LR 6 stalls on local folder import. Not all my pics get imported.

LR 6 stalls on Import. I'm only importing from a local folder and it keeps stalling and not importing all my pics. Those pics were exported from Apple Photos to a local folder which I'm trying to
to add to LR 6. Nothing is connected to my computer. I've tried many times over to remove the folder in LR and add it again but it behaves the same.
Any pointers? Many thanks!

Actually I have more info now. Poked around on LR as well. I DO see the pixel in LR. BUT, it's only for a split second...after in fully renders, it's gone.
Maybe the preview of each pick has the pixel, but full res Master does not? Isn't there a difference b/w what "preview" you see in Aperture and LR?
Regardless, it must be a hot-pixel in the camera. I have done more importing and it appears to be on a small set of pics from 2-3 years ago. Not on my most recent pics...yet.

Similar Messages

  • IPhoto to Aperture 3 import - not all photos get imported...

    Hello - My library is not huge, only about 8000 photos. Just bought Aperture 3 and imported my iPhoto library into A3. Seemed to go without issues. Today, as I re-organize a few folders, projects, etc., I realize that not all the photos were imported. About 700, to be exact. Every named Event in iPhoto imported over into A3, but not all photos within each Event (now Project). Any thoughts on what could have happened and how this could be avoided?
    I could import each Event individually, but then I would loose all my keywords. Any work around you can think of? Thanks!

    Try rebuild your iPhoto Library:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    I would import each event individually, but I would like my keywords preserved
    Using the iPhoto Media Browser (File -> Import -> Show iPhoto Browser) will get your keywords too.
    Regards
    TD
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

  • I updated my iphone and lost all my notes there is lots of important notes, how can i get em back especially that on itunes when i sync my iphone a note appear that there is no back up on icloud,and i cannot restore?

    i updated my iphone and lost all my notes there is lots of important notes, how can i get em back especially that on itunes when i sync my iphone a note appear that there is no back up on icloud,and i cannot restore?

    Without a backup on iCloud, there needs to be another device using the same @icloud address that is syncing to the notes.  Without that, there is no way to go back in time to create a backup before performing a major update.

  • HT1386 I have double and triples of photo's on my iPad. Not all my pics but most of them. I was told that I screwed up in synching with iTunes when I initally set up. How in the **** do I get rid of all the dups? I cannot delete them from my iPad. HELP ME

    I have double and triples of photo's on my iPad. Not all my pics but most of them. I was told that I screwed up in synching with iTunes when I initally set up. How in the **** do I get rid of all the dups? I cannot delete them from my iPad. HELP ME!

    If the shows are in fact still on the pad, they will be found in the videos app, not the music or I tunes app.  Look there and see if they are still there.
    If you don't see them there, go to the searchlight screen ( farthest left home page) and type in the name of one of the shows.  If it is on the pad, hiding somewhere, this will find it.
    If they are not there, they should not be using up space.
    To get them back onto your pad, plug in and sync again.  Make sure you transfer purchases first.   Before you sync, take a look at the video tab in your I tunes, and check what you want and don't want synced.

  • Import not all records

    Hi, all!
    We use BPC MS 7.5 sp 06.
    We try import txt file. But not all records loaded.
    We checked tmp file that generated during Import and saw that all files that we try to import exceeds max 1,265 KB, and last record in this file not the same as in source file.
    And at all not all records imported in application and there isn't errors during Import.
    Does anybode know how to change this limit?
    Best regards,
    Iaroslav

    Hi,
    Once again, the number of records might not be similar in BPC and file. The reason behind this is the records might get aggregated while importing. Hence, you should consider this while comparing the data.
    Let me give an example to explain this scenario.
    Lets say below are the records in your file:
    ACCOUNT    ENTITY    CATEGORY    VENDOR    AMOUNT
    ACC1       ABC       ACTUAL      1234      1000
    ACC1       ABC       ACTUAL      5678      2000
    One you import the data, if your application doesnt have VENDOR dimension, then the 2 records will get aggregated and will be displayed as:
    ACCOUNT    ENTITY    CATEGORY    AMOUNT
    ACC1       ABC       ACTUAL       3000
    So, you see, the source file has 2 records. However, the application has only 1 record. So, the record count doesnt match. You wont even get any rejected count, because both the records from the file have been imported successfully. Its just that the records have been aggregated.
    Please note that the above example is just to show you how the records will get aggregated.
    Hope this helps.

