LR crashes related to the GPU + KB3048761 issue

Summary
========
There is the chance to have LR CC problems if you install the MS KB3048761 update
When LR has issues with the GPU, it doesn't warn you about that, it just crash! We need a better error handling and UX here!!
LR crashes when just disabling the GPU!! Same recommendation as above.
Detail
=====
When I started to use LR CC, it crashed (perpetually frozen) very often; in particular when entering into the developing mode. Also, I have a crash with PS CC, and it told me in a popup window it was because the GPU. So, I disabled the GPU in PS & LR CC and as result no more crashes!!
Then, I ran the Windows 7 (64-bit, SP1)  update panel and found out an nVidia update, and other one (KB3048761) related to memory-leak issues when multiple windows are open.
I installed both of them and started to have issues with LR CC temporarily frozen each few second of interaction. I had to switch to another application to go back to LR and have response form it. However, PS and all the other applications I use (Google Chorme, MS Office, etc.) were fine. Then, I de-installed the KB3048761 update, and the life was beautiful again.
I felt it was the moment to test the GPU, and enabled it in both LR and PS CC. LR still got frozen from time to time but not very often as before. However PS is fine all the time! I decided to disable again the GPU in LR CC, but it also gets frozen when I just try to disable the GPU!

Whatever the cause is, it will likely not fix itself, but continue to get worse over time. You could try running the extended version of the Apple Hardware Test to see if anything turns up.
Since you're under warranty, you might want to go ahead and report the problem to Apple and maybe get a case number. Very likely the problem will slowly get worse until it happens so frequently that it will predictably happen when the computer is started up. Apple would probably like to see the problem occur before doing a repair.
Of course if you get an error code from the AHT, you would have something concrete to report.
There have been some problems with the GeForce 8600M GT chipset specifically. You might want to check in the system profiler to see if you have this particular chipset.
It could also be a problem with your inverter board or possibly the cable.
Good luck!

Similar Messages

  • Firefox crashing---most likely related to the plugin container issue, but also unable to uninstall firefox, there is no prompt that opens when I try to.

    Like many others, I've been having issues with firefox since the update. The plugin container seems to crash my browser, or freeze the whole of my computer, and I must restart. I've switched to internet explorer for now.
    Moreover, now Firefox doesn't even seem to open now. I doubleclick on the icon, or try to launch the browser in any way, and it looks like it thinks about opening, but nothing ever occurs. I've watched my system processes, and firefox.exe appears for a moment, and then disappears, like its process has ended, but I've done nothing.
    Additionally, I can't even seem to uninstall firefox---the uninstall setup doesn't open, and trying to do it from add/remove programs on windows xp doesn't seem to work either.
    I also sometimes get an error that says windows can't find a file/path, related to a 'profile' but haven't had that for a day or so---since I can't even open firefox now.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Hello sprytely, go for a clean re-install, this means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from the next full installer https://www.mozilla.org/en-US/firefox/all/ and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b>Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Thank you.

  • Black screen issue - likely not related to the GPU, but i am concerned

    3 times in the last two weeks i've turned on my MBP, the startup screen lights up, the sound goes and it gets to the blue screen. all of a sudden the screen goes black, but i can still faintly see the desktop if i shine some light onto the screen. the first time it happened, i restarted and everything was fine. the second time it happened, i pressed the increase screen brightness key to see if anything would happen and the screen came back on (it went from the first notch to about half). the same thing happened the third time (which just happened about 10 minutes ago).
    anyone know why my screen brightness would randomly set itself to the lowest setting at start up? is this a sign of my GPU failing? is this a sign that my inverter board is dying?
    i have applecare, so i'm not worried about having to take it in for repair. i'm not entirely sure if there would be any way of reproducing it as it seems to happen randomly.

    Whatever the cause is, it will likely not fix itself, but continue to get worse over time. You could try running the extended version of the Apple Hardware Test to see if anything turns up.
    Since you're under warranty, you might want to go ahead and report the problem to Apple and maybe get a case number. Very likely the problem will slowly get worse until it happens so frequently that it will predictably happen when the computer is started up. Apple would probably like to see the problem occur before doing a repair.
    Of course if you get an error code from the AHT, you would have something concrete to report.
    There have been some problems with the GeForce 8600M GT chipset specifically. You might want to check in the system profiler to see if you have this particular chipset.
    It could also be a problem with your inverter board or possibly the cable.
    Good luck!

