LR 6 = Big disappointment in performance and Fuji X support

Adobe announced, that LR 6 should use the GPU and process much faster. But this [url=Nachgemessen: GPU-Beschleunigung in Lightroom 6 und Lightroom CC | heise Foto]article[/url] and many users say, that it's even slower then LR 5.
And (for me) even worse, the processing of raw files from Fuji X cameras didn't improve. The files still look like watercolor paintings, when processed with LR 6!
I defended LR for some time and I waited for LR 6, because I hoped, that this will change. But now I'm thinking to switch to an other raw converter. There are some, which exhaust the great capabilities of the Fuji raw files. I tried to communicate with Adobe about this problem many times, but they still ignore me (and all other Fuji users).
@Adobe: You lost an once enthusiastic user and customer.
So long and thanks for all the fish.

No one from Adobe will say anything, and no one else knows.

Similar Messages

  • TS1538 Hi technical support Team of  Apple  I am sorry but this time  I am very disappointed with IPhone and  IOS 7.1, actually I have IPhone 5,5S both and I was trying to Restore  my Phone for sell Because I want to by IPhone 64 Gold but unfortunately   

    Hi technical support Team of Apple  I am sorry but this time  I am very disappointed with IPhone and  IOS 7.1, actually I have IPhone 5,5S both and I was trying to Restore  my Phone for sell Because I want to by IPhone 64 Gold but unfortunately    both phone stuck on recovery mode with error 1, and 3
    I got Error 3 on IPhone 5 and error 1 In IPhone 5s , I did lot of try as I can my level best , like Update iTunes, stop all security, change cable even change computer format my laptop and install everything fresh in window   I did try to with Mac of my friend,
    Change Internet connections try with DFU mode, Make DFU file Also with redsnow   everything I did
    Whatever on internet information like go to  cmd and run as administrator  to make change hosts file
    Like ipconfig/flushdns everything  everything  what I can….  but I dint get good results and  good information about this error
    Somebody told me this is hardware problem, I make change my battery and charging connector too.
    I don’t know what to do next.. because  I don’t leave any experiment on my stuck phone..
    Note : one  is big issue that apple support team  is also and giving good answer
    I am in Saudi Arabia so I don’t  have any nearest store of Apple.. even Saudi Is Big Consumer of IPhone
    Its Really Bad its big Loss of Money I can’t afford more , Now will not Buy Any IPhone  in future if I don’t get solution..
    Thank You..

    What the **** is this taht you will not provide any service due to just a bit jailbreak..
    we are not much tecnical person.. and mostly consumer dont have good idea about Jailbreak. make your device  much better secure from hacker and jailbreak please we cant afford much money please give me any solution i ll not do jailbreak again please  

  • A document page opens that is too big for the display and runs off the end of the monitor

    How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Performance and stability in 10.4.7

    I've had numerous performance and stability issues since the 10.4.7 update. Most noticeable are:
    1) It often take a long time to focus on windows. When I click on, say, a Terminal window, the window raises immediately but is not active for about 1-2 seconds. (The close/minimize/maximize lights on the titlebar remain gray and the window is inactive.) During this time, the Terminal process is takes 50-90% of the CPU, and then the SystemUIServer process hogs the CPU for the following 1-2 seconds. This behavior is not exclusive to the Terminal process; it happens to other windows too.
    2) When the system has been on screensave for a long time (say, >1 day), it becomes unresponsive to keyboard and mouse input and won't wake up. I usually have to power down the computer and reboot.
    Has anyone else noticed this with the current OS? Could it be my fault somehow? If not, is it likely to be fixed in 10.4.8?
    MacBook Pro Mac OS X (10.4.7) 1.5 GB memory