  • UST12: not all entries moved during import

    Hi there,
    Today I faced the issue below.
    When comparing a single role from Dev with QAS system via SUIM it showed that role in QAS does not contain some auth objects whereas they existed in PFCG/AGR_1251 (after transport was imported into QA). As far as I know SUIM uses UST* tables for reporting. I checked UST12 table (the only UST* table the transport consisted of) and found that indeed some objects were missing for certain profiles.
    transport logs for Import phase into QA showed entries like that:
    3 entries for UST12 imported (100V_VBAK_AATT-ED78820508A*).#
    0 d /   0 i /   0 u /   4 = 100% ucf UST12 #
    4 entries for UST12 imported (100V_VBAK_VKOT-ED78820508A*).#
    3 entries from UST12 (100V_VBRK_FKAT-ED78820500A%) deleted.#
    0 entries from UST12 (100V_VBRK_FKAT-ED78820500A%) deleted.#
    0 d /   0 i /   0 u /   3 = 100% ucf UST12 #
    3 entries for UST12 imported (100V_VBRK_FKAT-ED78820512A*).#
    3 entries from UST12 (100V_VBRK_VKOT-ED78820500A%) deleted.#
    0 entries from UST12 (100V_VBRK_VKOT-ED78820500A%) deleted.#
    0 d /   0 i /   0 u /   3 = 100% ucf UST12 #
    3 entries for UST12 imported (100V_VBUK_FRET-ED78820510A*).#
    8 entries from UST12 (100ZERU_BUKRST-ED78820500A%) deleted.#
    0 entries from UST12 (100ZERU_BUKRST-ED78820500A%) deleted.#
    Newer transport that changed other objects of this role did not contain "deleted" entries in transport log for UST12 table, only "imported' ones. After moving this to QA, UST12 was "synced" with AGR* and SUIM comparison report works as expected.
    What is a reason for TMS to not import all entries for UST12 but to delete some?
    I tend to think this could happen again and confuse those people using SUIM for security changes controls in our organization.
    I checked recent notes regarding SUIM reports but it looks like they have been implemented already.
    Thanks in advance,
    Igor

    >
    Igor Kustov wrote:
    > {quote
    > > Hi,
    > > possibly changes have been performed to the role in DEV after it had been inserted into the transport. In contrast to normal transports role transports behave a bit different at the moment. Only after you have finished your changes and generated the profile you should insert the role into a transport
    >
    > As far as I understand during transport release it takes current "snapshot" of the tables for Roles/profiles, so any changes made to the role after transport was created but until released   would be put into that request, right? This seems proved to be true as PFCG/AGR_1251 contained correct values in QAS. So, the problem is that during release of transport not all needed tables related to user/role management are "pictured" and put into the request i.e. some tables (UST*) are "pictured" only when role is being put into request, correct?.
    This is a common rumor......
    Please read: https://service.sap.com/sap/support/notes/571276
    Ther exists already 1 discussion about this fact in this forum....
    >
    >
    > > As per your description it would have been sufficient, to generate the profile in QAS to have the current profile again. At generation the AGR_data is put into the USR/UST*-tables.
    >
    > Well, when changes to the role are moved new profile is generated automatically in the target system, therefore values from AGR* should populate UST* tables? Or I am missing something..
    Well only, if you use the procedure mentioned above.
    US*-table content is only created when generating the profile. So if you have more data in AGr-tables, the profiles are not actual.
    b.rgds, Bernhard

  • Not all RAW images are imported

    I have CS5 and use a Lumix FZ150.  The native format of the RAW images on the camera is RW2.  When I try to open these in CS5, some are opened some do not.  The pics that open, open in Camera RAW.  The others give me an error message, that my camera is not supported?
    Any ideas as to what the problem is.