  • FAQ: What features use the GPU and how do I troubleshoot GPU issues?

    Photoshop CS6 GPU FAQ
    Introduction
    This document provides a quick reference guide to video card usage in Photoshop.  Some features require a compatible video card to work; if the video card or its driver is defective or unsupported, those features will not work at all.  Other features use the video card for acceleration and if the card or driver is defective those features will run more slowly.
    Mercury Graphics Engine
    The Mercury Graphics Engine (MGE) represents features that use video card, or GPU, acceleration. In Photoshop CS6, this new engine delivers near-instant results when editing with key tools such as Liquify, Warp, Lighting Effects and the Oil Paint filter. The new MGE delivers unprecedented responsiveness for a fluid feel as you work.
    MGE is new to Photoshop CS6, and uses both the OpenGL and OpenCL frameworks. It does not use the proprietary CUDA framework from nVidia.
    In order to use MGE, you must have a supported video card and updated driver. If you do not have a supported card, performance will be degraded. In most cases the acceleration is lost and the feature runs in the normal CPU mode. However, there are some features that will not work without a supported video card.
    GPU features added in Photoshop CS6
    Adaptive Wide Angle Filter (compatible video card required)
    Liquify (accelerated by compatible video card with 512MB VRAM, GPU mode unavailable on Windows XP)
    Oil Paint (compatible video card required)
    Warp and Puppet Warp (accelerated by compatible video card, GPU mode unavailable on Windows XP)
    Field Blur, Iris Blur, and Tilt/Shift (accelerated by compatible video
    card supporting OpenCL, GPU mode unavailable on Windows XP)
    Lighting Effects Gallery (compatible video card required with 512MB
    VRAM, unavailable on Windows XP)
    New 3D enhancements (3D features in Photoshop require a compatible video card with 512MB VRAM, unavailable on Windows XP):
    Draggable Shadows
    Ground plane reflections
    Roughness
    On-canvas UI controls
    Ground plane
    Liqht widgets on edge of canvas
    IBL (image based light) controller
    * Note that all 3D features are unavailable on Windows XP in Photoshop CS6
    GPU features added in previous versions of Photoshop
    Scrubby Zoom. See Zoom continuously
    Heads Up Display (HUD) color picker. See Choose a color while painting
    Color sampling ring. Choose colors with the Eyedropper tool
    Brush dynamic resize and hardness control. See Resize or change hardness of cursors by dragging
    Bristle Brush tip previews. Bristle tip shape options
    Rule of thirds crop grid overlay. Crop images
    Zoom enhancements. Smooth display at all zoom levels and temporary zoom. See Zoom continuouslyTemporarily zoom an image
    Animated transitions for one-stop zoom.
    Flick-panning.
    Rotate the canvas. Use the Rotate View tool
    View nonsquare pixel images. Adjust pixel aspect ratio
    Pixel grid. Hide the pixel grid
    Adobe Color Engine (ACE).
    Draw Brush tip cursors. Resize or change hardness of cursors by dragging
    Adobe Bridge GPU features
    Preview panel
    Full-screen preview
    Review mode
    See Preview and compare images in Adobe Bridge CS6 Help for information on all of these features.
    GPU/OpenGL preferences in Photoshop CS6
    The advantages of using a compatible video card (GPU) with Photoshop are that you can experience better performance and more features.   Problems can occur if you have an older video card with limited VRAM or if you use other programs at the same time as Photoshop that use the GPU.
    Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS).
    In the Performance panel, make sure Use Graphics Processor is selected in GPU Settings.
    Click Advanced Settings and specify the following options:
    Mode > Basic
    Mode > Normal
    Mode > Advanced Provides the benefits of Normal mode as well as newer OpenGL advances that can result in improved performance.
    Use Graphics Processor to Accelerate Computation
    Use OpenCL Uses the GPU to accelerate the new blur filters (Field Blur, Iris Blur, and Tilt-Shift) – OpenCL will only be available on newer GPUs that support OpenCL v1.1 or higher
    Anti-Alias Guides And Paths Allows the GPU hardware to smooth the edges of drawn guides and paths.
    30 Bit Display (Windows only) Allows Photoshop to display 30 bit data directly to screen on video cards that support it
    Quick GPU Troubleshooting Steps
    You can experience problems such as artifacts, errors, and crashes if there are incompatibilities between Photoshop and the display components that access the GPU.
    If you experience crashes, incorrectly rendered windows or objects, redraw issues, or performance issues while running Photoshop, first determine whether OpenGL is causing the problem.
    Turn off OpenGL.
    Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS).
    In the Performance panel, uncheck Use Graphics Processor. Click OK.
    Restart Photoshop, and perform the same function.
    If the problem recurs while OpenGL Drawing is disabled, OpenGL is not the cause. For additional troubleshooting, see Troubleshoot system errors and freezes | Adobe software on Windows (cpsid_82252) or Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x (cpsid_82414).
    If the problem resolves, proceed with the rest of the troubleshooting steps to fix OpenGL.
    Make sure that you're using the latest update of Photoshop.Updates fix bugs and issues.
    Update the display driver.Updated display drivers can fix many issues, such as crashing, incorrectly rendered objects, and performance problems. Determine what video card you have and go directly to the manufacturer's website (nVidia or ATI/AMD) and download the latest driver. (Note: Simply doing a Windows Update is does not guarantee you are using the latest driver. You must go directly to the nVideo or ATI/AMD websites to get the absolute latest driver.) After you update your driver, turn on Use Graphics Processor in Photoshop preferences.
    Reset preferences.
    Resetting preferences returns OpenGL settings to their default status. Reset Photoshop preferences by pressing and holding Shift+Ctrl+Alt (Windows) or Shift+Option+Command (Mac OS) immediately after you start Photoshop.
    Click Yes when asked if you want to delete the Adobe Photoshop Settings File.
    Retry the function that caused the problem.
    Change the OpenGL mode to Basic.
    Setting the OpenGL mode to Basic uses the least amount of GPU memory and the most basic GPU feature set.
    Close all documents.
    Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS)
    In the Performance panel, click the GPU Settings Advanced Settings button.
    Choose Mode > Basic
    Restart Photoshop.
    If this solution resolves the problem, switch to Normal mode. See if the issue recurs. If the issue recurs, return to Basic mode.
    Note:  If you’re changing GPU preferences to troubleshoot a problem, re-launch Photoshop after each change.
    If you are using more than one video adapter, remove the additional cards.
    Multiple video adapters can cause problems with GPU accelerated or enabled features in Photoshop. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Otherwise, crashes and other problems can occur in Photoshop.
    Note: Using two video adapters does not enhance Photoshop's performance.
    Check your Cache Levels setting.
    If you've set your Cache Levels to 1 in Photoshop preferences, you can experience performance issues with GPU features. Reset Cache Levels to the default setting, which is 4.
    Choose Edit > Preferences > Performance (Windows) or Photoshop > Preferences (Mac OS)
    In the Performance panel, choose Cache Levels > 4.
    The GPU Sniffer
    To help guard against Photoshop crashes related to bad GPU hardware or drivers, Photoshop employs a small program called the GPU Sniffer. Every time Photoshop is launched, Photoshop launches the sniffer. The sniffer runs rudimentary tests of the GPU and reports the results to Photoshop. If the sniffer crashes or reports a failure status to Photoshop, Photoshop will not use the GPU. The Use Graphics Hardware checkbox in the Performance panel of the Preferences will be unchecked and disabled.
    The first time the sniffer fails, Photoshop will display a dialog indicating that it has detected a problem with the GPU. On subsequent launches the dialog will not appear unless the Photoshop preferences are reset.
    If the user corrects the problem, either by replacing the video card or by updating the driver, then the sniffer will pass on the next launch and the Use Graphics Hardware checkbox will be enabled and returned to its previous state (enabled or disabled).
    Tested video cards for Photoshop CS6
    Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. While the minimum amount of VRAM supported on video cards for Photoshop CS6 is 256MB, some features require 512MB of VRAM to be enabled.
    Note: Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
    nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500 series 
    nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000
    AMD/ATI Radeon 2000, 3000, 4000, 5000, 6000, 7000 series
    AMD/ATI FirePro 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900
    Intel Intel HD Graphics, Intel HD Graphics P3000, Intel HD Graphics P4000
    Note: ATI X1000 series and nVidia 7000 series cards are no longer being tested and are not officially supported in CS6 – some basic GL functionality may be available for both these cards.
    Note: 3Dand some Open GL features are disabled on Windows XP, as stated on : http://labs.adobe.com/technologies/photoshopcs6/

    I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.

