LR 5 issues with catalog on external drive - laptop works fine, iMac does not.

I've just upgraded from LR 2 to LR 5 on my mac laptop and simultaneously gotten an iMac, on which I installed LR 5. I'm trying to work on both, so updated my catalog to a new location on the same external drive as my photos. Everything works fine on my laptop, but I'm having major issues on the iMac: the program finds my photos, but does not display them (just a gray box where they should be). I sometimes get an image if I go into Develop, and then it will show up in the bottom bar among all the gray boxes. When I go into a folder I just created, I get a message about "Access Denied" but am able to work with this folder just fine on my laptop. Please help!

You need to check all permissions for the drive I believe.

Similar Messages

  • Can you upload Logic pro onto an external drive? Because my G5 does not  have 50 GB available for installation, Can you upload Logic pro onto an external drive? Because my G5 does not  have 50 GB available for installation

    Can you upload Logic pro onto an external drive? Because my G5 does not  have 50 GB available for installation, Can you upload Logic pro onto an external drive? Because my G5 does not  have 50 GB available for installation

    Logic 9.0.2 is the last version that runs on a G5 - 9.1.x is Intel only.
    If you have only 50 GB left on your system drive, you should consider it full. Get an external drive and move your music, movies and photo's to it, and delete them from your system drive to free up space.
    The free space on the system drive is being used by the OS to offload RAM, rule of thumb is to keep at least 20 % of the drives' capacity free. When you have less and less free space, your Mac will eventually become very slow (many "beachballs").
    I believe the current Logic Package has version 9.1 on it, be sure you have the correct (9.0) version...

  • Trying to see DVD drive through DVD sharing. iMac does not see MacBook. DVD sharing is ON.

    I have an iMac with a non-working DVD drive and I'm trying to install Snow Leopard from my MacBook's DVD drive. I have turned DVD Sharing ON but the iMac does not see the DVD drive in Finder's Shared Devices. I have tried FireWire, LAN through TimeCapsule and WiFi. Am I missing a step?
    The iMac and MacBook are both late 2007 purchases and have 10.5.8.
    Thanks for any help.

    Two commands you need to type in terminal on the computer that has the dead drive. 
    Disk sharing like the macbook air does is one of those things that's included in all OS X's on all computers, but that is not enabled.  (I think it's cause apple doesn't want to have to support it on more devices that they absolutely have to)
    So here's how you enable it. 
    In your Utilities Folder, open Terminal
    copy and paste each line:
    sudo -s
    *type your password*
    defaults write com.apple.NetworkBrowser EnableODiskBrowsing -bool true defaults write
    com.apple.NetworkBrowser ODSSupported -bool true
    shutdown -r now
    Okee dokee... That last command will restart your computer, then you're off to the races!

  • Issues With 2 TB External Drive via USB

    I've had the Extreme sine August and everything about it has worked great. I had a Seagate 500 GB external drive connected to it and all of my devices could access it and use it.
    Now, I upgraded to a 2 TB Seagate Free Agent and I can't get it to work with the Airport Extreme.
    The 2 TB drive shows up in Airport Utility, works fine when connected directly to the computers, is brand new with 3.0 capabilities (although nothing in my setup is usb 3.0) and has been tested as both OS X Journaled and FAT32.
    I've seen one publicly posted issue around this drive (unresolved), and have noticed a couple unresolved issues with drives this size not working via USB on the Extreme.
    Is the Airport Extreme just not handling 2 TB drives?
    Is there something I'm missing?
    Is there anything somebody else has done to make a drive work that wasn't?
    Any suggestions would be greatly appreciated...
    Thanks.

    I bought two Seagate GoFlex 2TB drives from CostCo @ $99 each. I formatted both drives as Mac OS. One of the two showed up with NO Disk Need Repair error and worked great but I couldn't get the second one to work. After physically attaching both via USB to my MBP, I formatted the second one again as Mac OS Extended (Journaled) to no avail. Then I checked the first one and found the discrepency. The first one was formatted as Mac OS in the DISK and in the VOLUME. The second one was only formatted as Mac OS in the Volume. The "DISK" part was still in the original facotry format of MS-DOS (FAT). I had forgotten to format the "DISK". Once I re-formatted the "DISK" as Mac OS then hook up to the USB hub to the ABE, a sweet success!

