LR 5 does not want to synchronize one specific folder?

I have recently updated to LR 5 on a new computer (Win 8 - with 32GB RAM) and created the catalogs (I have 3 different catalogs) without any problem at all. But just found out that inside a series of folder, one was missing. The folder is on the drive, recognized by LR5 (even shows the count of images) but when I hit "synchronize" it runs - shows task completed, then receive a message that there is no images or videos were found. On my other computer, it sync perfectly with LR 4.4.
I have tried to used the add folder command - same issue. I have deleted the folder completely from my hard drive and copy it from my old computer (which sync in LR 4) and reinstalled it on the new computer - still unable to synchronize and add the folder with the images. I am very experienced with catalog, adding folders, synchronizing and I have never encouter this problem before. Anyone there has an idea? Seems like a bug to me but not sure what the heck is going on? My catalog contains many folders and subfolders and all is fine except for only one folder....????

Hi Joyce,
I believe you wish to get the Lightroom CC on your machine.
Please refer to the link below to download Lightroom CC:
New Adobe Lightroom 6 (CC) Direct Download Links – Free Trials | ProDesignTools
Regards,
Sheena

Similar Messages

COMPUTER DOES NOTE WANT TO SYNCHRONIZE WITH BLACKBERRY Q10

Hi,
MyBB Q10 is connected through USB cable to my computer.
Blackberry Link says :
BLACKBERRY-E64F connected
but communication with the Smartphone impossible.
Disconnect the smartphone and try again
or download the software again !
So I cannot synchronize my calendar...
Can someone help ?

Did the Support Article you linked from not help you resolve your issue..?
iOS: Forgotten passcode or device disabled after entering wrong passcode

I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

Can someone please help me get my iPhone to sync to your computer?
I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?

Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

HT1918 I have 2 Apple ID's, how do I delete the old one as its interferring with my new account and the music I have already purchased through ITunes does not want to play. Any suggestions?

I have 2 Apple ID's, how do I delete the old one as its interferring with my new account and the music I have already purchased through ITunes does not want to play. Any suggestions?

Why would you create a new account?
All purchases will be tied to the account from which they were purchased.
You will have to authorize your computer for all the accounts from which music is purchased.

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks

sgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

My computer(mac) was broken, I buy a new one. Photoshop element (buyed on ligne from adobe) does not want to open now.

how can I fix the trouble with Adobe

one of many duplicates.
see;
my computer(mac) was broken, I buy a new one. Photoshop element (buyed on ligne from adobe) does not want to open now.

I do not know what happened, all of a sudden Firefox does not want to work anymore. Had been conected to audible. Retried about 4 times.... no luck had to force

I do not know what happened, all of a sudden Firefox does not want to work anymore. Had been conected to audible. Retried about 4 times.... no luck had to force quit every time. The three Firefox app. into garbage, emptied garbage and redownloaded new version from Firefox. Reinstalled but same thing happened again... no connection.
What can I do, I like Firefox better than Safari, had it for years on my Mac.
Please let me know.
(Note: I have also mentioned this on the automatic response to the malfunctioning).
'''''Email removed by moderator to protect you from spam'''''

Hey.
I think it might be the problem with one of your plugins.
Try to uninstall the webbrowser AND remove the storage from Firefox in your user-account (Linux: /home/username/.mozilla). You can check the list of installed Add-Ons in Firefox under "Extras => Add-ons" or by pressing Shift + Strg + A (Linux).

HT1689 how can i undisable my ipod touch when itunes does not want to connect?

My brother's ipod touch 4th generation was cracked on the screen and was not able to see anything after a while. We finally fixed it and now it says "IPOD DISABLED CONNECT TO ITUNES". We tried connecting it and itunes does not want to connect because it says that the ipod has a passcode and until we unlock it, it will do it. So we our stuck and on top of that, the ipod's power button does not work, so we waited to uncharge the ipod so we can try to connect it again and it still won't do it. We do not know what to do, and we cannot afford to buy a new one. Is there a solutiong for this? Thank You.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.

Trying to update my Itunes software, now it does not want to work at all, givin strange error messages.
First, when trying to sync ipod touch to Itunes, nothing happened. After that, Itunes suggested downloading and installing updates but now updates will not finish installation correctly and launch error messages. Any ideas?
TKS !

