LR switching modules on me

When I'm in the Develop module, clicking on thumbnails, whether I'm making editing changes to them or not, LR will suddently revert to the Library module, sometimes after only the 3rd or 4th thumbnail I click on. This happens in both LR 3 and 4. Anybody else have this problem? Anything I can do about it? Very frustrating to be taken out of the Develop module when I"m trying to get through my thumbnails and editing steps.

I think you accidentally click on the keyword badge. If you click on the keyword badge on the thumbnail in Develop Module, it will take you to Library Module.

Similar Messages

BUG: Ctrl+Alt+ number to switch modules only works with number pad

Really annoying, since this worked nicely in the beta. If, for example, you hold down Ctrl+Alt+1 (pressing 1 on the top row of the keyboard) to switch to the Library Module, it doesn't work. If you use 1 on the numeric keypad, it works fine. What's the big deal, you ask? Well, try using the number pad on a laptop - you either get to use the number keys or the regular keys, so this shortcut is essentially useless on anything other than a full-size keyboard.

Windows treats Ctrl + Alt shortcuts as special. They are used as hotkeys for desktop icons, and if a key is used for that purpose, it overrides any use within a program. I did a little research, and setting a desktop hotkey to 3 will cause your LR symptoms, where you can't used the normal numbers and have to use the keypad to switch modules. On the other hand, you'd probably be seeing the effect of using the non-number-pad keys (they'd launch a program), so it's a mystery.
In my testing, I noticed that the Firefox browser uses that key combination to switch between its tabbed sessions. If you're running that program, you could test to see if it exhibits the same symptoms.
Hal

Can a broken Display Switch module cause my screen to not turn on or be recognized?

Hi All,
I have recently been having some issues with my LCD screen in my HP Pavillion dv9700. Ever since I replaced the left hinge on my notebook, I have had to fiddle with my screen by closing and opening it during booting to get it to turn on. This only happened when booting into linux. When booting into vista, the screen would turn on without a problem. This morning I was so fed up with this, that I thought maybe some switch was not getting pressed to tell the notebook that the lid was opened. After looking at all the cables and putting everything back together, my screen now no longer turns on no matter how much I open and close the lid. It wont even turn on in vista. I am however able to connect a vga cable to my notebook and use an external monitor without any problems. I opened up the nvidia control panel in both windows and linux and it does not recognize my notebook monitor, only the external monitor shows up. Could this be caused by a broken display switch module? How can I diagnose this problem? Is there a way to bypass the display switch module by jumping two wires?
Any ideas are appreciated,
Thanks in advance
OS: Latest version of Ubuntu Linux 11.10 dual booting with Windows Vista
Problem: LCD Monitor not turning on / being recognized
possible cause: LCD Display Switch Module

Update:
I just figured out that it cant be my display switch module because when i close the lid to my notebook, the external monitor shuts off and the computer goes into standby mode. I now think this might be an issue with the ribbon cable. Is there anything else which might be causing this problem which I am overlooking?

CSM-Content Switching Module

Hi All,
How to shutdown Content Switching Module in Cat 6500 switches ? I want to shutdown only CSM-Module without disturbing Chassis.
Can anyone please send me the command on that ?
Highly appreciate your valuable reply.
Thanks,

Hi,
Assuming you are using IOS, you can power-down a module in a 6500 chassis using the command
"no power enable module " in global config mode where is the slot number of the CSM.
If you are using CatOS then the command would be:
"set module power down "
The CSM should be hot-swappable so you should be able to just pull it out of the chassis, but I think that is a bit vicious if you only want to shut it down.
HTH
Cathy

Function not found in library? 1127 switch module

I am trying to control individual relays in an 1127 switch module with a 1331 attached. Whenever I try to connect to it through the block diagram (or through example programs) I get an error stating "Function not found in library" or sub vi not executable. However when I try to control it from the switch executive front panel it seems to work correctly. When I follow the sub vi error chain I eventually arrive at the library node and I am told to configure it. However when I click configure I get options that are phrased slightly differently than the original sub vi name. How do I get the example code / control over the 1127 installed in an scxi chassis.

Raaron,
The SCXI 1127 is a Matrix / Multiplexer card. If we wanted to try to make it function similar to an SPDT, you will limit the number of "SPDTs" you can create. With the 1331 that can only be configured as a multiplexer and essentially used for a single "SPDT" [com(SPDT) = com (Mux), NC(SPDT) = Ch0 (Mux), NO(SPDT) = Ch1 (Mux)] . If you use the 1332 you have a 4x8 Matrix and can make it into 4 "SPDTs" [com(SPDT) = r0(Matrix), NC(SPDT) = c0(Matrix), NO(SPDT) = c1 (matrix)]. Both of these configurations will not really be normally closed, and you would have to configure it in software to close when you are using it.
If you are looking for a true SPDT I would look at the 1160, 1161 and 1166.
I am glad that it is working now, but I am still confused as to how you were having SW issues though. Maybe the device was being set up as a Traditional DAQ device and was installed on an OS that does not support Traditional DAQ? Resetting the device [for DAQmx use] may have fixed this? I am unsure without further information.
Frank,
National Instruments
Staff Software Project Engineer

1800 series switch module IP address

Newbie question, can the switch module on the 1800 series router be assigned it's own IP range like any other interface?
Cheers

You define vlans on them, and each vlan can be configured with an interface.
Or to each port you can say no switchport and configure each port as a layer 3 interface (with ip address).

