LR and PS housed on D drive

Can I move LR and PS to my D:drive where there is plenty of space as apposed to my C:drive? And how?

I am not answering about PS, as I don't know. for sure, but I doubt that PS cares what drive your photos are located on.
You can move your photos that have been imported into Lightroom to any drive via this procedure: Adobe Lightroom - Find moved or missing files and folders
If that doesn't free up enough space, then you can also move your Lightroom catalog file (and associated previews) to any other drive simply by moving them using your operating system, then double-clicking on your catalog file. However please be aware that your catalog will likely run slower on an external drive; the usual advice is to put your catalog file on your fastest drive (which is usually your C: drive)

Similar Messages

WRTSL54GS and VISTA - can't map drive

Hi,
I installed a WRTSL54GS router yesterday and the attached drive (currently just a 1GB flash drive) does not show up under VISTA OS. It only shows as a Media Device on the network. It seems to work OK under XP-home. Is this a VISTA compatability problem or is there a trick to it? Otherwise it seems to work fine.
Thanks

edmed26 wrote:
Hi,
I installed a WRTSL54GS router yesterday and the attached drive (currently just a 1GB flash drive) does not show up under VISTA OS. It only shows as a Media Device on the network. It seems to work OK under XP-home. Is this a VISTA compatability problem or is there a trick to it? Otherwise it seems to work fine.
Thanks
I am having the same issue... I can manage the WRTSL54GS from the Vista pc just fine. There is a usb sata port/bay and a 7 port USB hub attached to the device. The sata port has a 320gb ntfs drive and the hub has 3 different format and size drives attached.
Claimed Disk1 : USB NAND FLASH DISK
Partition File System Total Space Free Space Shares
UTILITES FAT 0.016 GB 0.002 GB
Unallocated 0.0 GB
Total 0.016 GB 0.002 GB
Claimed Disk2 : Generic USB Flash Drive
Partition File System Total Space Free Space Shares
HES UTILS FAT 0.513 GB 0.069 GB
Unallocated 0.0 GB
Total 0.514 GB 0.069 GB
Claimed Disk3 : CBM2080 Flash Disk
Partition File System Total Space Free Space Shares
HES UTIL 2G FAT 2.10 GB 0.834 GB
Unallocated 0.0 GB
Total 2.10 GB 0.834 GB
Claimed Disk4 : WDC WD32 00AVJS-63WDA0
Partition File System Total Space Free Space Shares
NTFS_1 NTFS 320.1 GB 320.1 GB
Unallocated 0.003 GB
Total 320.1 GB 320.1 GB
they are setup as 1 share on the router...
on my XP Pro SP3 pc i have the drives mapped as network drive....    All_Partitions on 'Wrtsl54gs'(R
and i see the separate drives as folders on this drive...
Vista lists the drives as a media drive and a network drive [under network con...]
... but when i try to authenticate to the drive when mapping [using any and all accounts set in the router] i keep getting bounced back to the login prompt.... i have even tried using the Wrtsl54gs as the domain\user structure... still no joy...
the vista media server listing shows 3 short video clip files... but i am not sure they are actualy on any of these drives [possibly 'sample' clips from somewhere...]
this is very frustrating as i was planning on using this router/server to house shared videos and install files....
i have plugged each of the flash drives into the vista's usb port and it reads all of them... fat, fat32 and ntfs...
RDH xxx

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

Welcome to the Apple Community.
It's do-able, but I don't think it's a great idea.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

