Lr 5.3 CRASH whole CPU.

my Lr 5.3(938183) keeps crashing my computer - just a black screen & all is closed. Nil error message. Intel R Core i3 cpu 2.13GHz, 4Gb ram with 2.99Gb usable 32bit machine. Happens while doing Developing, or copying (synchronising) or making collections. I have used Lr on a daily basis since 2007 ver1. Cam is Nikon D90. Has just crashed now while at idle - not doing any functions. Lr nil plugins at use, not running any other software. This did happen once before I upgraded to ver5.
Thx, Schully.

Duplicate thread.
I suggest you add any more information to the one you've already started (http://forums.adobe.com/thread/1423912?tstart=0), rather than creating new threads. And see the suggestion on that thread.

Similar Messages

Photoshop CS5.1 64-bit crashes whole system when using Wacom Cintiq 13HD

Hello,
I've got a big problem and Wacom Support/Forum wasn't really that helpful at all, so I hope someone here has the answer.
I'm using:
- Windows 7 Premium 64-bit with Service Pack 1
- Intel i7-267OQM 2,2 Ghz CPU
- Nvidia GeForce GT 635M 2GB
- 8GB RAM
- Adobe Photoshop CS5.1 64-bit
- on an ASUS N55S Laptop
My new Wacom Cintiq 13HD runs just fine while just browsing on the internet, with Adobe Illustrator (so far...) and Easy Paint Tool SAI.
But everytime I open my Photoshop it's just some minutes before my system freezes for a second, than blue screen appears und my whole
System crashes down. Every. damn. Time.
I read in the Wacom Forum that more people have this problem, but all suggested solutions by Wacom just don't work.
Here's the link: http://forum.wacom.eu/viewtopic.php?f=3&t=14060
The one thing I didn't try is using the USB Extensions, so I will buy some tomorow and try that too.
But maybe someone has an other idea that could help?
I tried all drivers Wacom has avaible but it still happens. I updated my Adobe Softwares, my BIOS, my graphic card, I restarted countless times,
but nothing seems to work.
Help me, please!

A problem has been detected and windows has been shut down to prevent damage to your computer
REFERENCE_BY_POINTER
If this is the first time you’ve seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.
If problems continue, disable or remove any new installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** STOP: 0x00000018 (0x0000000000000000, 0xFFFFFA800D767920, 0x0000000000000002, 0xFFFFFFFFFFFFFFFF
Collecting data for crash dump…
Initializing disk for crash dump…
Beginning dump of physical memory.
Dumping Physical memory to disk: 35
And I saw that the problem occurs with Asus Laptops and Dell Precision Laptops.
So when I've got time (-> weekend ) I'll set up my desktop pc again and try it there. Maybe it's one of the Asus drivers?

My Mac keeps crashing (whole system) when I'm watching videos with Firefox, any idea why?

Ok so I got a new mac and as usual install firefox which is my favorite browser, suddenly my computer started crashing, not just firefox the whole system froze and I had to reboot to make it work again, I didn't know what was happening until I noticed that said crashes happen when I was watching videos on firefox, I tried to use chrome and the issue was gone. So anyone has any idea why this is happening? I really would love to start using firefox again!

Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.
If this does not fix the issue, you may need to reinstall Adobe Flash Player on your computer.

Help - Premiere CC2014 When exporting it's not using my whole CPU LONG EXPORTS

Using my recently built computer with:
250gb SSD samsung (Software)
2TB HD 7200 rpm (media, export)
6 core I7 4930K
Noctua SSO CPU cooler
Nvidia Geforce 770 4gb GPU
32 gb of ram
750 watt power supply
Asus mobo
Pretty decent computer. that shouldnt have problems exporting pretty basic videos.
I am exporting for the web. .h264 CBR with 12-16 mbps or similar
No Max rendering checked.
using multiple camera files from Sony, Canon, Gopro.
When it starts exporting a video that is 20 minutes long will take 4 hours to export. Video that is 3 minutes long (right now) is taking 25 minuts to export. That didn't used to be the case.
I open my Task manager and look at the processor it is only using 1 core at about 10%
I do have GPU acceleration on but I have switched it on and off and it hasn't made a difference.
I believe when I exported from my CS5 version it would use the whole processor and hash it out real quick.
THE BIG QUESTION: IS THERE ANY SETTINGS I NEED TO CHANGE TO OPTIMIZE MY COMPUTERS HARDWARE TO EXPORT THINGS EFFICIENTLY.
Anyone have this problem and find a solution for it?
I am new to usin the adobe community and problem solving on forums so let me know if I didn't give you enough information.