    The FZ150 RW2 files should open in ACR 6.5 thru ACR 6.7 for CS5.   If you are not use ACR 6.7 you might try that, first, in case there was some issue that was corrected in later versions.  
    If you are already using that version, then the files may be corrupt.  It could be a bad memory card, bad card reader/cable or even a bad hard-drive on the computer.  You might try transferring the bad files, again, from the memory card, perhaps using a different method (camera-connected-cable vs card-reader) and see if they work a second time.  If not, then the memory card may be bad.  If the files transfer ok a second time, then something besides the memory card is bad.
    If nothing you do works, then perhaps the camera is writing the files in a different mode that Adobe doesn’t support.  I am not familiar with your camera to know what that might be, but some cameras write smaller raw formats or HDR raw formats and maybe Adobe doesn’t decode everything.
    If you can’t figure it out, then you can try posting a bad file, here, so others can take a look.  The way to do that would be to upload the raw file (or preferably a ZIP of the raw file) to a large-file hosting service like www.dropbox.com or www.skydrive.com or www.wetransfer.com or www.yousendit.com and then post the public download link in a reply, here.

  • Not all Pictures are getting sync

    I have the New iPad and Windows 7 with the latest version of iTunes. I have a folders with many pictures in them. I am trying to sync these pictures to the iPAd. I select the folders I want and the picture start to sync but not all the picture copy over to the ipad I have cleared the itune photo cash folder. Please help I bought this so I could copy my pictures to it and it is not working right. Please help.

    It is possible that you clicked "Block Images" in the right-click context menu while saving an image.
    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    You can use these steps to check if images are blocked:
    * Open the web page that has the images missing in a browser tab.
    * Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    * Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    * Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    * Select the first image link and scroll down through the list with the Down arrow key.
    * If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

  • HT201317 Not all my pictures get uploaded to iCloud

    I took several pictures with my iPod, but when I went to look at them on my computer not all of them were in my iCloud Photo Stream folder.  The missing pictures are in the Camera Roll and Photo Stream folders on my iPod but not all of them make it through iCould onto my computer.

    The fastest is connect with the dock cable to your Mac.

  • Copy database file local folder is not working in 11g

    Hi,
    i am working on oracle forms 11g.
    the follwoing code is not working. could any one guide me to reslove the problem.
    declare
         lv_file_name varchar2(100);
         lv_command varchar2(200);
    begin
         lv_file_name := substr(:parameter.image_path,instr(:parameter.image_path,'\',-1)+1);
         lv_command := 'cmd /c copy_file '||:parameter.image_path ||' s:\temp\deposit\scanned_image\'||lv_file_name;
         client_host(lv_command);
         if form_success then
              message('saved..');
         else
    message('file copy process failed..');
         end if;
    end;

    Also, copy to the s: drive might not work. In your copy_file script you need to define the s: drive first
    net use s: \\some_shareor use UNC notation
    lv_command := 'cmd /c copy_file '||:parameter.image_path ||' \\some_share:\temp\deposit\scanned_image\'||lv_file_name;Oh, and use full path to copy_file:
    lv_command := 'cmd /c c:\some_directory\copy_file.bat '|| etc.;Edited by: InoL on Mar 11, 2013 9:20 AM

  • HT1473 Import not using preferred location for import

    I have CD. I want CD imported into iTunes. I do not want CD imported into iTunes on my hard drive. I want it imported to an external drive. I have changed the path in preferences and yet it continues to import to my hard drive. How do I stop that?

    /Users doesn't have to be for local users. If you share it out on the network, and enable it "for user home directories," then you have a network share point. Pretty simple.
    Best practices vary here. You can have user home directories on the /Users map point of your OD server if you're a really small shop, but mid-large shops will have a separate server runnign AFP for sharing home directories, just because more servers = more bandwidth and less CPU load. I'd say for < 25 users, putting the OD master and AFP home share point is fine. Especially if you're using portable homes, as that reduces used bandwidth significantly.

