or not.
If for some reason a message cannot be delivered by the recipients mail server you'll receive a notification with the reason.

Photo-size edits don't save

All my other edits---color, contrast, effects, &c, all render and save when I hit Done or click another photo, but the Change Size slider edits don't seem to save: when I come back to the photo it's the same size as it was originally. And of course there's no "save file as" command. Can anyone comment or help---
John

John:
If you're referring to cropping a photo you have to hit the Crop button after setting the crop area. Just hitting the Done button will not save the crop.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

LR 4 Edits don't transfer to CS5

Similar Messages

Maybe you are looking for