LR 5.7 - different capabilities depending on license type?

I'm using LR on a standalone (not CC) license. After running the update to LR v 5.7, I'd like to get access to the Fujifilm Classic Chrome film simulation for the Fuji X-T1 camera model. I already asked this question in the US Fuji X camera user forum, and there are mixed reports: Some users claim they have access to this film simulation when opening a RAW file that originates from the initial (black) Fuji X-T1 camera - I have the same camera, but my LR installation doesn't grant me this access.
Are there two different LR v. 5.7 versions out there with different functionalities, or did I make a mistake (I tried to call up the film simulation simulation via Camera Calibration/Profile) when calling up the profile?

I see the profiles, including Classic Chrome, in LR 5.7 with a RAF from an X-T1 I downloaded from the internet.
I am on the CC Photographer's Plan, so this doesn't verify if the serial-number version has them, and I don't feel like uninstalling this and installing the serial-number version to check.  I can say that these are internal to LR and ACR only, because unlike other extra Camera-xxxx profiles, these do not have corresponding .dcp files on disk, so it could be that they are in the CC version, only.  One bit of evidence that they should be in the non-CC version is that they ARE there in the CS6-ACR 8.7 plug-in, which isn't CC:
Here is the entry for the LR Blog back when these profiles were first introduced that doesn't say anything about them being CC-only:
Lightroom 5.4 now available
One situation where the profiles wouldn't exist is if you are viewing a non-raw (a JPG instead of a RAF) photo, because these profiles are only available for raw files.
If none of this makes sense, can we see a screenshot of your camera profile list in LR 5.7?

Similar Messages

  • Aperture performs adjustments in a different order depending on file type

    Aperture performs Adjustments in a different order depending on file type.
    Here's an example:
    Starting with two copies of an image, one in RAW format (Canon CRW from a D60), the other in TIFF (opened the .crw file in Preview and exported an 8bit tiff file).
    {The test image is a photo of my copy of Aperture on the floor of my studio (which, for reference, is a few points of Cyan off of a neutral grey).}
    The original Image.
    http://members.arstechnica.com/x/adrien/testRAW_originalImage.jpg
    Adjustments
    http://members.arstechnica.com/x/adrien/adjustments.jpg
    The RAW file adjusted
    http://members.arstechnica.com/x/adrien/testRAW_adjusted.jpg
    The TIFF files adjusted
    http://members.arstechnica.com/x/adrien/testTIFF_adjusted.jpg
    Import both of these files (testRAW.crw & testTIFF.tiff) into Aperture.
    Make adjustments to the RAW and TIFF images:
    - Exposure: Saturation -> 0 (lowest possible value).
    - White Balance: Temp -> 3500K (from 5000K).
    It doesn't matter what order you perform these operations in.
    The RAW file is now a neutral greyscale image. With the Saturation set to 0, the White Balance makes no major difference in the image, it stays grey.
    The TIFF file, however, is now a blue tinted greyscale image - much like a sepia-tone effect. Moving the White Balance slider changes the color of the image.
    It appears that Aperture is performing the Saturation and WB operations in a different order: for the RAW file it first performs the WB, then the saturation; while in the TIFF file it performs the saturation first, then the WB.
    The result is the same for a JPEG image.
    The RAW behavior is the 'expected' behavior in photography - White Balance should happen 'before' the Saturation setting.
    I've filed the bug with Apple (number 4394125 at bugreport.apple.com). hopefully they'll fix this.
    Cross posted from this discussion at the MacAch on ArsTechnica forums:
    http://episteme.arstechnica.com/groupee/forums/a/tpc/f/8300945231/m/893007866731 /r/832001796731#832001796731

    Well, there are different ways of achieving this.
    Solution 1:
    You can create a new output type which will be triggered and call a same driver program and the new smart form. I am sure you can customize as to what Purchasing document type will trigger which output type. Get in touch with someone in the function team to get this configured.
    Solution 2:
    No Customizing, let the configuration be the same, but in the driver program change the value of  "TNAPR-FONAM" immediately after the form entry_neu to the new form name based on the Purchasing document type.

