LR - CC , sluggish ?

Hey Folks,
I've upgraded to CC and since doing so , notice my computer has become sluggish, youtube has stopped working. Internet seems slow, LR itself, espcially the Curves application is nighmare, hard to move the curve.
Its like LR is thinking / rendering ... Wonder if you have experienced the same, what the solution might be.
Appreciate your help.
Thanks
Gagan

Unless you are using 4K/5K monitors there may be limited (if any) benefits for enabling the GPU. See this document from a lead Adobe engineer for more info: GPU notes for Lightroom CC (2015) | Adobe Community

Similar Messages

  • Acrobat XI very sluggish on Yoga 3 Pro

    I have noticed that Adobe Acrobat XI is very sluggish on the Yoga 3 Pro. Specifically laggy when zooming in and out, panning, scrolling, and full screen. This is especially apparent with full screen and quite annoying in tablet mode. However, using the Microsoft Reader app with the same PDF files does NOT experience this lag.
    What I then discovered is that this has something to do with the Core M processor and it getting its power limited. If you change the power plan in OneKey Optimizer to High Performance (from Balanced, for example), Acrobat all of a sudden becomes quite snappy.
    When in tablet mode, if you simply want to read a PDF file (and use Acrobat), you do not need "high performance", so to extend the unfortunately bad battery life of the Yoga 3 Pro, you would want to put it in Balanced or Power Saver -- this should still be sufficient to read PDF files, but it is not the case with Acrobat XI unfortunately.
    I'm not sure which specific CPU limiting feature of the power plan is causing this issue in Acrobat, but I thought I would post this because I couldn't find anything on the internet on this issue.
    Solved!
    Go to Solution.

    Please do let us know how things work out for you and then, if you would, please mark the appropriate message as the solution. It may help other members in the future.
    Thanks!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Sluggish Performanc​e & Audio Problems in Lenovo T520

    I have experienced strange problems with my Lenovo T520 (specifications: i7, 6GB RAM, I can post detailed configuration). The problems are:
    The audio quality is noisy. What I find strange is the audio quality for the same song worsens when play in VLC media player (more noise) v/s when played in Windows Media Player
    The performance is sluggish and the system freezes when moved. What I mean is if I am watching a movie and lift the laptop from one place to another. The movie freezes while moving & audio stops. Once stable again the video and audio synch up again
    Trackpad unresponsive: The trackpad get unresponsive at times, but the Trackpoint is working fine.
    Could you post a solution to any of the problems?

    For the sluggishness....
    (1)  Make sure the power cord is plugged in.  I know...sounds dumb, but I had the same problem with my new T520 and I saw a thread on here stating that Lenovo thought it would be a great idea to make your new T-Series laptop run slow when on battery.
    (2)  Closely inspect the "Power Manager" profile you're using.  I noticed that even the "Maximum Performance" (or whatever it's called) profile was set to NOT best use the CPU.  In Power Manager, click "Advanced" at the top to go from "Basic mode" to "Advanced mode", then click the profile you want to use from the vertical list on the far left.  Then on the right side, expand the first drop-down category called "Performance" or something like that.  Now there will be two columns under that category...battery on the left and AC power on the right.  On the AC power column set the drop-down box to the "Maximum Turbo" setting.
    T520 / i7-2630QM / Optimus HD+ / Crucial M4 SSD

  • Ipad2 is sluggish after iOS 8 upgrade

    Since downloading ios8 my iPad2 has become very sluggish, cell service drops out and only a hard reboot will restore, some of my apps icons only show up as an icon framework, exchange based email seems to be getting erased and has to reload ( same on iPhone 5).  When the next patch coming out please, can't happen soon enough.  My iPad2 is almost unusable.

    This is just a user to user forum. We don't know when or if there will be an update (although an eventual update is pretty much inevitable)
    You can try a few things.
    Reset your iPad
    Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.
    Force close any extra apps.
    Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
    You can also look into restoring your iPad. Do a backup, restore it to factory defaults then restore your iPad from that backup. Might help.
    Beyond that you can send Apple feedback and let them know there are issues.
    http://www.apple.com/feedback/

  • Acrobat XI Very Sluggish After Update Ver. 11.0.09

    After ver. 11.0.09 updated my Acrobat Pro XI, the program operates very sluggishly.  In a multi-page PDF, there is a several seconds lag when scrolling through pages. And as one page changes to the next, there is always a "ghost" remnant of the page bottom before the next page appears. Also, when I have the thumbnails viewer open on the left and highlight a new page, there is a longish delay of several seconds before the full view of the page opens up. And sometimes when opening Acrobat XI, the entire viewing area is just white (although some of the menu bars is visible) for several seconds before the program interface fills out.  All in all, with the update to ver. 11.0.09, my Acrobat XI has become a lot slower and downright slow.  None of this existed before the update 11.0.09. (I actually uninstalled the Acrobat XI program and reinstalled to see if the program's function would improve, but no such luck.)  Is there any way to fix the slowness of the program or restore it to its efficient operation level before ver. 11.0.09?

    So, just for everyone's FYI:  if you weren't having problems with Acrobat Pro XI before the 11.0.09 update and you are now having issues because of 11.0.09, like I was with totally sluggish and non-responsive commands and performance, you might want to do what I did. I completely uninstalled Acrobat XI, ran the Adobe Acrobat clean up tool, then re-installed Acrobat XI and updated it manually starting with 11.0.01, then 11.0.02, then 11.0.03, skipped 11.0.04 (issues it created), skipped 11.0.05 (won't install without .04), then installed 11.0.06, 11.0.07, and 11.0.08. Did not bother with 11.0.09.  What is important to remember, I think, is that just because Adobe puts out an Update does not mean you need to install the Update, especially if you are not having any usage issues or performance problems.  So, I am back to Acrobat XI, ver. 11.0.08 and totally satisfied with the efficient and great performance that I am getting out of the program.

  • WORKAROUND! - Sluggish Motion V 4.0.1 on Mac Pro Nehalem 2.97 GHz 16 Vcore

    Hi guys, like several people on this forum and others I been very frustrated with the performance of both Motion.app version 3 and now Motion.app V4 .0 .1 (latest update) on my 2009 Mac pro Nehalem 2.97 GHz 16 Vcore 12GB with the ATI Radeon 4870 graphics card.
    I have two workarounds that may be of assistance in relieving this issue. They work for me however before I discuss what they I'd like to set the scene.
    Like many of us, I have trawled this forum and many others including COW and so on mostly relying on those 10-12 (the dozen or so) excellent tips from people like Mark Spencer and others. This includes the usual things like turning off rendering options that make heavy use of CPU/GPU etc.
    Caveat: I'd also like to note here that this performance sluggishness has absolutely nothing to do (and is completely unrelated to) I/O performance nor is it related to memory usage. The reason I say this is because during some testing and the normal practice I keep all a Motion.app cache files (autosave, cached files etc) out on a very fast PROAVIO EB8NS disk array with ATTO R380 HBA onto SAS paths where this box is capable of over 450 MB per second measured with Kona system test tool. Additionally I have 12 GB of memory on this Mac pro which I assigned 70% of it to be available to Motion.app V4. The sluggishness Motion.app V4 is not manifest itself through the usual items such as excessive virtual memory page in/out or swap in/out activity. In fact in this scenario I describe below in my system when nothing else is running the former is non-existent! Additionally I also want to know that Motion.app V4 in my scenario/situation/environment is definitely and certainly NOT impacted by insufficient I/O bandwidth..
    However, like many people, who have the same or similar setup to myself, we experience severe delays the most basic Motion.app UI such as: selecting an item, scrubbing through the timeline, performing any kind of transform etc etc. Many of us trying to diagnose this problem (looking for any kind of diagnostics or messages etc) have noticed that with the exception of one single core, the remaining cores to do very little (idle or just barely moving) whilst the remaining single core is taking out at 100% constantly.
    Many months ago whilst really bogged down with this problem trying to complete a project, I contacted Mark Spencer who politely explained that notion exploits the on-board graphics card (in my case the ATI Radeon HD 4870). After frustratingly trying to improve the performance of this and completely reinstalling Final Cut Suite in a different brand-new (at the time MacOS X 10.5.6), I found that there was little difference.
    I am mentioning all this because, I know that a few colleagues have had a similar problem and have not found any satisfaction in looking at this despite many well-informed forum users who offer excellent advice.
    At my wits end (currently), I took a few days to try and isolate what the problems may be caused by (what exacerbates this severely degraded performance). This user interface sludgy degradation is manifested through the UI also has the (spinning beach ball).
    I isolated pieces in some of the Motion.app projects and started to ISOLATE (Control-I) what I thought were quite complex layers and individual objects but to no avail. I then resorted to completely deleting them with some improvement in performance (noticeably less sluggyness) however it still was not lightning fast as I expected considering it I was in draft mode, 720 p resolution, with lighting, shadows and reflections completely turned off in the view.
    *Motion.app BEHAVIOURS*: after some hours and a great deal of trial and error (non-productive work time I might add) it occurred to me that some of the Motion.app behaviours in particular place in the layer with as few as five objects in the layer (behaviours such as "Motion.app path", "wriggle", "oscillate" and even good old trusted "throw" seem to be the culprits in this particular layer.
    I will note well here at this point, but of course "camera layers" does seem to be affected at all with the basic movements such as Dolly, frame, sweep etc. I have some sets up to 4 or five cameras which seems not to bother Motion.app at all!
    *OBJECT SELECTION (S):* yes this also seems to have some degrading impact on playout, scrubbing and so on. Interesting I thought.
    Workarounds: here are a few things that I know that work to get around some problems of working where Motion.app is extremely SLUGGY in the user interface (UI). Perhaps someone has already noted these on a forum or posted on however I couldn't find them.
    So my workflow/practice here is to do the following when I'm manipulating objects (placement, set up, applying filters, adjusting timeline, and so on):
    +WORKAROUND #1+: *DISABLE the behaviours* in the layers where you are performing any object manipulation. In fact we have many objects in many layers where the topmost layer (a group of nested layers) contains any behaviours, I would suggest you disable those whilst you work on that particular layer.
    It's a very simple stylus click to enable the BEHAVIOURS layers that you have been working on to see what the effect of those behaviours when you want to play them out in the player/canvas.
    I have no idea why such trivial behaviours cause my very expensive Mac pro to nearly lock up whilst in Motion.app version 4 and also version 3. Anyway is definitely works on me.
    +WORKAROUND #2+: *DESELECT ANY ITEM IN THE CANVAS* (in any view) when attempting to play out whilst in the canvas. Again I don't know why having one or more items (including the camera) insert would have such a drastic impact on the performance of Motion.app to play out what I think is a frivolous range, however this really works for me.
    *How to measure the performance or how to monitor the performance/usage of the ATI Radeon HD 4870 graphics card from MacOS X?* I would like to know exactly what this is doing on my system when one of the CPU cores is pegged out in 100% servicing requests from Motion.app. I can't find utility (which am willing to pay for) that sees the ATI Radeon HD 4870 graphics card. One I thought would have is an application called atMonitor.app (http://www.atpurpose.com/atMonitor/) which seems to do a pretty good job on my uni body MacBook Pro and wife's Macbook Air.
    It would seem that any of the utilities don't seem to see the ATI Radeon HD 4870 or if they do and they initiate commands to it that the ATI Radeon HD 4870 and doesn't respond or send any replies status information. (Beats me I'm not a technical person these days)
    Summary: I would be very interested if other people who have a similar if not pretty near exact setup as myself have found these two suggestions useful. I have tried some of these Motion.app projects on my MacBook Pro uni-body and with some difference the MacBook Pro exhibits similar sluggyness to this Mac pro.
    W
    Hong Kong