I too have this problem, and it seems to be relatively new. I'm trying to figure out if there's anything I changed, but I can't place it. I've read a few threads with people having this same issue though, so I don't feel like it's anything I've done.
The only solution I've come across is to do a restart. After restarting, I open AME and just start my queue. It then utilizes all cores. Tomorrow I'm going to attempt to install a previous version of AME and see if the problem goes away.
This thread mentions a solution: AME CC2014 Very Slow Encoding
However, I believe this solution does not work. I did as it says, and it only temporarily fixed it, and I think that was due to the restart. Also, my power settings are set to Performance.

Firefox will not open on my mac; crashes whole system when I try to open!

Firefox crashes my whole system when opening for my Mac 10.5.8

Unfortunately, Firefox 4 requires either MacOS X 10.5 or 10.6. For 10.4, you can run Firefox 3.6 from here:
http://www.mozilla.com/firefox/all-older

CS5 crashes whole computer

Working in photoshop when using Filter function with Lens correction/vinette correction, noise reduction, or unsharp mask, my computer crashes instanely, no messages, have to reboot, loose all privious work done, I was only working one photo at a time, jpeg file, no enlargement. Due to this problem I send the computer to apple and reinstall the OSX, checked all hardwares, start from a clean computer. can find out why this is, is there a plugin I should install to prevent it from crashing? thank you.
My computer Apple OSX, 10.6.8
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i7
Processor Speed: 2.93 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 16 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM112.0057.B00
SMC Version (system): 1.59f2
Photoshop CS5 extended, no plugins.

Does the whole computer freeze or shutdown, or does Photoshop hang or crash?
If the whole computer freeze or shuts down - then you're probably looking at bad hardware in your system. Bad RAM is by far the most common cause, followed by bad motherboards, CPUs and power supplies.

Divide by zero crash whole machine?

hello
i have a little app that if i try to divide by zero, the whole machine crashes. its in a try/catch.. its part of a printing class for a tomcat application. but standalone tests showed that the same bit still causes the whole machine to crash.
any ideas? doesnt java have a whole try/catch around its applications that even if i dont catch it, it does... and usually give you a trace about it? and on top of that, then wouldn't win2000 also catch a top level java error even if it made it that far?

Its in a try/catch ...but what are you catching? Of course you can catch this error at runtime. Check out this example ...it catches the div by zero just fine. I don't understand why you can't control this in your program. Am I missing your point?
public class DivTest {
public DivTest() { doit(); }
public double doit() { return 8/0; }
public static void main(String args[]) {
    try {
      new DivTest();
    } catch (Exception e) {
      System.out.println(e.toString());
}

PKR crashing - high CPU usage (windows XP, bootcamp, Macbook Pro 2.5GHz)

The PKR (3D online poker) client is crashing - often half way through a game, frustratingly. I'm running Windows XP via Bootcamp and have updated to the latest Apple Bootcamp drivers. I notice very high CPU usage (consistently maxing out a core) at all times when running PKR. Anyone else having trouble with this software?

I've also been getting Kernel panics in OS X, so I took my MBP to the Apple Store in Regent St, London. They tested it and found a problem with the memory controller. After a logic board replacement the laptop is performing very well - no crashes so far in Windows or OS X. Fingers crossed.