  • Trying to retrieve mixed data across different rows depending on row type

    I have a requirement to extract data from a table which happens to have different row types (header, row1, row2) in it. I thought the best way to explain what I want is to demonstrate by example!
    CREATE TABLE IFSAPP.KM_MSG_TEST (MESSAGE_ID NUMBER NOT NULL,
        MESSAGE_LINE NUMBER NOT NULL, NAME VARCHAR2(255 byte) NOT
        NULL, ERROR_MESSAGE VARCHAR2(255 byte), C00 VARCHAR2(2000
        byte), C01 VARCHAR2(2000 byte), C02 VARCHAR2(2000 byte),
        C03 VARCHAR2(2000 byte), C04 VARCHAR2(2000 byte), C05
        VARCHAR2(2000 byte), C06 VARCHAR2(2000 byte),
        N00 NUMBER, N01 NUMBER,
        D00 DATE)
        TABLESPACE IFSAPP_DATA_LARGE;
    insert into ifsapp.km_msg_test values('1353078','1','HEADER','','INTRST','OKM','','380','3','30025308','9',0,0,'');
    insert into ifsapp.km_msg_test values('1353078','2','ROW1','','7034724','','','1057627','43','001','331276180003',5,0,'');
    insert into ifsapp.km_msg_test values('1353078','3','ROW2','','3','0','','','C62','DE','',0,5,'');
    insert into ifsapp.km_msg_test values('1353078','4','ROW1','','7034724','','','1058169','26','002','331346110004',6,0,'');
    insert into ifsapp.km_msg_test values('1353078','5','ROW2','','3','0','','','C62','DE','',0,6,'');
    insert into ifsapp.km_msg_test values('1353078','6','ROW1','','7016169','','','1059062','14','003','331483070005',1,0,'');
    insert into ifsapp.km_msg_test values('1353078','7','ROW2','','3','0','','','C62','JP','',0,1,'');
    insert into ifsapp.km_msg_test values('1353078','8','ROW1','','7034724','','','1059062','41','004','331483205000',11,0,'');
    insert into ifsapp.km_msg_test values('1353078','9','ROW2','','3','0','','','C62','DE','',0,11,'');
    insert into ifsapp.km_msg_test values('1353078','10','ROW1','','7057032','','','1059062','43','005','331483215001',2,0,'');
    insert into ifsapp.km_msg_test values('1353078','11','ROW2','','3','0','','','C62','DE','',0,2,'');
    insert into ifsapp.km_msg_test values('1353078','12','ROW1','','7000235','','','1059732','1','006','331566005002',14,0,'');
    insert into ifsapp.km_msg_test values('1353078','13','ROW2','','3','0','','','C62','JP','',0,14,'');
    insert into ifsapp.km_msg_test values('1353078','14','ROW1','','7014091','','','1059732','10','007','331566050010',2,0,'');
    insert into ifsapp.km_msg_test values('1353078','15','ROW2','','3','0','','','C62','DE','',0,2,'');
    commit;
    select * from ifsapp.km_msg_test;
    Message_Id Message_Line Name    Error_Message C00     C01 C02 C03     C04 C05      C06            N00 N01 D00
    1353078    1            HEADER                INTRST  OKM     380     3   30025308 9              0   0
    1353078    2            ROW1                  7034724         1057627 43  001      331276180003   5   0
    1353078    3            ROW2                  3       0               C62 DE                      0   5
    1353078    4            ROW1                  7034724         1058169 26  002      331346110004   6   0
    1353078    5            ROW2                  3       0               C62 DE                      0   6
    1353078    6            ROW1                  7016169         1059062 14  003      331483070005   1   0
    1353078    7            ROW2                  3       0               C62 JP                      0   1
    1353078    8            ROW1                  7034724         1059062 41  004      331483205000   11  0
    1353078    9            ROW2                  3       0               C62 DE                      0   11
    1353078    10           ROW1                  7057032         1059062 43  005      331483215001   2   0
    1353078    11           ROW2                  3       0               C62 DE                      0   2
    1353078    12           ROW1                  7000235         1059732 1   006      331566005002   14  0
    1353078    13           ROW2                  3       0               C62 JP                      0   14
    1353078    14           ROW1                  7014091         1059732 10  007      331566050010   2   0
    1353078    15           ROW2                  3       0               C62 DE                      0   2C03 holds a reference number for ROW1s. I want to return the following:
    Master_Ref  Ref_Num  Line_No  Seq_No  Part_No   Qty
    30025308    1059062  14       003     7016169   1
    30025308    1059062  41       004     7034724   11
    30025308    1059062  43       005     7057032   2when I select on Ref_Num being 1059062
    Master_Ref=C05 from HEADER
    Ref_Num=C03 from ROW1
    Line_No=C04 from ROW1
    Seq_No=C05 from ROW1
    Part_No=Name from ROW1
    Qty=N00 from ROW1

