LR slow when writing keywords, XMP auto write turned off
Here's a strange one: If I manually write keywords into LR with even just one file selected, LR will hang for ~30s when I commit the changes. If I use a button from the keyword set to add a keyword, it moves along just fine.
Per advice here, I've turned off indexing on all my drives, turned off XMP autowrite, optimized the catalog, and still it hangs.
Any suggestions?
I forgot to mention but I tried doing that too. I have thousands of keywords as I shoot a lot of stock:( In fact, in the "Keyword Tags" panel on the left side, I can only scroll down as far as the keywords that start with "G". Seems like that may be the issue although I find it strange that LR can't accommodate that many keywords when it's an essential part of a photo library.
Similar Messages
-
Siri is locking my iPhone 5 running ios6 after sending a text message using my Jawbone icon HD Bluetooth earpiece. Sometimes it will lock before the text is even sent. I have the auto lock turned off.
I have this problem too. Auto lock is off and Siri can be used from the lock screen but this defeats the purpose of hands free usage for example when you are on a bicycle and can't use the phone normally. After sending a message or a reply to one Siri locks the phone and you cannot hear new messages until you unlock the phone which can be potentially dangerous!
I'd love to see if there is a solution as I can't see any option in settings (either Siri settings or pass lock settings) to fix this. -
My iPad 3 bettery life is very poor, and it doesn't chrage when it's plugged in and I'm using it, only when it's plugged in and turned off. I'm beginning to be sorry I bought this iPad and that I should have stuck with the iPad 2.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Cheers, Tom -
When I updated my iPad it turned off and when i turned it back on it said connect to itunes and now i am conected to the itunes but what do i do
See; http://support.apple.com/kb/HT1808
-
I downloaded an album last night from iTunes. This morning i noticed it was in my music on my iPhone. I have the auto Sync turned off. How did this happen?
Settings/Store worked...thanks Lawrence
-
My Ipad icloud account has been locked an now i want to delete it but i can't please help me because when u try to delete it it says "Turn Off Find My iPad?" when i press delete acoount and turn off it wants to fill the passwor field but it says that you account has been locked for some security reasons and please help me to delete it.
Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID.
-
Http proxy auto keeps turning off?
Hi, I have an iPhone 5s and the http proxy auto keeps turning off but i need it on auto. Plus the settings i put in the auto keep disappearing?
Have you found any solition to this? Very frustrating, same thing with my iPhone 5. iPad happily keeps it on auto, but iPhone won't stick.
-
MY IPHONE WAS WORKING NORMALLY SUDDENDLY IT TURNED OF AND DOESNT WORK ANY MORE!WHEN I PLUGED IT TO THE CHARGER GIVES THAT ITS IN THE RECOVERY MODE WHEN I REMOVE THE CHARGER IT TURNED OFF DIRECTLY SO WHAT I SHOULD DO PLZ HELP !
Please turn off your caps lock.
All caps indicates shouting, is considered rude and is difficult to read. Many simply will not read such posts.
Enter & Exit iPhone Recovery Mode -
HT1430 When charging my Ipad mini, it turned off and its still not working, what do i do pls??
When charging my Ipad mini, it turned off and its still not working, what do i do pls??
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
why i cant install adobe creative cloud - i try to download afew time's when i start the install its turns off..please help me fix that i wanna try AI
when its go to downloading Creative cloud to des its go downhttp://prntscr.com/4iaboa
http://prntscr.com/4iabrvx
anyone can help me please? -
My iPad keeps dimming on wakeup. I am on iOS 6. Auto dimming turned off. I have to go to brightness setting and touch it to get the brightness back up to my setting. It does not happen all the time but has happened more frequently lately. Any ideas?
Because GPS has nothing to do with WiFi, cellular signals, or data of any sort. GPS is implemented by signals sent by satellites that are received by GPS receivers. The receivers process the information from the GPS satellites and calculate your location. GPS never sends data anywhere; GPS functionality is receive only.
If you have WiFi or cellular data turned on this can improve the accuracy of GPS, because the GPS receiver can then use the known location of cell towers and WiFi networks to refine the GPS location. GPS by itself has an accuracy of 10 meters, or about 34 feet. Using the additional information from WiFi and cellular data this can be brought down to 3 meters (10 feet). This mode is called Augmented GPS, or A-GPS. -
When on a call my phone turns off apple logo on screen
when on a call my phone turns off apple logo on screen can any one help
It's the latest ios version which I'd updated through itunes, the exact version I'm quite not sure about it.
