LR fails after 42% download using app on CC

Can anyone suggest what to do. I have downloaded PS ok but LR5 on CC app Download fails at 42% every time I try. I am using win 7 serv pack 1.  Have tried explorer and firefox same problem.
Time for money back me thinks!!

Hi KGE,
Welcome to Adobe Forums.
Please use the below alternate link to download Lightroom 5.
http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html
Please make sure to complete the Very Important Instructions section prior to clicking on the download link.
Thanks

Similar Messages

  • After I download an app how can I get the app on my desktop?

    After I DOWNLOAD AN APP FROM THE APP STORE HOW DO I GET THE APP ON MY DESKTOP?

    Click on and drag it from the applications folder.   It should provide a copy that you can work with.

  • After I download an app, I'm back @ app#1

    After I download an app, I'm returned to the beginning of my search and not where I left off.  If I'm downloading app# 300 of 3000, I have to start from app# 1 to continue my search.  Very cumbersome.

    You're not the first person to comment about the 'feature' of the store (I havn't checked the latest version of iOS, but if you havn't got it, it may be worth updating) - you could try leaving feedback and maybe it'll eventually get fixed : http://www.apple.com/feedback/ipad.html

  • After I downloaded a apps called vipboxsports, I cant open safari

    After I downloaded a apps called vipboxsports, I cant open safari.

    Since it affects Safari, it may be installed in any of the Library folders listed below. It's probably more of a brower enhancer than an actual application.
    /Library/Internet Plug-Ins/
    /Library/Input Methods/
    /Library/InputManagers/
    /Library/ScriptingAdditions
    ~/Library/Internet Plug-Ins/
    ~/Library/Input Methods/
    ~/Library/InputManagers/
    ~/Library/ScriptingAdditions
    The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.
    The tilde (~) represents your Home folder.

  • Iphone 4s Screen wont turn on? after I downloaded an app

    Hi there, I just downloaded an app onto my Iphone 4s then suddenly my iphone's graphics were wierd ? its colours just changed the instant I downloaded the app. So at first I went to general settings too see if the colour settings were making it that way but it wasnt. So i proceeded to just turn off my phone and restart it. Then It wouldnt turn back on! i can hear that its on after i connected it to my laptop  but the screen is black? I also tried updating my phone and restoring it but its still like this !
    can someone please help me?

    Hey gloriale96!
    I have an article for you with some troubleshooting steps that will help you resolve this issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Telegraph App failing after iphone4 download

    Anyone help, since downloading iPhone 4 upgrade to my 3GS the Telegraph App opens for a couple of seconds and then vanishes taking me back to my main screen. Is this the download or an App fault with Telegraph?

    Hi Mate,
    Alot of the apps need to be tweaked to work on the OS4. This may be the case. If you have any apps that have recently been updated, try them and you will be able to test if theres any issues.

  • After i download my apps where do i find them??

    i am so confused please help!!

    Welcome to Apple Support Communities
    All applications downloaded from the Mac App Store are installed in the Applications folder, so go there and open your applications.
    If you are using OS X Lion or later, you can find them in Launchpad > http://support.apple.com/kb/HT5548?viewlocale=en_US&locale=en_US

  • Flashbuilder fails to load/download using CC

    I've got a clean installtion of windows 7 and i'm trying to install flashbuilder 4.7.
    When I do I get the following error.  It gets to 50% when installing then fails.  It has created folders and it is registered in the control panel but most of the folders are empty.  I've tried signing out of CC and uninstalling it from my machine to try again.  But each time I get the following error.
    Why can't we just get a download link? Any wonder I'm always being told to use intelliJ for flex applications!
    Exit Code: 6 Please see specific errors below for troubleshooting. For example,  ERROR: DW030 ...  -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 1 error(s)    ----------- Payload: Adobe Flash Builder 4.7 4.7.0.0 {EB510B48-ACF6-43A0-8214-3DA0D6D0936F} -----------  ERROR: DW030: Custom Action for payload Adobe Flash Builder 4.7 4.7.0.0 {EB510B48-ACF6-43A0-8214-3DA0D6D0936F} returned error. Failing this payload.  -------------------------------------------------------------------------------------

    Thanks, I gave that a try and I get the following error when trying to download the link.
    Access Denied
    You don't have permission to access "http://trials3.adobe.com/AdobeProducts/FLBR/4_7/win32/FlashBuilder_4_7_LS10.exe?" on this server.
    Reference #18.2eaafc3e.1381331817.1f29445
    I did manage to get a link from under 'My orders' although it doesn't list version 4.7 which I should have listed.  I did manged to get the url from looking at the url for the 4.6 version (which comes from clicking on 4.5!)
    The installer partially works. Much like the link from within CC.  You can find the folder layout where it tries to intall but they're empty. It tells you that it has installed AIR but not FB. Recommends turning of virus protection etc which doesn't let it work either... (always run installer as admin as well, just in case that is an issue)
    Also since having to update my PW which is now over 12 chars and was accepted by the site - when you try to install with serial number and it asks for your un/pw it doesn't accept it as its now over 12 chars!
    So far - still not been able to install 4.5/4.6 or 4.7.
    going to hunt through my other machine to see if I have a copy of the installer, so very poor from Adobe

  • Assembler failing after form saved using ES3 designer(original works saved using ES2)

    I am having an issue with a form that was created in ES2.  If you use the form created in ES2, the assembler process works fine.  Once you open the form and save it using ES3, the process fails.  Any idea what to look for, or anybody else see this behavior?  I have also created a new form using the the old form as a template and it also fails. 