    1) It often take a long time to focus on windows. When I click on, say, a Terminal window, the window raises immediately but is not active for about 1-2 seconds. (The close/minimize/maximize lights on the titlebar remain gray and the window is inactive.) During this time, the Terminal process is takes 50-90% of the CPU, and then the SystemUIServer process hogs the CPU for the following 1-2 seconds. This behavior is not exclusive to the Terminal process; it happens to other windows too.
    This is unusual. My 10.4.7 is pretty instantaneous. It could be a sign that you are using something in the background that eats up the signal for graphics redraw. What third party software do you have installed? What peripherals do you have installed? Have you installed any Dashboard Widgets.
    2) When the system has been on screensave for a long time (say, >1 day), it becomes unresponsive to keyboard and mouse input and won't wake up. I usually have to power down the computer and reboot.
    Screen Saver or Energy Saver? Big difference here. Energy Saver could create such a situation especially with third party USB devices that are unfamiliar with Mac OS X's Energy Saver methods and send back signals expecting to receive back power and not getting it just as the machine wakes from sleep. If it is a Screen Saver, which Screen Saver? Have you tried to see if this happens without any pictures in your Pictures folder?
    Is your data backed up? Diagnosing issues which result from force shutting down may require hard drive repair utilities. And the same issues that come from that can have caused the freezing and slowdown you are experiencing, as well as show up on a hard drive that is dying. So it is critical your data is backed up before we diagnose further. See my FAQ on backing up:
    http://www.macmaps.com/backup.html

  • Performance and wrong internal priorities

    Ligthroom has very good functions.
    But with big databases the performance is bad or better the internal task priority is wrong:
    I have a 1 1/2 year old Windows XP pc with 4 GB RAM.
    For example:
    I have build a small database (name it SMALL_A) with about 1.500 pictures (.jpg, .tif, .cr2) and a big database (name it BIG_B ) with about 14.000 pictures. The pictures of SMALL_A are part of BIG_B.
    When opening BIG_B the lightroom.exe process uses for about three or four hours between 45% and 52%. During these three or four hours
    1. when working in the library module and you want to see a picture "fit in", you are waiting about 20 to 100 seconds till lightroom shows you the picture "fit-in". You further need 30 to 80 seconds to see the picture in 1:1.
    2. when your are working in the develop module and you want to save the metadata to file CTRL-S, after about 20 or 30 minutes the task starts to save the metadata. If you don't say CTRL-S, after 4 hours the task for saving the metadata starts.
    3. In the meantime lightroom checks all the pictures and their metadata (lightroom database and the original files).
    I think, in point 1 or 2 it is necessary, that the tasks 1 and 2 has much more priority than the task 3.
    After opening BIG_B next day, lightroom uses again 3 hours for task 3. Task 1 or 2 has too less priority.
    When using database SMALL_A, these problems doesn't exist.
    Achim Guhr,
    Germany

    thanks
    that's work.

  • Review after 1 Month: Usability, Performance, and still...Streaming Issues...

    After cruising around this board and others, I’m both very pleased with my Droid X and disappointed at the same time.  I have an iPhone and a Droid X because I own a company that develops software for both platforms.  Note that I have not “rooted” my phone.
    I’m pleased that there are lots of apps and that Verizon has done a good job of putting in some stock apps that are useful (docking, clocks, widgets). 
    What I’m displeased with is performance and usability.  Here are my chief concerns:
    There are times that the screen delay in contacts is five seconds.  I have about 650 contacts.
    After having a Blackberry for years, I miss not being able to just start typing a phone number and bring up a list of likely names.
    The iPhone has search integrated at the top of the screen.  It saves one keystroke and one screen refresh.
    Dialing an existing number requires two or three more steps than most phones.  Short cuts still require two steps.  The people short cuts are not very manageable.
    I would like to reassign the search button from the home screen to search my contacts.  I’m not quite into searching the web from the home screen.  It’s my contacts I need.
    I de-installed literally everything that keeps running that I know I don’t need or I do frequent force stops (like Facebook and Skype).  Even though I’m on a data plan, I don’t want to use bandwidth  and I don’t want these apps tracking my entire existence.
    I too agree with everyone’s sentiments that not being able to de-install products like Amazon, Skype, etc are not in keeping with the concept of “Open” platform.  Let the user decide.  Don’t let your marketing agenda get in the way of people being happy with their products.
    I have no desire to purchase an app that fixes a problem...ala short cuts, screen savers, etc.
    I truly wish Verizon would fix streaming soon.  I built an app that runs on every other Android 2.2 device except the Droids.  Do you realize how frustrating it is to know the phone you own won’t run the apps you built?  LOL!
    Best Wishes – I hope this phones do well!!!