    Mark, I took your advice and reinstall Final Cut Suite Version 3 (including Motion.app version 4.0.1) onto a completely different and I'm used file system including a brand-new install of MacOS X snow leopard 10.6.1, which I believe is the most recent update.
    To be clear, I have all the latest Pro Applications updates as well apply to this brand-new system.
    So here is the *bad new*s.
    *Using exactly the same hardware configuration as I described in this theme of woe, I launched Motion.app V4 .0 .1 and opened up several of the projects that I'm having trouble with that is issued.*
    Simply, the symptoms and observation I described in this thread exists with a brand-new installation.
    Anyway looks like I have a backup/another instance available Final Cut Pro in case my main production image has trouble.
    Once again, as I described initially in this thread, I used the two workarounds to overcome the consistent and overwhelmingly an exaggerated 20 seconds lag on average interactions with Motion.app with the success that I'd described previously.
    In another thread back in September 2009, a forum poster mentioned that he felt that the camera framing behaviours were the root of this problem. And to this end he advised converting these behaviours to keyframes using the command-K ("convert to keyframes") to overcome his misery.
    This indeed does work very well. So this is the third workaround and I'm starting to use.
    Further I have done some more hard comparisons with my 2009 MacBook pro uni-body 2.93 GHz with a standard arrangement of 4 MB of memory and the usual disk internally. *To my great surprise*, I found that the projects that I'm having a lot of trouble with were much more responsive not only with the camera framing behaviours (which I'm not particularly having any trouble with), but the layers that contains a simple transform behaviours such as "motion path", "wiggle", and so on did not seem to bother the Mac book pro.
    I watched the CPU cores on the Mac book pro maybe go to 80% while the project was loading, and also whilst I gingerly navigated through the project although feeling a little sluggy was far less in orders of 10 to 20 seconds faster than this Mac pro Nehalem with all the bells and whistles on my earnings embedded within it.
    Now I'm starting to wonder, as Andy pointed out, +maybe there is some trouble with the hardware in this system+. I really could not know how to determine if this is the case. However before I draw this conclusion finally, I noticed that there are a lot more people out there with the same consideration as I have that have this same problem. It's not narrowed down to those owners with the ATI Radeon HD 4870 graphics card, however these seem to be the bulk of the people who are trying to do things that are getting a fair amount of forum time (like me).
    There certainly seems to be something of an issue as there are some symptom dumps for Motion.app but only one or 2 to over this period that seemed to be triggered by something on this machine. And like many on this forum I gave up reading dumps for a living back in the 1990s.
    I would really like to know how I can diagnose this problem before I had to pack this Mac pro up and carted back to the local Apple care centre here in Hong Kong (which means I won't have it forever while, which means no income). Yes I can use my Mac book pro uni-body which is I might end up doing.
    _Oh, and this little gem._ I find that if I invoke the "timeline pane/window" (command-7), that it can take up to 2 seconds to refresh the screen. It is amazingly slow and feel like there is definitely something wrong.
    If I have a simple motion project by that I mean some simple plates some moving text and no real 3-D except for one little camera Motion.app V 4 seems to work quite okay.
    The sets that I'm working in at about eight or nine cameras over the timeline and maybe three or four sets in the project. This is not the work I think especially when most of the moving here is a few objects wobbling around in 3-D space and quick camera moves using the camera framing behaviour.
    In summary, having spent what seems to be 40 or 50 hours messing with this issue are not doing anything productive, I've come to the conclusion that there is definitely something wrong with this setup that I have. However having had no problem with that up until now (I know actually I had some problems back in May 2009 with it but it seemed that install a Final Cut Suite version 2 completely fixed it.
    And I am totally surprised that my Mac book pro uni-body if pressed can do the job that I want.
    Therefore Motion Forum users, I really don't know what else there is to do other than to poke around over time and eventually something will fix this because it is really very frustrating and like many of us on this forum I did endeavour to pay for/put capital funds into a system highly recommended by many that uses Apple production applications than I expected it would work.
    By the way, I noticed when I use Nuke version 5 and Shake V 4.1 and even Maya PE, I don't have these issues but will concede that I doubt whether the use applications take advantage directly of the GPU arrangement in the graphics card like Motion.app does.
    That's all I have.
    Any other thoughts are most welcome.
    W

  • MBP, 15", mid-2010, Yosemite, is sluggish!

    Hello,
    I have read the post below this one "MacBook suddenly started running slow" posted by "stephjonas", and have completed the first step given by Linc as follows....  (also, I checked my battery cycle count which is 262 out of a maximum of 1,000)
                   "First, back up all data immediately, as your boot drive might be failing.
                   Step 1
                   This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself,                solve your problem.
                   If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web                browser. If you use another browser, they may not work as described.
                   Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|find tok|n Cause: -' | tail | open -ef
                   Copy the selected text to the Clipboard (command-C).
                   Launch the Terminal application in any of the following ways:
                   ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
                   ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that                opens.
                   ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
                   Paste into the Terminal window (command-V).
                   The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
                   A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the                TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit                window doesn't matter, and you don't need to post that."
    I completed this step and the anonymized results are as follows:
    Mar 17 12:01:49 MBP kernel[0] <Notice>: eFmreamwoerkwos/rSyksn/cSMaerilUviIc.fersa.mferawmorewko/rkVe/Vrseiorsnsi/onA/s /AM/SayilncSUIerv
    Mar 17 12:01:57 MBP kernel[0] <Notice>: iokWa timit temccfsohoouk wait 19t119651 :v1:0s:api2 3timeou:t /Sy1912stem/1L6i9b7:r1a:0:r2y3://SystPrievatm/eLiFbrrameworary/Frkasm/eworEkxsc /hLaantgeenWteSbeSmearnvtiicceMsa.pfpingr.aframewomrekw/oVrekr/sVieornssi/oAn/sL /aAt/eEnxtchangSemeanWetbicMServicappiesn
    Mar 17 12:02:39 MBP kernel[0] <Notice>: 2vate7:Framew/orarks/ExchangSystmeWebSemewervi/oLrkces.framewoibrsrary/Sugk//Fg eVersirstiaonmons/A/es.wExchaframeorworngeWekbServkices/s
    Mar 17 12:03:15 MBP kernel[0] <Notice>: TTMMCCFCCSF S 11  MMSSGG  HoHookokWaWaiitt  ttmmcccfcfshshoook owk aiwait tvs apvis tapii metoimuet out 2103319813781:7571::10::0:282:8://SSyysstteemm//LLiibbrraarryy//FPrarmewivoatre ksF/Nroamteifwiorcakst/iSounCgegentsteior.nfrs.amfreawmeorwok/rVekrs/ioVnes/rAsi /oNontsi/fA/iSucggaetstiioonnsC
    Mar 17 12:03:18 MBP kernel[0] <Notice>: TMCCTFMSCC FS 29728  MSMSGG  HHooookWkaiWtai tt mtccmfcshcofosk hwoaiotk  vwsaapiit t ivmesoaupit  timeo2u26t 35383:209911:3607::281::0:/2U8:ser/s/Apmploniiccaati/oLnisb/raMrye/Pssrageefser .enacpeps/C/oncteontms.a/ppRlee.isCouarcles./Epnligstl
    Mar 17 12:03:21 MBP kernel[0] <Notice>: TMCCFS 1 MSG HookWait tTMmCccCfsFSh ook 1w aiMSGt v sHoapoki Wtiaimetou tt mccfsho1ok9 w3ai8t1 7v57s:api1 t:imeo0u:t 28:210/33S81y7:st1e:m/0Li:bra2ry8/:Priva/SteyFsrteamme/Lwiborrakrsy/F/rSuamegwo gresksti/oNontsi.ffraicmeawtioornk/CVenertesiorn.sfr/Aa/Smugewgorek/sVetrsioions n
    Mar 17 12:08:47 MBP kernel[0] <Notice>: TTMMCCCCFSFS  333148  MSMGS GH oHoookkWaWita titm cctfmcscfhosohkoo wkai wt aivst avpisa tpii tmiemeooutu t 21190156282659:061::10::08::8:/Sys/Utseme/rsLi/bmraornyi/Pcrai/vaLtiebFrramaerw y/oAprplksi/IcaCAtNoiotin fiSucpapotrti/onCsal.lfrHiamstewooryrDkB//VeCrasilonlHsis/At/orIy.sCAtNorotedia tfaic-sathimo
    Mar 18 12:57:36 MBP kernel[0] <Notice>: disk1: I/O error.
    --- last message repeated 5 times ---
    Mar 19 13:13:36 MBP kernel[0] <Notice>: nspace-handler-unblock: did not find token 5413
    Also, I ran Etrecheck and here are those results:
    Problem description:
    MBP is sluggish, slow, and hangs up constantly!!!!!!!
    EtreCheck version: 2.1.8 (121)
    Report generated March 20, 2015 at 9:17:36 AM CDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro6,2
        1 2.8 GHz Intel Core i7 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 262
    Video Information: ℹ️
        Intel HD Graphics - VRAM: 288 MB
            Color LCD 1680 x 1050
        NVIDIA GeForce GT 330M - VRAM: 512 MB
    System Software: ℹ️
        OS X 10.10.2 (14C1510) - Time since boot: 0:18:0
    Disk Information: ℹ️
        Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (342.91 GB free)
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Logitech USB Optical Mouse
        Apple Inc. Built-in iSight
        Apple Computer, Inc. IR Receiver
    Configuration files: ℹ️
        /etc/hosts - Count: 3
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/LaCie Desktop Manager.app
        [not loaded]    com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) [Click for support]
        [not loaded]    com.jmicron.driver.jmPeripheralDevice (2.0.4) [Click for support]
        [not loaded]    com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) [Click for support]
        [not loaded]    com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) [Click for support]
            /System/Library/Extensions
        [loaded]    com.globaldelight.driver.VoilaDevice (1.1 - SDK 10.1) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.intego.backupassistant.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [loaded]    com.trendmicro.itis.dca.plist [Click for support]
        [running]    com.trendmicro.itis.uimgmt.agent.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.adobe.versioncueCS3.plist [Click for support]
        [running]    com.intego.BackupAssistant.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.trendmicro.icore.av.plist [Click for support]
        [running]    com.trendmicro.icore.main.plist [Click for support]
        [running]    com.trendmicro.icore.wp.plist [Click for support]
        [running]    com.trendmicro.itis.plugin.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
        [loaded]    com.facebook.videochat.[redacted].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.trendmicro.itis.uninstaller.plist [Click for support]
    User Login Items: ℹ️
        Microsoft AU Daemon    Application  (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
        iTunesHelper    UNKNOWN  (missing value)
        AdobeResourceSynchronizer    Application  (/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app)
        Launch Nikon Message Center 2    Application  (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
        Launch Nikon Message Center 2    Application  (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
    Internet Plug-ins: ℹ️
        DirectorShockwave: Version: 12.0.3r133 - SDK 10.6 [Click for support]
        Unity Web Player: Version: UnityPlayer version 3.4.0f5 - SDK 10.5 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        NP_2020Player_WEB: Version: 5.0.91.0 - SDK 10.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        Trend Micro Toolbar
    3rd Party Preference Panes: ℹ️
        Adobe Version Cue CS3  [Click for support]
        Flash Player  [Click for support]
        FUSE for OS X (OSXFUSE)  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 498.88 GB Disk used: 155.97 GB
        Destinations:
            LaCie [Local]
            Total size: 999.86 GB
            Total number of backups: 9
            Oldest backup: 2015-02-08 20:46:29 +0000
            Last backup: 2015-03-19 00:48:06 +0000
            Size of backup disk: Adequate
                Backup size 999.86 GB > (Disk used 155.97 GB X 3)
    Top Processes by CPU: ℹ️
             4%    WindowServer
             2%    Activity Monitor
             1%    sysmond
             0%    AppleSpell
             0%    fontd
    Top Processes by Memory: ℹ️
        137 MB    mds_stores
        103 MB    Finder
        86 MB    iCoreService_av
        86 MB    Messages
        77 MB    WindowServer
    Virtual Memory Information: ℹ️
        5.15 GB    Free RAM
        1.60 GB    Active RAM
        794 MB    Inactive RAM
        1.04 GB    Wired RAM
        1.46 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 20, 2015, 08:49:07 AM    Self test - passed
        Mar 19, 2015, 07:48:11 PM    /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-19-194811_[ redacted].cpu_resource.diag [Click for details]
        Mar 19, 2015, 03:35:35 PM    /Library/Logs/DiagnosticReports/discoveryd_2015-03-19-153535_[redacted].cpu_res ource.diag [Click for details]
        Mar 19, 2015, 03:25:32 PM    /Library/Logs/DiagnosticReports/firefox_2015-03-19-152532_[redacted].hang
        Mar 19, 2015, 02:24:11 PM    /Library/Logs/DiagnosticReports/Install Adobe Flash Player_2015-03-19-142411_[redacted].crash
        Mar 19, 2015, 02:05:29 PM    /Library/Logs/DiagnosticReports/Install Adobe Flash Player_2015-03-19-140529_[redacted].crash
        Mar 19, 2015, 01:57:08 PM    /Library/Logs/DiagnosticReports/discoveryd_2015-03-19-135708_[redacted].cpu_res ource.diag [Click for details]
        Mar 18, 2015, 12:59:39 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/cfprefsd_2015-03-18-125939_[re dacted].crash
        Mar 18, 2015, 12:59:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/cfprefsd_2015-03-18-125916_[re dacted].crash
        Mar 18, 2015, 12:58:29 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/cfprefsd_2015-03-18-125829_[re dacted].crash
        Mar 18, 2015, 12:58:03 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/cfprefsd_2015-03-18-125803_[re dacted].crash
        Mar 17, 2015, 11:59:28 AM    /Library/Logs/DiagnosticReports/iCoreService_2015-03-17-115928_[redacted].crash
    WHAT DO I NEED TO DO NEXT?  Thank you all in advance...