  • Adobe Flash crash when I try to upload some photos to create an album on Facebook . I think this issue related to the new version of Mozilla Firefox that I had installed 3 days ago and cause my system not able to open the internet . But I have sent a rep

    Adobe flash crash when I try to upload photos to created album on Facebook . Is this related to the new version of Mozilla Firefox that I installed few days ago.
    == This happened ==
    Not sure how often
    == This morning July 18th 2010

    Did you reinstall CS3 after CC?
    For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
    And you shouldn't need to save as IDML after opening the .inx in CC.

  • Issue related to the Credit memo and S.O.

    Hi,
    I have one issue related to the Credit memo and S.O.
    We have a network of Dealers and Dealer inventory is linked with our system. When user creates S.O for Dealer1.If the item is not avail in our inventory and it is avail in any other Dealer inventory (Dealer2), then the system creates S.O wrt the Dealer2.
    In this case as the material is directly delivered from Dealer1 to Dealer2, there is no any GI in our system.
    So, the transaction with Dealer1 will be the normal as usual. But, we have to return the goods amount to the Dealer2 with any suitable way. We are considering it as a Credit memo.
    My question is, as we have created S.O wrt the partner function- Dealer1 and we are creating CR memo for Delaer2, is there any way through which we can link the se two transactions with customizing so that we need not to make any ABAP programming.
    I mean can we create Cr memo wrt S.O when the partner functions are different?
    Pl. guide me.
    Thanks,
    Roopan.

    You have an interesting Scenario.
    You can handle this scenario in multiple ways
    1. Third party Scenario (Here Dealer 1 becomes Vendor &Dealer 2 remains Customer)
    2. Order related sales & credit memo.
    3. Intercompany sales, where you represent dealers place as a plant in your system. (Not an ideal way to handle the scenario, but possible option)
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Issue related to the Excise Postings

    Issue related to the Excise Postings
    My Scenario is i have an Purchase Order with Excise Duty of 16.48%
    For Eg: Net Price(1000) + Excise Duty (16.48%) = Rs.1164.8
    my vendor gives me a Modvat of 10% i.e Rs.104.8
    but i have to pay him the total amount (i.e with excise)=Rs.1164.8
    How to do the GR with Excise & Invoice Verification??
    Wat amount will be Credited to vendor???
    How to do Excise Posting for this Scenario???
    Thanx & Regards,
    Kumar Rayudu
    Message was edited by:
            Kumar Rayudu

    Hiii Ramakrishna,,
    User doesnt know at the Time of Purchase Order that how much excise & Modvat will be getting. Only the Gross value is given in the Purchase order including all
    taxes ( No Tax Code in the Purchase Order).
    Excise Invoice and Vendor's Bill are received when the Materials are received.
    They will get the Modavat according to the Excise Invoice of the Manufacturer 
    Now while doing GR i manually give the Excise BED & Cess given in the Manufacturer Excise Invoice.
    Post the Excise Invoice before doing MIRO.
    The Problem is in the MIRO Transaction.
    At the MIRO i have selected the Tax Code with Excise.
    System is caluclating the the Excise on the PO Value i.e more than the value in the Vendor Excise Invoice (Part 1 & Part 2) and the Liablity of vendor is increased and the difference amount is posted to the material.
    Everything is going fine except the Vendor's liability and it should be value of the Purchase Order.
    How the system is caluclating the Value ???
    am i doing any wrong procedure???
    Explain me???
    Thanx & Regards.
    Kumar Rayudu

  • Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the f

    Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the fix?

    Do you get an error message? If so, what does it say?
    Do you get a Blue Screen?
    Does something else happen?

