LR & Epson Artisan 725

Just installed LR 5.2 on a Win8 machine w/ Epson Artisan 725 printer.  LR will not allow borderless printing (can not set margins to zero) even though the printer is capable.  Any ideas?

No, that seems to be the problem, it will not allow margins to be set below .1 which leaves a fine white line around the picture.  I'm posting for a friend whom I help set up LR for yesterday so I don't have access to the printer/laptop right now and I am not familiar with her printer.   We installed from disk 5.2 and later updated to 5.6 (which I did not oversee) so perhaps the problem has been resolved by the update.  I'll know more tonight.  Thanks for your help. 

Similar Messages

  • Wireless printing (Epson Artisan 725) and multiple networks

    Hello. After spending the better part of a day trying to get the wi-fi printing to work on my new Epson Artisan 725 all-in-one, I finally realized the problem is this:
    My MacBook Pro (with Snow Leopard) is connected to my home office network via ethernet and my home/family network via the AirPort card. This has never posed a problem before, and I've been able to print to the USB printer on my wife's MacBook, for example, just fine.
    I wasn't able to properly configure this wireless Epson (on the family network) until I unhooked the ethernet cable from my MBP, and it won't print unless I do that, either.
    So I could switch the printer to my office network, but then my kids won't be able to print to it. Not the end of the world, but is there a way I can be connected to both networks and use this printer?
    Esoteric problem, I know. Thanks for any advice.
    -Doug

    My name is Syd and I work for Epson America, Inc.
    Unfortunately, the printer can not be on 2 networks at the same time. You would need to use the printer control panel and connect to each network whenever you wanted to change. Using the ethernet cable would not allow any wireless access. The only thing we could recommend would be to connect to one network hardwire or wireless, and if the other network has only one computer, connect this USB. The printer will do network and USB simultaneously.
    We would recommend contacting technical support via phone if there are any questions or they can provide a walk through of the installation. The direct number is 562-276-4382.
    Here to help,
    Syd

  • Cannot add my new Epson Artisan 725 to my printers list.

    Hello,
    I have a problem, i just bough a new Epson Artisan 725. The wireless set up works perfectly. But when it comes to add it to my printer list. It doesn't work.
    A window pop up, telling me that there is a software available for this printer from Apple. I accept and it starts to look for the software. But suddently an error message appear telling me that the printer's software is currently not available. And to contact the manufacture of the printer.
    I've been on Epson's website, and download a whole bunch of drivers, nothing works...
    I'm getting irritated with this printer...
    Can someone give me the solution ??
    That would be amazing !
    Thanks.
    Matt

     Hi again
    You really are very helpful.All this is taking your time up so sorry
    I followed your instructions to the letter and everything came up ok as far as the bit when I reached the 'admin' PW
    then I kept getting a pink error page and couldnt go any further. Im sorry to be such a pain.
    It seems it is requesting a user name which I ignored but once I add 'admin' it blocks me.
    Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
    IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
    If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
    If you get 4 replies then,try to adjust the browser settings...Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
    Now,go to start>>>run and in the run box type http: "//192.168.1.1" without quote and hit enter.Now,it will prompt you for username and the password.Leave the username blank and type admin in the password.
    Thanks Peanut
    Mrs Moo.

  • HT4628 My Epson Artisan 725 prints just fine but, when I tried to scan it seems not to be connected. I downloaded the scanner driver but I don't see it. And I can't find where to verify settings.

    I'm having trouble scanning with my Epson all in one. I downloaded the scanner driver and tried a couple of things through epson support. I can't seem to find the driver on my Mac anywhere. I tried to download it again but still can't locate it. My printer is an Epson Artisan 725. The driver for the printer looks to be a 720.

    I have same issue - have you solved this yet?

  • Just installed snow leopard/ now my Epson artisan 725 will not print

    I downloaded snow leopard( so i could transer my i tunes to mynew ipod(7) onto my macbook.( older original macbook 5+yrs)
    what do i have to do to make my Epson artisan 725 wireless printer communicate with my laptop again.( my mac os is 10.6.8   )  i do not see the 725 on the list of compatible printers .  

    Snow Leopard is not a download. Did you install it from disk? What OS did you have before?
    You may want to check on Epson's web site to see if they have an updated driver.
    Best of luck.

  • Epson Artisan 725 scanner fails under Yosemite

    Thought I'd tested everything important before upgrading to Yosemite, but when I went to use the scanner on my Epson Artisan 725, the scan driver fails with error message "Scanner is warming up." It never gets beyond this point. Scanner works fine from my backed up Mavericks system. I went to Epson's web site looking for a driver update & found a popup notice regarding Yosemite which states that Apple is responsible for the Epson drivers via software update. My Yosemite system is all up to date. So it appears Apple dropped the ball here. Suggestions appreciated.