    JackDroid wrote:
    No disrespect but it seems you might want to get more familiar with your device because most of the things you reported as a issue the phone does now without issues.
    What I’m displeased with is performance and usability.  Here are my chief concerns:
    After having a Blackberry for years, I miss not being able to just start typing a phone number and bring up a list of likely names.
    You can do this, just open Phone Dialer on contacts tab and then press menu button for 3 seconds and keyboard shows and all you have to do is type name.
    The iPhone has search integrated at the top of the screen.  It saves one keystroke and one screen refresh.
    Android has easier way, just press search button 3 Second (Far Right) and say "Call NAME" and phone dials or shows contact info. 
    Dialing an existing number requires two or three more steps than most phones.  Short cuts still require two steps.  The people short cuts are not very manageable.
     When searching for number all you have to do in press green phone icon to instant call..
    I would like to reassign the search button from the home screen to search my contacts.  I’m not quite into searching the web from the home screen.  It’s my contacts I need.
    The voice command app will open contact by just press search button for 3 second and say name to search contacts. 
    I truly wish Verizon would fix streaming soon.  I built an app that runs on every other Android 2.2 device except the Droids.  Do you realize how frustrating it is to know the phone you own won’t run the apps you built?  LOL!
    What problem are you having with streaming? I use iHeartRadio for streaming radio stations from many citys without issues.

  • Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

    Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

    The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

  • QUERY PERFORMANCE AND DATA LOADING PERFORMANCE ISSUES

    WHAT ARE  QUERY PERFORMANCE ISSUES WE NEED TO TAKE CARE PLEASE EXPLAIN AND LET ME KNOW T CODES...PLZ URGENT
    WHAT ARE DATALOADING PERFORMANCE ISSUES  WE NEED TO TAKE CARE PLEASE EXPLAIN AND LET ME KNOW T CODES PLZ URGENT
    WILL REWARD FULL POINT S
    REGARDS
    GURU