  • PS6b1: "The GPU Sniffer Crashed" Win7 X64

    PS CS6B1 reports "Photoshop detected an error in your display drive" and disables GPU settings when running on Win7 x64 system with Asus EAH 6970 (AMD Radeon 6970) graphics card.  I verfied that the latest Asus/AMD drivers are installed and working properly.
    Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 3200 MHz
    Built-in memory: 24566 MB
    Free memory: 18591 MB
    Memory available to Photoshop: 22238 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    The GPU Sniffer crashed on 3/24/2012 at 8:27:58 AM
    Display: 3
    Display Bounds:=  top: 146, left: 2560, bottom: 1226, right: 4480
    Display: 2
    Display Bounds:=  top: 178, left: -1920, bottom: 1258, right: 0
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1440, right: 2560
    No video card detected
    Serial number: Tryout Version
    Application folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: E:\scratch\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      E:\, 1.82T, 1.70T free
    Required Plug-ins folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1642  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   5,0,10,0  
       AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
       BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Dicom 13.0
       Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Embed Watermark 4.0
       Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Extrude 13.0
       FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mezzotint 13.0
       Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Pinch 13.0
       Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0
       Shear 13.0
       Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Sumi-e 13.0
       Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Underpainting 13.0
       Vanishing Point 13.0
       Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins:
       Camera Raw 7.0
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

    What display driver version do you have?
    Try this:  Go to the ATI web site (really, it's the AMD web site), and locate and download/install the latest Catalyst package for your hardware and OS (if memory serves, it's 12.3).
    -Noel

  • The GPU Sniffer crashed...

    My copy of Photoshop CS6 is crashing after startup. I got a crash log and noticed that it says that "The GPU Sniffer crashed". My computer specs are:
    Windows 7 64-bit
    Photoshop CS6 (64-bit)
    Nvidia GeForce 9800 GTX+

    You have a third party driver that has a bug in it. And yes, After Effects and other applications that use the GPU do require updated video card drivers, or else they just blacklists the card as not working.
    Photoshop is working correctly.  But your third party video card driver has a bug that prevent it from working correctly.  To fix the video card driver, you need to update the driver to pick up the bug fixes made to the driver.
    This is not a Photoshop flaw, this is just a bug in your video card driver.
    The only thing Adobe can do is blacklist your card and disable all GPU features when using that video card.  But we can't do that because the card is working for other users who have up to date drivers for their card.
    Bottom line: your current video card driver software has a crashing bug in it, and needs to be updated to fix that bug.

  • I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. How can I resolve this issue?

    I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. There are a number of issues I have run across:
    If I have four tabs open on Safari then I start to get a flickering on the screen from the GPU refreshing
    When I leave the computer alone for more than 20 mins the screen saver should start -- what happens is that the screen goes to black. When I move the cursor I do not get the login screen. I have to reboot
    FireFox Web browser will not run
    I get issues with the computer running very slowly
    I have already turned off the transparency option in settings. Any ideas??
    Cheers
    Matt
    MacBook Pro, OS X Yosemite (10.10), GPU / Video Card with Yosemite

    Do you have more than one OS on the Mac?
    You may want to look at something like http://bjango.com/mac/istatmenus/. This has a Free Trial window, but it is a commercial application. If there are any heat/sensor issues, this may help.
    A SMC Reset or PRAM/NVRAM reset may also help.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    Startup key combinations for Intel-based Macs - Apple Support

  • Qosmio X300-14C - Crash during games due to overheating of the GPU

    Hi everybody. I recently by a Qosmio X300-14C (core 2 Quad Q9000,? 9700 GTS), and during games, the temperature of the GPU increase till 100 C and the game crash.
    So I buy a USB cooler for my X300. Now, the temperature increase ?only? till 96 97C. And there is no crash.
    I try to put the last bios, the last Toshiba GPU driver, the last nvidia GPU driver, the same.
    When I start Vista, without any application, the temp increase till 65C. The fan increase his speed, so the temp goes to 55. The fan stop running faster, and the temp start to increase again.
    During games, the fan made the same noise when the temp is 65C or 95C. So I think the problem is here. There is no increase of the fan speed for very high temp. So only 2 speed: under 65C and over, that?s all.
    I install ntune, but the speed of the fan dont move at all. For the GPU I have 20.000 RPM per minute! Is that right?
    Some people have the same probleme?
    Thanks!
    Esteban.
    Message was edited by: Esteban_1