-
ITunes 10 slow when writing to disk
Hi Folks,
I'm running a pretty stout machine (by iTunes standards) and am having serious user experience issues. Whenever I try to play a new song, change the rating, checkmark, etc. and iTunes has to write to the disk (I assume to the library file) the UI hangs for 30 - 90 seconds. Playback of the song (if it was already playing) is not affected; however, I cannot click anywhere within iTunes and it becomes completely unresponsive. It does queue up the clicks though... so if I clicked 5 stars then pause it would take 30-90 seconds to execute the first command and then would pause.
I am running 64-bit iTunes 10.3.1 on Windows 7 64-bit.
My computer is an AMD Athlon X4 630 (2.8GHz quad-core) with 4GB RAM.
iTunes library files are on a 500GB WD Blue drive (7200 RPM) and media is on a 1TB WD Green drive (5400 RPM).I'm having the same issue. iTunes was on a 2nd internal hard drive in my machine. I had about 500Gb of movies fine no problem. Started putting stuff onto a NAS then the slowness began.
The transferred the NAS content to a new 3rd internal drive. Still slow as ****. (just as you describe). When writing to disc there's a pause (e,g when backing up iPad iTunes becomes unresponsive during every transfer of an app)
Any suggestions? -
When writing emails the left hand margin is so close to the edge of the page that some characters disappear from view on the left hand of the page. How can I set the left hand margin to not be so close to the left edge of the page?
Oy. You beat your head for hours and finally concede to asking for help, only to solve it two minutes later. Here's the answer.
In the inspector, on the Layout tab, there's a checkbox that reads, "Show Thumbnail Track".
UNCHECK that box and the gutter goes away. -
Would a 347 MB file be slow? Auto save and auto type turn off?
I am doing an art inventory and add jpegs of the art. I don't resize them they range from 750k to 3MB. I guess if it is slowing the program down i should? It currently is 267 rows by about 18 columns.
Thanks in advance.
Oh can I turn off auto save and auto type? That may help. How do I do that?Done.
Enter Scrip Editor
paste the posted script
File > Save > as Script on the Desktop
Move the script to the folder :
Macintosh HD:Library:Scripts:Folder Action Scripts:
CAUTION, you will be asked to enter your pasword.
Create a folder to do the job. I named mine Normalized. I created mine on the Desktop where it's easy to reach.
Go to :
Macintosh HD:Library:Scripts:Folder Actions:
Double click the alias : Configure Folder Actions
Below the left column, click
navigate to select your new folder
Below the right column, click
select the script image - normalize400.scpt
After that, drag and drop a picture file onto your folder.
The original will be move in the folder Originals (isn’t it original ?)
and a reduced copy 400 x height will be stored in the folder Normalized images.
And now, here is the script :
--{code}
Image - Normalize
This Folder Action handler is triggered whenever items are added to the attached folder.
The script rotates the image counter-clockwise (left).
Copyright © 2002–2007 Apple Inc.
You may incorporate this Apple sample code into your program(s) without
restriction. This Apple sample code has been provided "AS IS" and the
responsibility for its operation is yours. You are not permitted to
redistribute this Apple sample code as "Apple sample code" after having
made changes. If you're going to redistribute the code, we require
that you make it clear that the code was descended from Apple sample
code, but that you've made changes.
modified by Yvan KOENIG (VALLAURIS, France)
2011/12/08
This version normalize pictures so that
(1) the greater dimension become the width one (rotate left if needed)
(2) this greater dimension is ruled by the property maxWidth defined below.
