LR not exporting images with proper presets

how come I can edit an image and then save it by exporting it with preset it looks way different when I reopen the file. and I am not talking little changes I mean crops through peoples faces and super contrasty. it there a better way to save the images to be burned on to a disk later? i just upgraded hoping it would stop this problem. guess what????

My guesses would be that either:
1 - You are Exporting your images in LR without using the sRGB profile and you should be, or
2 - You have a wide-gamut monitor and are viewing sRGB images in a non-color-managed application or at least one like IE that doesn’t respect a non-sRGB monitor profile.

Similar Messages

Illustrator CS4 exporting images with subtle grid overlaye

I've run in to a rather troubling issue where Illustrator seems to be exporting images with a very subtle white grid overlay.
The raw images do not have this grid, neither do the images as viewed in Illustrator.
The grid appears when exporting as .png and .jpg in a variety of resolutions.
Any ideas what's going on or how to remedy?

The images were part of a web mockup that was created in AI.
"Save for Web" did not change the outcome.
I defaulted to Photoshop, which fixed my immediate problem.. but still does not answer my question as to why this is now happening when I have completed this process trouble-free numerous times before.

In iPhoto, how can I export images with the metadata - including the title and caption information - intact as part of the image?

In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?

Check those boxes in the export dialogue - Exporting From iPhoto
LN

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

If you think you're insane now, try maintaining those pop up menus.
As far as I know, these menus have not been updated since FW 8, so
they are at least two versions old.
Save yourself a lot of grief by avoiding those menus. There are many
other products on the market which do a much better job of creating
and maintaining this type of navigation structure.
Read this link before you climb any higher on this slippery slope:
http://apptools.com/rants/jsmenu.php
There was another blog post by the fellow who originally wrote the pop
up menu feature, but I can't seem to locate it. Even he says stay away
from them.
Not the answer you probably want, but I hope it helps, nonetheless.
Jim Babbage

FCPX XML not exporting audio with project...

FCPX XML not exporting audio with any project.
I have tried with several different projects to no avail.
Any thoughts or suggestions?
Thanks

I used no special setting. I even tried to just export audio. Still no audio. I checked the file with GSpot, it shows that it has audio.
Then I though I just went ahead an encode this and output to DVD as a test. It is indeed still no audio when playback on home dvd player.

Adding and /exporting/ image with Metadata problem

i have been able to add metadata to an image i need to publish but for some reason i am having a problem figuring out how to export this metada with the image.
i see i have an option to export as original or as version. does this affect whether metada has been exported?
also, can i export as PNG as get the metadata in the image or do i have to use something like jpg for some reason?
finally, is there a way to verify that the metadata has been exported along with the image to my desktop before i upload to the web?! it seems really sort of odd to have to re-import the image into Aperture to test the exported image to see if the metadata is there. i mean, i am glad i just did this with the image and metadata that i exported b/c the metadata is not there but it seems like this could be simpler.
TIA

What export preset are you using? Did you check the box to include metadata. This is all in the manual. PNG has poor support for metadata so you're best sticking to Jpeg. You can check for the metadata in Preview, or an of a 100 other photo apps.
Regards
TD

IPhoto 5 not exporting images as jpg anymore

Hi all
Yesterday I downloaded the trial version of Fireworks to be able to do some work on my web site. Previously to the download I could export images out of my iPhoto and have it displayed in my finder as .jpg . After downloading Fireworks the images are sent to finder with just the name I've given it with no .jpg. I've tried, in the export box, to change it to jpg when prompted but this doesn't work. Suddenly all the pictures I try to export are not accepted by my web site.
I tried loading the pictures to Fireworks and then saving them but again when looking in the finder under pictures there is no jpg, or any other attachment with the pictures.
I have since un-installed Fireworks and restarted m computer but the problem still exists.
Any thoughts?

Michael:
Launch Image Capture and make sure iPhoto is selected as the application to launch when you connect your camera. IC's preferences is where you make that selection. Did you run any updaters shortly before this started?
As a note if case you have iPhoto delete the memory card after the upload I suggest you do not as there have been too many cases of incomplete uploads and complete erasures. It's safer to have the camera reformat the card.