    Apple only distributes what Epson gives them. They don't write the drivers.
    Try Applications/Image Capture and VueScan.
    VueScan
    VueScan FAQ

  • Epson Artisan 725 Arthic White - Not able to print wirelessly

    I just got an Epson Artisan 725 and I'm amazed with the quality of the print job the downside is that even tough I have already done all necessary updates I'm still not able to print wirelessly. When I try to ad it on my printer's list I can not find it! Also, I realized that the manual of the printer is really poor on explanation and it is missing information about it.
    I have a MCBP 15 running Mac OS X v10.6 wirelessly connected on a linksys router as the printer is also. The printer finds the wifi and connects to it susccesfuly but I still not able to find it!
    If somebody can help me I really appreciate it!
    Thank you in advance for any help!

    I'd suggest going to the Epson website and checking/downloading the manual for your model; when I set up my Artisan 810, there were specific instructions on how to install it (both wired and wirelessly) - the wireless install included steps such as connecting it via a USB cable first and then disconnecting the cable at some point during the install process. Also, I had to enter the printer's MAC address on the router's website - if your model is similar to mine, you can get the MAC address by checking the setup settings on the LCD panel.

  • Documents stuck in queue with Epson Artisan 725 Printer

    I just bought an Epson Artisan 725 all-in-one printer, replacing an Epson Stylus Photo R200.
    I dutifully ran the install CD. The printer is found on the Airport Network. The iMac G4, running 10.4 can print. Neither the iMac G5 or the MacBook, both running 10.5.8 can print. Documents, including the test page, get stuck in the queue, with a status of "stopped," and can't be requeued.
    I get the infamous error: (/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacO S/rastertoescpII) stopped with status 206!
    which I can "catch" and copy from the print queue. Or I can see it in the CUPS error log.
    I've tried all kinds of uninstalling, reinstalling, reinstalling upgraded drivers from the Epson site, repairing disk permissions. I even got all the way up to the Epson second tier of support.
    They say it's an Apple problem, and I have no AppleCare.
    I would upgrade to Snow Leopard on the MacBook if I knew this would fix the problem. I'm going to do that anyway. But I will still need the iMac G5 to print also.
    What could I try that I haven't?

    Not good here. I've been at it for two days to no avail.
    I have an old G3 iBook; it networks with the Artisan 725, and I can even capture a scan. The printer works fine with my PowerBook G4, but anytime I try to print from the iBook the job queue stops and will not resume. I've run to the end of tech support, reset the Printer Setup Utility, I've deleted and reinstalled the driver and utilities more times than I can count. I even erased reformatted and reinstalled the hard drive, logged on from alternate accounts, even went at it with the fixya mac Printer Setup Repair app. Nothing seems to work.
    I'm guessing that it's just time for a new computer, but dang-it there's nothing I've run across that says it's impossible to use the Artisan 725 with a G3. Anybody with a suggestion would be rewarded with my undying gratitude.

  • Cannot print to Epson Artisan 725

    Okay, the first time I set this thing up I was able to print wirelessly no problem. After restart, though, it refused to print at all--not via USB, Ethernet or wireless. It does, however, scan and save to my computer just fine. Epson of course feels this is a Mac software issue. After reviewing this forum, I tried a few things that seemed relevant, including:
    --downloading and installing the newest driver
    --adding the printer as an IP printer
    --resetting the printing system
    --trashing the Epson library folder
    --restarting in safe mode and repairing permissions
    --downloading and running Printer Setup Repair
    --downloading the Gutenprint drivers
    After this last, I can at least get a file to spool, but the queue says "network host is busy; will retry in 30 seconds..." When I use the old Gimp driver, it causes the printer to spit out a never-ending supply of blank pages.
    It does show up when I ping it and in Bonjour.
    One post mentioned 802.11g and 802.11n printing in regards to an Artisan 810, but I don't know what that means. Anyone have some other ideas? Am I just doomed?

    Just checking, was this the driver you downloaded?
    Printer Driver v8.31
    Intel-based Macs with OS X (v10.4.11 - v10.6.x), PowerPC Macs with OS X (v10.4.11 - v10.5.8)
    epson13988.dmg - 28.1MB - posted on 09/14/10
    http://tinyurl.com/2bmj3as
    Or this one...
    Drivers and Utilities Combo Package
    Intel-based Macs with OS X (v10.4.11 - v10.6.x), PowerPC Macs with OS X (v10.4.11 - v10.5.8)
    epson13990.dmg - 80.8MB - posted on 09/14/10

  • After upgrading to Maverick, my Epson Artisan 725 won't scan. Epson says software is on apple site, but where?