    "Hacked" is not my terminology, and I don't believe it's intended to be derogatory. What you describe is a perfectly legitimate reason to alter Hosts.
    If your Mac still isn't working as expected after uninstalling Intego and Trend Micro, read on. The necessity to have a reliable backup cannot be overstated, since what you describe may be an indication of impending disk failure.
    Back up your Mac if you have not already done so. To learn how to to that read Mac Basics: Time Machine backs up your Mac - Apple Support
    If your Mac is momentarily unresponsive, consider the following.
    Launch the Console app - it is in your Utilities folder. You can find it by selecting Utilities from the Finder's Go menu.
    If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu. Select Show Toolbar if it is not already shown.
    Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's problem.
    To do that click the Clear Display button in the Toolbar. All previously displayed log entries will be disappear.
    Next: Perform whatever actions cause the Mac to exhibit the slow behavior. If the problem is caused by errors logged by the system, the Console window will show them being recorded in system.log.
    One or more of them, along with their time stamps, may reveal the reason for the problem you describe.
    Copy and paste those log entries in a reply. If hundreds of the same repetitive messages appear, please edit them before posting. There should be no need for more than a few log entries.
    Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

  • MPEG4 video from imovie is sluggish and audio out of sync

    Hi y'all,
    I am new to this. So I need some hand holding here. I am working with video that was exported in MPEG4 video from imovie on a mac.
    The Camera I used is a Sony FX7 HD camera with SD tape.
    So Now I am trying to edit the video using Premiere Pro CS3 creative suite.
    Import into CS3 is fine. Playing the imported video in the source monitor is fine as well. All looks well.
    However, here are the challenges I am having:
    1. When I try to play it in the Program monitor its very sluggish. Audio plays fine but picture lags behind.
    2. And once I edit the the video and try to export it as flash video or as a windows media, the video and audio are out of sync.
    The video is choppy as well.
    Details: source video is 720x480 and trying to export to 320x240
    My project details are:
    DV-NTSC standard 48khz
    Video is 10 min long

    OK, not my choice of workflows, but... I assume that the MP4's are H.264 encoded. There are many of these. Three common ones are Lead, MainConcept and Apple. Some find that one works better than the others. These are not the ONLY versions, but are common. You might want to explore others, depending on which one you have installed. G-Spot can tell you which you have.
    Next, you can Render your Timeline, to get things as smooth as possible.
    Note that the MP4 files are heavily compressed already. Quality has been lost, and there is nothing that can be done about that. When you Export to, say DVD, you will recompress that material, and loose even more.
    In the future, have your Mac-person do the Capture to .MOV [Animation CODEC]. Or, do it yourself to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio.
    Not sure of any other ways to get the MP4's playing more smoothly. Much will depend on both your CPU and on your system's I/O sub-system, i.e. your HDD's, their size, speed, controller type and how they are utilized.
    Good luck,
    Hunt

  • [webgl] sluggish performance ( /dev/nvidia0 Operation not permitted )

