LR CC 6 downloaded, installed, does not run. Have clicked on the .exe file, nothting happens.

I already have subscription, from CC app downloaded LR 6 2015 CC and installed. However, I cannot get it to run. The files Lightroom.exe size 16,167 kb date 4/15/2015 7:1pm is in the Program Files/Adobe/Lightroom folder, but nothing happens when I click on it. Running Win 8.1.
Have uninstalled LR5.71.

Hi All,
Please refer the steps given in the following help article.
CC applications close immediately after launch
Hope this helps.
Regards,
Sumit Singh

Similar Messages

Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
Thank You!
I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
Incidentally, whats up with all of the Java Console Add Ons?
I have:
Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
Also, .NET Framework 0.0.0 Should I uninstall it?

I downloaded Firefox 7 and when I click on the browser icon nothing happens, the browser does not load on desktop.I had no problems with Firefox 4 I had been using for several years and liked very much

I downloaded Firefox 7 and when I click on the browser icon nothing happens, the browser does not load on desktop.I had no problems with Firefox 4 I had been using for several years and liked very much

Most people have no problems with installing firefox as an upgrade, but there are quite a few things that can cause problems. Please have a look at the articles
* [[software Update Failed]] <-- clickable link (blue ) --
* [[firefox will not start]]
* [[firefox does not work]]
Post back after you read them and say what you tried. Have you ensured you used an admin account, possibly needing to check the UAC setting, and that security software is not blocking the changes. You should certainly try starting in firefox's [[safe mode]] either from a menu/icon option or by holding the shift key as you attempt to run firefox.
Is the browser icon you see on the desktop, and a firefox icon ?

Firefox does not start by clicking on the icon in RHEL 5.

Firefox does not start by clicking on the icon in RHEL 5 on thin clients, also the internet proxy server usename is not accepted for java applets on webpages. However while using Firefox on the servers directly everthing works fine. This issue occurs on a server thin client environment, where the home directories are located on a 5 TB storage connected using SAS cables to the servers.

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes. Then, the ipad will start up properly.

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

After Download CC does not run

Hey guys,
on my Mac Book Pro Retina with Mavericks I installed the Creative Cloud and downloaded some products.
Everything works fine,
but after downloading Dreamweaver I can not run this. I double click on the icon but nothing happens.
Any ideas?

See if this helps: http://forums.adobe.com/message/5796956#5796956

Background job in Released status and does not run. What is the problem?

Hi Experts,
I ran a ABAP report as a background job. But when I see the job status in SM37 I found that it is "Released" but the job does not run further, It remains in "Released" state. I have given the correct variant and start condition "immediate" . Moreover there is no spool and log as well.
The ABAP report runs fine in forground. It used to run in background few days back.
What could be the problem? Kindly help!
Thanks
Gopal

Hi Bob,
But I checked after 2 days still the job status is in Released state. There were some other jobs that ran successfully. So atleast after two days I hope the job should have run. I can't even delete it. What shall I do?
Thanks
Gopal

Hierarchy Viewer does not load after clicking on the + icon

Premise: I have a hierarchy viewer with multiple levels of master-detail with different VOs.
The inputs to the taskflow containing this page are the key and VO type. The tree should render until that VO which matches the type and key and all the next level children under it. The user can expand the nodes under these children at will to drill further.
Issue: I am able to render the tree with results. When I click on the + icon to drill on the children, I see that the backend code for fetching the children is called. But, the tree does not display. It shows the loading icon forever.
Example:
Organization - PO - POItem - Vendor - VendorSite -VendorAddress
                                                       - Responsible - ContactDetails
                    - Project - SubProject - Location
TaskFlow Input: Vendor, 12345
The tree should dispaly Organization - PO - POItem - Vendor(12345) - VendorSite(for 12345)
                                                                                                    -Responsible(for 12345)
If the user expands any of the VendorSites, the VendorAddresses should be shown
Technical Details: JDeveloper Version: 11.1.2.1.0
Code: To filter the children, I am overriding the CreateViewLinkAccessorRS in the VOImpls. I am passing bind variables to the VO criterion to check the paths.

@Arunkumar: Yes, I ran the AM tester and I am able to see the results properly for all the VOs and levels.
I created a sample on the HR Schema and tested. I see that when I click on the Employee node for expansion(can be checked with the data or the short description), it hangs with the load icon.
I do not see anything in the log other than:
<RegionRenderer> <encodeAll> The region component with id: r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
I do not see any upload options here to give my testcase. So, I uploaded to this link: https://www.dropbox.com/s/vybip3owzuziz86/HRHierarchyViewer.zip
Please let me know if I can do this elsewhere for easy access.
Message was edited by: Divya Bellamkonda

"List Folder" function does not work any more on compiled .exe files in LabVIEW 8.2