    I have the same problem with my Qosmio X300 (PQX32E-04H02WGR). Anytime I'm playing games there is a blackscreen and a tuneloop.
    I wrote a email to the toshiba-service in germany and they told me to make a new installation of windows, to install the new bios 2.1 and the new beta driver from nvidia. Even this all did not solve the problem.
    So I ring up the german hotline and they told me that there is nothing more to do and that they don't know that problem. They sayed I could try playing the games in a reduced resolution and perhaps this could solve the problem!!!??? Yes... I buy a very expensive gamer-notebook to play with it in a reduced resolution - nice idear.
    After I told them that I think it could be an overheating-problem they want to get the notebook to find it out on my own risk (I have to pay a service-charge if it is no overheating problem).
    We will see...

  • IOS 8 WIFI ISSUES  5ghz airplay related! the real workaround here

    Ever since upgrading to IOS 8, including IOS 8.01, 8.02 and 8.1 I had the wellknown Wifi issue. wifi speeds dropping from 120mbps to about 2mbps @ 5ghz in within a minute after connecting to the wifinetwork. often i couldn't even surf at all. but the wifi signal was always strong. With every update i was hoping for a solution from Apple but it never came. Tried everything that can be found on the internet. Resetting the network settings. Disabling "wifi networking" under Settings > Privacy > Location Services > System Services. Reinstalling my Ipad from scratch Used different routers and different setups. Automatic ip's and fixed ip's and different dns servers just to be sure. Nothing worked. The only workaround is switching to a 2.4Ghz network. So i was doing some tests and found THE solution, but i don't like it all. One of the biggest changes in IOS 8 is the ability to use airplay without a network. by using a wifi connection in combination with bluetooth. And here lies the problem. I disconnected al my Airplaydevices from my network. Denon AV-amplifier AVR2113, Pioneer wireless speaker XW SMA3 and an airport express. Et voila... My Ipad is back to normal. fast... no very fast internet connection and stable as ****. Just like iOS 7 was. Working with it for a couple of hours now without any trouble at all. But do i connect one Airplay device to the network the wifi is not stable anymore and extremely slow again on my ipad air. My Macbook running mac os x mavericks doesn't have these issues, neither does my iphone 5S. and they are also on the same 5ghz network. So I can create and recreate the issue and create a work around... Apple please come with a solution that makes me able to use airplay an ipad (on ios8) on a 5ghz network! like in iOS 7!!!!

    I'm just going to throw something different into the mix.  Could it just be that different Wi-Fi networks may use different ISPs and each ISP will have it's own configuration settings?
    For example, if you have an iPhone on Cellular Network 1 and send an email, it'll use the SMTP server for that network. If you're using your home Wi-Fi you'll have the SMTP server for your ISP in your iPhone's settings, and that's what your iPhone will use when sending an email from home. But if you're accessing a different Wi-Fi network somewhere and it's using a different ISP, then it'll have a different SMTP server. So, sending an email for example won't work unless you turn off Wi-Fi and force your iPhone to use your Cellular Network instead (because it'll have the SMTP server for that network).
    Now, the example above is specific to email, but I'm just trying to think outside the square a little compared to the other responses here.
    Hope this helps you progress to a solution.
    Joe.

  • Mac OS X 10.8 crashes after disconnecting the Thunderbolt display

    Wondering if anyone can help my Mac OS X 10.8.5 crashes after I disconnect the thunderbolt display.
    I normally work in the studio with my macbook connected to an external display.
    When I go to use it without the thunderbolt display it crashes - 4 times in one day, which really isn't ideal when your freelancing.
    I've checked my log files and I have a list of panic reports. I'm not too sure what I'm supposed to be looking for, but each of the reports refer to the graphics control. I've read online it might have something to do with the display sleep, so I've reset that.
    GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff808013e000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
    I'd be very grateful if anyone could help
    Chloe

    Hi Chloebat,
    I'm sorry to hear you are having issues with your MacBook Pro. If you continue to have intermittent but persistent crashing issues with your Mac, possibly related to the display, you may find the troubleshooting steps outlined in the following article helpful:
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
    Regards,
    - Brenden