    Hi,
    SQL> column Master_Ref FORMAT A9
    SQL> column Ref_Num FORMAT A9
    SQL> column Line_No FORMAT A3
    SQL> column Seq_No FORMAT A3
    SQL> column Part_No FORMAT A9
    SQL>
    SQL> select
      2    Header.C05 as Master_Ref,
      3    Row1.C03 as Ref_Num,
      4    Row1.C04 as Line_No,
      5    Row1.C05 as Seq_No,
      6    Row1.C00 as Part_No,
      7    Row1.N00 as Qty
      8  from km_msg_test Row1, km_msg_test Header
      9  where Row1.name = 'ROW1'
    10    and Header.name = 'HEADER'
    11    and Row1.message_id = Header.message_id
    12    and row1.C03 = '1059062'
    13  ;
    MASTER_RE REF_NUM   LIN SEQ PART_NO          QTY
    30025308  1059062   14  003 7016169            1
    30025308  1059062   41  004 7034724           11
    30025308  1059062   43  005 7057032            2Regards,
    Dima

  • RTorrent: move downloads to different directories depending on tracker

    Hi!
    I would like rTorrent to move completed downloads to different directories depending on the trackers in the torrent. An ideal setup for me would be something like this:
    torrents/completed/tracker_x
    torrents/completed/tracker_y
    torrents/completed/tracker_z
    torrents/completed/unknown_trackers
    torrents/incomplete
    torrents/torrent_files
    torrents/session_data
    Any hints/links/etc for me? I think i can make something work if rTorrent could pass the .torrent file path and downloading directory to a bash script

    very lazily copied out my .rtorrentrc
    32 schedule = watch_directory_1,10,10,"load_start=/home/share/media/torrents/foo/*.torrent,d.set_custom1=/home /share/media/video/foo"
    33 schedule = watch_directory_2,10,10,"load_start=/home/share/media/torrents/bar/*.torrent,d.set_custom1=/home/s hare/media/video/bar"
    39 on_finished = move_complete,"d.set_directory=$d.get_custom1= ;execute=mv,-u,$d.get_base_path=,$d.get_custom1="
    there's also this, but i think it doesn't actually move the files; it makes symlinks.
    http://code.google.com/p/pyroscope/wiki … Completion
    Last edited by tladuke (2010-12-12 23:31:40)

  • Premiere Pro CC and Encoder CC ( 7.1.0 ) produce different outputs dependant on Queue or Export meth

    I have used a standard workflow for many months but recently something has changed. If I create a simple 720x576 sequence with video and then send this to Media encoder I get different results dependant on if I queue or export the sequence. If I export directly from the application then the resulting file is perfect ( MPEG2/QT ) , however if I queue the file and then export the resulting file contains small black vertical bands at either side of the image an the resulting image looks squashed.
    Testing the same workflow in CS6 does not have the issue.
    Has something changed with the latest 7.1.0 release ???
    Can anyone make a simple test and let me know ??
    If you simply queue to the Media encoder and view the window you can see the added bands ??
    I am using MAC OSX 10.7.5 as a platform
    Thanks

    Here you can download the trial they are all the first build (7.0)
    http://prodesigntools.com/adobe-cc-direct-download-links.html
    Updates can be found here:
    http://www.adobe.com/support/downloads/product.jsp?product=98&platform =Windows
    http://www.adobe.com/support/downloads/product.jsp?product=98&platform =Macintosh
    Take from http://forums.adobe.com/thread/1357792?tstart=0
    Also, take care to track down Adobe Media Encoder 7.0 — the installers above don't downgrade AME, and you'll have issues queing projects if you're sending it from Premiere 7.0 to AME 7.2.

  • Show report in different currency depending on user parameter

    hi all,
    i'm trying to show my report in different currency, depending on users given parameter.
    i hold my account balance in USD based. User should select one parameter, in which currency they want to see their account balance. (e.g. EURO, GBP ...) and depending on their selection, i want to convert USD based info into chosen currency, by fetching field from currency table and making some calculation.
    also i want to include in report currency($, £ ...) accordingly ().
    how can i achieve this, has somebody any suggestion to me?
    thanks in advance.
    bogi.

    hi,
    i think i need to explain my problem more detailed. anyone who has suggestion, please help me.
    i have 3 tables account, times and currency.
    - times table has time_key, date, day_of_week fields.
    - account table has - account_balance and time_key_FK fields.
    - currency table has currency_type, amount, time_key_FK fields.
    1. i have function decode(:Currency,'USD',account_balance,'EURO',--here i want to replace my calculation CALC1---)
    CALC1- this calculation need to some calculation like this: account_balance * (fetched field from this sql)(select amount from currency, account where currency.currency_type='EURO' and account.time_key_FK=currency.time_key_FK)
    i tried to do this, but discoverer plus doesn't let me make condition and calc. i'm very confused.
    2. after i achieve this query, somehow i want to display on worksheet on which currency is it based. can i get parameter value, and show this value as in column heading?
    tnx!!!