I used "List Folder" function in a splash screen VI to read the number of the subVIs within the .exe file. The number was used to create a progress bar. It worked with LabVIEW 8.00 but with 8.20 I get the error code 13 that means "LabVIEW: File is not a resource file."
I wonder is it a bug or a feature? Up to now I could not find any info about changing the .exe file format.
If it is a feature, is there a way to get the list or any other information to make a progress bar 0...100%?
With best regards,
Mikhail Nagoga

In LV 8.2, NI changed the exe format so that it no longer functions as an LLB. As far as I know, this is a feature and will not be changed back. I think it was changed to support some sort of security requirements in Windows Vista, but I don't remember where I got that notion from.
As a workaround, you can build the exe as a small exe with an LLB or maybe save the list of VIs elsewhere (for example, have all of them as subVIs of the splash screen).
Try to take over the world!

HT4623 My friend has an I phone & received word that she should install iOS6 onto her phone. When I try to do this, the line where it says download & install does not light up & therefore, I am unable to install. Why is this?

My friend has an I phone & received word that she should install iOS6. When I tried to do this, the line that says "download & install" isn't lit up & therefore, I am unable to do this. Any ideas? My phone was purchased about 3 weeks ago.

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

Downloading a Photoshop Elements Mac trial - download/install does not start

I am attempting to download Elements 10 trial on a Mac Book Pro. I have turned off my pop up blockers, firewalls, third party blockers, etc... I downloaded the assistant and once it installs nothing happens. It disappears out of the dock without downloading Elements. I tried to download AIR as well as it stated that it may need that downloaded before the assistant could work. Same thing happened.
Thank you,

Invalid Checksum error appears if the download got corrupt which could be due to a bad or slow internet connection.
You could try temporarily disabling Error Checking. See http://forums.adobe.com/message/4370247#4370247 to see out how.
If that does not resolve the issue, I woudl recommend using a different internet connection to download again..

I can't share my Final Cut X project : the process does not start. it seems that the project files is not found by the application. why ?

I crate a project on Final Cut pro X. A 52 mn movie, that works really good on the time line. But I can't export it on DVD or IPad or other devices. The process is engaed but without effective effect. After one hour no result. It seems that the "project" files is not physically recognise by Final Cut export routine. Is anybody had such a bad surprise ?

Tell everyone what type of video (format) you shot in the camera, what are your project settings and exactly what settings are you choosing when you use Share.

DATAEXPORT command does not give level0 data in the output file.

We are using essbase ver 9.3.1.3 Although explicitely programmed for the lev0 members in the output file, output data file has non-level0 members.
Please see the code....
=========================
SET DATAEXPORTOPTIONS
{     DataExportLevel "LEVEL0";
     DATAEXPORTCOLFORMAT ON;
     DATAEXPORTOVERWRITEFILE ON;
     DataExportRelationalFile ON;
/FIX (@RELATIVE("Distributable (Allocable) Income",0), @RELATIVE("Net Income Control",0),
     @RELATIVE("Balance Sheet Accounts",0),
     @RELATIVE("Qtr1",0), @RELATIVE("Qtr2",0), @RELATIVE("Qtr3",0), @RELATIVE("Qtr4",0),
     @RELATIVE("FY2010",0), @RELATIVE("FY2011",0),
     @RELATIVE("Organization",0))
     DATAEXPORT "File" "|" "filename.txt" ;
ENDFIX
=======================================
Can you please help?
Thanks,
Avi

on the members that are not level zero, look to see if they are the parents of a single child. If so, make the parents never share and it will solve your issue.

Install does not run on XP

Hello,
I just downloaded Oracle Database release 2 and I am having a very basic problem :) I can't launch the setup.exe in Disk1 - it fails as soon as I launch it?
I am running on Windows XP. I have tried this on 2 machines with similar configurations. The only thing I can think of (based on what I have seen in other posts) is that I have a Java version installed that interferes with the setup? I have JRE 1.4 installed?
Thanks for any help.
Mark

go to the disk1 folder you extracted it to and go to the win32 foler. Use this setup instead. I.E. K:\oracle dsk1\install\win32\setup.exe

I've downloaded firefox19. When I click on the exe. file I don't have a "run" option. What do I do?

Running Win 7 on ASUS K53E notebook with 2 GHz cpu and 4GB ram. I installed software for an older digital camera and started getting "Firefox is already running....." message. I did a soft boot with no change. I uninstallled and re-installed Firefox with no change. System restore failed twice. I've run AVG and found no threats. I'm currently using IE9 but some changes have been made in it too. Don't know what's happened but I want to get it straightened out.

Try to delete the profiles.ini file to force Firefox to create a new default profile.
*http://kb.mozillazine.org/profiles.ini_file
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

LR CC 6 downloaded, installed, does not run. Have clicked on the .exe file, nothting happens.

Similar Messages

Maybe you are looking for