IPhone 5 iOS 6.1.4 and Windows 7 x64 USB Driver Issues

Been pulling my hair out with this one for the last week or so and haven't had any luck finding anything on the forums or the web regarding a solution short of a full reinstall of Windows 7 which I am not prepared to do at this time; so hoping someone here can shine some light on this for me
I have a iPhone 5 that is updated to iOS 6.1.4 and a recently built Windows 7 64-bit machine. All of my other USB devices function fine (keyboard, mouse, Xbox 360 wireless receiver for Windows, and a Seagate 2TB external USB drive). I've downloaded the most recent version of iTunes, installed successfully and then attempt to plug in my phone to sync. I get the standard Windows *ding* that I've attached a device and 1 of 2 things happens (I haven't been able to determine what causes one reaction to happen versus the other): Windows will successfully install the 'Apple USB Mobile Device Driver' successfully and it will appear under my USB devices in Device Manager. However - iTunes will not recognize the phone and I cannot see it in Windows either. In the 'Devices and Printers' snap-in my iPhone will appear under 'Unspecified Devices' as the 'Apple USB Mobile Device'. The iTunes diagnostics fail to find a connected device so the tests fail. As soon as I unplug the device, the strangest thing happens: Windows will start trying to install a device driver and after a few seconds it will fail stating that the "MTP Device Driver" installation failed because the device was unplugged. iTunes also thrown an error "iTunes cannot connect to this iPhone" throwing error code 0XE8000065 (I've also seen error code 0XE8000085 as well)
After some finagling, I've managed to get Windows to recognize the device under 'Portable Devices' in Device Manager as an "MTP USB Device" using the generic driver. At this point, I've tried updating the driver and manually specifying the Apple USB driver located in the C:\Program Files(x86)\Common Files\Apple\Mobile Device Drivers which updates successfully but then changes the device to "Apple USB Mobile Device" and moves it under the USB Devices in Device Manager; and Windows nor iTunes can see it even still.
I've tried removing iTunes several times and ensuring that all remnants of the installation are gone (registry and folders on the installation drive) and have disconnected all my USB devices short of the keyboard and mouse and still I get the same results. At this point, I'm afraid that a re-install of Windows is going to be the solution; but it's a drastic one (I have a SSD drive where Windows is installed along with all of my games for faster load times/better performance and do not want to have to redownload\reinstall all of them) and I'm not prepared to undertake it at this time, which is why I'm posting here
I've used a utility called USBDeview that sees my phone is connected - so I know from a functional standpoint that my USB ports are good and working. I also know the cable is good too - my daughter's PC (Windows 7 32-bit with NO iTunes) immediately sees the device when I plug it in, installs the drivers, recognizes it as an iPhone and I can then see/browse it in Windows Explorer like I would normally expect. My work PC (Windows 7 64bit, NO iTunes) sees the device just fine as well. I would immensely appreciate anyone that has seen this issue or has any additional solutions I can try.
It's also worth mentioning that I've never used Kapersky antivirus so the UPPERFILTERS value in the registry that I've seen as a solution on some forums is not present on my machine. I'm using Microsoft Security Essentials as my antivirus (no flaming please lol - it meets my needs and is extremely lightweight, which is why I'm using it on a gaming rig) and it's not indicating any issues. I've also tried running iTunes as an administrator (even though my account is a local admin on the machine) and that does not have any effect either.
If there is anything I left out, please let me know; and I thank you in advance!

AphexTwin wrote:
- no Apple input?
Of course not. Didn't you bother to read the TOU of this forum? This is a USER TO USER technical support forum. Apple doesn't post here.

I have lost my imac bootable disks and have erased my hard drive.

I wanted to format my hard drive and put a clean install of Tiger on my iMac so that I could sell it, so I went in to disc utility and erased my hard drive. What I thought were my bootable discs were for my macbook pro with Snow Leopard on, and they wont work on my iMac. I have since gone in to disc utilities from the bootable discs (just after it tells me these discs wont work) and have replaced my hard drive with the DVD (thinking I would be able to boot to that point and mount an image from another DVD to run tiger from there) and now I am totally lost! I know I shouldnt meddle with things I dont know, but I've never managed to break a windows PC by doing this!
Could someone help please as I have no idea what I can do now!
Super thanks
Helen

Replacement disks run about 16.00 per disk. You can buy Mac OS X Tiger from Amazon for anywhere from 79.00-200.00.
If you buy a full retail copy of an OS like Snow Leopard you can install that on any compatible computer. The license for a standard retail copy of the Mac OS entitles you to install it on 1 system. However the retail copy of the Mac OS does not include the iLife Applications which come with the original install disks that came with your computer.
The individual install disks that come with each computer are made just for that computer and include drivers required for that system. As a former Dell owner I can tell you that Dell also uses specialized install disks for the OS. They don't hand you a copy of windows, rather a set of disks that are specific to that model of computer.
Cheers!

Upgrade BIOS and drivers have possibly corrupted drive. OS will not boot.

Model: Toshiba P505-8980
Part Number: P6PG0U-005002
OS: Windows 7 Professional 64-bit (upgraded from Home Premium)
6 gig RAM, 500gig HD
Actions:
I haven't started up my computer in a while. First I installed the critical and optional updates (3 total) from windows update, rebooted, and Toshiba Service Center popped up and said that there was the BIOS 3.10 update and the HDD/SSD Alert update. Through the Service Center I downloaded and installed the BIOS update, at the end it seemed as if there was an error. I rebooted the computer and everything seemed ok, so I downloaded the HDD/SSD update through the Service Center. Upon rebooting the drive would not boot. (Screen remained blank with a blinking cursor and HDD light was not on.) There are no accessories/USB devices/drives attached. After a reboot I checked the BIOS and it recognizes the Hard drive, I restored all settings in BIOS to default and rebooted. The computer started receiving stop errors (blue screen) and stuck in a reboot loop. I entered the BIOS, restored default settings again and rebooted, I could get to safe mode and it would receive stop errors trying to load disk.sys file. I also tried last known good configuration and that wouldn't work either. After a while the laptop was able for me to select to try and repair the disk using the repair utility. It reported that there may be partition errors (on the last step of recovery) and I selected to repartition the drive to factory default with the Toshiba repair tools. It got to about 98-99% and received errors at the end. I tried using a Windows disk to reinstall the OS, but it reported it couldn't install on any of the drive partitions because of an error in the boot configurations. After trying to repair again it doesn't report any disks or partitions. Currently after booting it reports now that there is an error that occurred while attempting to read boot configuration. File: \Boot\BCD|Status: 0xc000000f. Guessing that the boot sector got corrupted. After reading that BIOS isn't recommended to be installed while in windows, I'm wondering if using the service center messed something up.
Question 1: Any recommended actions to take now? No recovery disk available
Question 2: Is there a way to configure the service center to download a BIOS update and be able to save it instead of only being able to install it within windows and the service center?
Thanks in Advance!