  • How to create a front panel display that lights up with different colours depending on its input signal?

    I am doing a project where I have this array which has different voltage outputs for each grid. How do I create a front panel object that lights up with different colours depending on the voltage input or is there already such a pre-built function?
    In addition, I wish to display these in an array on screen. Is there any pre-built function for this?

    Repulse wrote:
    I am doing a project where I have this array which has different voltage outputs for each grid. How do I create a front panel object that lights up with different colours depending on the voltage input or is there already such a pre-built function?
    The simplest way would be an intensity graph. It gives you a 2D grid where each grid point is colored according to the value of a 2D array. The Z axis color ramp determines the color.
    My second choice would be an array of colorboxes. (They could even be made to look like LEDs (see image, if course you can leave them square too), All you need is a scaling function thap maps voltages into a color ramp lookup table with an 8bit index)
    (Using booleans and color property nodes is relatively clumsy. Booleans are meant for two states because the value is boolean. Since array elements can only differ in value, and not in properties, it will not even work. Color boxes have a color data type which is much more appropriate for this case)
    LabVIEW Champion . Do more with less code and in less time .

  • IView that displays different things depending on event

    Hi list,
    I need to create an iView that will be receiving different events from other iViews.  This receiving iView will display different things depending on the event (eg. image maps, data sheet, etc).  How should I implement this iView?  Should this iView be multi-component and then the events triggers the correct component?  Or should this iView be multi JSP pages with one component handling the event and calling the correct JSP page?  Or are there any other suggestions/examples out there?
    The image map is not simple either.  It has several hotspots on one image map.
    Thanks in Advance,
    Jovanka

    Hi list,
    I need to create an iView that will be receiving different events from other iViews.  This receiving iView will display different things depending on the event (eg. image maps, data sheet, etc).  How should I implement this iView?  Should this iView be multi-component and then the events triggers the correct component?  Or should this iView be multi JSP pages with one component handling the event and calling the correct JSP page?  Or are there any other suggestions/examples out there?
    The image map is not simple either.  It has several hotspots on one image map.
    Thanks in Advance,
    Jovanka

  • Different roles depending of URL?

    Hello,
    we want to implement access to our Portal EP 6.0 SP9 from Intranet and Internet.
    User should get different roles depending the URL.
    Example:
    Intranet URL: http://server:50000/irj/portal -> role A
    Internet URL: https://domain.de/portal -> role B
    Reason is security, critical systems are only in role B.
    How can I do that?
    Thanks
    Frank

    Frank,
    my I propose a different approach? I looks as if you want to separate internal users (entering without proxy server) and edxternal users (coming through a proxy). Why not simply create an additional authentication scheme for internal users (probably the higher priviledged ones). Build a custom login module that checks the origin of the user (internal/external, e.g. based on the request's IP address).
    Now, you have two authschemes, say "internal" and "external". Assign "internal" a higher priority value than "external" and assign this authscheme to all critical content.
    Thus, all users that want to access this content, need to pass the "internal" authscheme. Users coming from external willl fail this test and thus can't access the critical content.
    Hope this helps you. If so, please mark this question as closed and reward points. Otherwise give some lines why this is not helpful for you - or if you need further assistance.
    Regards,
    Dominik

  • Creating Incident Forms different depending on Request type

    Hello,
    Is there some way to create several Incident Forms, depending on Request type?
    I want to have a Incident form with a specific field to a request of "Hardware Issue", where is asked to user the Serial Number of PC (for example)?
    And if I want another Incident Form to "create a new Classroom", where is asked, number of computers, what are the applications, begin of class date, name of teacher... I know that I can associate some fields when I am doing a request offering
    creation, like Title, Description, Urgency. But how can I do to other fields that I want to have in my specific Incident Form to "create a new Classroom"?
    Thank You.