    We (folks on #archlinux already tried helping) have been at this for hours now... no solution found yet.
    summary: webgl works but performance is sluggish(20 to 30fps) which makes me assume it's falling back to software rendering for some unknown reason
    already tried many things: vmalloc kernel parameters, irq control left to bios/archlinux, being in the video group, not being in the video group, having an xorg.conf, not having an xorg.conf, different AGP aperture sizes in BIOS, regular gl performance is normal (60 fps (capped to display refresh) in glxgears), only webgl slugs, card (GT 7600 256MB VRAM) should support the required shader language version for webgl (and webgl performance is only sluggish in linux... so I think it must be a configuration issue on some driver/kernel/browser setting?)
    Different browsers show different messages when started from the console but I don't know what to make of those and googling them did not reveal any solutions so far either.
    browsers tested: firefox, google-chrome(from AUR), chromium
    window managers tested: enlightenment, fluxbox
    kernel: linux-lts
    driver: nvidia-304xx-lts (can not use Nouveau as Nouveau keeps locking up the GPU)
    It's a fresh archlinux installation (Ubuntu had the same performance problem btw in case that might be useful to know for looking for the cause).
    Everything I tried so far, did not change anything about the sluggish webgl performance problem.
    One thing I noticed is that /dev/nvidia0 and /dev/nvidiactl both do not exist until after "startx". Could that be a problem?
    Here are some logs, hoping someone sees something which looks suspicious and knows what else I could try to make it work.
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.14.23-1-lts (nobody@home-andyrtr-arch64-chroots-testing-x86_64-andyrtr) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP Thu Oct 30 19:41:12 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux-lts ipv6.disable=1 vmalloc=256M root=/dev/sda1 rw initrd=../initramfs-linux-lts.img
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005ffbffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000005ffc0000-0x000000005ffcffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000005ffd0000-0x000000005fffffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff7c0000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.3 present.
    [ 0.000000] DMI: ASUSTek Computer Inc. K8N-E-Deluxe/'K8N-E-Deluxe', BIOS 1012.007 01/18/2006
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP bridge at 00:00:00
    [ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
    [ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
    [ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
    [ 0.000000] e820: last_pfn = 0x5ffc0 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
    [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
    [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
    [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x5fa00000-0x5fbfffff]
    [ 0.000000] [mem 0x5fa00000-0x5fbfffff] page 2M
    [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x5c000000-0x5f9fffff]
    [ 0.000000] [mem 0x5c000000-0x5f9fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x5bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x5fc00000-0x5ffbffff]
    [ 0.000000] [mem 0x5fc00000-0x5fdfffff] page 2M
    [ 0.000000] [mem 0x5fe00000-0x5ffbffff] page 4k
    [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x5fc97000-0x5ffbffff]
    [ 0.000000] ACPI: RSDP 00000000000f9cb0 000014 (v00 ACPIAM)
    [ 0.000000] ACPI: RSDT 000000005ffc0000 000030 (v01 A M I OEMRSDT 01000618 MSFT 00000097)
    [ 0.000000] ACPI: FACP 000000005ffc0200 000081 (v02 A M I OEMFACP 01000618 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 000000005ffc0400 004524 (v01 A0055 A0055003 00000003 INTL 02002026)
    [ 0.000000] ACPI: FACS 000000005ffd0000 000040
    [ 0.000000] ACPI: APIC 000000005ffc0390 000068 (v01 A M I OEMAPIC 01000618 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 000000005ffd0040 000041 (v01 A M I OEMBIOS 01000618 MSFT 00000097)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] Scanning NUMA topology in Northbridge 24
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005ffbffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5ffbffff]
    [ 0.000000] NODE_DATA [mem 0x5fc92000-0x5fc96fff]
    [ 0.000000] [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005dc00000-ffff88005f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x5ffbffff]
    [ 0.000000] On node 0 totalpages: 393054
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 6079 pages used for memmap
    [ 0.000000] DMA32 zone: 389056 pages, LIFO batch:31
    [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    [ 0.000000] If you got timer trouble try acpi_use_timer_override
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: BIOS IRQ0 override ignored.
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] ACPI: IRQ14 used by override.
    [ 0.000000] ACPI: IRQ15 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
    [ 0.000000] e820: [mem 0x60000000-0xfebfffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88005fa00000 s86656 r8192 d23936 u2097152
    [ 0.000000] pcpu-alloc: s86656 r8192 d23936 u2097152 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386890
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux-lts ipv6.disable=1 vmalloc=256M root=/dev/sda1 rw initrd=../initramfs-linux-lts.img
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] AGP bridge at 00:00:00
    [ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
    [ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
    [ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
    [ 0.000000] Node 0: aperture @ e0000000 size 256 MB
    [ 0.000000] Memory: 1532388K/1572216K available (5187K kernel code, 858K rwdata, 1640K rodata, 1136K init, 1300K bss, 39828K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
    [ 0.000000] NR_IRQS:8448 nr_irqs:256 16
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 6291456 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2210.711 MHz processor
    [ 0.010032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4421.42 BogoMIPS (lpj=22107110)
    [ 0.010037] pid_max: default: 32768 minimum: 301
    [ 0.010061] ACPI: Core revision 20131218
    [ 0.020405] ACPI: All ACPI Tables successfully acquired
    [ 0.020642] Security Framework initialized
    [ 0.020671] Yama: becoming mindful.
    [ 0.020955] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.025410] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.027465] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.027473] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.028144] Initializing cgroup subsys memory
    [ 0.028166] Initializing cgroup subsys devices
    [ 0.028170] Initializing cgroup subsys freezer
    [ 0.028173] Initializing cgroup subsys net_cls
    [ 0.028177] Initializing cgroup subsys blkio
    [ 0.028234] tseg: 0000000000
    [ 0.028253] mce: CPU supports 5 MCE banks
    [ 0.028279] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
    tlb_flushall_shift: 6
    [ 0.034575] Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
    [ 0.035713] ftrace: allocating 20111 entries in 79 pages
    [ 0.049994] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    [ 0.150150] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 0c, stepping: 00)
    [ 0.160000] Performance Events: AMD PMU driver.
    [ 0.160000] ... version: 0
    [ 0.160000] ... bit width: 48
    [ 0.160000] ... generic registers: 4
    [ 0.160000] ... value mask: 0000ffffffffffff
    [ 0.160000] ... max period: 00007fffffffffff
    [ 0.160000] ... fixed-purpose events: 0
    [ 0.160000] ... event mask: 000000000000000f
    [ 0.160000] x86: Booted up 1 node, 1 CPUs
    [ 0.160000] smpboot: Total of 1 processors activated (4421.42 BogoMIPS)
    [ 0.160000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.160000] devtmpfs: initialized
    [ 0.160000] PM: Registering ACPI NVS region [mem 0x5ffd0000-0x5fffffff] (196608 bytes)
    [ 0.160000] pinctrl core: initialized pinctrl subsystem
    [ 0.160056] RTC time: 14:37:08, date: 11/06/14
    [ 0.160148] NET: Registered protocol family 16
    [ 0.160332] cpuidle: using governor ladder
    [ 0.160334] cpuidle: using governor menu
    [ 0.160347] node 0 link 0: io port [1000, ffffff]
    [ 0.160351] TOM: 0000000060000000 aka 1536M
    [ 0.160356] node 0 link 0: mmio [a0000, bffff]
    [ 0.160359] node 0 link 0: mmio [60000000, fe0bffff]
    [ 0.160363] bus: [bus 00-ff] on node 0 link 0
    [ 0.160365] bus: 00 [io 0x0000-0xffff]
    [ 0.160367] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.160369] bus: 00 [mem 0x60000000-0xfcffffffff]
    [ 0.160397] ACPI: bus type PCI registered
    [ 0.160401] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.160498] PCI: Using configuration type 1 for base access
    [ 0.161627] bio: create slab <bio-0> at 0
    [ 0.161792] ACPI: Added _OSI(Module Device)
    [ 0.161794] ACPI: Added _OSI(Processor Device)
    [ 0.161795] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.161797] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.163305] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.164921] ACPI: Interpreter enabled
    [ 0.164937] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    [ 0.164955] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.164958] ACPI: Using IOAPIC for interrupt routing
    [ 0.164998] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.165137] ACPI: No dock devices found.
    [ 0.170533] ACPI: Power Resource [ISAV] (on)
    [ 0.173609] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.173619] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
    [ 0.173626] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.173736] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.173739] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.173742] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.173745] acpi PNP0A03:00: host bridge window [mem 0x60000000-0xff7bffff] (ignored)
    [ 0.173749] PCI: root bus 00: hardware-probed resources
    [ 0.173755] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
    [ 0.173915] PCI host bridge to bus 0000:00
    [ 0.173919] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.173922] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.173925] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.173928] pci_bus 0000:00: root bus resource [mem 0x60000000-0xfcffffffff]
    [ 0.173943] pci 0000:00:00.0: [10de:00e1] type 00 class 0x060000
    [ 0.173955] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
    [ 0.174087] pci 0000:00:01.0: [10de:00e0] type 00 class 0x060100
    [ 0.174184] pci 0000:00:01.1: [10de:00e4] type 00 class 0x0c0500
    [ 0.174192] pci 0000:00:01.1: reg 0x10: [io 0x5080-0x509f]
    [ 0.174203] pci 0000:00:01.1: reg 0x20: [io 0x5000-0x503f]
    [ 0.174207] pci 0000:00:01.1: reg 0x24: [io 0x5040-0x507f]
    [ 0.174221] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [ 0.174311] pci 0000:00:02.0: [10de:00e7] type 00 class 0x0c0310
    [ 0.174319] pci 0000:00:02.0: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
    [ 0.174342] pci 0000:00:02.0: supports D1 D2
    [ 0.174345] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.174378] pci 0000:00:02.0: System wakeup disabled by ACPI
    [ 0.174441] pci 0000:00:02.1: [10de:00e7] type 00 class 0x0c0310
    [ 0.174448] pci 0000:00:02.1: reg 0x10: [mem 0xfebfe000-0xfebfefff]
    [ 0.174472] pci 0000:00:02.1: supports D1 D2
    [ 0.174474] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.174506] pci 0000:00:02.1: System wakeup disabled by ACPI
    [ 0.174565] pci 0000:00:02.2: [10de:00e8] type 00 class 0x0c0320
    [ 0.174573] pci 0000:00:02.2: reg 0x10: [mem 0xfebffc00-0xfebffcff]
    [ 0.174602] pci 0000:00:02.2: supports D1 D2
    [ 0.174605] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.174652] pci 0000:00:02.2: System wakeup disabled by ACPI
    [ 0.174721] pci 0000:00:05.0: [10de:00df] type 00 class 0x068000
    [ 0.174728] pci 0000:00:05.0: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
    [ 0.174733] pci 0000:00:05.0: reg 0x14: [io 0xec00-0xec07]
    [ 0.174755] pci 0000:00:05.0: supports D1 D2
    [ 0.174758] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.174790] pci 0000:00:05.0: System wakeup disabled by ACPI
    [ 0.174854] pci 0000:00:06.0: [10de:00ea] type 00 class 0x040100
    [ 0.174861] pci 0000:00:06.0: reg 0x10: [io 0xe800-0xe8ff]
    [ 0.174866] pci 0000:00:06.0: reg 0x14: [io 0xe400-0xe47f]
    [ 0.174870] pci 0000:00:06.0: reg 0x18: [mem 0xfebfb000-0xfebfbfff]
    [ 0.174890] pci 0000:00:06.0: supports D1 D2
    [ 0.174967] pci 0000:00:08.0: [10de:00e5] type 00 class 0x01018a
    [ 0.174983] pci 0000:00:08.0: reg 0x20: [io 0xffa0-0xffaf]
    [ 0.175075] pci 0000:00:0a.0: [10de:00e3] type 00 class 0x010185
    [ 0.175082] pci 0000:00:0a.0: reg 0x10: [io 0x09f0-0x09f7]
    [ 0.175087] pci 0000:00:0a.0: reg 0x14: [io 0x0bf0-0x0bf3]
    [ 0.175092] pci 0000:00:0a.0: reg 0x18: [io 0x0970-0x0977]
    [ 0.175096] pci 0000:00:0a.0: reg 0x1c: [io 0x0b70-0x0b73]
    [ 0.175101] pci 0000:00:0a.0: reg 0x20: [io 0xc800-0xc80f]
    [ 0.175105] pci 0000:00:0a.0: reg 0x24: [io 0xc400-0xc47f]
    [ 0.175191] pci 0000:00:0b.0: [10de:00e2] type 01 class 0x060400
    [ 0.175286] pci 0000:00:0e.0: [10de:00ed] type 01 class 0x060400
    [ 0.175325] pci 0000:00:0e.0: System wakeup disabled by ACPI
    [ 0.175388] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
    [ 0.175468] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
    [ 0.175549] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
    [ 0.175627] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
    [ 0.175752] pci 0000:01:00.0: [10de:02e0] type 00 class 0x030000
    [ 0.175770] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
    [ 0.175780] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff pref]
    [ 0.175790] pci 0000:01:00.0: reg 0x18: [mem 0xfc000000-0xfcffffff]
    [ 0.175821] pci 0000:01:00.0: reg 0x30: [mem 0xfe9e0000-0xfe9fffff pref]
    [ 0.175934] pci 0000:00:0b.0: PCI bridge to [bus 01]
    [ 0.175940] pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff]
    [ 0.175943] pci 0000:00:0b.0: bridge window [mem 0xba800000-0xda7fffff pref]
    [ 0.175986] pci 0000:02:0b.0: [1106:3044] type 00 class 0x0c0010
    [ 0.175998] pci 0000:02:0b.0: reg 0x10: [mem 0xfeaff800-0xfeafffff]
    [ 0.176005] pci 0000:02:0b.0: reg 0x14: [io 0xbc00-0xbc7f]
    [ 0.176047] pci 0000:02:0b.0: supports D2
    [ 0.176049] pci 0000:02:0b.0: PME# supported from D2 D3hot D3cold
    [ 0.176124] pci 0000:00:0e.0: PCI bridge to [bus 02]
    [ 0.176127] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
    [ 0.176130] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.176957] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
    [ 0.177043] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
    [ 0.177127] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
    [ 0.177211] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
    [ 0.177294] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
    [ 0.177374] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *11
    [ 0.177454] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
    [ 0.177533] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
    [ 0.177612] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
    [ 0.177706] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *9
    [ 0.177786] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
    [ 0.177867] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
    [ 0.177947] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0
    [ 0.178035] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
    [ 0.178144] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
    [ 0.178495] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.178498] vgaarb: loaded
    [ 0.178499] vgaarb: bridge control possible 0000:01:00.0
    [ 0.178573] PCI: Using ACPI for IRQ routing
    [ 0.178578] PCI: pci_cache_line_size set to 64 bytes
    [ 0.178617] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [ 0.178621] e820: reserve RAM buffer [mem 0x5ffc0000-0x5fffffff]
    [ 0.178834] NetLabel: Initializing
    [ 0.178836] NetLabel: domain hash size = 128
    [ 0.178838] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.178866] NetLabel: unlabeled traffic allowed by default
    [ 0.178945] Switched to clocksource refined-jiffies
    [ 0.193118] pnp: PnP ACPI init
    [ 0.193168] ACPI: bus type PNP registered
    [ 0.193275] pnp 00:00: [dma 4]
    [ 0.193336] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.193401] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.193439] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.193480] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.193867] pnp 00:04: [dma 2]
    [ 0.193932] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.194190] pnp 00:05: [dma 3]
    [ 0.194334] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.194597] pnp 00:06: Plug and Play ACPI device, IDs PNPb006 (active)
    [ 0.194863] system 00:07: [io 0x0190-0x0193] has been reserved
    [ 0.194867] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.194870] system 00:07: [io 0x4000-0x40ff window] has been reserved
    [ 0.194873] system 00:07: [io 0x4400-0x44ff window] has been reserved
    [ 0.194876] system 00:07: [io 0x4800-0x48ff window] has been reserved
    [ 0.194881] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.194987] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.194990] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.194993] system 00:08: [mem 0xff780000-0xff7bffff] has been reserved
    [ 0.194996] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.195070] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.195231] system 00:0a: [io 0x0480-0x0487] has been reserved
    [ 0.195234] system 00:0a: [io 0x0d00-0x0d07] has been reserved
    [ 0.195237] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.195468] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
    [ 0.195722] pnp 00:0c: [dma 0 disabled]
    [ 0.195790] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.196055] pnp 00:0d: [dma 0 disabled]
    [ 0.196135] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.196351] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.196355] system 00:0e: [mem 0x000c0000-0x000dffff] could not be reserved
    [ 0.196358] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.196360] system 00:0e: [mem 0x00100000-0x5fffffff] could not be reserved
    [ 0.196363] system 00:0e: [mem 0xff7c0000-0xffffffff] has been reserved
    [ 0.196366] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.196611] pnp: PnP ACPI: found 15 devices
    [ 0.196613] ACPI: bus type PNP unregistered
    [ 0.203623] Switched to clocksource acpi_pm
    [ 0.203683] pci 0000:00:0b.0: PCI bridge to [bus 01]
    [ 0.203692] pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff]
    [ 0.203696] pci 0000:00:0b.0: bridge window [mem 0xba800000-0xda7fffff pref]
    [ 0.203702] pci 0000:00:0e.0: PCI bridge to [bus 02]
    [ 0.203705] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
    [ 0.203709] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.203715] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.203718] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.203720] pci_bus 0000:00: resource 6 [mem 0x60000000-0xfcffffffff]
    [ 0.203723] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfe9fffff]
    [ 0.203726] pci_bus 0000:01: resource 2 [mem 0xba800000-0xda7fffff pref]
    [ 0.203730] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
    [ 0.203732] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.203816] NET: Registered protocol family 2
    [ 0.204157] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.204482] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.204915] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.205152] TCP: reno registered
    [ 0.205159] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.205233] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.205488] NET: Registered protocol family 1
    [ 0.205869] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
    [ 0.290220] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
    [ 0.370210] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
    [ 0.370416] pci 0000:01:00.0: Boot video device
    [ 0.370423] PCI: CLS 32 bytes, default 64
    [ 0.370570] Unpacking initramfs...
    [ 0.464290] Freeing initrd memory: 3236K (ffff88005fc97000 - ffff88005ffc0000)
    [ 0.464451] microcode: AMD CPU family 0xf not supported
    [ 0.464560] Scanning for low memory corruption every 60 seconds
    [ 0.465261] futex hash table entries: 256 (order: 2, 16384 bytes)
    [ 0.479534] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.481578] zbud: loaded
    [ 0.481785] VFS: Disk quotas dquot_6.5.2
    [ 0.481858] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.482120] msgmni has been set to 2999
    [ 0.482218] Key type big_key registered
    [ 0.482413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.482461] io scheduler noop registered
    [ 0.482463] io scheduler deadline registered (default)
    [ 0.482512] io scheduler cfq registered
    [ 0.482688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.482710] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.482841] GHES: HEST is not enabled!
    [ 0.482924] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.503487] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.524026] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
    [ 0.524343] Linux agpgart interface v0.103
    [ 0.524401] rtc_cmos 00:01: RTC can wake from S4
    [ 0.524562] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.524601] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
    [ 0.524617] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.524839] TCP: cubic registered
    [ 0.524845] IPv6: Loaded, but administratively disabled, reboot required to enable
    [ 0.524849] NET: Registered protocol family 17
    [ 0.525165] registered taskstats version 1
    [ 0.525574] Magic number: 6:546:636
    [ 0.525730] rtc_cmos 00:01: setting system clock to 2014-11-06 14:37:08 UTC (1415284628)
    [ 0.525790] PM: Hibernation image not present or could not be loaded.
    [ 0.529043] Freeing unused kernel memory: 1136K (ffffffff818d8000 - ffffffff819f4000)
    [ 0.529053] Write protecting the kernel read-only data: 8192k
    [ 0.534311] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
    [ 0.536542] Freeing unused kernel memory: 408K (ffff88000179a000 - ffff880001800000)
    [ 0.552237] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.560351] systemd-udevd[39]: starting version 216
    [ 0.592052] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.592059] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.592875] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.596938] Floppy drive(s): fd0 is 1.44M
    [ 0.614213] ACPI: bus type USB registered
    [ 0.614265] usbcore: registered new interface driver usbfs
    [ 0.614281] usbcore: registered new interface driver hub
    [ 0.614967] FDC 0 is a post-1991 82077
    [ 0.625659] SCSI subsystem initialized
    [ 0.633113] libata version 3.00 loaded.
    [ 0.633845] sata_nv 0000:00:0a.0: version 3.5
    [ 0.634191] ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22
    [ 0.634194] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
    [ 0.635580] usbcore: registered new device driver usb
    [ 0.636718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.637213] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.637384] ohci-pci: OHCI PCI platform driver
    [ 0.637732] ehci-pci: EHCI PCI platform driver
    [ 0.647435] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
    [ 0.647607] scsi0 : sata_nv
    [ 0.652697] scsi1 : sata_nv
    [ 0.652813] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 22
    [ 0.652817] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 22
    [ 0.653212] ohci-pci 0000:00:02.0: OHCI PCI host controller
    [ 0.653223] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
    [ 0.653279] ohci-pci 0000:00:02.0: irq 22, io mem 0xfebfd000
    [ 0.685200] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.700074] firewire_ohci 0000:02:0b.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
    [ 0.712351] hub 1-0:1.0: USB hub found
    [ 0.712367] hub 1-0:1.0: 4 ports detected
    [ 0.712766] ohci-pci 0000:00:02.1: OHCI PCI host controller
    [ 0.712776] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
    [ 0.712845] ohci-pci 0000:00:02.1: irq 21, io mem 0xfebfe000
    [ 0.772298] hub 2-0:1.0: USB hub found
    [ 0.772346] hub 2-0:1.0: 4 ports detected
    [ 0.773212] ehci-pci 0000:00:02.2: EHCI Host Controller
    [ 0.773228] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 3
    [ 0.773242] ehci-pci 0000:00:02.2: debug port 1
    [ 0.773285] ehci-pci 0000:00:02.2: cache line size of 32 is not supported
    [ 0.773315] ehci-pci 0000:00:02.2: irq 20, io mem 0xfebffc00
    [ 0.790050] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
    [ 0.790381] hub 3-0:1.0: USB hub found
    [ 0.790395] hub 3-0:1.0: 8 ports detected
    [ 0.880074] hub 1-0:1.0: USB hub found
    [ 0.880086] hub 1-0:1.0: 4 ports detected
    [ 0.970117] hub 2-0:1.0: USB hub found
    [ 0.970134] hub 2-0:1.0: 4 ports detected
    [ 0.970356] pata_amd 0000:00:08.0: version 0.4.1
    [ 0.973849] scsi2 : pata_amd
    [ 0.974094] scsi3 : pata_amd
    [ 0.974162] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [ 0.974165] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [ 0.980098] ata1: SATA link down (SStatus 0 SControl 300)
    [ 1.110030] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.190443] ata3.00: ATA-6: IC35L120AVV207-0, V24OA63A, max UDMA/100
    [ 1.190446] ata3.00: 241254720 sectors, multi 16: LBA48
    [ 1.190651] ata3.01: ATA-7: Hitachi HDT725032VLAT80, V54OA42A, max UDMA/133
    [ 1.190654] ata3.01: 625142448 sectors, multi 16: LBA48
    [ 1.190664] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c7c000) ACPI=0x3f01f (20:15:0x1f)
    [ 1.190668] ata3: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc6c7c000) ACPI=0x7f01f (20:15:0x1f)
    [ 1.200168] firewire_core 0000:02:0b.0: created device fw0: GUID 00e0180000b91545, S400
    [ 1.250375] ata3.00: configured for UDMA/100
    [ 1.265023] usb-storage 3-1:1.0: USB Mass Storage device detected
    [ 1.265669] scsi4 : usb-storage 3-1:1.0
    [ 1.265808] usbcore: registered new interface driver usb-storage
    [ 1.290406] ata3.01: configured for UDMA/133
    [ 1.310032] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.310260] scsi 2:0:0:0: Direct-Access ATA IC35L120AVV207-0 V24O PQ: 0 ANSI: 5
    [ 1.310565] scsi 2:0:1:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
    [ 1.380033] usb 3-2: new high-speed USB device number 3 using ehci-pci
    [ 1.460029] tsc: Refined TSC clocksource calibration: 2210.758 MHz
    [ 1.490267] ata4.00: ATAPI: PIONEER DVD-RW DVR-107D, 1.21, max UDMA/33
    [ 1.490278] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c7c000) ACPI=0x701f (60:600:0x13)
    [ 1.510193] ata4.00: configured for UDMA/33
    [ 1.517016] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-107D 1.21 PQ: 0 ANSI: 5
    [ 1.530745] sd 2:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.530827] sd 2:0:1:0: [sdb] Write Protect is off
    [ 1.530831] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.530860] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.530988] sd 2:0:0:0: [sda] 241254720 512-byte logical blocks: (123 GB/115 GiB)
    [ 1.531050] sd 2:0:0:0: [sda] Write Protect is off
    [ 1.531053] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.531145] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.536391] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [ 1.536403] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.536800] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 1.542997] usb-storage 3-2:1.0: USB Mass Storage device detected
    [ 1.543072] sdb: sdb1
    [ 1.543976] scsi5 : usb-storage 3-2:1.0
    [ 1.567204] sd 2:0:1:0: [sdb] Attached SCSI disk
    [ 1.575313] sda: sda1 sda2
    [ 1.575840] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 1.660061] usb 3-3: new high-speed USB device number 4 using ehci-pci
    [ 1.810652] hub 3-3:1.0: USB hub found
    [ 1.810704] hub 3-3:1.0: 4 ports detected
    [ 2.210057] usb 2-2: new low-speed USB device number 2 using ohci-pci
    [ 2.261495] scsi 4:0:0:0: Direct-Access INTENSO USB 1100 PQ: 0 ANSI: 0 CCS
    [ 2.263859] sd 4:0:0:0: [sdc] 15858688 512-byte logical blocks: (8.11 GB/7.56 GiB)
    [ 2.264963] sd 4:0:0:0: [sdc] Write Protect is off
    [ 2.264968] sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
    [ 2.266088] sd 4:0:0:0: [sdc] No Caching mode page found
    [ 2.266143] sd 4:0:0:0: [sdc] Assuming drive cache: write through
    [ 2.270838] sd 4:0:0:0: [sdc] No Caching mode page found
    [ 2.270891] sd 4:0:0:0: [sdc] Assuming drive cache: write through
    [ 2.271726] sdc: sdc1 sdc2
    [ 2.275974] sd 4:0:0:0: [sdc] No Caching mode page found
    [ 2.276035] sd 4:0:0:0: [sdc] Assuming drive cache: write through
    [ 2.276094] sd 4:0:0:0: [sdc] Attached SCSI removable disk
    [ 2.446613] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.458243] usbcore: registered new interface driver usbhid
    [ 2.458250] usbhid: USB HID core driver
    [ 2.459628] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.1/usb2/2-2/2-2:1.0/0003:046D:C00C.0001/input/input1
    [ 2.460237] hid-generic 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.1-2/input0
    [ 2.465896] Switched to clocksource tsc
    [ 2.514535] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.540869] scsi 5:0:0:0: Direct-Access Hama FlashPen 1.04 PQ: 0 ANSI: 0 CCS
    [ 2.541837] sd 5:0:0:0: [sdd] 1003520 512-byte logical blocks: (513 MB/490 MiB)
    [ 2.542457] sd 5:0:0:0: [sdd] Write Protect is off
    [ 2.542461] sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00
    [ 2.543083] sd 5:0:0:0: [sdd] No Caching mode page found
    [ 2.543138] sd 5:0:0:0: [sdd] Assuming drive cache: write through
    [ 2.546081] sd 5:0:0:0: [sdd] No Caching mode page found
    [ 2.546131] sd 5:0:0:0: [sdd] Assuming drive cache: write through
    [ 2.546968] sdd:
    [ 2.549206] sd 5:0:0:0: [sdd] No Caching mode page found
    [ 2.549255] sd 5:0:0:0: [sdd] Assuming drive cache: write through
    [ 2.549305] sd 5:0:0:0: [sdd] Attached SCSI removable disk
    [ 3.215911] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
    [ 3.216179] systemd[1]: Detected architecture 'x86-64'.
    [ 3.233071] systemd[1]: Set hostname to <db1arch>.
    [ 4.451586] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 4.452340] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 4.452470] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 4.452530] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 4.453076] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 4.453109] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 4.453152] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 4.453167] systemd[1]: Starting Paths.
    [ 4.453440] systemd[1]: Reached target Paths.
    [ 4.453453] systemd[1]: Starting Encrypted Volumes.
    [ 4.453723] systemd[1]: Reached target Encrypted Volumes.
    [ 4.453743] systemd[1]: Expecting device dev-sda2.device...
    [ 4.453935] systemd[1]: Expecting device dev-disk-by\x2duuid-1be23119\x2d5515\x2d4480\x2da559\x2d696105f9cee4.device...
    [ 4.454136] systemd[1]: Expecting device dev-disk-by\x2duuid-385efd17\x2d3905\x2d4b8f\x2d8ec8\x2d9419a38cfcb0.device...
    [ 4.454332] systemd[1]: Starting Root Slice.
    [ 4.461699] systemd[1]: Created slice Root Slice.
    [ 4.461738] systemd[1]: Starting User and Session Slice.
    [ 4.462302] systemd[1]: Created slice User and Session Slice.
    [ 4.462320] systemd[1]: Starting Delayed Shutdown Socket.
    [ 4.462665] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 4.462683] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 4.462993] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 4.463008] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 4.463307] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 4.463322] systemd[1]: Starting Journal Socket (/dev/log).
    [ 4.463621] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 4.463637] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 4.463929] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 4.463954] systemd[1]: Starting udev Control Socket.
    [ 4.464241] systemd[1]: Listening on udev Control Socket.
    [ 4.464259] systemd[1]: Starting udev Kernel Socket.
    [ 4.464547] systemd[1]: Listening on udev Kernel Socket.
    [ 4.464579] systemd[1]: Starting Journal Socket.
    [ 4.464874] systemd[1]: Listening on Journal Socket.
    [ 4.464930] systemd[1]: Starting System Slice.
    [ 4.465527] systemd[1]: Created slice System Slice.
    [ 4.465560] systemd[1]: Started File System Check on Root Device.
    [ 4.465574] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 4.466125] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 4.475871] systemd[1]: Mounting Temporary Directory...
    [ 4.486514] systemd[1]: Starting system-getty.slice.
    [ 4.487508] systemd[1]: Created slice system-getty.slice.
    [ 4.487590] systemd[1]: Mounting Huge Pages File System...
    [ 4.488820] systemd[1]: Starting udev Coldplug all Devices...
    [ 4.491503] systemd[1]: Starting Setup Virtual Console...
    [ 4.494613] systemd[1]: Mounting Debug File System...
    [ 4.497220] systemd[1]: Mounting POSIX Message Queue File System...
    [ 4.557484] systemd[1]: Starting Set Up Additional Binary Formats...
    [ 4.640820] systemd[1]: Started Load Kernel Modules.
    [ 4.640879] systemd[1]: Starting Apply Kernel Variables...
    [ 4.642456] systemd[1]: Mounting Configuration File System...
    [ 4.643981] systemd[1]: Mounted FUSE Control File System.
    [ 4.864249] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 4.865740] systemd[1]: Starting Journal Service...
    [ 4.867779] systemd[1]: Started Journal Service.
    [ 5.312956] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 5.624022] systemd-udevd[140]: starting version 216
    [ 6.289020] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 6.289034] ACPI: Power Button [PWRB]
    [ 6.289120] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 6.289123] ACPI: Power Button [PWRF]
    [ 6.352568] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
    [ 6.352584] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
    [ 6.352594] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
    [ 6.368450] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [ 6.486856] parport_pc 00:05: reported by Plug and Play ACPI
    [ 6.486927] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
    [ 6.587129] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 904kHz
    [ 6.688852] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    [ 6.689198] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
    [ 6.728214] random: nonblocking pool is initialized
    [ 6.988022] mousedev: PS/2 mouse device common for all mice
    [ 7.210562] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:11:d8:00:96:f1
    [ 7.210572] forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2
    [ 7.210685] ACPI Warning: SystemIO range 0x0000000000005000-0x000000000000503f conflicts with OpRegion 0x0000000000005000-0x0000000000005004 (\_SB_.PCI0.SMBS.SMRG) (20131218/utaddress-258)
    [ 7.210694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.210750] i2c i2c-0: nForce2 SMBus adapter at 0x5040
    [ 7.210837] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 7.304777] MCE: In-kernel MCE decoding enabled.
    [ 7.310354] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
    [ 7.310416] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
    [ 7.388088] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
    [ 7.482978] ppdev: user-space parallel port driver
    [ 7.492121] EDAC MC: Ver: 3.0.0
    [ 7.682441] AMD64 EDAC driver v3.4.0
    [ 7.720053] intel8x0_measure_ac97_clock: measured 50279 usecs (2472 samples)
    [ 7.720064] intel8x0: clocking to 46862
    [ 7.720952] EDAC amd64: DRAM ECC enabled.
    [ 7.720961] EDAC amd64: K8 revE or earlier detected (node 0).
    [ 7.721024] EDAC amd64: CS0: Double data rate SDRAM
    [ 7.721026] EDAC amd64: CS1: Double data rate SDRAM
    [ 7.721028] EDAC amd64: CS2: Double data rate SDRAM
    [ 7.721029] EDAC amd64: CS3: Double data rate SDRAM
    [ 7.721031] EDAC amd64: CS4: Double data rate SDRAM
    [ 7.721032] EDAC amd64: CS5: Double data rate SDRAM
    [ 7.721371] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
    [ 7.721411] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
    [ 7.819219] systemd-udevd[148]: renamed network interface eth0 to enp0s5
    [ 8.800850] nvidia: module license 'NVIDIA' taints kernel.
    [ 8.800863] Disabling lock debugging due to kernel taint
    [ 8.878778] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 18
    [ 8.878854] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 8.879632] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.123 Wed Jul 2 10:59:22 PDT 2014
    [ 9.251351] Adding 2137224k swap on /dev/sda2. Priority:-1 extents:1 across:2137224k FS
    [ 9.501409] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 10.518296] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 10.788573] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [ 11.527802] systemd-journald[119]: Received request to flush runtime journal from PID 1
    glxinfo | grep OpenGL
    OpenGL vendor string: NVIDIA Corporation
    OpenGL renderer string: GeForce 7600 GT/AGP/SSE2
    OpenGL version string: 2.1.2 NVIDIA 304.123
    OpenGL shading language version string: 1.20 NVIDIA via Cg compiler
    OpenGL extensions:
    OpenGL ES profile version string: OpenGL ES 2.0 NVIDIA 304.123 304.123
    OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.00
    OpenGL ES profile extensions:
    lspci -v
    00:00.0 Host bridge: NVIDIA Corporation nForce3 250Gb Host Bridge (rev a1)
    Subsystem: ASUSTeK Computer Inc. K8N-E
    Flags: bus master, 66MHz, fast devsel, latency 0
    Memory at e0000000 (32-bit, prefetchable) [size=256M]
    Capabilities: [44] HyperTransport: Slave or Primary Interface
    Capabilities: [c0] AGP version 3.0
    Kernel driver in use: agpgart-amd64
    Kernel modules: amd64_agp
    00:01.0 ISA bridge: NVIDIA Corporation nForce3 250Gb LPC Bridge (rev a2)
    Subsystem: ASUSTeK Computer Inc. K8N-E
    Flags: bus master, 66MHz, fast devsel, latency 0
    00:01.1 SMBus: NVIDIA Corporation nForce 250Gb PCI System Management (rev a1)
    Subsystem: ASUSTeK Computer Inc. K8N-E
    Flags: 66MHz, fast devsel
    I/O ports at 5080 [size=32]
    I/O ports at 5000 [size=64]
    I/O ports at 5040 [size=64]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: nForce2_smbus
    Kernel modules: i2c_nforce2
    00:02.0 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
    Subsystem: ASUSTeK Computer Inc. K8N-E
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
    Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: ohci-pci
    Kernel modules: ohci_pci
    00:02.1 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
    Subsystem: ASUSTeK Computer Inc. K8N-E
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
    Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: ohci-pci
    Kernel modules: ohci_pci
    00:02.2 USB controller: NVIDIA Corporation nForce3 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI])
    Subsystem: ASUSTeK Computer Inc. K8N-E
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
    Memory at febffc00 (32-bit, non-prefetchable) [size=256]
    Capabilities: [44] Debug port: BAR=1 offset=0098
    Capabilities: [80] Power Management version 2
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci
    00:05.0 Bridge: NVIDIA Corporation CK8S Ethernet Controller (rev a2)
    Subsystem: ASUSTeK Computer Inc. K8N-E
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
    Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
    I/O ports at ec00 [size=8]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: forcedeth
    Kernel modules: forcedeth
    00:06.0 Multimedia audio controller: NVIDIA Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
    Subsystem: ASUSTeK Computer Inc. Device 812a
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
    I/O ports at e800 [size=256]
    I/O ports at e400 [size=128]
    Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: snd_intel8x0
    Kernel modules: snd_intel8x0
    00:08.0 IDE interface: NVIDIA Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
    Subsystem: ASUSTeK Computer Inc. K8N-E
    Flags: bus master, 66MHz, fast devsel, latency 0
    [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
    [virtual] Memory at 000003f0 (type 3, non-prefetchable)
    [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
    [virtual] Memory at 00000370 (type 3, non-prefetchable)
    I/O ports at ffa0 [size=16]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: pata_amd
    Kernel modules: pata_amd, pata_acpi, ata_generic
    00:0a.0 IDE interface: NVIDIA Corporation nForce3 Serial ATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
    Subsystem: ASUSTeK Computer Inc. K8N-E
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
    I/O ports at 09f0 [size=8]
    I/O ports at 0bf0 [size=4]
    I/O ports at 0970 [size=8]
    I/O ports at 0b70 [size=4]
    I/O ports at c800 [size=16]
    I/O ports at c400 [size=128]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: sata_nv
    Kernel modules: sata_nv, pata_acpi, ata_generic
    00:0b.0 PCI bridge: NVIDIA Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) (prog-if 00 [Normal decode])
    Flags: bus master, 66MHz, medium devsel, latency 16
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
    Memory behind bridge: fa900000-fe9fffff
    Prefetchable memory behind bridge: ba800000-da7fffff
    Kernel modules: shpchp
    00:0e.0 PCI bridge: NVIDIA Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) (prog-if 00 [Normal decode])
    Flags: bus master, 66MHz, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: fea00000-feafffff
    Kernel modules: shpchp
    00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    Flags: fast devsel
    Capabilities: [80] HyperTransport: Host or Secondary Interface
    00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
    Flags: fast devsel
    00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
    Flags: fast devsel
    Kernel driver in use: amd64_edac
    Kernel modules: amd64_edac_mod
    00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    Flags: fast devsel
    Kernel driver in use: k8temp
    Kernel modules: k8temp
    01:00.0 VGA compatible controller: NVIDIA Corporation G73 [GeForce 7600 GT] (rev a2) (prog-if 00 [VGA controller])
    Subsystem: CardExpert Technology Device 0401
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
    Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
    Memory at c0000000 (32-bit, prefetchable) [size=256M]
    Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
    Expansion ROM at fe9e0000 [disabled] [size=128K]
    Capabilities: [60] Power Management version 2
    Capabilities: [44] AGP version 3.0
    Kernel driver in use: nvidia
    Kernel modules: nouveau, nvidia
    02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 80) (prog-if 10 [OHCI])
    Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard
    Flags: bus master, medium devsel, latency 64, IRQ 19
    Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
    I/O ports at bc00 [size=128]
    Capabilities: [50] Power Management version 2
    Kernel driver in use: firewire_ohci
    Kernel modules: firewire_ohci
    running browsers from a uterm shows only these console messages (nothing else):
    firefox http://dennisbusch.de/software/refugeel … _rlGL.html
    (process:489): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
    google-chrome-stable http://dennisbusch.de/software/refugeel … _rlGL.html
    NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
    NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
    google-chrome-stable --ignore-gpu-blacklist http://dennisbusch.de/software/refugeel … _rlGL.html
    NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
    NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
    chromium shows the same messages as google-chrome-stable does.
    stat /dev/nvidia0
    File: /dev/nvidia0
    Size: 0 Blocks: 0 IO Block: 4096 character special file
    Device: 5h/5d Inode: 10741 Links: 1 Device type: c3,0
    Access: (0666/crw-rw-rw-) Uid: ( 0/ root) Gid: ( 0/ root)
    Access: 2014-11-06 15:42:55.105702689 +0100
    Modify: 2014-11-06 15:42:55.105702689 +0100
    Change: 2014-11-06 15:42:55.105702689 +0100
    Birth: -
    That's all I know. Any ideas?