  • I am facing toggle issue with firefox 4. It is working fine in firefox3.x

    I am working on BIRT reports. I am facing toggle issue with Firefox 4.0. The code is working fine in Firefox 3.x. Please find the code below. the javascript method itself not calling. Please help me as early as possible.
    <text-property name="content"><![CDATA[<a href="javascript:toggleDetails('AR')"><img border="0" align="ABSMIDDLE" src="rplus.gif" id="ARimg"/></a>Authentication Result]]></text-property>

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • Acer R7 571G touch screen with PhotoShop. Art Rage 3 works, but PS does not.

    The title says it all. Does anyone have/had this problem?
    I've been looking all over the place for a solution but nothing works. I tried adding the PSUserConfig.txt to the adobe PS CC 2014 Settings as mentioned on one of the websites but it still doesn't work.
    My problem is that I can't draw using a brush with the pen provided with the laptop. I tried it with art rage 3 and it works. Am I missing a certain setting in PS to enable it?
    If anyone can shed some light on my problem that would be great!
    Thanks.

    The title says it all. Does anyone have/had this problem?
    I've been looking all over the place for a solution but nothing works. I tried adding the PSUserConfig.txt to the adobe PS CC 2014 Settings as mentioned on one of the websites but it still doesn't work.
    My problem is that I can't draw using a brush with the pen provided with the laptop. I tried it with art rage 3 and it works. Am I missing a certain setting in PS to enable it?
    If anyone can shed some light on my problem that would be great!
    Thanks.

  • MacBook problems with Snow base station - other laptops work fine

    Hi,
    I just purchased a new MacBook to replace an iBook G4 800.
    My snow base station works fine with the old iBook G4 (which has an extreme card) and with a borrowed PowerBook G4 Aluminum 1.5 GHz (also extreme card) but will not work with my new Mac Book. Every time I try to connect - I receive an error "There has been an error accessing "my name" 's network. Sometimes it will connect, other times (most of the time), it will not.
    My MacBook connects fine to my neighbors Linksys access points and our work Lucent access points (which are b also - snow is b).
    I did a search and am reading other people having similiar problems. I was wondering if anyone has resolved their problems. I spent 2 plus hours on the phone with Apple yesterday. They are placing the blame on the older base station (snow) but it is obvious that snow is working fine for other computers.
    Theresa

    I am still a little confused. I can be 2 feet from my base station and will keep hitting "try again" when trying to access my network and will get "an error has occurred" many times and eventually it will connect and I will have an incredibly strong signal. My MacBook will continue to have a great strong signal until it goes to sleep and then I will have a difficult time connecting again. My neighbors base station is a weak signal and I can easily join their network. Every time I connect, I have problems but once connected, it is great.
    I guess it can be interference but I am now wondering if it is related to the snow/graphite base station only. This laptop has no problems joining other b base stations.
    I spent hours on the phone with an Apple wireless support specialist the other night. He wants me to try an Extreme base station. He didn't indicate that he was aware of any MacBook problems (and he mentioned interference and we setup my laptop to only join my network and it didn't make a difference).
    More to come.... IF anyone switched to a Extreme Base Station and that worked fine - please let me know. Though I sort of resent having a functional b base station that works with every other laptop and have to spend $200 towards another base station because of a new laptop.

  • Scan issues with HP Officejet Pro 8600 that worked fine!Now, I have a problem----is it Dropbox?

    Never had a problem, but now when I scan, and it goes straight to My Documents,  when I go to open it, it's been replaced by an old picture.  Every one of my darn documents has that old picture and I can 't find any of my documents.  Please help. I do not have it hardwired in.  I have reset the printer and my laptop, but this started a few months ago and I think it has to do with Drop box.  I don't know what else to do.

    Hi @joann2164
    Welcome to the HP Support Forums.  From your post, I understand that you are trying to scan to DropBox using one of the apps found on the front panel of your Officejet Pro 8600 printer.
    For this issue, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Are you having problems with the Lacie external drive after upgrading to the new operating system

    Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

    See here for everyone discussing the issue you are having:
    https://discussions.apple.com/thread/5475136?tstart=0

  • Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

    Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

    there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

  • I recently purchased a new iMac with an external drive.  I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac.  Comments?  Help?

    I recently purchased a new iMac with an 1 Terrabyte external drive.  I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac.  I have not downloaded the external drive's software onto my old Mac because of this concern.  May I simply "drag and drop" the contents I want transferred to the external drive, then set up my new Mac with the drive and download there? or is there a better procedure?  Comments?  Help?

    If your intention is to copy a just documents and data (word processing files and music for example) then yes, you can use drag and drop. If you want to transfer data and applications and permissions, it would actually be easiest to connect the drive to your old computer and turn on TimeMachine. Once TM is finished, connect the drive to your new computer and restart it holding the option key to get into Recovery mode. Then you can use the restore from TM option to transfer your data and programs to the new computer.