    Hi andrepedrosa !
    If you want mandantory fields which should NOT show up in the Console-Forms,use
    Request Offerings in the SSP. there you can define Must-have fields and pump the data
    whereever you want.
    R.

  • Single document release - License type

    Dear all,
    We are facing an issue, when rechecking the old import documents which are assigned with License (Created with license type - single document release) are getting legal control block now. The license is not getting recognized for the document.
    Before rechecking, the documents were not under any legal control block and the licenses (Single document release - license type) were recognized. What would be the reason behind this? What are the settings to be done specific to single document release- license types?
    Kindly share your comments.
    Thanks in advace!

    Hi Balu,
    It also depends on what option was selected when you had manually assigned the licenses to the documents in the past. If it had been B1 System, Manually changed, Cannot be changed by system. This wouldn't have happened.
    Now as Aman said, you will have to reassign the licenses to those documents.
    I personally feel there is a drawback for Purchase orders in terms of recheck.
    Basically a document becomes not valid for re-check or re-determination based on following criteria
    1) If its a sales order item- As soon as the order is delivered, the sales order becomes not relevant for check. Which makes sense as the subsequent document is generated. If you check the log, it would say Items not relevant for check.
    2) If its an outbound delivery item- As soon as the delivery is PGI'd, it becomes not relevant for check.
    3) But for Purchase order- The criteria is set as deletion indicator- Which means, a PO item is relevant for re-check in GTS unless and until it is deleted. Even  if a delivery is generated for a STO line item, the PO item is considered as relevant for re-check. This had bitten me in the past.
    If you don't remember the manual assignment option selected. Can you check the control settings for Legal control- your legal regulation and see what's set for Manual assignment default. If it's not B1, you may consider changing it.
    Regards
    Dhilipan

  • License Types in license determination.

    Hi Experts,
    I have some doubts on License or legal cotrol (Export/Imports).
    1. Can any one give me some examples of license types.
    2. Which type of products required licenses and
    3. what are the different types of license available for exports to US. and Exporting From U.S to E.U or Other countries.
    Please help on this questions .
    Appreciate for helpful answer.
    Thanks & Regads,
    Hari.

    Hi Hari,
    That’s a question, I was now expecting from you.
    Specifically, In US Scenario, we have two kinds of licenses to be obtained from Federal Department of Commerce. These are broadly classified as General Licenses and Validated Licenses.
    1.     General Licenses:- This is a class of licenses, which can be used by the concerned party directly without any approval from the Government Authorities as soon as its fits a scenario like for the case of License Type EXCPT—License Exception.
    2.     Validated License Types: - This is class of License which requires prior Approval from the Government Authorities as soon as its fits a scenario like for the case of License Type VL, IVL , IVLP, DSP5 etc.
    In this case, there is a further classification as follows:-
    VL-->Validated License Type. This is for the above mentioned conditions but without any specific case.
    IVL--> Individual Validated License Type. This is again with the above mentioned case but for a specific quantity of a particular product.
    IVLP-->Individual Validated License Type (Partner Specific). This is again with the above mentioned case but for a specific quantity of a particular product and for a specific partner involved.
    DSP5 etc.--> DSP-5 Application /License for Permanent Export of Unclassified Defense articles and related unclassified data. These classes of License types are specifically to adhere to the ITAR regulation of US Government to ensure movement of Dual use and Defense Articles.
    I hope it was the required thing as asked by you.
    Regards,
    Aman

  • License type change in ECC PRD

    Hi All,
    Currently all user id is being created in ECC system through HR trigger and default license type is mySAP ERP ESS User. but i want to create deterrent request type to up update license type from mySAP ERP ECC User to mySAP ESS Processional.
    can you please help me how to configure to update license type.
    Regards,
    Arif

    Hi Arif
    Run transaction USMM in ECC. In there you set the default user type (license type).
    The user types that show up or can be defined depends on the Price List selected.