I was able to get into system recovery. This system recovery was different then the first one I came across. Underneath the Command Prompt option there was a selection for a Toshiba based restore. That is the one I tried that failed at 98-99% This system recovery just has the standard options. At first it showed me the original OS of Home Premium (recovered). I tried to repair the Home Premium and it still wouldn't work. "Startup could not repair the problem". On the many tries the probelms were either "Failed Installation" or "Partition Table". Then when I tried loading the OS it would blue screen and reboot repeatedly. So I loaded up Windows 7 Professional from a different CD to at least get the OS working. I tried Repairing but that didn't work with the same errors, and it also reported that there was no system image on the disk. I did a Custom (fresh) install and had all items copied to Windows.Old folder. So now I have an OS, BUT I can't activate it now even with the keys that I have from the old version because it said the key was only used for upgrade, not clean installs. So now I'm left with trying to find a way to get the original Home Premium image so I can load that and then upgrade since I have the keys I need. I tried doing repairs again, this time it showed me two Windows 7 Professional and one Windows 7 Home Premium. Again I tried repairing the Home Premium but it came back with the same errors. Now all that remains is just the fresh install of Windows 7 Professional that I installed but can't activate with the key. Anyway I can get/download a factory image from Toshiba? I only just bought the laptop shortly before Christmas.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

Backing up images on external hard drive and restoring to new internal driv

I recently purchased a new external hard drive and a new internal hard drive. Before installing the new internal drive, I backed up the old internal drive on the external drive. Then I installed the new internal drive to my Macbook Pro. However, when I tried to access and print my Aperture images on the new internal drive, I received an error message saying "versions with unavailable master images cannot be printed." I clicked on 'show referenced files," but couldn't determine how to recover my master images. I checked the forum and under "referenced files go offline after restore from a backup" it said to go to "File>manage referenced files" but nothing else. How can I recover my master images? Please help - I have nearly 6000 images that are lost without recovering the master images. And no, I was ultra stupid in not placing everything in a vault = but I'm relatively new to Mac OS and thought a backup would be sufficient. Thank!

The volume name of the new hard drive needs to be the same as the old hard drive - rename it if you have to - then they should be fine.
If you cannot seem to make this work then you will have to reconnect them with locate referenced files under the file menu. Select all the files that are disconnected before going into the dialog.
RB

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

I backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

i backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

Don't you just love changes in interfaces?
I found the answer to my question.
When you attach a device (iPhone, iPad) to your Mac, in iTunes 12 in appears as a tiny icon in the second "row" of the iTunes display. Click the icon and the familiar iTunes display for the device appears. From there, on the Summary screen, you can see the dates of the backups of the device (iCloud and backup to the computer). You can also use the button to backup to the computer.

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

How to install an SSD in a MacBook Pro and keep the original hard drive

Step by step instructions on how to install a Crucial SSD as the primary drive in a MacBook Pro and use the original hard drive as a second drive in place of the optical drive.
Apart from the time needed to back up your data and clone the original drive to the new SSD, you should be able complete this in less than an hour.

Verifying
Install the SSD in the HDD slot
Install the HDD in the optical slot
Boot to the HDD and format the SSD
Boot using Command R and restore the operating system from Time machine to the SSD
Reformat the HDD and restore the data files to it.

Hallo ,why is it that when I delete a photo ,which is backed up by time machine and western digital external hard drive , that I am able to restore the photo okay but not the titles and descriptions . I have a Macbook 4.1, mac osx 10.5.8 . Iphoto 7.1.5 ,

QUESTION.
Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
I am using a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading Iphoto ?
I hope that someone is able to help in this matter , as i have to restore 12000 photos !
Thanking you in anticipation.
Alan from Wigton

Hallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan

I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space. How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology?

I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space. How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology? It doesn't look like I created any more space by doing this, AND I totally lost all my iTunes playlists. I'm not sure if because I added old library materials manually if this messed up my playlists, or if the new location is just not reading my moved library. In any case, I followed step by step instructions and found a few holes and thought I'd just "figure it out" but I guess I'm not as smart as I thought since I'm still scratching my head many hours later.
Thanks for any support ;-)
Eaglerocker

Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder.
If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.

I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

http://support.apple.com/kb/HT1449

LR and PS housed on D drive

Similar Messages

Maybe you are looking for