WAE Inline Deployment on a router intergated switch module

Hi,
Is it possible to simulate an inline WAE deployment on a router with an integrated switch module?
Thanks.
Ed.

Ed,
Unfortunitely you have to use WCCP or PBR with NME-WAE. Inline is only possible with the inline card on an appliance.
Dan

PXI Switch Module

How do I detect the Switch module present in PXI Controller. I am programming in lab veiw RT 7.0 version.
I also need to find the device number and the slot info of the device present in RT controller programmatically.
How do I achieve this. Is there are any issues programming switch modules in Real time .
Suresh Thangappan

Suresh,
Your RT controller should have NI-DAQ 7.3 or later installed. Once NI-DAQ is installed, install your switch modules and restart your controller under RT. On your host computer, expand "Remote Systems", and under the IP adress of your RT controller you will see all the switches you have installed.

Connecting dell vrtx switch module to nexus 7k

I have a dell vrtx chassis with built in switch. How do I configure the nexus 7k port to connect the switch module to it?

We can have a Nexus 7k VPC pair with CB3020 HP Blade Center switches attached through a VPC group.
Regards,
Naveen

Can you Connect Cisco switch modules for to N2K?

I have not seen anything about connecting Cisco Switch modules for Blade Chassis to fex. Does anybody now if you can do that?
thank you.

thank you Lucien.
I think you got a right name for N2Ks, a NIC card extender. In my opion N2K should be able to support Blade switches. Not every company has just rack mount servers, most enviroment is mixed. In my case, I run out ports on N5K, but plenty available on N2K. I want add two more blade centers with gig switch modules in them. now I have to buy a N5K!!!. I'm sure Cisco can make N2K to support switches too.

IP changes on a Cisco Switch Module for IBM BladeCenter

Hi everyone,
I was just wondering if anyone out there is using the MDS modules for IBM BladCenters and if so whether you had had any problems changing the IP details through the BladeCenter management interface. I needed to change a subnet mask but since making the change I've lost all IP connectivity to the module and it shows Status: Disabled under the new IP Details.
I've tried resetting the module to factory defaults and whilst this seems to have had some effect (e.g. the fc ports have all gone down) it has given me any IP connectivity or allowed me to set up a new IP address.
Has anyone else seen this and if so, how did you get round it.
Thanks,
David

Hi Mike,
I saw that it doesn't allow you to change any of the IP config through the CLI, hence why I moved on to trying the MM.
Fabric manager can't connect to the module on it's address (I was just correcting the subnet mask) and it is not pingable from anywhere on the network, so it seems to me that the IP path out through the MM isn't working.
I tried the same process on one of our test chassis and the same thing has happened there.
Configuration for that slot looks like this on the MM:
Bay 3 (Fibre SM)*
Current IP Configuration
Configuration method: Static
IP address: 172.20.221.9
Subnet mask: 255.255.255.0
Gateway address: 172.20.221.3
New Static IP Configuration
Status: Disabled
To change the IP configuration for this switch module, fill in the following
fields and click "Save". This will save and enable the new IP configuration.
IP address 172.20.221.9
Subnet mask 255.255.255.224
Gateway address 172.20.221.3
How does the MM communicate with the module (telnet/snmpv1/snmpv3/ssh?) and with what credentials. I'm thinking that there must be something in how we've configured the switches that is breaking this in some way (we've enabled aaa auth for login, removed some default SNMP details, and disabled the telnet server).
There seems to be rather a lack of docs on these modules, is there anywhere to find out more detail on how they all hang together.
Thanks for your interest and help,
David

Cisco 2951 poe limitation for switch module ?

Hi , i have cisco 2951 router with switch module :
SM-D-ES3G-48-P
there are many poe devices connetced to the switch module .
the problem we face is , sometime the poe devices get down and up (flapping)
after investigatipon by command
show power inline police
i found the devices is getting about 60 Watt , and there is remaining power about 200 watt.
the question is , how to investigate and troubleshoot this issue ?
is there any limitation in the power for that platform ?