property maxWidth : 400
-- set it to fit your needs
property done_foldername : "Normalized Images"
property originals_foldername : "Original Images"
property newimage_extension : "jpg"
-- the list of file types which will be processed
-- eg: {"PICT", "JPEG", "TIFF", "GIFf"}
property type_list : {"TIFF", "GIFf", "PNGf", "PICT", "JPEG"}
-- since file types are optional in Mac OS X,
-- check the name extension if there is no file type
-- NOTE: do not use periods (.) with the items in the name extensions list
-- eg: {"txt", "text", "jpg", "jpeg"}, NOT: {".txt", ".text", ".jpg", ".jpeg"}
property extension_list : {"tif", "tiff", "gif", "png", "pict", "pct", "jpeg", "jpg"}
on adding folder items to this_folder after receiving these_items
tell application "Finder"
if not (exists folder done_foldername of this_folder) then
make new folder at this_folder with properties {name:done_foldername}
end if
set the results_folder to (folder done_foldername of this_folder) as alias
if not (exists folder originals_foldername of this_folder) then
make new folder at this_folder with properties {name:originals_foldername}
set current view of container window of this_folder to list view
end if
set the originals_folder to folder originals_foldername of this_folder
end tell
try
repeat with i from 1 to number of items in these_items
set this_item to item i of these_items
set the item_info to the info for this_item
if (alias of the item_info is false and the file type of the item_info is in the type_list) or (the name extension of the item_info is in the extension_list) then
tell application "Finder"
--set name of this_item to "YK#" & (text -4 thru -1 of ("0000" & i))
my resolve_conflicts(this_item, originals_folder, "")
set the new_name to my resolve_conflicts(this_item, results_folder, newimage_extension)
set the source_file to (move this_item to the originals_folder with replacing) as alias
end tell
process_item(source_file, new_name, results_folder)
end if
end repeat
on error error_message number error_number
if the error_number is not -128 then
tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
end tell
end if
end try
end adding folder items to
on resolve_conflicts(this_item, target_folder, new_extension)
tell application "Finder"
set the file_name to the name of this_item
set file_extension to the name extension of this_item
if the file_extension is "" then
set the trimmed_name to the file_name
else
set the trimmed_name to text 1 thru -((length of file_extension) + 2) of the file_name
end if
if the new_extension is "" then
set target_name to file_name
set target_extension to file_extension
else
set target_extension to new_extension
set target_name to (the trimmed_name & "." & target_extension) as string
end if
if (exists document file target_name of target_folder) then
set the name_increment to 1
repeat
set the new_name to (the trimmed_name & "." & (name_increment as string) & "." & target_extension) as string
if not (exists document file new_name of the target_folder) then
-- rename to conflicting file
set the name of document file target_name of the target_folder to the new_name
exit repeat
else
set the name_increment to the name_increment + 1
end if
end repeat
end if
end tell
return the target_name
end resolve_conflicts
-- this sub-routine processes files
on process_item(source_file, new_name, results_folder)
-- NOTE that the variable this_item is a file reference in alias format
-- FILE PROCESSING STATEMENTS GOES HERE
try
-- the target path is the destination folder and the new file name
set the target_path to ((results_folder as string) & new_name) as string
with timeout of 900 seconds
tell application "Image Events"
launch -- always use with Folder Actions
set this_image to open file (source_file as string)
set {oldW, oldH} to dimensions of this_image
if oldH > oldW then
set {oldW, oldH} to {oldH, oldW}
rotate this_image to angle 270.0
end if
set |échelle| to maxWidth / oldW
if |échelle| < 1 then scale this_image by factor |échelle|
save this_image as JPEG in file target_path with icon
close this_image
end tell
end timeout
on error error_message
tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
end tell
end try
end process_item
--{code}
Yvan KOENIG (VALLAURIS, France) jeudi 8 décembre 2011 21:25:33
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
Maybe you are looking for
-
Groups on iPad and iPhone not on iCloud and mac.
iCloud and mac sync. iPhone and iPad sync. iCloud and mac - don't syc with - iPhone and iPad. (Contacts) You can imagine, I've tried everything. Thanks
-
Help with Adobe photoshop cs3....
Hello. i need help with something. i'm trying to switch the mode so that both of my files will show up at the same time in cs3. i understand there is a command for it, but i don't know what it is. can someone please help me with this issue? help woul
-
i have a specific requirment 1. need to send notification to multiple user using PO approval 2. send po has been approved mail to requester and receiver 3. need to send notification remainder mail after po is created
-
Hi All, SQL> select * from v$version; BANNER Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production PL/SQL Release 11.1.0.7.0 - Production CORE 11.1.0.7.0 Production TNS for Linux: Version 11.1.0.7.0 - Production NLSRTL
-
Display data as rowwise (horizontally ) instead of column wise ( verticaly)
I am displaying the data from milti select prompt of BI Answers in BIP report. The data from the table is displayed as Table structure : Company. Unit name f_company_._unit_e output : unit1 unit2 unit3 I want output as unit1, unit2, unit3 Thanks Aj E