    Still trying...but pretty much stumbling around in the dark here.
    cat /proc/driver/nvidia/agp/host-bridge
    Host Bridge:      PCI device 10de:00e1
    Fast Writes:      Supported
    SBA:          Supported
    AGP Rates:      8x 4x
    Registers:      0x1f00421b:0x00000312
    cat /proc/driver/nvidia/agp/gpu
    Fast Writes:      Supported
    SBA:          Supported
    AGP Rates:      8x 4x
    Registers:      0xff000e1b:0x1f004312
    cat /proc/driver/nvidia/agp/status
    Status:      Enabled
    Driver:      AGPGART
    AGP Rate:      8x
    Fast Writes:      Disabled
    SBA:          Enabled
    Digging around the web I found how to enable fastwrites and did so by
    creating a file /etc/modprobe.d/nvidia.conf
    with this content:
    options nvidia NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1
    after reboot, startx
    cat /proc/driver/nvidia/agp/status
    Status:      Enabled
    Driver:      AGPGART
    AGP Rate:      8x
    Fast Writes:      Enabled
    SBA:          Enabled
    The problem of sluggish webgl performance persists though and the
    browsers as described in the OP are still giving the same messages.
    Here is some more data, maybe it's relevant...
    cat /proc/driver/nvidia/params
    EnableVia4x: 0
    EnableALiAGP: 0
    NvAGP: 3
    ReqAGPRate: 15
    EnableAGPSBA: 1
    EnableAGPFW: 1
    Mobile: 4294967295
    ResmanDebugLevel: 4294967295
    RmLogonRC: 1
    ModifyDeviceFiles: 1
    DeviceFileUID: 0
    DeviceFileGID: 0
    DeviceFileMode: 438
    RemapLimit: 0
    UpdateMemoryTypes: 4294967295
    InitializeSystemMemoryAllocations: 1
    UseVBios: 1
    RMEdgeIntrCheck: 1
    UsePageAttributeTable: 4294967295
    EnableMSI: 0
    MapRegistersEarly: 0
    RegisterForACPIEvents: 1
    RegistryDwords: ""
    RmMsg: ""