Adobe Reader 11.0.00 crashes whole company with Internet access

Hi all
Since today we have a very bad issue with adobe Reader 11.0.00. After 20 seconds it crashes automaticly. We didn't change anything on our system.
THIS HAPPEN ONLY WHEN ADOBE READER 11.0.00 HAS INTERNET ACCESS.
Please someone help us it affects over 1700 Clients...

Hi Everyone,
This was a temporary glitch with our servers that has now been resolved. Please re-launch Acrobat/ Reader and let us know if you still face this issue.
Thanks for your patience.
Regards,
Deepak

Starting HAL crashes whole system

Hi,
I have encountered a serious issue with HAL.
If I try to start HAL, either by issuing the command "/etc/rc.d/hal start" or appending "hal" to the "DAEMONS" array in /etc/rc.conf, my machine eventually stops responding (after about 1 min).
But worse, when I leave it running and try to run some commands in another console, I get errors from the file system saying that it cannot access any files (I can try to reproduce it if you want me to be more precise).
So this seems like a kernel mode bug (is hal running in kernel mode?).
To get some debugging info, I used some parameters found at https://wiki.ubuntu.com/DebuggingHal
I edited /etc/rc.d/hal and replaced
/usr/sbin/hald
with
/usr/sbin/hald --verbose=yes --daemon=no 2>&1 | ssh user@remotehost tee hal.log
The reason for using a remote file is that my log file is gone after crash and reboot if it is stored locally.
The resulting log file can be found at http://www.tinysave.net/files/download.php?file=496341
I thought this might get fixed if I just waited, but it has been around a few months with my fully upgraded Archlinux 64 bit, so I decided to ask for your help.
My system works otherwise flawlessly if I don't start hal.
Please let me know if you need more information like command outputs or log files.
Thank you for any help on this issue!
Last edited by xtreme (2009-01-02 11:05:47)

# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
id:3:initdefault:
# Boot to X11
#id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux
c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/opt/kde/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >& /dev/null
# End of file
I'm using KDM...

Lion crashing whole system. Mouse scroll lame.

LION has crashed my system 3 times in two days since loading. It's slow to boot up too.
And, what's up with the mouse options. You have to drag your finger down to go up and up to go down. This has been the most frustrating! System prefs don't give you options. UGH! Any help?

LION has crashed my system 3 times in two days since loading.
That's not normal, but difficult to diagnose remotely. Perhaps you have incompatible third-party software (try rebooting in Safe Mode). Perhaps you have a damaged hard drive (hold down command-R at startup and repair the drive with Disk Utility). Perhaps there's something corrupt in your user folder (try testing with a new user). Perhaps you don't have enough free hard drive space, perhaps you don't have enough RAM, etc.
And, what's up with the mouse options. You have to drag your finger down to go up and up to go down.
That's natural scrolling, and can be turned off as tonefox has said (though in System Preferences -> Trackpad on a MacBook). You'd be very surprised at how quickly it starts feeling right... you just have to get your brain re-trained. Imagine that you were putting your finger on the screen instead of the trackpad and moving the document around as if it were a piece of paper. Then it makes a lot more sense that moving your fingers up moves the piece of paper up.
In any case, though, if you don't want to give it a try or don't agree that it feels natural after trying it for a while, you're free to turn it off.
System prefs don't give you options.
Since System Preferences is nothing but a collection of options, I'm not sure I understand your complaint here. Are you unable to open System Preferences, or is there some specific option you are not finding?

ITunes V6.0.0.18 - Total system crash whole importing CDs

Since installing V6.0.0.18 system crashes when importing CD. When I say crash I mean total system crash and automatic re-boot. The hard disk check reports truncated files in iTunes library (no surprise there the PC just crashed). When this happens is very variable sometimes at the start of a CD import sometimes on the last track and occasionally the import goes fine.
There is nothing wrong with my PC or CD/DVD drive, it has run happily with every other version of iTunes from V4.x onwards and continues to be very stable with the exception of this import problem
Any Idrea?