    BW Back end
    Some Tips -
    1)Identify long-running extraction processes on the source system. Extraction processes are performed by several extraction jobs running on the source system. The run-time of these jobs affects the performance. Use transaction code SM37 — Background Processing Job Management — to analyze the run-times of these jobs. If the run-time of data collection jobs lasts for several hours, schedule these jobs to run more frequently. This way, less data is written into update tables for each run and extraction performance increases.
    2)Identify high run-times for ABAP code, especially for user exits. The quality of any custom ABAP programs used in data extraction affects the extraction performance. Use transaction code SE30 — ABAP/4 Run-time Analysis — and then run the analysis for the transaction code RSA3 — Extractor Checker. The system then records the activities of the extraction program so you can review them to identify time-consuming activities. Eliminate those long-running activities or substitute them with alternative program logic.
    3)Identify expensive SQL statements. If database run-time is high for extraction jobs, use transaction code ST05 — Performance Trace. On this screen, select ALEREMOTE user and then select SQL trace to record the SQL statements. Identify the time-consuming sections from the results. If the data-selection times are high on a particular SQL statement, index the DataSource tables to increase the performance of selection (see no. 6 below). While using ST05, make sure that no other extraction job is running with ALEREMOTE user.
    4)Balance loads by distributing processes onto different servers if possible. If your site uses more than one BW application server, distribute the extraction processes to different servers using transaction code SM59 — Maintain RFC Destination. Load balancing is possible only if the extraction program allows the option
    5)Set optimum parameters for data-packet size. Packet size affects the number of data requests to the database. Set the data-packet size to optimum values for an efficient data-extraction mechanism. To find the optimum value, start with a packet size in the range of 50,000 to 100,000 and gradually increase it. At some point, you will reach the threshold at which increasing packet size further does not provide any performance increase. To set the packet size, use transaction code SBIW — BW IMG Menu — on the source system. To set the data load parameters for flat-file uploads, use transaction code RSCUSTV6 in BW.
    6)Build indexes on DataSource tables based on selection criteria. Indexing DataSource tables improves the extraction performance, because it reduces the read times of those tables.
    7)Execute collection jobs in parallel. Like the Business Content extractors, generic extractors have a number of collection jobs to retrieve relevant data from DataSource tables. Scheduling these collection jobs to run in parallel reduces the total extraction time, and they can be scheduled via transaction code SM37 in the source system.
    8). Break up your data selections for InfoPackages and schedule the portions to run in parallel. This parallel upload mechanism sends different portions of the data to BW at the same time, and as a result the total upload time is reduced. You can schedule InfoPackages in the Administrator Workbench.
    You can upload data from a data target (InfoCube and ODS) to another data target within the BW system. While uploading, you can schedule more than one InfoPackage with different selection options in each one. For example, fiscal year or fiscal year period can be used as selection options. Avoid using parallel uploads for high volumes of data if hardware resources are constrained. Each InfoPacket uses one background process (if scheduled to run in the background) or dialog process (if scheduled to run online) of the application server, and too many processes could overwhelm a slow server.
    9). Building secondary indexes on the tables for the selection fields optimizes these tables for reading, reducing extraction time. If your selection fields are not key fields on the table, primary indexes are not much of a help when accessing data. In this case it is better to create secondary indexes with selection fields on the associated table using ABAP Dictionary to improve better selection performance.
    10)Analyze upload times to the PSA and identify long-running uploads. When you extract the data using PSA method, data is written into PSA tables in the BW system. If your data is on the order of tens of millions, consider partitioning these PSA tables for better performance, but pay attention to the partition sizes. Partitioning PSA tables improves data-load performance because it's faster to insert data into smaller database tables. Partitioning also provides increased performance for maintenance of PSA tables — for example, you can delete a portion of data faster. You can set the size of each partition in the PSA parameters screen, in transaction code SPRO or RSCUSTV6, so that BW creates a new partition automatically when a threshold value is reached.
    11)Debug any routines in the transfer and update rules and eliminate single selects from the routines. Using single selects in custom ABAP routines for selecting data from database tables reduces performance considerably. It is better to use buffers and array operations. When you use buffers or array operations, the system reads data from the database tables and stores it in the memory for manipulation, improving performance. If you do not use buffers or array operations, the whole reading process is performed on the database with many table accesses, and performance deteriorates. Also, extensive use of library transformations in the ABAP code reduces performance; since these transformations are not compiled in advance, they are carried out during run-time.
    12)Before uploading a high volume of transaction data into InfoCubes, activate the number-range buffer for dimension IDs. The number-range buffer is a parameter that identifies the number of sequential dimension IDs stored in the memory. If you increase the number range before high-volume data upload, you reduce the number of reads from the dimension tables and hence increase the upload performance. Do not forget to set the number-range values back to their original values after the upload. Use transaction code SNRO to maintain the number range buffer values for InfoCubes.
    13)Drop the indexes before uploading high-volume data into InfoCubes. Regenerate them after the upload. Indexes on InfoCubes are optimized for reading data from the InfoCubes. If the indexes exist during the upload, BW reads the indexes and tries to insert the records according to the indexes, resulting in poor upload performance. You can automate the dropping and regeneration of the indexes through InfoPackage scheduling. You can drop indexes in the Manage InfoCube screen in the Administrator Workbench.
    14)IDoc (intermediate document) archiving improves the extraction and loading performance and can be applied on both BW and R/3 systems. In addition to IDoc archiving, data archiving is available for InfoCubes and ODS objects.
    Hope it Helps
    Chetan
    @CP..