    Here is some additional information.
    Error thrown by assember process:
    Caused by: com.adobe.internal.pdfm.xfa.XFAServiceException: PDFM_S28008:
    XFA Dynamic assembler failed to stitch a fragment.: Invalid node type:
    ADBE_JSDebugger
    The fault occurred on line 2.
    After some more research today.  I have found saving in ES3 designer adds
    this to the file:
    <!-- 
    ><destination>pdf</destination><pdf><! 
    ><fontInfo/></pdf></agent><present><!    ><pdf><! 
    -->
    On Mon, Jun 3, 2013 at 8:39 AM, Jeremy Ostendorf <[email protected]

  • Downloading/using apps on more than one computer

    If I have an account with adobe creative cloud, with programs on one computer, can i download the programs on another desktop/laptop? please help!

    Download the Cloud manager like you did originally, sign in, and install the applications that are made available.
    Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
    http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    Creative Cloud Help / Install, update, or uninstall apps
    http://helpx.adobe.com/creative-cloud/help/install-apps.html
    Installing Creative Cloud Apps
    http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

  • Final cut pro fails to download from app store

    Final cut pro X fails partway through downloading from app store. When I try to re initialize it immediately fails. Reboot creates the same result. I have 350gb available on this drive. It appears to consistently fail at around 2.2gb of download.

    Solution is:
    1) Close App Store.
    2) Open terminal and run: open $TMPDIR../C/
    3) Delete folder: "com.apple.appstore."
    4) If FCP file exists in the applications folder - delete that too.
    5) Launch App Store
    6) Restart downloads.
    This worked for me and others as well.

  • Nothing updates in springboards after i downloaded apps in iTunes

    Hello Again I have a new prooobleem in my iPhone. After i download my apps via iTunes in PC, I dragged them all to the springboard simulator in the iTunes. I synced it, and then After the syncing, I was so excited because I had lots of apps. but suddenly, it didn't appear in there. Can anyone help me? Thanks in advance.

    Or did you mean you had downloaded it to your iPhone, and you were looking for the app in iTunes to activate it? If so, that is not where you would do it. You need to sign on to your iCloud account on your computer - that's where it is housed....
    Sorry if I misunderstood!
    Cheers,
    GB

  • I purchased an app when I had my iPhone 4s and when I went to the app store to re download the app, I was charged for it again?

    I purchased an app when I had my iPhone 4s.  I went to the app store to re download the app and I was charged for the app again after I downloaded the app.

    IPhone and iPad have different formats.   You would have to purchase the iPad version.   This isn't true of all apps, some work on both iPad and iPod/iPhone (like most games).

  • I have problem in mac store when i try to download app i get note (( app failed to download use the purchases page to try again ))

    i have problem in mac store when i try to download app i get note (( app failed to download use the purchases page to try again ))
    i try to downlod twitter and ccleaner but i can't open the app  ?!?!!!

    It can also be an iTunes issue. Many of us, including myself, are not used to the new interface of iTunes 11 and would find ways to downgrade the available iTunes 11 back to iTunes 10.7 in Mac OS Mavericks. The only issue with downgrading (using AppZapper and Pacifist) is that you will not be able to update/install apps from the App Store after rebooting the Mac.
    If you happen to have downgraded your iTunes in this method, then uninstall the iTunes 10.7 and reinstall iTunes 11 again - the App Store should resume its download/update function without any issue.
    Hope this helps.

  • Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

    Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

    I would say to start by looking on their web site... unfortunately, that appears to be dead.
    Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well.

Maybe you are looking for

  • How to reduce the font size of the title of grid ALV without using OOPS

    Hello i have a title which i have displayed in a grid layout using this code DATA: GRID_TITLE TYPE LVC_TITLE. GRID_TITLE = 'FACTORY OVERHEAD ' CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'     EXPORTING   I_GRID_TITLE                      = GRID_TITLE. Now

  • Pre-populating Server's Current Date in the form- How to??

    The simplest way of doing this is writing one-line formcalc script. This is not fair when the user changes his local system date/time. I need to know how to pre-populate the server date in the form? One way of doing this is writing a web service. Any

  • Some questions about my database access bean

    The following is a bean (minus imports) that access a database and populates several "articles" and then returns a set of them. pretty plain really. The bean is modified from here to add exception cactching and 'fix' other problems along the way. htt

  • Lens Profile: designating a default.

    For my 6D I took the 70-300 VC Tamron as my longer reach walkabout lens. Lightroom has a humongous number of Tamron lens profiles, several of them for every each lens, with some cryptic acronyms. Is there any place where one could find out what they

  • Configuring the Thirdparty in SLD

    Hi All, I am having the requirement as Peoplesoft send the data as a file and that data has to  insert into SAP system. To maintain the Peoplesoft in SLD, what information I required? How can I configure the Peoplesoft in my SLD? Regards, Sree