Hi ,
thanks for reply
the issue is :
interfaces get down , then up
some times it still down and take long time to be up agian !!
exactly if i did shutdown , then no shutdown
thats the problem that we face !
sorry cant access the swith now , if i can i will post the config i have.
thanks for ur time
regards

Cisco Catalyst 4507R Module WS X4424GB RJ 45, Multi-speed Gigabit Ethernet Switching Module (24-port)

i am confused if this one
Cisco Catalyst 4507R Module WS X4424GB RJ 45, Multi-speed Gigabit Ethernet Switching Module (24-port)
would be compatible to its chasis if change by this one
WS-X4424-GBRJ45-RF
Catalyst 4000 24port 101001000 Module RJ45 REFURBISHED

Yes it you get the refurbished with the good one then it would get detected and works fine.
BTW- This module is EOL /EOS and below is the replacement part for the same:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/eol_c51_574038.html
WS-X4424-GB-RJ45
Catalyst 4500 24-port 10/100/1000 Module (RJ45)
Replacement-PartWS-X4548-GB-RJ45
Catalyst 4500 Enhanced 48-Port 10/100/1000 Base-T (RJ-45)
HTH
Regards
Inayath
***** Plz rate all usefull posts.

Powering APs from a 2911 with PoE switch module

Good Morning everyone!
I am hoping someone can shed some light on an issue I am having at a client site.
Client has purchased a 2911 ISR and an 8 port switch module with PoE card with the intention of running 4 2602i access points being managed by a 2504 WLC on the same switch card.
Problem we have is that the APs come up but do not power up radios or cleanair. If I plug an AP into switch port 0/0 it comes up and works fine but not on any of the other ports. We saw this on a separate router, (they are doing the same setup to two sites), yesterday. That's why I was called in, as they could only get one AP working at a time.
I believed this was a faulty poe card as it looks as though the APs are just not getting enough power and are placing the radios into RESET mode. Moved to the other ISR and everything worked fine, left it running overnight came in and all was fine and dandy.
As the other router had only a basic config on we did the config which involved some ACLs and a few port configurations but nothing on the switch card and nothing pertaining to power. I am a wireless guy, not a router specialist so am a bit stymied. Sometime later we noticed that all of the APs had all radios in RESET state.
Next I wiped the config on the ISR and rebooted everything and everything came up fine so points towards not a hardware issue but configuration.
Where should I be looking?
I can't paste a full running config due to client constraints but if someone could point me in the direction I can clean parts of the config for sharing...

I believed this was a faulty poe card as it looks as though the APs are just not getting enough power and are placing the radios into RESET mode.
I haven't played with those modules for a long time, but what do you get when you run the command "sh power inline"?
2600 APs require a minimum of 15.4w PoE but the recommended is 20.0w PoE.

Configuring - Cisco 2921 with Switch Module/POE PS and 3750-x 24 port switch

This is what I have
- Cisco 2921 router
         with SM-ES2-24-P switch module and
                 POE power supply
-Cisco 3750x- 24 port Switch
I have port G1/0 (which connects to 24p Switch Module port g0/26 logically) configured with 3 sub interfaces (management, User and VOIP)
I want to connect 3750x to G0/1 on 2921 via fiber GBIC but want to use same three VLANs
I can not daisy chain 3750x via the switch module because it does not have fiber port.
I do not want to create another routed (g0/1) interface because I want to keep Users on both switches on the same subnet without further splitting the subnet in two.
I hope I am not making this confusing.
How can I bridge g1/0 and g0/1 so I can pass vlan traffic between two switches?
Second problem i have is ...
I have a VOIP connected to switch module (SM) and it is not getting any power.
I went in to all the interfaces on SM and issued power inline auto command
On the SM (sh power inline) - available is 0.0(w)
on the 2921 (sh power inline)
   - power supply status is good,
   - maximun power available is 280.
   - interface G1/0( which connects to SM)
      *device is unknown
      * powered off
     * allocated 0.0 watts.
I already tried resetting SM
Is there any other command I need to issue?
thanks for your help.

I'm having a similar issue. I can get trunked connectivity between the switch module and the router if I put the IP address on the router sub interface, but not if I put it on a VLAN interface. I was hoping to have it on a VLAN sub interface on the router so I could use Gig0/1 and Gig0/2 to connect other switches and have them on the same VLANs. I'm using Gig1/0 on the router side and Gig0/51 on the switch side (48-port module).
Any help? Am I on the wrong track altogether?

Ctrl-Alt shortcuts to switch modules not working

I'm having trouble with LR 4.1 (Win 7 64 bit) recognizing keyboard input properly. Sometimes it just stops "seeing" ctrl-alt-n (where n=1, 2, 3...) to switch between modules (Library, Develop, etc.). I can do everything else with the keyboard (Tab to show/hide panels, rate, keyword, etc.), but it just doesn't recognize the module shortcuts (or the arrow key versions to move to next/previous). I can change modules with the mouse, but I'd prefer to use keyboard shortcuts. This is a US keyboard on an English-language system. Anyone else experiencing this issue?

Nope, can't say it's happened to me. But I tend to use "d" for develop, or "g" (or "e") for Library.
Could it be that your numeric lock got toggled somehow? What number keys are you using (keypad, or top row)?
Hal

LR switching modules on me

Similar Messages

Maybe you are looking for