Hi Martin,
Sorry I can't help you, but you may get better help in the iTunes for Windows forum.
Regards,
CR

Web Services crashing, whole server dies

About once a day now my the Web Services on my Xserve crash and all the sites go down. When this happens I am unable to restart the web services or even restart the machine from inside the OS. I have to physically hold down the power button to restart the server. Once it comes back up everything is running well until the next time it crashes. This is running the newest 10.6.4 with all the updates. I have 2 other servers that are identical that are not having this problem and there are no DNS problems from the outside.
Here are some things from the log that concerns me:
servermgrd[67]: -[AccountsRequestHandler(AccountsOpenDirectoryHelpers) openLocalLDAPNodeIfNeeded]: dsLocalLDAP = (null), error = Error Domain=com.apple.OpenDirectory Code=2000 UserInfo=0x1004839b0 "Unable to open Directory node with name /LDAPv3/127.0.0.1."
servermgrd[67]: -[AccountsRequestHandler(AccountsOpenDirectoryHelpers) openLocalLDAPNodeIfNeeded]: dsLocalLDAP = (null), error = Error Domain=com.apple.OpenDirectory Code=2000 UserInfo=0x10205fc50 "Unable to open Directory node with name /LDAPv3/127.0.0.1."
com.apple.launchd.peruser.501[687] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
ServerScanner[710]: Preference says we shouldn't scan
com.apple.launchd.peruser.501[687] (com.apple.Kerberos.renew.plist[714]): Exited with exit code: 1
mds[72]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"
DirectoryService[28]: Misconfiguration detected in hash 'User Name' - see /Library/Logs/DirectoryService/DirectoryService.error.log for details
I have LDAP turned off in Directory Utility, don't know if this is related to anything.

Hi
Is the Server an OD Master or Replica? How do you tell? Launch Terminal and issue:
sudo serveradmin status dirserv
Supply the server administrator's password when prompted. You won't see it being typed.
Tony

Crashing & ElementsAutoAnalyzer excessive CPU Resources (w/ No Media Analysis)

I had PSE 11 when I upgraded to Mavericks. Since then I've installed PSE12 and updated the catalog obviously. I've noticed a couple of issues; crashing and CPU excessive use with ElementsAutoAnalyzer.
Crashing
When double clicking on a picture in the organizer or scrolling through pictures in the organizer, PSE would crash every so often. It happened a total of three times before my wife gave up on working in PSE. Here is a link to my Crash Report: https://www.dropbox.com/s/bb6f014u6ft1inh/PSE12Crash.txt
ElementsAutoAnalyzer
Even with all Media Analysis turned off, I noticed that ElementsAutoAnalyzer starts eating up CPU (even well after quitting PSE). I even caught it running above 700% a few times as seen here: https://www.dropbox.com/s/5lirxa1n4ylrff5/Screenshot%202013-11-26%2021.33.29.png

Kill the auto analyzer:
http://barbarabrundage.com/2013/10/31/the-elements-12-auto-analyzer-adobes-evil-undead/
Note that if you do this you won't be able to upload videos to revel. For the crash on opening, there's a known conflict between mavericks and cover flow view in your finder/open windows:
http://helpx.adobe.com/x-productkb/global/crash-using-open-save-dialog-mac.html

Crash and Java Heap Space

Hi Everybody, since Yesterday, my Flash Builder 4 has a lot of crashes with the message "Java Heap Space". I tried changing FlashBuilder.ini file to:
-Xms384m
-Xmx1024m
I changed also jvm.config in my /bin subfolder of my SDK to:
java.args=-Xms384m -Xmx1024m -Dsun.io.useCanonCaches=false
But nothing happened... I tried also removing and re-installing the builder with no success.
I have Windows XP Professional 32-bit with 3GB RAM
I have also a big .log file, if someone wants to see it, I can send it immediately...
Thanks !!!
Davide

Now, afther changing the configuration parameters, Flash Builder uses 1,2 GB RAM and the whole CPU... but the project, when exported to release build, is more or less 3,5MB... What's the problem??? I tried uninstalling and installing again this morning...

Lr 5.3 CRASH whole CPU.

Similar Messages

Maybe you are looking for