LR 4 on Windows 8 - Cannot create preview thumbnail when exporting?

I thought I had this figured out but it appears to occur somewhat randomly. Since upgrading to Windows 8 when I export files that I have imported from Canon raw .CR2 for some files it gives an error that "the file could not be written" and lists the original source .CR2 file name. It does not do it everytime but once it happens it happens everytime for that file. When exporting 10 JPG files for example only 3 of them may have this issue. The file still exports and creates the JPG file and the only issue with the exported file appears to be that it did not create the preview thumbnail.
I have tried importing the files into new catalogs, writing to different folders etc but it still happens. Any ideas?

Ok, after lots of attempts to recreate I can do it like this:
Export as JPG to hard drive and select 'limit file size' option and give any size smaller than the full 100% quality JPG would normally create. Using any other options to limit file size such as quality < 100 or resize long edge to 1024 completes successfully.
Can someone else confirm this on Windows 8 with LR 4.2, it only takes a single file?

Similar Messages

Cannot create a file when that file already exists, but should overwrite

Hi,
I need the same file name which is at Sender side and when it reaches to Receiver directory without timestamp.
for eg., Sender side : Yeswanth.txt
and also receiver side : Yeswanth.txt
but, here it should overwrite the existing file (because, the sender side file name is always constant) at receiver directory when the job schedules for each time.
Processing parameters i has given on Receiver side:
File Construction Mode : Create
put file : Use Temporary File
and I enabled the Adapter Specific Message Attributes at Sender side and Receiver side.
Error getting receiver side at communication channel :
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
Yeswanth.txt: Cannot create a file when that file already exists.
Reward points for useful answers.
Regards,
Yeswanth.
Edited by: YeswanthRaj Kumar on May 23, 2008 8:20 AM

Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi

FTPEx: 550 : Cannot create a file when that file already exists.

Hi experts,
I am working on idoc to file scenario and PI 7.1. The idoc is split into 3 files.
In sxmb_moni , the message is successful , but in rwb( Message montoring) i am geeting the fllowing Error message.
' Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '172.19.125.190:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /Storedata/Outbound/0000001802: Cannot create a file when that file already exists. '. For details, contact your FTP server vendor..'
and this error message is not displayed for all the target files , some files are getting created succesfully.
After some times , the file in error status , gets created automatically.
What may be the reason.?
Thanks in advance .
Best Regards,
Anil

There seem to be already some files in your Target Directory with the same name as your new files (which the CC is trying to place) and the CC is not able to overwrite the existing files and hence the error...check this.
Check: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/69d7cfa4b633eae10000000a1553f6/content.htm
14. Select the File Construction Mode.
u25CB Create
The file is created. The document received last is saved in each case.
If you want the created file to be overwritten, select Overwrite Existing File. If you do not set the indicator, processing is stopped until the created file is processed.
You can only set the indicator if you select Use Temporary File under Put File below.
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 28, 2009 6:59 PM

Cannot rename DC, "Cannot create a file when that file already exists."

Hi,
A long time ago we used a domain controller named jacob.mydomain.lan. It was removed, possibly in a 'dirty' way, and now we cannot re-use that name for another domain controller. In the meantime we have upgraded to Win 2012 domain controllers
now, and when I enter this to rename:
netdom computername ourdc.mydomain.lan /add:jacob.mydomain.lan
I get the error: "Unable to add jacob.mydomain.lan as an alternate name for the computer. The error is: Cannot create a file when that file already exists."
If I enter:
netdom computername ourdc.mydomain.lan /remove:jacob.mydomain.lan
I get: "The command completed successfully", but it still refuses to add jacob.mydomain.lan
After each attempt to add a forward zone dns record 'jacob.ourdomain.lan' has been created. I always erase this manually afterwards.
What is the problem? How can I search to find the offending 'file' named 'jacob'?
Thanks a lot for help on this.
regards Tor