  • I am having problems downloading files from the web. After a number of files are downloaded, the system become sluggish, and then hangs. I traced the problem to the download history file: downloads.sqlite.

    After downloading a number of 1.0 MB files, the system became very sluggish, and I started to get lots of (Not Responding) messages when trying to download or just use Firefox for browsing. Using Performance Monitor, I observed that the Firefox executable was growing larger and larger - up to as large as 1.2 GB on a system with 2.0 GB memory. Page faults were off the chart.
    Looking for a similar problem, I found one that discussed the downloads.sqlite file becoming corrupted. I first noticed that this file was over 600 MB in size, so I deleted it. I then downloaded additional files, and observed that the new downloads.sqlite file would increase in size by about 150% of the size of each file that was downloaded. Once it would get up to 500 MB in size, the system started slowing down again.
    I don't know the purpose of this file, but it appears that it keeps a full copy of every file downloaded, which may be the function of a download history file, but it does not seem correct that the file should grow in size without limit, and thus impact the system.
    I would also appear that the Firefox executable is trying to read the entire contents of this file each time a new file is downloaded, which does not seem right.
    Temporary fix is to periodically delete the downloads.sqlite file when it gets too large and starts impacting performance.. Apparently it is smart enough to open a new file if the old one is not found. I am not sure what the correct behavior for this file should be. Apparently is does not re-initialize when a new Firefox session is initiated.
    Please feel free to contact me if more information is desired. I'm not sure what details you might need to troubleshoot this type of problem.