  • Executing SCVMM PowerShell scripts via C# conditionally works depending on application type

    I suspect that this is the wrong forum but I could not find one that was appropriate.
    The environment is SCVMM 2012 R2. I have a series of PowerShell scripts that are executed via C# code from a variety of applications -- MVC, WCF, console, unit tests. It seems that successful connection to the VMM server is dependent on the type of application
    being used. For example, console apps and WCF apps can connect successfully but the
    same code running in a unit test or standard MVC app throw the following exception:
    {You cannot access VMM management server SC-01. (Error ID: 1604)
    Contact the Virtual Machine Manager administrator to verify that your account is a member of a valid user role and then try the operation again.}
        CategoryInfo: {ReadError: (:) [Get-SCVirtualMachine], CarmineException}
        ErrorDetails: {You cannot access VMM management server SC-01. (Error ID: 1604)
    Contact the Virtual Machine Manager administrator to verify that your account is a member of a valid user role and then try the operation again.}
        Exception: {"You cannot access VMM management server SC-01.\r\nContact the Virtual Machine Manager administrator to verify that your account is a member of a valid user role and then try the operation again."}
        FullyQualifiedErrorId: "1604,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetVMCmdlet"
        InvocationInfo: Command = {Get-SCVirtualMachine}
        PipelineIterationInfo: Count = 0
        ScriptStackTrace: "at <ScriptBlock>, <No file>: line 1"
        TargetObject: null
    I suspect that somehow, each app is running under different credentials but I cannot see how that is possible. Each app exhibits the stated behavior whether running within Visual Studio (w/ IIS Express) [running under my own account] or published to the
    server running under a specific specified account that definitely has permissions to the VMM environment.
    This behavior is easily reproducible with the following code
    -- PS Script as embedded resource
    Get-SCVirtualMachine -VMMServer "SC-01"
    -- C# code to load and execute script
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Management.Automation;
    namespace LabManagement {
    public class HyperVVirtualMachineManager {
    public IEnumerable<Models.VirtualMachine> GetVirtualMachines() {
    var vms = new List<Models.VirtualMachine>();
    try {
    using (var rs = System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspace()) {
    rs.Open();
    using (var ps = PowerShell.Create()) {
    ps.Runspace = rs;
    var assembly = System.Reflection.Assembly.GetExecutingAssembly();
    var scriptName = "LabManagement.Scripts.GetAllVirtualMachines.ps1";
    using (var s = assembly.GetManifestResourceStream(scriptName)) {
    using (var reader = new System.IO.StreamReader(s)) {
    var script = reader.ReadToEnd();
    ps.AddScript(script);
    var output = ps.Invoke();
    if (ps.Streams.Error.Count > 0) {
    foreach (var item in ps.Streams.Error) {
    // do something
    if (output.Count > 0) {
    foreach (var o in output) {
    // do something
    rs.Close();
    catch (RuntimeException ex) {
    // do something
    return vms;
    -- Console app (Success)
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    namespace VirtualLabManagement.ConsoleTests {
    class Program {
    static void Main(string[] args) {
    // Arrange
    var svc = new LabManagement.HyperVVirtualMachineManager();
    // Act
    var hosts = svc.GetVirtualMachines();
    // Assert
    -- Unit Test (Fails)
    [TestMethod]
    public void TestMethod1() {
    // Arrange
    var svc = new LabManagement.HyperVVirtualMachineManager();
    // Act
    var hosts = svc.GetVirtualMachines();
    // Assert
    Assert.IsNull(hosts);
    As you can see, the code is exactly the same between the different executions but the ability to connect differs.

    Hi Sir,
    I would like to check the following items:
    1. "a variety of applications -- MVC, WCF, console, unit tests." they are all installed on same computer?
    2. VMM server still installed on same computer as these app resides in ?
    (if it is possible please detail the topology of the environment )
    If they are running at same account on same computer , I would suggest you to post this issue into Code UI forum for further assistance :
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vstest
    Best Regards,
    Elton JI
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Report generation for users having specific license type

    Hi friends,
    For my project purpose i have to generate report which has userId,License type of the user,corresponding composite role and single roles assigned to the user and transaction code.
    I can get the report for user and license type from USR06 and roles,transaction from SUIM.
    But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
    Thanks in advance,
    With kind regards
    Karthick

    > For my project purpose i have to generate report which has
    userId,
    License type of the user, TCode:  USMM
    corresponding composite role and single roles assigned to the user and transaction code.
    1. Table:  AGR_USERS, AGR_TCODES / USR08
    2. SUIM -> a) Users by Complex selection criteria -> Execute -> Click on Roles => Full list of Roles per user.
                 -> b) Transaction -> Executable for users (all selection option)
    >
    > I can get the report for user and license type from USR06 and roles,transaction from SUIM.
    >
    > But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
    1. As mentioned by Saby: use TCode SQV1 to map all the tables with a meaningful "foreign key".
    2. Download all Table contents and map them in excel by using functions.
    Regards,
    Dipanjan

Maybe you are looking for