Kevin,
I suggest you wait 30 days instead of 3 days before you enthusiastically close threads. Some people might think you are being a jerk if you don't.
"K_evin Zhu" wrote in message
news:[email protected]...
Hi,
As this thread has been quiet for a while, we will mark it as �??Answered�?? as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to
unmark the answer as you wish.
BTW, we�??d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Best Regards
Kevin
Tomás Mason

The cluster service terminated, error 7024, cannot create a file when that file already exists

I have a test 2-node Failover cluster using Server 2012 R2
As of last night the cluster service on one of the 2 nodes is down with this error:
The Cluster Service service terminated with the following service-specific error:
Cannot create a file when that file already exists.
EventID 7024
The Cluster service waits 60 sec, tries to start, and the same error occurs again.
Any idea where to look to identify which file this error is referring to, or how to go about identifying root cause and getting a solution?
thank you.
samb

Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi

Cannot create a file when that file already exists

When i try to use Photoshop filters: Adaptive Wide Angle, Shake Reduction and Liquify. An error pop up saying "Cannot create a file when that file already exists".
Just one detail: The liquify filter doen't pop up the error right away, the error occurs just after i press the "ok" button to accept the changes.
I have already tryed to Reset the preferences, tryed to reinstall the PS, Update the PS, download (and install) the latests drivers to my pc.
My Pc fit in all the requirements, have the openGL version: 3.0
I also have Photoshop CS5 installed, in which the liquify filter works perfectly.
Here i have two Print Screen, how it looks:
The first image is just right before a click the "Adaptive Wide Angle"
The second one is right after i clicked it
If you could help me, i already thank you for wasting you time reading this!

Resetting the Photoshop preferences does not reset the preferences for the plugins.
There should be a Plugins folder. If the folder cannot be created it would cause the error you are seeing.
Can you check the permissions on the ‘Adobe’ folder at: C:\Users\jworthin\AppData\Roaming\Adobe.
Can you manually create a Plugins folder in that location or do you get an error?

Lightroom looses EXIF Thumbnail when exporting

I already have deselected "Minimum Metadata", but Lightroom 1.3 as well as Lightroom 2 Beta doesn't embed an exif thumbnail when exporting.
Is there any trick to do that? Other Data like camera model or shutter speed isn't affected, and the original image imported into lightroom had an exif thumb.
Thanks for reading

Do you have 'Show Icon Preview' turned on in Finder View Options, Cmd-J?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Import screen cannot enlarge preview thumbnail from Canon G15 raw CR2 file

Lightroom 4.3 import screen does not seem to be able to enlarge for better viewing the preview thumbnail from a Canon G15 raw CR2 file?

HI,
I do not know the answer, but I would expect, that Lr only displays the embeded jpeg preview of your raw files. And I think, that the previews are small. You can use exiftool , exiftoolgui to see what's the dimension of your previews.

Invalid media. Cannot create file" popup when generating

Okay, the background. I'm currently using RoboHelp HTML 11.0.3.268, with the latest updates as I write this, having updated from RoboHelp HTML 9. (I know that people will ask, and I understand, so I'm stating as much information up front to ensure that nobody has any questions of their own.) My main RoboHelp project is broken down into eight separate subprojects, with an output of CHM and WebHelp HTML files. In addition, my supervisor had an issue with viewing the new RoboHelp 11-generated HTML files in Google Chrome, so I found and added the RH11 files recommended by RoboHelp Help (WebHelp issues in RoboHelp versions 10 and 11). Immediately after doing this, though, I cannot generate WebHelp files.As soon as I select between any of the WebHelp Settings menu, a popup appears that reads "Invalid media. Cannot create file", followed with the directory path of the project's main .htm page. Short of reinstalling RoboHelp HTML, what options do I have to be able to generate a valid set of WebHelp files?