  • Artist/album names missing when adding folder (but not all of them)

    Yesterday I found iTunes couldn't locate the folder where I store MP3 downloads - ie. I got the dreaded '!' alongside most tracks. When I used the Add Folder command I ended up getting a duplicate of virtually every track.
    However most of the duplicate tracks were only shown with the track number on the original album plus about 12-15 characters from the title (ie. character string used as a label for the MP3 file). There was no detail of the artist or album.
    Given the large number of duplicates involved I decided to clear out the library and have just used Add Folder. Same outcome - 1/3rd of the tracks described in full; the other 2/3rds just show track number and some of the title.
    Suggestions on (a) where I'm going wrong; and (b) whether I can use contents in the Previous iTunes library folder to recreate the library would be greatly appreciated. Many thanks.

    As I've already said this question has been answered maybe no one is monitoring this topic but ... I've just worked out the reason the detail is missing is because the tracks which have limited detail are in WAV format.
    This is where I am completely lost because they have all been downloaded from the iTunes store or from Amazon as MP3 files, and I'm not aware either of the download functions comes with an add-on called "automatically convert to WAV".
    The irony is that this is quite convenient but if anyone can provide an explanation of how it is occurring then I would be interested to hear because I can't figure it out. May still trust my sanity, but not my memory!

  • Not all of my movies import to iPhoto.

    Are you able to tell me which format is accepted please, and how do I convert it so I can bring them in?
    Sometimes if I do it one at a time it works but I have many to import.
    Thanks for your help.

    There are many, many codecs used to create movies and it is impossible to list all the ones that are not supported.
    AVCHD is definitely not.
    avi often is, and installing Perian will add support for more.
    But it's easier of you tell us what formats you're shooting...

  • Not all my PowerPoint slides import into Captivate 3

    I am trying to import a 62-slide presentation in PowerPoint 2003 to Captivate 3, but only 10 slides will import. I am not sure what is causing the other 52 slides to not be recognized. Any suggestions?
    Thanks!
    Jennifer

    Jennifer,
    Does it always stop on Slide 11?  The reason I am asking is that if this the case then look on that particular slide to see what is different from the rest.
    Another suggestions, select all slides, then deselect slide 11 (assuming above applies) and try it, hopefully it will bring all 61 in then.  If not pick a bunch at a time and see where it fails - you are looking for a pattern of failures to pick the offending element.
    Tim

  • Import not responding after completing the import process

    Hi All,
    This is the problem i am facing:
    1. Imp utility is not terminated after the import process is done. Had to manually terminate the process with ctrl+c or ctrl+break.
    2. Log Files are not generated properly. Log file are created and updated partially.
    3. Although database is effected with all the changes there in the dump file, it is not being shown on the screen (and hence log is not appended).
    4. When using SHOW=Y parameter, Imp process is terminated successfully with success/warning/error messages and log files are generated properly.
    I have checked in the database: although the results are not shown on the screen ( or log not getting generated), the db is effected with all changes in the dump file up to last line.
    5. Commands I have fired:
    imp [email protected] file='Y:\IDW Analysis for Initial Load\IDW Data\isdshrd_temp\GROUP_DIM.dmp' log=c:\ImpLogs\ACCESS_GROUP_DIM.log fromuser=GEAM_DIM touser=kanchk
    imp [email protected] file='Y:\IDW Analysis for Initial Load\IDW Data\ACCOUNTING_BASIS_DIM.dmp' log=c:\ImpLogs\ACCOUNTING_BASIS_DIM.log fromuser=GEAM_DIM touser=kanchk show=y
    Please respond asap
    Thanks,
    Kishore

    As an experiment, can you try to import the same on the database server itself. This will help us to understand is it network issue or something else.
    Wait Event Description
    http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96536/apa5.htm#970961

Maybe you are looking for