Exporting images with subfolders by album name

Hello,
I have a project with approx 800 images, organized in 12 different albums. Now I want to export all the images in a folder, which should contains 12 subfolders named with the original album names.
For example, I have a project named "friends" which contains 12 albums named "Emma", "Laura", "Tom", etc... A want to export in order to have this subfolders:
Friends/Emma
Friends/Laura
Friends/Tom
I tried the export-versions option "subfolder format", but I'm not able to do that.
Who can help me?
Thank you,
Paolo

One last idea
you could color label the pics.
For example all images of Emma in the album "Emma" get a red label, all images of Laura get a blue label, ....
There a seven colors available like in Finder. This perfectly matches with your needs^^ Seven persons get a different color each, one person gets no color. So you have 8 criterias. Lucky you, not having nine people :P
Click on your project with all 800 pics and their different color labels, select all and export them.
Aperture now will give each exported image the same color label as it has in Aperture. After export has finished you can easily put the images in a corresponding folder based on the color label...
Have fun

Failed to export images with droplet

I've Created a droplet and tested it successfully in Photoshop, then I use this droplet by select it in Post-Processing when I export DNG to TIFF in Lightroom, but there's a problem:
1. If PS is not opened when I'm exporting images in LR, the droplet will work well, i'll get an processed TIFF
2. If PS is opened before I'm exporting images in LR, the droplet won't work, then I get an unprocessed TIFF
Due to Situation 1, if PS is not opened when I'm exporting images and I tried to exported 30 images with droplet, finally I'll get only ONE image successfully processed, because PS was opened when LR export the first image.
Is there any solution for this problem?
Thanks!!

Thanks for reply. I think I found out the solution but I still not sure what the problem is.
At the first time, I choose "Edit in Photoshop" in Lightroom to Open the DNG file in PS, then I start recording actions, and end up these actions with "cmd-S" & "cmd-W", this proccessed image won't save to the original file (because that's a DNG), it will save to a new PSD file next to the DNG. I think this is why when I use this Droplet to proccess other images, it can't complete the proccess.
So the solution is to create droplet in a normal way, open images (not DNG or other RAW files) from Photoshop instead of Lightroom, so that the file could be saved to it's original file.
In my workflow, I export DNG images to TIFF and select droplet in Post-Proccessing, so after export these images, LR will put them into the droplet, I'll get the result by just one click. I also check "Add to This Catalog" so I can adjust them in LR later.
Thanks a lot!!

Export image with cursor legend

Hello,
I need to export waveform graph to MS word. To do this I am using Invoke node property "Export Image". While doing this, only graph area is being exported and not with cursor legend. In my report I need to show certain cursor values. So please can anyone let me know, how to do this??
Thanks in advance.
Solved!
Go to Solution.

I have the same behavior with LV86 and 2009. Maybe you could use the invoke node Get Image.
JM
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp
Attachments:
Export Image and Get Image LV86.vi ‏14 KB

How to export images with Project Name to be visable by Photo Mechanic.

Hello all,
I am trying to create another complete set of my images, that can be edited by outside programs (Photo Mechanic and/or Lightroom). I am doing this by exporting the images out of a managed library. I want the Aperture "*Project name*" and Rating fields to be passed to Photo Mechanic. And then I want PM to be able to do queries on the Metadata fields containing the Aperture Project Name and Rating. My intention is to use Photo Mechanic to rename the images and relocate the images but still keep track of the Rating and Project Name.
In Aperture, when I add a custom metadata item under IPTC and export the image, that custom metadata item does not show up in PM or Bridge for that matter.
How can I export images and have the Rating and *Project Name* be exported and visible in PM or LR or Bridge?
Thanks in advance,
Dick B.

There is not an easy way but Ian Wood's tool might help you out.
Personally I would just use the "subfolder format" drop down options available in all of the export and relocate dialogs to sort them into directories that are based on Aperture project name - easy enough considering those other tools use file system based folders for there organization structure anyway.
RB

How to export images with meta data from iPhoto?