  • Is there any way I can get back to ios6 on my iPad? The new ios7 is a major disappointment, especially visually, and would love to "downgrade" back to ios6. Any advice how to do this?

    Is there any way to downgrade back to ios6 from the new ios7? I made a major mistake in downloading the new operating system. It is a major disappointment, particularly visually, and would love to get back to the more user friendly ios6 on my iPad. Last time I experienced a similar disappointment was when I tested the new Microsoft 8. In that case I was luckily able to stick to the previous operating system.

    Thanks. Pitty, seems like Apple suddenly created more competition for itself. The edge is gone and Apple is also now into "art for art's sake".

  • I need a clarification : Can I use EJBs instead of helper classes for better performance and less network traffic?

    My application was designed based on MVC Architecture. But I made some changes to HMV base on my requirements. Servlet invoke helper classes, helper class uses EJBs to communicate with the database. Jsps also uses EJBs to backtrack the results.
    I have two EJBs(Stateless), one Servlet, nearly 70 helperclasses, and nearly 800 jsps. Servlet acts as Controler and all database transactions done through EJBs only. Helper classes are having business logic. Based on the request relevant helper classed is invoked by the Servlet, and all database transactions are done through EJBs. Session scope is 'Page' only.
    Now I am planning to use EJBs(for business logic) instead on Helper Classes. But before going to do that I need some clarification regarding Network traffic and for better usage of Container resources.
    Please suggest me which method (is Helper classes or Using EJBs) is perferable
    1) to get better performance and.
    2) for less network traffic
    3) for better container resource utilization
    I thought if I use EJBs, then the network traffic will increase. Because every time it make a remote call to EJBs.
    Please give detailed explanation.
    thank you,
    sudheer

    <i>Please suggest me which method (is Helper classes or Using EJBs) is perferable :
    1) to get better performance</i>
    EJB's have quite a lot of overhead associated with them to support transactions and remoteability. A non-EJB helper class will almost always outperform an EJB. Often considerably. If you plan on making your 70 helper classes EJB's you should expect to see a dramatic decrease in maximum throughput.
    <i>2) for less network traffic</i>
    There should be no difference. Both architectures will probably make the exact same JDBC calls from the RDBMS's perspective. And since the EJB's and JSP's are co-located there won't be any other additional overhead there either. (You are co-locating your JSP's and EJB's, aren't you?)
    <i>3) for better container resource utilization</i>
    Again, the EJB version will consume a lot more container resources.

  • Looking for a high-performance and reliable NAS

    Hi,
    I have been searching for a high-performance and reliable SOHO NAS storage but I have seen very mixed and contradicting reviews for the products I have looked at so far. From QNAP to Synology to etc.
    However I've not found a good review for Promise SOHO NAS devices such NSx700 and NSx600.
    Is anybody here using them? If so how would you rate these devices?
    Thanks in advance,
    Behrang

    My g/f is using a Synology 1511+ with 2TB WB black drives - set up for 2 disk redundancy.
    http://www.synology.com/us/products/DS1511+/index.php
    She has her lightroom images on there and it works very well with her MBP 10.6.8
    If you have specific questions, please ask
    Michael

  • Performance and Stability Problem with PE9

    I just upgraded my computer to a Core i5 with 8G of memory and everything is running much faster.  But my NEW PE9 just run very slow.  Some of the simple tasks take 10-30 second to complete.  Even Windows 7 will often come out to ask if I want to wait for PE9 to wake up or kill the process.  When I want to change the size of a video clip, it just doesn't work at all due to performance.  It will take PE9 20-30 seconds to resize the video clip.  Without some realtime feedback of the size, it is impossible to do the resizing and this is a very fundamental operation.  PE9 often crash or seize up as well, I didn't have any of these problem with PE3.0.  I upgraded to PE9 simply because my PE3.0 for WIndows XP is not comletely compatible with Windows 7 (some of the text displace does not show up).
    Do anyone else have issue with performance and stability?