    Has anyone else had this problem and found a solution?
    I'm getting a message that there is a communication problem, however, I can still print so I don't know what to do.
    Why wasn't there a warning on the Maverick download, saying this would be not compatible!

    Hello mareehenderson,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/ht3669
    Best of luck,
    Mario

  • I am using an epson artisan 835 printer wifi compatible is it also capable to use with my iPad?  How do I set it up to print documents from my iPad?

    I am using am Epson Artisan 835 printer, wifi compatible .  Is it also capable to print (AirPrint) from my ipad? Where do I get an email address for my printer?

    See here for Airprint-capable printers: http://support.apple.com/kb/ht4356
    Your printer isn't on the list but you may be able to print with Epson's app or other print apps from the App Store.

  • I have an HP Photosmart 8200 and and Epson Artisan 800 printer and neither one is showing up in my printer selection any more.  How do I get these back?

    I have a MacBook Pro that came with Mac OS 10.7 Lion on it, and had been printing on both an HP Photosmart 8200 and an Epson Artisan 800.  I had an issue where I would print from Photoshop and every time I would print I'd need to make a new printer.  I don't think that it was ONLY WAY, but it worked for me.  Anyways, I finally got tired of scrolling down the list to choose the new printer  – HP Photosmart 8200_23 – or something like that, so I deleted some of the printers that had extra numbers.  This is where the print Print & Scan dialog in the system prefs has the little plus and minus.  It turns out that I pressed the minus on everything - going overboard with my clicks.  Now, I have NO PRINTER and each time my computer tries to download drivers from HP and Epson, they have no updates for me.  When I go on there website there are no drivers for Mac 10.7.  I have no idea how to get my printers back.  Any ideas or assistance would be greatly appreciated.
    Thanks,
    Erik Jurado

    Download the HP drivers here:
    http://support.apple.com/kb/DL907
    Download the Epson drivers here:
    http://support.apple.com/kb/DL1398

  • Cannot print from Aperture v.2.1.2 to an Epson Artisan 800 printer

    I recently purchased an Epson Artisan 800 printer and I would like to be able to print from Aperture. Unfortunately, I have been unable to do so, in spite of multiple conversations with the Epson support group. I am able to print from other applications, such as TextEdit, Safari, and iPhoto. However, when I try to print from Aperture, I never get any output from the printer. Depending on the image that I try to print from Aperture, I will see an error message flash on the printer's display screen.
    I captured the following error message from the "system.log" file:
    Jan 20 20:11:24 new-host Aperture[12196]: An instance 0xce644a0 of class RKPrintPreviewView is being deallocated while key value observers are still registered with it. Observation info is being leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:\n<NSKeyValueObservationInfo 0xf86da40> (\n<NSKeyValueObservance 0x1c6597e0: Observer: 0xb8c7d10, Key path: selection.isModified, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c641630>\n<NSKeyValueObservance 0xce9b170: Observer: 0xb8c7d10, Key path: selection.gamma, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0xce7e7d0>\n<NSKeyValueObservance 0x1c659830: Observer: 0xb8c7d10, Key path: selection.blackPointCompensation, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c640340>\n<NSKeyValueObservance 0x1c65ef80: Observer: 0xb8c7d10, Key path: selection.colorSyncProfile, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c65d8e0>\n<NSKeyValueObservance 0x1c65d890: Observer: 0xb8c7d10, Key path: selection.dpi, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c6715c0>\n<NSKeyValueObservance 0x1c65eba0: Observer: 0xb8c7d10, Key path: selection.sharpenAmount, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c645070>\n<NSKeyValueObservance 0x1c65ebe0: Observer: 0xb8c7d10, Key path: selection.sharpenRadius, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c645630>\n)
    ----------END of ERROR MESSAGE------------
    I am having this problem on both my iMac G5 and my wife's MacBook. Both are running the latest versions of Mac OS X (10.5.6) and the latest version of Aperture.
    If anyone has been able to print from Aperture to an Epson Artisan 800 printer, please let me know how you did it. Thanks.
    Bruce

    I run 10.4.11 and am unfamiliar with that specific Epson. However step one with Epson troubleshooting is to do any OS updates then download and install the latest Epson driver, even if what you are using is current. The new install will simply install over the old installation. Repair Permissions via Disk Utility immediately before and again immediately after both the OS updates and the printer driver installation.
    Once good Epson paper and a new driver installation are done the final step is to carefully follow Gary Ballard's excellent color management tutorials:
    <http://www.gballard.net/psd.html>
    Good luck!
    -Allen Wicks
    P.S. Epson tech support for consumer printers has always been worse than useless. Specialized support for the pro printers is pretty good.

