LR saves unwanted tiff copy of image when "edit in" selects an external RIP - ImagePrint in this instance.

Hi,
Latest LR 5.7 installed. I am printing with ImagePrint RIP which is accessed via "edit it" drop down under "Photo" menu selection. LR makes a tiff copy of the image every time I print appending -edit### [### is a number] each time. I have checked with ImagePrint support an they do not send anything back to LR, so LR must be doing some sort of an automatic save.
How can I stop this behavior that is clogging my archive?

If there is a setting to avoid saving the tiff back in Lightroom, I cannot find it documented anywhere.
I understand that the external "editor" needs to have a tiff file to edit or in this case print, but each time I open the original .NEF file or even a tiff file to edit in the external editor, and additional copy is made in lightroom with another '-edit989' or whatever the next sequential number is, is also saved in the catalog. Thus you can have something like _A0009876-edit 734 - edit 735.tiff etc. accumulating.
There is no need to save these TIFFs. but I'll be darned if I can figure out how to avoid this issue.
Same also happens with SilverEFEX, IntensifyPro, etc. I can't find anyone else that has noticed this behavior so I am stumped. Any further ideas.

Similar Messages

When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered.

Aperture: When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered. I can export and open via Photoshop or open directly from file-just not through external editor. Gerry

Hi gerry,
does this happen for a particular image only, or for all images?
And does this happen only from your account or also from other user accounts?
Léonie

After updating itunes 4.10 when editing tags in file adds two covers. This problem is represented as in 10.6.8 and in 10.7.

After updating itunes 10.4 when editing tags in file adds two or three covers. This problem is represented as in 10.6.8 and in 10.7.
Earlier albums were edited with the same cover.
or 3

I think I have the answer.
I was experiencing the exact same problem. I tried lots of different things but what I think works is to exclude your iTunes folder from Spotlight. Open the System Preference for Spotlight, click on the Privacy tab, and then drag your iTunes folder (in your user/Music folder) into that window pane. In fact, I think it is faster when I am fixing tags!
Let me know if it works for you too.
Scott

Aperture not creating new version of raw image when editing in external editor

I have my export settings set up in Aperture 3.5.1 as editing int Photoshope Elements 12 as Tiff files. When I right click on a raw photo in aperture and say to edit in PSE, it will open it in the program, but only in camera raw.
This happens even when I have made edits to that particular file, such as exposure. This is causing problems with saving back to aperture. I have troubleshot this with Elements and the problem seems to be that Aperture is not creating a new version on export.
Can you tell me what I need to do?
Thanks so much for any insight.

What you have described is not how it is meant to work so it sounds like there is an issue on your system.
Try running the first two first aid procedures (repair permissions and repair database) as described here:
http://support.apple.com/kb/HT3805
I think this should fix the issue, but let us know if it doesn't.
PS: When you drag the image from Aperture to PSE on the task bar, you are sending the JPEG preview to PSE, so that's an unrelated process.
Andy

IPhoto 11 loosing images when edited in external editor?

Hi guys.
I am using iPhoto 11 and have it set to "edit in external edit" when i right click on an image. The aspp is Photoshop Elements 9 (PSE9) but when i save the image from PSE9 it duplicates it in iPhoto and i can see it as a thumbnail but when i double click it to view all i get is an exclamation mark and no image?

Thanks for the reminder; I think I read that, too, though it sounded dubious. The signal-to-noise ratio on this issue is murky at best. I submitted a feedback for enhancement, in addition to my bug report from yesterday:
I love iPhoto and have used it for years. But iPhoto '11 has a 'terrible new feature' or misbehavior that really needs a second look.
Please change iPhoto '11 back to the way it's behaved for 2-4 generations since using an external editor was first introduced: the new behavior duplicates photos before editing them the first time. The old behavior was to edit the existing photo and use "return the original photo" in the event that a user wanted to rollback the changes.
The old behavior was intuitive and harmonized with the behavior of using the internal iPhoto editor -- i.e., a user was not expected to develop a different workflow or bloat their library size.
The new behavior is neither intuitive nor efficient. It creates an unequal workflow whether the user decides to use iPhoto vs. external editor. That's just not consistent with the behavior of iPhoto for the past several generations of its existence.

Skipped images when editing?

When I am looking at images (in a film roll) in the library...and I move to the next one by clicking on the right arrow, it often skips over five or ten or fifteen images to the beginning of the next film roll. I can get out of edit and go back in to start again on the skipped images until the program 'decides' to skip a whole bunch again.
Any thoughts on this problem?
G5 Mac OS X (10.4.8)

stg123:
Welcome to the Apple Discussions. Hadn't heard of that issue before. Try clearing out iPhoto's cache folder inside the User/Library/Caches folder. Next would be a rebuild of the library by launching iPhoto with the Command+Option keys depressed and following the instructions to rebuild the library. Select the first three options.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Lose Jpeg images when editing an existing PDF Form in Acrobat X - All other edits update OK

Have just upgraded to Acrobat X and am having problems trying to update an existing PDF Form which includes jpeg images. After all edits are done and I save, previewing the PDF identifies that all of the existing jpeg images within the form no longer display. Unable to figure out what to do to retain these images from the existing PDF.