    Some general comments, and reading (some for PPro, but concepts are the same)
    http://forums.adobe.com/thread/416679
    Some specific information that is needed...
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    My 3 hard drives are configured as... (WD = Western Digital)
    1 - 320G WD Win7 64bit Pro and all programs
    2 - 320G WD Win7 swap file and video projects
    3 - 1T WD all video files... read and write
    Make sure you have the default Windows hard drive indexing set to OFF for all hard drives and folders
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
    And, finally, the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    This is aimed at Premiere Pro, but may help
    Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
    Also, tuning Win7
    http://www.pcworld.com/businesscenter/article/220753/windows_7_godmode_tips_tricks_tweaks. html
    Temp/Cookie Cleaner http://www.mixesoft.com/
    http://forums.adobe.com/thread/789809?tstart=0
    Win7 Toolbar http://WindowsSecrets.com/comp/110210
    More Win7 Tips http://windowssecrets.com/comp/110127
    Utilities http://windowssecrets.com/comp/110106 (Startup Solutions)
    Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
    Win7 Configuration Article http://windowssecrets.com:80/comp/100218
    Win7 Monitor http://windowssecrets.com:80/comp/100304
    Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
    Win7 Virtual XP http://www.microsoft.com/windows/virtual-pc/
    More on Virtual XP http://blogs.zdnet.com/microsoft/?p=5607&tag=col1;post-5607
    Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
    Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346?tstart=0
    An Adobe Win7 FAQ http://forums.adobe.com/thread/511916?tstart=0
    More Win7 Tips/FAQ http://forums.adobe.com/thread/513640?tstart=0
    Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
    Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
    Win7 God Mode http://forums.adobe.com/thread/595255?tstart=0
    CS5 Install Error http://forums.adobe.com/thread/629281?tstart=0
    CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
    Win7 and Firewire http://forums.adobe.com/thread/521842?tstart=0
    http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
    http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
    Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435?tstart=0
    http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html
    Harm's Tools http://forums.adobe.com/thread/504907
    Also http://www.tune-up.com/products/tuneup-utilities/
    Also http://personal.inet.fi/business/toniarts/ecleane.htm

  • BEA / Wily:  Financial Webinar - Achieving Availability, Performance and Control of Java Applications in Financial Services

    Event Date: October 1, 2002 at 11:00 AM Pacific (US), 02:00 PM Eastern (US)
    To register: http://regsvc.placeware.com/?wily-bea1001
    Title: Achieving Availability, Performance and Control of Java Applications
    in Financial Services
    Abstract:
    In today's competitive environment, financial institutions must focus on
    three key business goals:
    a.. Creating a customer-centric enterprise to maximize value to customers
    and increase share of wallet
    b.. Improving transactional efficiency for rapid delivery of the right
    products, services and information to customers and to employees
    c.. Accelerating the decision making process to mitigate risk and improve
    returns.
    BEA and Wily Technology have helped a number of financial services firms
    meet these objectives by delivering high-performance business solutions that
    meet rigorous demands for performance, reliability and scalability.
    On October 1, 2002, Wily Technology and BEA will present a joint Web seminar
    titled "Achieving Availability, Performance and Control of Java Applications
    in Financial Services" with Eric Gudgion, Principal System Architect,
    Technical Solutions Group at BEA and Chris Farrell, Director of Technical
    Marketing at Wily. This Webinar will showcase the many advantages that the
    WebLogic® Enterprise PlatformT and Wily's Introscope® offer financial
    services firms.
    Attendees will learn how WebLogic Server, BEA's unified, simplified and
    extensible solution, provides a robust platform for the development and
    deployment of enterprise Java applications. Some examples of what financial
    institutions can achieve with BEA include Multi-channel Services Delivery,
    Straight-Through Processing, Wealth Management and Cash Management.
    Wily Technology will highlight Introscope's ability to manage financial
    services Java applications by pinpointing component-level performance issues
    in real-time, whether in the application, application server or
    Java-connected back-end systems. Wily's suite of Java application management
    solutions offers a comprehensive platform for achieving 24x7 application
    availability, enhanced performance and better control of IT resources.