  • The photo print quality from my Mac to my Epson Artisan 810 is poor.  When I take the same photo files (JPEGs) to my PC to print to the same printer without even uploading them to the PC, they print brighter and crisper from my PC.

    The photo print quality from my Mac to my Epson Artisan 810 is poor.  I just purchased my iMac for my photography business in Jan. (this is my first Mac).  When I first tried printing, I noticed the quality wasn't as good as I expected it to be.  Then, I had to print 4-3.5x5s on a sheet, so I e-mailed the image to myself and opened it on my PC to print it (much easier to print that way on PC in Windows Photo Gallery - I think it's impossible to print that way in iPhoto).  That's when I first noticed that when I take the same photo files (JPEGs) to my PC to print to the same printer without even uploading them to the PC, they print brighter and crisper from my PC.
    I've already been on the phone and e-mail w/Applecare many times over this issue. We've tried creating a test user and printing from there, and we've tried reinstalling the OS.  I've tried printing from iPhoto, ImageCapture, and Preview apps/utilities, all w/the same result - no comparison to the PC-printed versions (no enhancements have been performed on the PC).
    I'm out of ideas, and so is Applecare.  They say it's most likely a driver issue b/c the printer is outdated, and that the only solution is to buy a new printer.  BUT it is a pain for me to purchase a new printer - it takes days of research due to the nature of my business and the fact that I need a printer that can print directly onto a disc.  I love this printer and don't want to have to buy a new one if I don't have to.

    englishfreak2004 wrote:
    Yes.  I've checked for updates, and the driver I installed is the same as the one on Epson's website.  I also spoke with Epson Customer Service, which was a dead end.  Apple says the problem is due to an Epson driver issue (blaming Epson), but Epson says that with the older printers, it's actually Apple who creates the driver, so the problem is actually with Apple.  Typical he-said, she-said...
    Maybe not. Probably worth checking here:
    Epson drivers for Mavericks:
    http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp

  • OS 10.6.4 compatibility with HP OfficeJet 6500 & Epson Artisan 700

    Just purchased MacBook Pro and upgraded iMAC and Mac Pro on my local network to OS 10.6.4. iMAC is connected to local network via Ethernet, other computers and printers HP OfficeJet 6500 and Epson Artisan 700 connected via wireless. All went pretty good except for the two printers. You need to install Rosetta for some 3rd party software to work. It's on the OS 10.6.3 disk.
    The HP OfficeJet 6500 is new. In the printer box was a notice to NOT use the enclosed CD's if using OS 10.6. HP manual was terrible. Key was getting the local network operating and then using HP printer keypad to select SETUP/NETWORK SETUP/WIRELESS SETUP WIZARD. It automatically found the name of my local network and then asked me to enter the WEP Key Code of my local network. For some reason the WIRELESS SETUP WIZARD didn't show up for the first day. Now have access to the printer from all computers - even duplex mode works.
    Can't say the same for the Artisan 700 we've had for one year and was working good with OS 10.5. The only computer that could not access the Artisan 700 was the one connected via Ethernet to the local network (other computers wireless). Tried downloading Epson drivers, Network setup S/W, etc. Epson says there is a problem with TCP/IP connection and are "working on the problem" - in the mean time use Bonjour driver. I installed print drivers from OS 10.6.3 disk and then did Apple software update. Don't know why but suddenly Bonjour driver showed up and the Artisan printer was recognized by the computer connected to network via ethernet. Also had to manually set up the Artisan printer again using the printer keypad to select local network and enter the WEP Key Code. Duplex printing does not work though. Year ago when we bought the printer had to call Epson who after 1.5 hr on phone got duplex working, but didn't know why or how. I'd taken notes and tried same thing, but didn't work this time.
    Perhaps this will help other people deciding to do an OS upgrade.

    Thanks for response on the Epson duplex mode problem. I downloaded the updater, but it would NOT open after I installed it. The install created a second file called InkJet Printer 2 (original was w/o the 2). The updater tool is v 8.33 on the one just downloaded while the existing one was v 6.66, so definitely a later version. The v 6.66 gave message "unexpected quit", so it would not open either. Got same results on iMAC and MAC PRO. Do I delete the original InkJet printer file before installing the new download? Was afraid to as afraid driver would not work at all. What am I doing wrong???
    When select duplex mode in the print window get message "duplexer not installed" on both computers.

Maybe you are looking for