  • Safari 2.0.4 crashes 100% of the time on a Whitebook

    My friend who is 12,00 miles away reports that her Safari will not launch and after the first time when it actually admitted to quitting unexpectedly, no longer says anything to excuse itself.
    She's using a Whitebook single core OSX 10.4.10
    I've done as much as I can via Skype. We've tried:
    1. Login in the Guest Account and Safari launches okay so we know it is user account related.
    2. The crash report is:
    Host Name:
    Date/Time: 2007-11-12 19:17:27.540 +0800
    OS Version: 10.4.10 (Build 8R2218)
    Report Version: 4
    Command: Safari
    Path: /Applications/Safari.app/Contents/MacOS/Safari
    Parent: WindowServer [60]
    Version: 2.0.4 (419.3)
    Build Version: 31
    Project Name: WebBrowser
    Source Version: 4190300
    PID: 218
    Thread: 2
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNINVALIDADDRESS (0x0001) at 0xffffff9c
    Thread 0:
    0 libSystem.B.dylib 0x90009cd7 machmsgtrap + 7
    1 com.apple.CoreFoundation 0x9082d2b3 CFRunLoopRunSpecific + 2014
    2 com.apple.CoreFoundation 0x9082cace CFRunLoopRunInMode + 61
    3 com.apple.HIToolbox 0x92ddd8d8 RunCurrentEventLoopInMode + 285
    4 com.apple.HIToolbox 0x92ddcfe2 ReceiveNextEventCommon + 385
    5 com.apple.HIToolbox 0x92ddce39 BlockUntilNextEventMatchingListInMode + 81
    6 com.apple.AppKit 0x93263465 _DPSNextEvent + 572
    7 com.apple.AppKit 0x93263056 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 137
    8 com.apple.Safari 0x00006cea 0x1000 + 23786
    9 com.apple.AppKit 0x9325cddb -[NSApplication run] + 512
    10 com.apple.AppKit 0x93250d2f NSApplicationMain + 573
    11 com.apple.Safari 0x0005f54a 0x1000 + 386378
    12 com.apple.Safari 0x0005f471 0x1000 + 386161
    Thread 1:
    0 libSystem.B.dylib 0x90009cd7 machmsgtrap + 7
    1 com.apple.CoreFoundation 0x9082d2b3 CFRunLoopRunSpecific + 2014
    2 com.apple.CoreFoundation 0x9082cace CFRunLoopRunInMode + 61
    3 com.apple.Foundation 0x92820d3a -[NSRunLoop runMode:beforeDate:] + 182
    4 com.apple.Foundation 0x92820c36 -[NSRunLoop run] + 75
    5 com.apple.WebKit 0x94d3ab89 +[WebFileDatabase _syncLoop:] + 198
    6 com.apple.Foundation 0x927eb2e0 forkThreadForFunction + 123
    7 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 2 Crashed:
    0 <<00000000>> 0xffff0ac7 __memcpy + 807 (cpu_capabilities.h:228)
    1 com.apple.Foundation 0x927f3e1a _deserializeBytes + 113
    2 com.apple.Foundation 0x927f3cec _decodeCStringAtCursor + 168
    3 com.apple.Foundation 0x927f3a93 -[NSUnarchiver initForReadingWithData:] + 269
    4 com.apple.Foundation 0x928482c6 -[NSURLCache _diskCacheGet:] + 566
    5 com.apple.Foundation 0x92847db2 -[NSURLCache cachedResponseForRequest:] + 137
    6 com.apple.Foundation 0x928473ec -[NSURLConnection(NSURLConnectionInternal) _chooseCachedResponse] + 101
    7 com.apple.Foundation 0x92847185 -[NSURLConnection(NSURLConnectionInternal) _performLoad] + 546
    8 com.apple.Foundation 0x92846b08 _resourceLoaderPerform + 250
    9 com.apple.CoreFoundation 0x9082cf92 CFRunLoopRunSpecific + 1213
    10 com.apple.CoreFoundation 0x9082cace CFRunLoopRunInMode + 61
    11 com.apple.Foundation 0x92820a0f +[NSURLConnection(NSURLConnectionInternal) _resourceLoadLoop:] + 259
    12 com.apple.Foundation 0x927eb2e0 forkThreadForFunction + 123
    13 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 3:
    0 libSystem.B.dylib 0x90009cd7 machmsgtrap + 7
    1 com.apple.CoreFoundation 0x9082d2b3 CFRunLoopRunSpecific + 2014
    2 com.apple.CoreFoundation 0x9082cace CFRunLoopRunInMode + 61
    3 com.apple.Foundation 0x92847bc2 +[NSURLCache _diskCacheSyncLoop:] + 206
    4 com.apple.Foundation 0x927eb2e0 forkThreadForFunction + 123
    5 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 4:
    0 libSystem.B.dylib 0x9001a1cc select + 12
    1 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 5:
    0 libSystem.B.dylib 0x900248c7 semaphorewait_signaltrap + 7
    1 com.apple.Foundation 0x9284126c -[NSConditionLock lockWhenCondition:] + 39
    2 com.apple.Syndication 0x99de5966 -[AsyncDB _run:] + 181
    3 com.apple.Foundation 0x927eb2e0 forkThreadForFunction + 123
    4 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 2 crashed with X86 Thread State (32-bit):
    eax: 0xffff0770 ebx: 0x927f3db7 ecx: 0xffffff90 edx: 0x0000000d
    edi: 0xffffff9c esi: 0x019fc99e ebp: 0xb019f5f8 esp: 0xb019f5f0
    ss: 0x0000001f efl: 0x00010286 eip: 0xffff0ac7 cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    So we know it is thread 2 and something with
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNINVALIDADDRESS (0x0001) at 0xffffff9c
    She can't find any files called "com.apple.Foundation" or "com.apple.CoreFoundation" to remove.
    3. She's having repeated issues with iTunes after EVERY upgrade. Her iTunes Library" always disappears. The crashing Safari started after the latest update of iTunes and launching iTunes now gives the dialogue
    "The file "iTunes Library" does not appear to be a valid iTunes library file. iTunes has created a new iTunes Library and renamed this file to "iTunes Library (Damaged) 1"" .... talk about grammatically challenged!
    4. We've tried dragging the com.apple.safari.plist to the desktop exercise and it didn't work.
    Any offers?
    Cheers ....
    PS I'm having enough issues with Mail freeeeeezing constantly but that's another broken Apple story on the other forum!