Hi,
Based on your other post, the original form was developed in LiveCycle Designer. Therefore you would need to edit the form in LC Designer, to reestablish the link to the image files.
Niall

How to copy field groups when editing a form?

Hi everyone,
I´m setting up a form using Acrobat X Pro. When I copy paste fields, they end up in the same field group. Could anyone tell me how to copy groups?
In my case, I would like to copy the answer options from one question, using them as the answer options for the next question.
Any idea?
Thanks a lot!!
Andy

Thank you!
I still hoped that there would be an easier way - also the Radio Button Choices change in weird ways once I change the name...
If there is still anybody who has a better way of going about this - please send a quick message.
Thanks again and best wishes

Can't save order of tracks in playlist when editing

my itouch seems to let me edit the order of tracks by holding and dragging the column on the right. However when I press "done" it reverts to the original order!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

When editing a photo with external editor I can't open that photo in viewer

When I edit a photo in an external program like NIK Collection after I save the photo I can't open any pictures anymore in Aperture. Mosaic and grid view is no problem but in full Viewer nothing happens. When I restart Aperture I can, untill the next edit.....

Re: Nik collection crashes Aperture
Re: Aperture 3.5 Grey screen
Nik Plug-in Grey Screen on Death Workaround
Re: Aperture viewer image does not display "regularly"

New window is opening when editing a google search,how can i solve this?

The window has the title 'opening search' .It looks like
Opening search
You have choosen to open:
[] search
which is a :application/json
from :https:www.google.com
What should firefox do with this file?
Open with []
Save file
OK cancel

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*[[/questions/921535]]

My MBP Retina gets very confused when I plug in/unplug external monitors. Is this normal?

I've noticed my MBP Retina is more easily confused than my old MBP when using external monitors.
The problems occur after unplugging from an external monitor. Unless I actually re-start the computer, the resolution in some apps (e.g. Safari) fails to revert to retina quality. I am often left with the toolbar and windows so far off the laptop screen that it is impossible to reach them and the OS is unusable (have to restart). And just now the machine went into a strange fit where it kept powering on and off the displays every few seconds, apparently unable to decide what mode to be in. Again, I had to restart.
Is it normal to expect that I would have to restart the machine when moving between external monitor/laptop only combinations?
All these effects are fairly intermittent (although very frequent) so could be hard to reproduce at the Genius bar.

*there comes (i was mixing up english and german spelling without noticing )

CS6 creates tiled image when moving from LR4 and HDR Effex Pro

Just recently I've had a problem with CS6 where it creates a partial (tiled) image when "Edit In" from LR4 and when saving back to CS6 from HDR Effex Pro. THe image may have one or several retangles which may be black, white, or part of the image that's in the wrong place if that makes any sense. All software is running with current updates. I've had the software about 6 months and never incurred this problem until the last week. Help!

I've run through several scenarios and find that it's always in CS6 that I have the problem. I opened a file in all modules of Nik as well as OnOne's Perfect Photo Suite. When I go back (save) to CS6 there is always a problem. When I save in CS6 and then open up in LR the image is fine. So the file must not be corrupt, it just doesn't present it properly in CS6. The GPU driver appears to be up to date....last update was in 2011 and I've had this computer since late 2012.

Moving original images when using a "referenced" iPhoto library...

Hello.
My iPhoto library is "referenced" (ie. iPhoto does not copy the images when importing) to my RAW image library which is manually organized outside the iPhoto library. If I want to move the location of these images, does anyone know how iPhoto handles this? Does iPhoto loose track of them when I move them? Will I have to individually re-link all the images? Is there a good way of going about this?
Any advice would be appreciated.
Thanks,
Kristin.

I've had a test alias library find all of the files automatically when the move was to a different location on the same hard drive. Moving to another hard drive it was hit or miss as Terence mentioned. Sometimes re-pointing to a single file in a folder got the whole folder, sometimes not.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Copy/paste images into pages within sharepoint cloud 365?

There seems to be a workaround to use RadControl for this. (http://social.msdn.microsoft.com/Forums/en-US/655c080f-ec1e-4e69-b082-d35973ee426a/copy-and-paste-for-images-in-sharepoint)
However, I don't think we can deploy custom app/binaries onto sharepoint 365.
Is there other way we can easily copy/past images into pages?
Thx

Hi garynguyen,
premise doesn't provide this kind of oob function to copy and paste the image into SharePoint page directly, you may develop your own solution (or use third party solution) to ahcieve this goal.
For Office365 SharePoint online question, we have a dedicated forum as below, you can post there for a better assistance with more experts regarding this Office365 issue.
https://community.office365.com/en-us/f/154.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

LR saves unwanted tiff copy of image when "edit in" selects an external RIP - ImagePrint in this instance.

Similar Messages

Maybe you are looking for