Here's the RH 11.0.3 files: https://drive.google.com/file/d/0B97LY22mEkjqemJobkRmRmg2RFU/view?usp=sharing Add the files to the template_stock folder.
The Chrome freezing up should be solved in RoboHelp 10/11. On RoboHelp 9, no amount of fixes will make Chrome work locally. If your manager tries the 11 WebHelp it should work fine.
Kind regards,
Willam

Windows 10 technical preview BSOD when running Lightroom

I have been running Lightroom on a PC with the Windows 10 Technical Preview. I have been experiencing frequent crashed (BSOD) but they're primarily when I'm running Lightroom. I've never had any problems with Lightroom on Windows 7,8, or 8.1, but now with Windows 10 something is wrong. I also rarely see any problems with Windows 10 when I'm NOT running Lightroom. It really seems like some issue with Lightroom and Windows 10.
I'm just curious if anyone else evaluating Windows 10 has run into problems with Lightroom.

I don't think you understand...
I'm not expressing frustration with either Lightroom or Windows 10...
I'm not using Windows 10 for anything critical. People like me sign up for things like Windows Insider and technical previews to help test the product in day-to-day situations to help make sure they work prior to final release. It's also an opportunity to evaluate the look and feel for the product. I realize that perhaps not all software companies do that, but thankfully, Microsoft does. The more people out there testing things like this, the better the chances that software will work as expected when it's released.
Of course, I have submitted feedback to Microsoft on what I have encountered, but I was also wondering if there are other Lightroom users who may have encountered similar problems or if I'm the only one.

How to create a hyperlink when exporting .pdf?

Hi guys,
I've been doing quite a bit of research on how to make an object into a hyperlink when exporting my .ai as .pdf.
So far I've come across guides that show the method of using Object > Slice and the Attributes' Image Map, but none of them seem to work when I open my exported .pdf.
How do you guys create objects with links when exporting .pdf?
Thanks in advance.

InDesign, most probably.
Or create the PDF in Illustrator and use Acrobat (Pro) afterwards to make links.
Depends on what's inside the document.

Illustrator and InDesign creating unknown files when exporting and saving. MAC CS5

Hi,
I assist a small business with IT and recently (a month or so) strange files have begun appearing in two different circumstances. As a little bit of background, our usual designer recently went on holiday to Japan so we had a temp working with us, it is possible she as fiddled with some settings.
1. When Exporting to PDF using InDesign, a folder is created named $esnp that contains a collection of files roughly 8mb in size.
*.pdf$P1O0 - 4kb
*.pdf$T - 20kb
*.pdf$W214 - 317kb
*.pdf$V429 - 1,270kb
*.pdf$W429 - 1,270kb
*.pdf$W858 - 5,083kb
2. When Saving as EPS from Illustrator, a folder is created named $esnp collection roughly 8mb
*.eps$P1O0 - 6kb
*.epsf$T - 20kb
*.eps$W214 - 317kb
*.eps$V429 - 1,268kb
*.eps$W429 - 1,268kb
*.eps$W858 - 5,078kb
Any help would be greatly appreciated.
Thanks,
Michael Gill