    Hi
    4 com.apple.Foundation 0x928482c6 -NSURLCache _diskCacheGet: + 566
    5 com.apple.Foundation 0x92847db2 -NSURLCache cachedResponseForRequest: + 137t
    Those entries from the crash thread indicate the Safari cache is corrupt. Go to the Home folder of the regular user account>Library>Caches. There, move the Safari folder to the trash, then restart Safari.
    Regarding iTunes, that's best asked in the iTunes forum.
    Post back

Maybe you are looking for

  • STO depot to depot

    Hello While doing STO between depot to depot for the same company am getting this error. I did this ME21N- VL10B-Vl02N-VF01- then if  I go with J1IIN to get excise invoice  then system comes with this error message. "Document is of plant 1871 which i

  • TA26054 Hi! I'd like to replace the fuse ,wether ceramic or not on this PSU wich is Ac Bel api-9841-291

    Hi ! I would like to change the power supply  for atx or other brand and looking for some info that would simplify an overdue research that led to little info, ie links would not result in opening correct window , example : http://http://forums.macru

  • How to print grandtotal in table footer only in the last page in SMARTFORMS

    Hello Experts, How do I print the GRANDTOTAL in the table footer only on the LAST PAGE in SMARTFORMS. What I have done is in the text element of CELL1 of the table footer i wrote the folowing logic but not working. /: IF &SFSY-PAGE& EQ &SFSY-FORMPAGE

  • Partial  posting in MIRO

    Hi All, We have a PO of ten items of total 10,000   and Vendor has send the invoice of only one item 1000. How do I get the balance to be 0.00 when the PO quantity is 10 but the vendor is only billing for 1? Thank you, Misbah

  • AIA FP 11.1.1.3 - Deployment Plan Generation for migrating from Dev to Test

    Hi All, Can you please validate the following from a Deployment from Dev to Test perspective. We have almost completed the development for an interface using AIA 11g, and are in the process of moving the interface from one instnace to another, and an