Hi
I have about 4000 family photos which have been scanned and imported to iPhoto. They are all dated the same day, naturally. I'm now in the process of adding metadata to every photo: location, faces, time and year, file name and description.
Once I have gone through every photo, I will put them into albums based on events and the meta data above.
Eventually, I will want to share all these photos with people who should like to see them (and who are not tech savvy...) I'm looking for the best approach to do to this.
1. Will all the metadata that I have added remain in the photos when I export them?
2. What exactly is the best approach to export these 4000 photos?
- As I have gone through all the hard work of sorting the photos in albums, is it possible to export these photos in the albums that they already in?
I hope to hear from someone out there. Thanks a lot
Best wishes

You need to have an application like EXIF Viewer for Mac OS X to check the files once you've exported them with the various checkboxes checked:
Happy Holidays

Muse Not Exporting Images/ Inconsistent Loading

Here is a folder containing all files for my project:
https://www.dropbox.com/sh/w87ewtlfj9pcnzs/DnUB8_qJHe
Up until yesterday my whole project was all working great, no problems. Now it doesn't matter whether I preview, export, or save, Muse will just not load some assets. It's very inconsistent, as sometimes it will load a certain asset but after refreshing it won't show up anymore. The only one that has consistently not worked is the water animation at the bottom of the page, but, as I mentioned, it was working perfectly just a few days ago with no change. I was just about ready to publish this before it happened, so the timing couldn't be worse. Any help is greatly appreciated!

Hi uphotos!
Your Muse file is giving 12 warnings that you have not exported Edge Animate oam-files to the pages. Check that you have added (exported) only oam-files to the pages from Edge Animate App!
Best Regards
TaikaJim

DO NOT import images with no extension

If you import import images with no extension (I have lots of those from Mac OS 9 days) by reference and then consolidate them with the Move option you will encounter a serious problem (at least with Aperture 1.5.1. on an Intel Mac).
If you quit Aperture and launch it again, the thumbnails for those images will show as being referenced and broken. But another part of Aperture believes that they are in the library. The result is that your images ARE in the library, but are unaccessible to Aperture.
You can repair this by fixing the contents of the apfile and renaming the image file, but it is a major pain to do this on a large scale.
Here is the problem I encountered:
http://homepage.mac.com/bagelturf/files/dbe9ea5dec3f703abb4efece1249d894-682.htm l
And here is the solution:
http://homepage.mac.com/bagelturf/files/8a3a218630e2b36136612e19b4495ba6-683.htm l

Which version?
This is not my experience in 1.5.1: files without extensions are silently ignored, no? That's annoying enough!
Unfortunately, I have a lot of Genuine Fractals files that can't even be catalogued, let alone viewed. I have to keep using Portfolio, which deals with GF files just fine.

Iphoto exporting images with no name and mail with no reply info

One of our Macbook pros, running osx 10.8.5, is sending email via iphoto that ,
#1) creates a photo with NO NAME that cannot be saved no matter what you do,
and
#2) the email can not be forwarded, seems like because there is not "reply to" information.
the Prefs are filled out correctly in the iPhoto email settings.
Why did they configure iphoto to do the "send" FROM iphoto in this OSX version? This worked fine before as it would open up your mail whereby you could arrange and double check things.
So i was trying to do a work around by sending the email to myself but the email and the attachment can not be forwarded. As well the image CAN NOT be dragged to the desktop to be saved. USELESS!
just a Ghost email and attachment.
very frustrating.

InDesign has a feature that will automatically search for other missing links when you fix a missing link. When you relinked the first of your grayscale images, you may have accidentally relinked to the saturated image. When this happened it searched the directory that the newly re-linked file was in for all the other missing files. Since your image names all matched up to images in that directory, they all got re-linked.
This auto-relink feature can be toggled in the relink dialog:
If you have a backup of your file, you can revert to that version, and try to relink your images from that one. In the future you should make sure that images all have unique identifiers, it is bad practice to have images with identical names.

LR not exporting images with proper presets

Similar Messages

Maybe you are looking for