due to virus or trojan problem might be possible

10.5.6 windows cannot create server based profiles

Hi @ all,
at time i plan to migrate my 10.4.11 tiger to 10.5.6 leopard, this fileserver stores the user home and profiles for 40 Windows Users.
I installed a new server with leopard 10.5.6 and tested the server if the user who are loggin into my OD gets his porfile and home from this server.
Yes right, it won't work.
Following is the setup
Windows XP sp2 joined in the domain MYDOMAIN and gets his profile and home from filesrv1 (this setup works)
filesrv3 with AFP/NFS/SMB
smb standalone, identifiedy by NTLMv2 & Kerberos/NTLM/LAN-Manager, Latin 1(850), Use wins sever xxx.yyy.zzz.
sharing a folder /Volumes/System/Users as Users with SMB guest access allowed and owner rights read&write
sharing a folder /Volumes/System/Users/Profiles as Profiles wit SMB guest access allowed, strict locking, owner rights read&write
Now setting in the WGM the home directory and the windows Profile to filesrv3 following appears
By Logging in in Windows, windows says cannot load profile check you directory ... bla bla...
The logs on my server says the following
....snip....
==> /Library/Logs/WindowsServices/log.smbd <==
[2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:close_cnum(1284)
brcheck1 (172.17.35.52) closed connection to service profiles
[2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:close_cnum(1284)
brcheck1 (172.17.35.52) closed connection to service vroni
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/auth/auth.c:checkntlmpassword(319)
checkntlmpassword: Authentication for user [] -> [] FAILED with error NTSTATUS_NO_SUCHUSER
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/sesssetup.c:setupnew_vcsession(1260)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2008/12/30 14:28:36, 2, pid=5310] /SourceCache/samba/samba-187.8/samba/source/auth/auth.c:checkntlmpassword(309)
checkntlmpassword: authentication for user [vroni] -> [vroni] -> [vroni] succeeded
[2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:makeconnectionsnum(1087)
brcheck1 (172.17.35.52) connect to service profiles initially as user vroni (uid=1033, gid=20) (pid 5310)
[2008/12/30 14:28:36, 1, pid=5310] /SourceCache/samba/samba-187.8/samba/source/smbd/service.c:close_cnum(1284)
brcheck1 (172.17.35.52) closed connection to service profiles
....snip....
In the profile folder the directory for this user is created but nothing more.
The Home is mapped to V: after login but no profile is created or loaded.
It seems the the samba cannot speack correctly with the LDAP.
anyone knows somthing about this?

This doesnt work for me either, I ended up setting the profile path to C:\Documents and Settings\shortname which is OK for me but I only have a few users and a handful of PC's.
This results in proper authentication using OD, and a roaming profile that exists on the local XP computer. I map H: to my home directory and store everything there and I am done.
When Roaming Profiles work properly Id like to implement them. But even then, because Id like to implement 'group policies' I need more and it seems hard to avoid a Windows server for profiles and policy management. I would prefer not to have any Windows admin machines.
Angus

Unable to install windows 7(windows cannot create a new partiton or locate an exiting one )

I AM UNABLE TO INSTALL WINDOWS 7 HOME PREMIUM ON MY LAPTOP
MY LAPTOP SPECIFICATIONS ARE=
1 GB RAM
INTEL GMA 900 MOBILE SERIES
INTEL ATOM
160 GB HDD
CURRENTLY RUNNING LINUX MINT 15
THE ERROR=
SETUP WAS UNABLE TO CREATE A NEW PARTITION OR LOCATE AN EXISTING ONE CHECK SETUP LOG FOR MORE INFORMATION
PLEASE REPLY FAST

i tried out this method it doesn't work. Actually i have a nOTEBOOK which came with windows xp i planned to upgrade it because microsoft has stopped supplying updates.
my NOTEBOOK is of Medion company.
modal=akoya e1210
msn no.30008507
LINK FOR NOTEBOOK OFFICIAL PAGE AND SPECS
http://www.pcpro.co.uk/reviews/laptops/247451/medion-akoya-mini-e1210
by the thanks for replying an method

Acrobat 9.0 for Window - Cannot create PDF Printer

I can't create a printer as non of the drivers in "C:\program Files\adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF" work. Re-installing does not work either. I tried installing older verions 7 & 8, both created Adobe PDF Printer... when installing version 9 it deletes the printer.
The message I get is: PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-insall Adobe Acrobat 9.0
Anyone have any idea how to resolve this?

Do as I do on some items. Install a utility called TypeIt4Me the go to the announcement. Copy the link. choose add clipping give it a name put / or \ at the end so it you type the same words normally it don't trigger the typeIt4Me entry. then when you need to type the words (code used) and wait for TypeIt4Me enter it. the item highlighted in my attachment is this:
http://indesignsecrets.com/acrobats-adobe-pdf-printer-replaced-in-snow-leopard.php
which is the link to the InDesign article about snow leopard and creating Adobe quality PDF's

LR 4 on Windows 8 - Cannot create preview thumbnail when exporting?

Similar Messages

Maybe you are looking for