  • Macs or mac mini work with blu ray external drives even XL DISC CAPACITIES

    macs or mac mini work with blu ray external drives (BURNERS) even XL DISC CAPACITIES like 128GB?

    https://discussions.apple.com/docs/DOC-2881

  • Weird issues with latest X-Fi Driver/Software

    -Weird issues with latest X-Fi Driver/SoftwareO So I decided to update my X-fi drivers and software today, but I am running into some issues.
    First and foremost is that my Volume Panel no longer works correctly. It brings up this cheap pos window when I click on the Systray icon instead of the corrrect full featured interface.
    It lists the merdia source programs and has a volume dial, thats all this new one has.
    The other issues are that none of the software updates want to install: Alchemy, Mixer, Mediasource Go
    They all give me a message after I being to install that says "can not locate layout.bin please specify the path"? and gives my a "this setip reqires a cd" window and lists a path to a temp folder inside my windows folder.
    Installing these for Vista? Ultimate 32-bit.

    -Weird issues with latest X-Fi Driver/SoftwareO So I decided to update my X-fi drivers and software today, but I am running into some issues.
    First and foremost is that my Volume Panel no longer works correctly. It brings up this cheap pos window when I click on the Systray icon instead of the corrrect full featured interface.
    It lists the merdia source programs and has a volume dial, thats all this new one has.
    The other issues are that none of the software updates want to install: Alchemy, Mixer, Mediasource Go
    They all give me a message after I being to install that says "can not locate layout.bin please specify the path"? and gives my a "this setip reqires a cd" window and lists a path to a temp folder inside my windows folder.
    Installing these for Vista? Ultimate 32-bit.

  • I am having an issue with a USB flash drive.

    Hello, I am having an issue with a USB flash drive. I have a 2012 iMac OS X 10.9. Drive keeps on disconnecting after about 30 seconds. I tried to reformat through Disk Utility but doesn't allow me to verify or repair as it disconnects. This same drive works fine on Windows machines. I tried all USB ports but all give the same issue. Message is: "Disk Not Ejected Properly. Eject "No Name" before disconnecting or turning off." When I attempt to copy data from the disk it comes up with the message: "The Finder can't complete the operation because some data in "" can't be read or written (Error code -36)". I believe the solution for this error is to format the drive but as mentioned this function doesn't work. I need to copy data from a Windows machine to my iMac. Any suggestions with this is appreciated. Thanks!

    I went back to a Windows machine, formatted it to NTFS (so lost the data but had a backup), recopied the data. Went back to the Mac but same issue happened after I tried copying the data "Disk Not Ejected Properly - Eject " " before disconnecting or turning off." One of the USB ports didn't detect the 32GB flash drive at all. And disconnected on another one.

  • Formatting an External Drive to work with Leopard AND a PC

    Hello,
    I have 400 GBs of video footage on an external drive that only works with PCs.
    I need to get this material onto my Mac running OSX Leopard.
    I am guessing that my best option is to format a second external drive to work both with Leopord and Windows. Then transfer the footage onto the 2nd external drive via a PC.
    Any suggestions?
    Thanks,
    Marc Griffin

    What size is this HD? FYI, FAT32 has a 2TB limit on partition size & a 4GB limit on file size.
     Cheers, Tom

Maybe you are looking for

  • Still can't open in CS3 from LR 2.1

    I have updated to LR 2.1, re-installed Photoshop CS3, and done some other fiddles that were suggested in various places. But I STILL can't reliably send my files to PS the way you are supposed to. Sometimes when I right-click "Edit in PHotoshop CS3"

  • HT3819 Can my husband and I share our itunes music....if we have different sign in names?

    Id like to access my husbands music on his itunes account.  Is there a way to do that?  Will homesharing work?

  • Screen Personas - Document billing not found with ref. delivery

    Hi All,   I created a javascript button  for save first screen in va01 , after save Sales order, execute transactions :  Delivery (VL01N) / post goods isse and billing (VF01).   But  the process "Post goods issue" is realized  in update task and bill

  • Using IN Operator in Sql

    How can I run the following query with multiple parameters. Select empno,ename from emp where (empno,ename) in (7369,'SMITH',7900,'JAMES') What am I missing ? Best Regards, Luqman

  • Help! Run AIR Applications without Adobe AIR.

    Hello, I wanted to ask that is there any way to run AIR applications without having Adobe AIR in the computer. It's really annoying when you have to give someone your application to use and then the person needs Adobe AIR to run it. Any suggestions?