    Hi Katy, and a warm welcome to the forums!
    What is the exact name of the file?
    Is it aim.bin?
    Which requires either Stuffit Expander, or the Unarchiver to deflate.
    http://www.apple.com/downloads/macosx/systemdiskutilities/theunarchiver.html

  • Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8!  Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all.  Doesn't happen each time I attempt to shutdow

    Can't access the "Apple" icon in upper main menu to shutdown my MacBook Pro running 10.6.8!  Also can't open a new finder window and main menus such as File and Edit are sluggish to open or don't open at all.  Doesn't happen each time I attempt to shutdowCan't

    There are some keyboard commands (shortcuts) you can use instead of having to go to the Apple menu -
    Control-Eject          This brings up the Restart-Sleep-Cancel-Shutdown window.
    Command-Option-Eject          This puts the machine to sleep.
    Command-Control-Eject          This closes all apps and restarts the machine.
    Command-Option-Control-Eject          This closes all apps and shuts the machine down.

  • IMac 5k Fullscreen Terminal/Opacity Slow & Sluggish

    Hi,
    i have a weird issue with my new iMac 5k that i have narrowed down specifically to the size of windows with opacity.
    The issue at first was not very clear, but at certain points when using my iMac 5k, the whole computer would get sluggish.  Memory usage was mimimal (its got 32gb ram) and so was CPU usage (top i7), but things like new browser tabs, switching between finder and another application just by clicking it in the background, mission control etc.  were all very slow in responding.  The issue would not go away until i restarted my computer.
    After a day of trying to investigate what was causing the issue, i managed to narrow it down to Terminal.  I have a home-brew theme with 90% opacity set, and i worked out that as soon as i resize the terminal window to fill at least 70% of the screen, the sluggish issue would start.  The problem is that even when i quit terminal it would continue.  The only fix would be a restart.
    I use terminal all the time, so the clear fix for the issue is to change to a theme without opacity (which i have done), but there must be some problem going on in the background if i can't have a basic window filling more than 70% of the screen with any sort of opacity.  I realise the 5k has to power a lot more pixels, but wanted to check that its not some other issue.
    Thanks
    Ali

    Applications on Retina display can be toggled to run in Low Resolution. Select the Terminal icon, open the get info panel and tick "Open in Low Resolution".

  • HT4922 Downloaded 5.1.1. to my iphone. Now, Safari will not connect to my server.  Can not download web pages and many of my apps. Running very slow sluggish! Is there a fix? Sound like other users are experiencing same problems.  Anyone have a solution?

    Downloaded 5.1.1 to my iphone. Now, Safari will not connect to my server. Can not download web pages and many of my apps. Email seems to be ok. iphone running slow and sluggish.  I have read several other users have experienced the same problem. Any solutions?

    Basic troubleshooting steps oultlined in the User Guide are restart, reset, restore from backup, restore as new device.
    You need to go through all steps in succession until your problem is solved.  If going through ALL these steps fails to resolve your issue, then you'll need to bring your phone into Apple for evaluation and possible replacement.

  • IMac is very slow and sluggish, keeps churning when editing files or on internet

    My iMac is running slow and sluggish, it takes several minutes to edit a word document or search the internet ... intermittently it runs great but productivity is near zero when to edit a sentence in a Word document takes several minutes.  When typing an email the cursor stops and if you keep typing it eventually fills in what was typed even though you can't see it when typing. Ran Etrecheck ... report is attached.
    Problem description:
    iMac mid 2010 is running very slow … takes too long to edit documents and open internet sites … increased RAM a month ago from 4 to 12 GB
    EtreCheck version: 2.1.8 (121)
    Report generated March 6, 2015 at 8:25:35 AM CST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2010) (Technical Specifications)
        iMac - model: iMac11,3
        1 3.2 GHz Intel Core i3 CPU: 2-core
        12 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 5670 - VRAM: 512 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 3 days 23:34:34
    Disk Information: ℹ️
        ST31000528AS disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (636.35 GB free) - 523 errors
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        OPTIARC DVD RW AD-5680H 
    USB Information: ℹ️
        HP Officejet Pro 8500 A910
        Apple, Inc. Keyboard Hub
            Apple, Inc Apple Keyboard
        Apple Computer, Inc. IR Receiver
        Apple Inc. Built-in iSight
        Hewlett-Packard HP LaserJet Professional P1606dn
        Neat NeatConnect Scanner
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.marvell.kext.USBGenericPrinterClass (1.0.0) [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.carbonite.launchd.carbonitealerts.plist [Click for support]
        [running]    com.carbonite.launchd.carbonitestatus.plist [Click for support]
        [running]    com.citrixonline.GoToMyPC.LaunchAgent.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.carbonite.launchd.carbonitedaemon.plist [Click for support]
        [running]    com.citrixonline.GoToMyPC.CommAgent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [loaded]    com.roamingclient.cell.mac.tm.roamingclient.plist [Click for support]
        [running]    com.tmobile-rocket20.zerocd.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support] [Click for details]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.hp.printerAgent.plist [Click for support]
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 7 Update 51 Check version
        FlashPlayerDebugger-10.6: Version: 11.2.202.235 [Click for support]
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        Flash Player: Version: 11.2.202.235 Outdated! Update
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Click for support]
        DirectorShockwave: Version: 11.5.9r620 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    3rd Party Preference Panes: ℹ️
        Carbonite  [Click for support]
        Flash Player  [Click for support]
        GoToMyPC Preferences  [Click for support]
        Growl  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 363.00 GB
        Destinations:
            Taylor Technology Time Caps [Network]
            Total size: 2.00 TB
            Total number of backups: 91
            Oldest backup: 2014-01-13 06:38:23 +0000
            Last backup: 2015-03-06 14:07:22 +0000
            Size of backup disk: Adequate
                Backup size 2.00 TB > (Disk used 363.00 GB X 3)
    Top Processes by CPU: ℹ️
            81%    CarboniteDaemon
             4%    WindowServer
             3%    Neat
             1%    HP Scanner 3
             0%    Microsoft Word
    Top Processes by Memory: ℹ️
        3.05 GB    Neat
        1.46 GB    CarboniteDaemon
        232 MB    Microsoft Word
        232 MB    Finder
        219 MB    WindowServer
    Virtual Memory Information: ℹ️
        327 MB    Free RAM
        4.78 GB    Active RAM
        4.18 GB    Inactive RAM
        1.15 GB    Wired RAM
        125.62 GB    Page-ins
        298 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 12, 2015, 10:18:58 AM    /Library/Logs/DiagnosticReports/Kernel_2015-02-12-101858_[redacted].panic [Click for details]

    Matt ... got it done, recovery repair said Hard Drive OK.  Re-ran EtreCheck report attached ... still having the same issues.  Everything is fully backed up to Carbonite and Time Machine ... let me know if you see other conflicts or if it is the hard drive I will work to get it repaired.
    Thanks.
    EtreCheck version: 2.1.8 (121)
    Report generated March 6, 2015 at 9:28:28 AM CST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2010) (Technical Specifications)
        iMac - model: iMac11,3
        1 3.2 GHz Intel Core i3 CPU: 2-core
        12 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 5670 - VRAM: 512 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:2:41
    Disk Information: ℹ️
        ST31000528AS disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (643.46 GB free) - 21 errors
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        OPTIARC DVD RW AD-5680H 
    USB Information: ℹ️
        HP Officejet Pro 8500 A910
        Apple, Inc. Keyboard Hub
            Apple Inc. iPhone
            Apple, Inc Apple Keyboard
        Apple Inc. Built-in iSight
        Apple Computer, Inc. IR Receiver
        Hewlett-Packard HP LaserJet Professional P1606dn
        Neat NeatConnect Scanner
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.marvell.kext.USBGenericPrinterClass (1.0.0) [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.carbonite.launchd.carbonitealerts.plist [Click for support]
        [running]    com.carbonite.launchd.carbonitestatus.plist [Click for support]
        [running]    com.citrixonline.GoToMyPC.LaunchAgent.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.carbonite.launchd.carbonitedaemon.plist [Click for support]
        [running]    com.citrixonline.GoToMyPC.CommAgent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [loaded]    com.roamingclient.cell.mac.tm.roamingclient.plist [Click for support]
        [running]    com.tmobile-rocket20.zerocd.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.hp.printerAgent.plist [Click for support]
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 7 Update 51 Check version
        FlashPlayerDebugger-10.6: Version: 11.2.202.235 [Click for support]
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        Flash Player: Version: 11.2.202.235 Outdated! Update
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Click for support]
        DirectorShockwave: Version: 11.5.9r620 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    3rd Party Preference Panes: ℹ️
        Carbonite  [Click for support]
        Flash Player  [Click for support]
        GoToMyPC Preferences  [Click for support]
        Growl  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 355.88 GB
        Destinations:
            Taylor Technology Time Caps [Network]
            Total size: 2.00 TB
            Total number of backups: 91
            Oldest backup: 2014-01-13 06:38:23 +0000
            Last backup: 2015-03-06 14:07:22 +0000
            Size of backup disk: Adequate
                Backup size 2.00 TB > (Disk used 355.88 GB X 3)
    Top Processes by CPU: ℹ️
            25%    CarboniteDaemon
             3%    WindowServer
             2%    systemstatsd
             1%    launchd
             0%    HP Scanner 3
    Top Processes by Memory: ℹ️
        129 MB    CarboniteDaemon
        103 MB    ocspd
        77 MB    Safari
        52 MB    Dock
        39 MB    mds_stores
    Virtual Memory Information: ℹ️
        9.94 GB    Free RAM
        1.48 GB    Active RAM
        539 MB    Inactive RAM
        922 MB    Wired RAM
        1.01 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 6, 2015, 09:24:22 AM    Self test - passed
        Feb 12, 2015, 10:18:58 AM    /Library/Logs/DiagnosticReports/Kernel_2015-02-12-101858_[redacted].panic [Click for details]

  • IMac running Mavericks 10.9.5; very slow, sluggish, apps freeze, mail is almost useless (gmail imap).  Here are the results from etrecheck:EtreCheck version: 1.9.15 (52) Report generated October 7, 2014 at 1:12:49 PM PDT  Hardwa

    My iMac has been sluggish for a long time; finally got around to posting here for help!
    I've tried using Onyx to clean it up and it helped a little, but it seems as if everything freezes up and forget about mail; I use apple mail with gmail (google docs) and it is constantly indexing, etc. I need to use the web browser to answer email and it's just not what I want from apple.
    Please help!
    Thanks
    Here is the EtreCheck results:
    EtreCheck version: 1.9.15 (52)
    Report generated October 7, 2014 at 1:12:49 PM PDT
    Hardware Information: ?
      iMac (27-inch, Mid 2011) (Verified)
      iMac - model: iMac12,2
      1 2.7 GHz Intel Core i5 CPU: 4 cores
      4 GB RAM
    Video Information: ?
      AMD Radeon HD 6770M - VRAM: 512 MB
      iMac 2560 x 1440
    System Software: ?
      OS X 10.9.5 (13F34) - Uptime: 0 days 0:38:12
    Disk Information: ?
      ST31000528AS disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 999.35 GB (739.18 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      HL-DT-STDVDRW  GA32N 
    USB Information: ?
      Western Digital My Passport 07B8 1 TB
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted>: 209.7 MB
      My Passport for Mac (disk1s2) /Volumes/My Passport for Mac: 999.83 GB (663.13 GB free)
      Apple Computer, Inc. IR Receiver
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.leapfrog.driver.LfConnectDriver (1.0.1) Support
      [not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
      [not loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) Support
      [not loaded] com.wdc.driver.IOFireWireWDHID (1.1.2) Support
      [loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) Support
    Startup Items: ?
      EasyProject: Path: /Library/StartupItems/EasyProject
      Parallels: Path: /Library/StartupItems/Parallels
      RetroRun: Path: /Library/StartupItems/RetroRun
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.xackup.insync.ipcfsevents.plist Support
    Launch Agents: ?
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.hp.help.tocgenerator.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.divx.agent.postinstall.plist Support
      [loaded] com.marketcircle.daylite.dlbackuppersonal.plist Support
      [not loaded] com.spotify.webhelper.plist Support
    User Login Items: ?
      AirPort Base Station Agent
      Dropbox
      WDDriveUtilityHelper
      WDSecurityHelper
    Internet Plug-ins: ?
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      Google Earth Web Plug-in: Version: 6.0 Support
      Default Browser: Version: 537 - SDK 10.9
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      AdobePDFViewerNPAPI: Version: 10.1.12 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      AdobePDFViewer: Version: 10.1.12 Support
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      DirectorShockwave: Version: 12.1.1r151 - SDK 10.6 Support
    Safari Extensions: ?
      YouTube5
      TrueNew(TM) Count for Gmail and Google Apps
      1-ClickWeather-1
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins ?
      WebEx64: Version: 1.0 Support
      Picasa: Version: 1.0 Support
      WebEx: Version: 1.0 Support
    3rd Party Preference Panes: ?
      Déjà Vu  Support
      Flash Player  Support
      Growl  Support
      Perian  Support
    Time Machine: ?
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 930.71 GB Disk used: 242.30 GB
      Destinations:
      Time Machine Backups [Local]
      Total size: 0 B
      Total number of backups: (null)
      Size of backup disk: Too small
      Backup size 0 B < (Disk used 242.30 GB X 3)
      My Passport for Mac [Local] (Last used)
      Total size: 931.16 GB
      Total number of backups: 68
      Oldest backup: 2014-04-18 01:53:32 +0000
      Last backup: 2014-10-07 19:02:03 +0000
      Size of backup disk: Adequate
      Backup size 931.16 GB > (Disk used 242.30 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          3% WindowServer
          3% Mail
          1% mds_stores
          1% ocspd
          0% Google Chrome
    Top Processes by Memory: ?
      184 MB Finder
      102 MB Safari
      98 MB Mail
      78 MB Google Chrome
      70 MB mds_stores
    Virtual Memory Information: ?
      46 MB Free RAM
      1.29 GB Active RAM
      1.26 GB Inactive RAM
      871 MB Wired RAM
      976 MB Page-ins
      35 MB Page-outs