    First of all you should check out which products are supported on 64bit :- http://www.oracle.com/technology/products/bi/hyperion-supported-platforms.html
    If you are planning on using windows 64bit EAS then you will have to manually deploy the web application, it cannot be automatically deployed.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Disappointed in CS6 and Adobe in general

    I am more and more disappointed in CS6 and Adobe in general.  I no longer have any respect for Adobe or their products.
    I can't read the new title editing function in Premiere CS6 (it was fine in CS5). Somebody here said you can make it bigger: No you can't. You can make the box bigger like a picture frame around the edit, but the text is still unchanged and unreadable. Soundbooth was usable as a wave editor, Audition is not. Installed on an AMD machine, Premiere Pro CS6 imports Nikon video as audio and after more than a month of playing with it Adobe's India supper support still doesn't have a clue.
    Dreamweaver CS5 Ste files won't fully import into CS3 or CS5 (it can't read the FTP user/pass), my install of Encore CS6 is missing all the menu templates and buttons so I go back to CS5, and I was totally disappointed that CS6 won't edit in 3D. The After Effects work around for 3D is a joke.
    The Master Collection download install file is just a little too large to fit a backup on any DVD. How inconvenient! The first one kept asking for "Disk 2 - English/Japan". It would be nice if they got it right before releasing it to the public.
    Finally frustrated with the idiocy of Adobe, I bought Grass Valley Edius 6.5. When I called GV for a minor issue I got an office in the USA on the second ring and a quick, correct answer. Everybody there speaks clear English. The Edius product simply works (it's been a broadcast news editoring standard for years) and I can also edit 3D.  I can actually see titles when I'm editing them. It imports any file I want correctly, including the Nikon files that Premiere CS6 can't. It has all the functions that Premiere does, including good stabilization, and a few that Premiere does not.
    And Grass Valley Edius is a product from Japan!
    Wake up Adobe, your ship is sinking fast into the Indian Sea and I'm sailing in the other direction.

    I had another adventure today. Learning from this forum that the menus and buttons missing from Encore CS6 were in a "missing items" update, I downloaded and installed the update only to find there were still no backgrounds, no buttons and only a few "menus". So I contacted Adobe Chat Support. I was put in contact with Rahul.
    I filled in form indicating that the missing files update did not contain very many missing files.
    Rahul asked what the error message was.
    I said there was no error, that Encore CS6 after installing the update still contained no backgrounds or buttons.
    Rahul asked for the serial number. I provided it.
    Then Rahul asked what the error message was.
    Rahul is not paying attention.
    3 cents per hour would be overpayed for Rahul.
    Rahul is not unlike all the others I've encounter with Adobe's outsourced support. They don't pay attention. They simply don't understand plain English. They are robots.
    Adobe is not saving anything by hiring people who act like robots and accomplish nothing. They are only alienating customers. (Double meaning on the word "alienating")
    Two other "Rahuls" wasted hours doing the same things over and over by remote into my computer trying to figure out the AVI files that came up as audio only, and they solved nothing.

  • Is there a way to view Flash videos on my iMac without downloading Adobe Flash Player? I'm concerned about performance and security with Flash Player.

    Is there a way to view Flash videos on my iMac without downloading Adobe Flash Player? I'm concerned about performance and security with Adobe Flash Player.

    If the video is only available in a format that requires Flash player : then no.
    However, a great many can also be viewed in an HTML5 version, in which case http://hoyois.github.io/safariextensions/clicktoplugin/ or similar can be set up so that Flash never runs unless you specifically choose it to.

Maybe you are looking for