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736B3s, or a different error code? If they're different, what codes are you getting in Windows Update?

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.

I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.
Basically your player is telling you that you need to install the codecs that will play the compressed data within the AVI file.
AVI is a legacy file container in which the tracks of data are interleaved to maintain synchronization. This data can be encoded using many different audio and video codecs. Your problem is to determine which codecs you need for the player you are trying to use and install them if they are available. Failing that, your will either have to play the files in a different player which has the codec support your require built into the app or convert the content to a compression format that is natively compatible with the player you wish to use.
Since you have not stated what platform, operating system, and particular player you are targeting for playback, it is difficult to provide precise instructions for fixing your specific problem at this point. Suggest you try alternative players compatible with your system and platform to see if they will play the files, use a dedicated media information utility to determine the codecs needed for playback, or post a sample file for analysis.

Macbook pro does not want to start up

Hi! I am having issues with my MacBook Pro. What's happening is that when I turn it on it does not want to load anything. I push the power button and the apple logo comes up and the little loading symbol at the bottom just keeps going around and around. I've left it on for about an hour straight to see if it finally loads or if anything happens and still I get no where. Has anyone had this issue before and if so, how was it resolved? I don't have the extend warranty from apple, so they're charging my $20 right off the back to use over the phone service. I have no problem paying for it, just rather see if there is a simple free way to get it fix instead of having to pay just to talk to someone over the phone. I also can't remember what operating system I am running on. PLEASE HELP!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

[BUG] Adobe Bridge does not support OSX 10.10's "Go Back" keyboard shortcut and does not have a custom one.

Adobe Bridge does not support OSX 10.10's "Go Back" keyboard shortcut which is `command + shift + [` and does not have a custom one.
I tried "delete" key which is backspace for Windows. It will do delete identical to "delete X" key (which is delete key for Windows).
Sidenote: `command + shift + \` is to go back in views (switch views), not folder structure.

Exactly where do you want to use a GO BACK "shortcut" in Bridge? Maybe I don't even understand what you mean by Go Back. Bridge is only a file browser, nothing more. It doesn't open, edit, manipulate or save files at all.
Are you simply referring to going back to view a folder that you viewed before?
Please don't take this a criticism. As someone who will gladly pay money not to have to learn any shortcuts at all, I'm just puzzled and curious, that's all.

Photoshop does not want to print in color anymore

Since last Friday Photoshop does not want to print in color anymore.
I am working with a Mac OS X 10.7 and a Canon Pixma printer.
When printing from the web the printer prints in color, but when I try to print a picture from Photoshop CC the picture is printed in B&W.
Can any one help me understand what is going on here?
Printer and Photoshop have always printed in color and in grayscale with no major problem till now.

Definitely check your Print settings. If you have more than one tray, they can be set differently from each other. You could be on the wrong tray as determined by your paper settings in Photoshop's Print dialog.
Here is a Help document on this subject.
Troubleshoot printing problems | Photoshop
Two ideas that stand out:
Press the Spacebar on your keyboard before you click File > Print. This process resets printer preferences that have been written into the image.
Reset Preferences: hold down cmd-opt-shift and start Photoshop. Release the keys when the "delete photoshop settings file" dialog appears and click "Yes".

HT204365 Hi I wonder if you could please assist me. I tried the online 'contact us" I chose my iPad - but when I need to chose the second part - it does not give me any options - hence I cannot go further? My kindle does not want to open on my iPad.

Hi
I wonder if you could please assist me. I tried the online 'contact us" I
chose my iPad - but when I need to chose the second part - it does not give
me any options - hence I cannot go further?
My kindle does not want to open on my iPad. When I touch it - a grey screen
with kindle written in the middle appear for a few seconds. Then goes away.
I have restarted the iPad - still the same? What else can I do?
Thanks
Maryna

Judging by the reviews of the current version of the Kindle app you aren't the only one haveing problems with it - it looks like Amazon need to fix something with the app.
Have you tried closing the Kindle app via the iPad's multitasking bar and seeing if it works when you re-open it ? Double-click the home button to open the taskbar, and then swipe or drag the Kindle app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
You could also try deleting the app and redownloading it via the Purchased tab in the App Store app on it (you will then need to redownload your books in the app, assuming that it opens).

LR 5 does not want to synchronize one specific folder?

Similar Messages

Maybe you are looking for