    Thanks; this is from the all messages window:
    10/7/14 1:11:41.714 PM quicklookd[449]: objc[449]: Class TSUMutableNumberFormat is implemented in both /Library/QuickLook/iWork.qlgenerator/Contents/MacOS/iWork and /System/Library/PrivateFrameworks/OfficeImport.framework/Versions/A/OfficeImpor t. One of the two will be used. Which one is undefined.
    10/7/14 1:11:41.714 PM quicklookd[449]: objc[449]: Class TSDBezierPath is implemented in both /Library/QuickLook/iWork.qlgenerator/Contents/MacOS/iWork and /System/Library/PrivateFrameworks/OfficeImport.framework/Versions/A/OfficeImpor t. One of the two will be used. Which one is undefined.
    10/7/14 1:11:41.714 PM quicklookd[449]: objc[449]: Class TSUBundleLookupClass is implemented in both /Library/QuickLook/iWork.qlgenerator/Contents/MacOS/iWork and /System/Library/PrivateFrameworks/OfficeImport.framework/Versions/A/OfficeImpor t. One of the two will be used. Which one is undefined.
    10/7/14 1:11:48.904 PM com.apple.IconServicesAgent[231]: main Failed to composit image for binding VariantBinding [0x339] flags: 0x8 binding: FileInfoBinding [0x155] - extension: wav, UTI: com.microsoft.waveform-audio, fileType: ????.
    10/7/14 1:11:48.904 PM quicklookd[449]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x803] flags: 0x8 binding: FileInfoBinding [0x703] - extension: wav, UTI: com.microsoft.waveform-audio, fileType: ???? request size:16 scale: 1
    10/7/14 1:11:59.194 PM WindowServer[92]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    10/7/14 1:12:01.359 PM WindowServer[92]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 3.17 seconds (server forcibly re-enabled them after 1.00 seconds)
    10/7/14 1:12:06.876 PM com.apple.IconServicesAgent[231]: main Failed to composit image for binding VariantBinding [0x367] flags: 0x8 binding: FileInfoBinding [0x183] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: ????.
    10/7/14 1:12:06.930 PM quicklookd[465]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: ???? request size:91 scale: 1
    10/7/14 1:12:31.844 PM com.apple.SecurityServer[26]: Session 100018 created
    10/7/14 1:12:33.249 PM com.apple.SecurityServer[26]: Killing auth hosts
    10/7/14 1:12:33.249 PM com.apple.SecurityServer[26]: Session 100017 destroyed
    10/7/14 1:13:46.332 PM osascript[525]: Performance: Please update this scripting addition to supply a value for ThreadSafe for each event handler: "/Library/ScriptingAdditions/Insync.osax"
    10/7/14 1:13:50.487 PM System Events[526]: .sdef warning for part of complex type 'any | number | boolean | date | list | record | text | data' used in suite 'Property List Suite': 'data' is not a valid type name.
    10/7/14 1:13:50.488 PM System Events[526]: .sdef warning for type 'text | missing value | any' attribute 'uniqueID' of class 'XML element' in suite 'XML Suite': AppleScript ID references may not work for this property because its type is not NSNumber- or NSString-derived.
    10/7/14 1:22:26.914 PM apsd[61]: Unrecognized leaf certificate
    10/7/14 1:22:30.000 PM kernel[0]: process Google Chrome[362] caught causing excessive wakeups. Observed wakeups rate (per sec): 155; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 149576
    10/7/14 1:22:30.733 PM ReportCrash[563]: Invoking spindump for pid=362 wakeups_rate=155 duration=291 because of excessive wakeups
    10/7/14 1:22:31.519 PM com.apple.SecurityServer[26]: Session 100019 created
    10/7/14 1:22:47.793 PM spindump[564]: Saved wakeups_resource.spin report for Google Chrome version 37.0.2062.124 (2062.124) to /Library/Logs/DiagnosticReports/Google Chrome_2014-10-07-132247_Alans-iMac.wakeups_resource.spin
    10/7/14 1:24:07.367 PM com.apple.SecurityServer[26]: Session 100020 created
    10/7/14 1:24:20.214 PM xpcproxy[573]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    10/7/14 1:27:12.943 PM CalendarAgent[198]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=503 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 503.)" UserInfo=0x7f8c324589f0 Account name .. , CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7f8c3240aec0 [0x7fff76463f00]>{type = immutable dict, count = 12,
    entries =>
      0 : Content-Type = <CFString 0x7f8c326fab50 [0x7fff76463f00]>{contents = "application/vnd.google.gdata.error+xml; charset=UTF-8"}
      4 : Alternate-Protocol = <CFString 0x7f8c3261ea70 [0x7fff76463f00]>{contents = "443:quic,p=0.01"}
      5 : Content-Encoding = <CFString 0x7f8c326ef9b0 [0x7fff76463f00]>{contents = "gzip"}
      6 : Server = <CFString 0x7f8c326edbe0 [0x7fff76463f00]>{contents = "GSE"}
      7 : X-XSS-Protection = <CFString 0x7f8c326d3bf0 [0x7fff76463f00]>{contents = "1; mode=block"}
      8 : Expires = <CFString 0x7f8c326de6a0 [0x7fff76463f00]>{contents = "Tue, 07 Oct 2014 20:27:12 GMT"}
      9 : Transfer-Encoding = <CFString 0x7fff7694eea0 [0x7fff76463f00]>{contents = "Identity"}
      12 : Cache-Control = <CFString 0x7f8c326e99c0 [0x7fff76463f00]>{contents = "private, max-age=0"}
      13 : Date = <CFString 0x7f8c326da3c0 [0x7fff76463f00]>{contents = "Tue, 07 Oct 2014 20:27:12 GMT"}
      19 : X-Content-Type-Options = <CFString 0x7f8c32613d90 [0x7fff76463f00]>{contents = "nosniff"}
      21 : X-Frame-Options = <CFString 0x7f8c326b7ab0 [0x7fff76463f00]>{contents = "SAMEORIGIN"}
      22 : Vary = <CFString 0x7f8c326f2d00 [0x7fff76463f00]>{contents = "Origin, Referer, X-Origin"}
    10/7/14 1:32:33.126 PM com.apple.backupd[583]: Starting automatic backup
    10/7/14 1:32:33.128 PM com.apple.backupd[583]: Destination Time Machine Backups could not be found (url: (null) destinationID: 1A41CF64-9EB9-4452-9C68-7FD1D4AA0CDC)
    10/7/14 1:32:33.129 PM com.apple.backupd[583]: Backup failed with error 18: The backup disk could not be found.
    10/7/14 1:32:33.201 PM com.apple.backupd[583]: Starting automatic backup
    10/7/14 1:32:40.102 PM com.apple.backupd[583]: Backing up to /dev/disk1s2: /Volumes/My Passport for Mac/Backups.backupdb
    10/7/14 1:32:53.542 PM com.apple.backupd[583]: Will copy (34.7 MB) from Macintosh HD
    10/7/14 1:32:53.589 PM com.apple.backupd[583]: Found 833 files (37.6 MB) needing backup
    10/7/14 1:32:53.604 PM com.apple.backupd[583]: 3.5 GB required (including padding), 663.13 GB available
    10/7/14 1:34:34.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=603[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
    10/7/14 1:34:51.449 PM com.apple.backupd[583]: Copied 1017 items (37.5 MB) from volume Macintosh HD. Linked 7495.
    10/7/14 1:34:54.765 PM com.apple.backupd[583]: Will copy (124 KB) from Macintosh HD
    10/7/14 1:34:54.766 PM com.apple.backupd[583]: Found 32 files (124 KB) needing backup
    10/7/14 1:34:54.766 PM com.apple.backupd[583]: 3.46 GB required (including padding), 663.09 GB available
    10/7/14 1:34:58.371 PM com.apple.backupd[583]: Copied 65 items (125 KB) from volume Macintosh HD. Linked 764.
    10/7/14 1:34:59.804 PM com.apple.backupd[583]: Created new backup: 2014-10-07-133459
    10/7/14 1:35:02.966 PM com.apple.backupd[583]: Starting post-backup thinning
    10/7/14 1:35:21.833 PM com.apple.backupd[583]: Deleted /Volumes/My Passport for Mac/Backups.backupdb/Alan’s iMac/2014-10-06-125056 (14.5 MB)
    10/7/14 1:35:21.833 PM com.apple.backupd[583]: Post-backup thinning complete: 1 expired backups removed
    10/7/14 1:35:21.870 PM com.apple.backupd[583]: Backup completed successfully.
    10/7/14 1:37:47.508 PM apsd[61]: Unrecognized leaf certificate
    10/7/14 1:42:13.237 PM xpcproxy[615]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    10/7/14 1:53:08.205 PM apsd[61]: Unrecognized leaf certificate
    10/7/14 1:58:39.689 PM Console[636]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
    10/7/14 1:58:41.770 PM WindowServer[92]: disable_update_timeout: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
    10/7/14 1:58:42.523 PM WindowServer[92]: common_reenable_update: UI updates were finally reenabled by application "Console" after 1.75 seconds (server forcibly re-enabled them after 1.00 seconds)
    10/7/14 2:08:28.567 PM apsd[61]: Unrecognized leaf certificate
    10/7/14 2:09:59.519 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.CD6ADA0B-2717-4CE5-A7A8-24BAC0018D97[306]) Exited with code: 1
    10/7/14 2:09:59.519 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.705EC731-1E84-4809-B639-AAB0195B51A5[305]) Exited with code: 1

  • I upgraded to iOS 6.1.2 and now my iPad is sluggish and will not play music from iTunes

    Need assistance with recent upgrade.  I installed 6.1.2 and now my iPad is sluggish and will not play music from iTunes.

    1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down until you see the Apple Logo.

Maybe you are looking for

  • How can I get an external microphone to work on an iphone?

    How can I get an external microphone to work on an iphone?

  • Multiple pane level

    I am referring the Complex Form from the sample.How can I set both the pane levels to Folder 1 and Folder 2 respectively ? If we refer the Item Master form,the folder General is different from Purchasing data.All the folders are diffrent from each ot

  • Drill down Report with Prompts

    I need to create a simple dashboard report in OBIEE analytics, which takes user inputs ( prompts )  for a YEAR , STATE ( & hierarchy) and displays Population State Hierarchy is ---> State -- City --Zip code Format of report is simple User Input    (

  • If the ipod says disabled connect to itunes what do I do?

    My daughter's ipod says it is disabled and to connect to itunes. what do I do?

  • Since updating unable to sort headers

    I updated my ipod to OS5 and with a zillion syncing issues I now cannot sort headers in My itouch, music.  I like to sort by artist etc but now can only do that in my main music library.  What the heck?  I also am having issues with syncing in genera