LR was unable to export the catalog's previews and negatives

My first posting in this forum. I want to remove everything from my iMac in order to upgrade from Tiger to Snow Leopard, then reload back. First job is to 'Export as Catalog' all my pics (around 6000) from the Mac to an external hard drive (Maxtor One Touch 4Plus, 450 GB available). I've tried 6 or 7 times and every time get a similar message - see Subject line. I've deleted unnecessary folders, gotten rid of unused keywords, and exported 2000 odd of my earlier photos as JPEGS to archive to reduce the volume. I've reloaded LR and updated to 2.6. And in the Export dialogue box I've ticked 'Export Negative Files' and 'Include Available Previews'. The export gets to about three quarters of the way through each time before I get the error message and I have to abort.
Appreciate any assistance.
Raymond
Melbourne, Australia

Is ALL PHOTOS included in your LR folder hierarchy? If it is not, then you need to right-click (or whatever the Mac equivalent is) on one of the folders in your LR hierarchy, and choose Include Parent Folder. Once you've done that, and copied everything over, you can just Locate Missing Folder on that one top folder and it'll find everything underneath it. If you don't have the parent folder in LR before you copy, you'd have to do Locate Missing Folder on each of the top-level folders.
Once you've copied your photos over, you can rename your local copy of ALL PHOTOS to make sure you're not accidentally finding it, then do the Locate Missing Folder to make sure it works on the Remote Location.
Once you're satisfied your catalog is seeing all the remote photos, and when you're ready, copy your catalog and your previews and backup folders over, and rename the local copy of the Lightroom so you won't accidentally open that copy of the catalog, again. I would copy things, instead of moving them, in case something happens you can start over.
If you are going to immediately upgrade your mac, then copy all three folder, other than the iChat ones, from Pictures to your remote drive and open the remote catalog and find missing folders all in one shot. I suggest doing only the photos, first, in case you want to continue working on the photos, the local copy of the catalog will be faster, but if you're ready to upgrade then just do all the copies at once. The ALL PHOTOS and the previews will be the time-consuming copies, the catalog, itself, won't take very long.

Similar Messages

Lightroom was unable to optimize the catalog - Error Since Loading v1.3

I just installed Lightroom v1.3 over Lightroom v1.2. Since then, I have been unable to optimize the catalog. When I try, it looks like it is working for a while, and then gives me this message. 'Lightroom was unable to optimize the catalog and must quit. The next time you run Lightroom, it will check the catalog for problems."
I have tried multiple times to restart Lightroom and Windows and reoptimize, but same message. I tried with a two week old catalog file, but still get the message. I uninstalled v1.3 and reloaded v1.2 and tried with the current catalog file and with older catalog files, still get message.
Lightroom v1.2 and v1.3 runs, but I have noticed things running slower with v1.3 and I have to restart more often due to Lightroom slowdown. I need to be able to optimize to keep things running as fast as possible.
Lightroom Catalog.lrcat is 1.3 GB
Approximately 75,000 images
Windows XP Profession Service Pack 2
Pentium 4 2.80GHz
2GB RAM
Normally, I back up the database 2-5 times a week and optimize the DB 3-6 times a week, along with keeping the hard drive defragged.

Is your machine maxing out during these times? My guess is it's got 10-50,000 left photos to update to v 1.3. It may be not a good thing to switch between the two versions. Until more definitive answers can be found, perhaps running a new catalog for new work might be a good plan, using only v 1.3.

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

Unable to export the SiteCatalyst Reports to FTP?

Hi Team,
This is the first time I'm using this... I was trying to export the SiteCatalyst Reports via FTP option...
Below are the steps that I have followed..
- Browse to Adobe Marketing Cloud -> Analytics -> Reports & Analytics
- Custom Reports -> ExternalUserHits
- Click on Send Button ->
         Format: Excel / CSV
         Advanced Delivery Options -> Selected FTP instead of Email
            Given our FTP Server (Our organization FTP Server) details with Host Name / port #/ Directory (tried with existing directory too) / User Name / password,
The report has been sent through email as failed to upload to the FTP server .. Below is the error message
        Error Message :We were unable to upload your report via FTP due to the following error:
                     Failed to create provided directory
I had given the existing directory in the FTP details section but still it has thrown the above error message
I have tried with Datawarehouse option too but nothing has been uploaded to my FTP server..
Please help me..
Note: I was able to generate the reports and send through email...
Thanks in Advance,
Deeepa

Hi Deeepa,
I believe you are confusing Business Catalyst (http://businesscatalyst.com) with Site Catalyst (https://sitecatalyst.omniture.com) which are two different products.
I'll move this thread to the proper channel to help assist you further.
Please revert your query to the following thread below instead.
- http://help-forums.adobe.com/content/adobeforums/en/analytics-forum/adobe-analytics.html
Kind regards,
-Sidney

Hi I'm getting Lightoom error when trying to edit in Nik Software "Lightroom was unable to prepare the selected file at /Volumes/Portable C/Kite Skating nikon/_DHT9654.NEF for editing. It will not be opened.

Lightroom was unable to prepare the selected file at
/Volumes/Portable C/Kite Skating nikon/_DHT9654.NEF for editing.
It will not be opened.
what does this mean? can anyone help?

Yes it is on a portable drive yet I have already worked with it and exported it as a jpg. The problem arises whenever I try to edit in the plug-ins from Nik software...this just happened recently as it never happened before...for years?

The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.

We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?

Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A.

Mainstage Was unable to complete the download world music loops

Ok, so I have bought Mainstage 2.2 from the app Store, and have almost downloaded all the additional content.
However, the only pack that will not complete it the World Music Apple Loops.
I immediately get the message, Mainstage was unable to complete the download.
There is no attempt to download this pack.
Any suggestions? I don't really want to uninstall and download 20Gb again.
Cheers

More disk space than I can shake a stick at, very stable internet connection, speedtest shows ping <18ms etc. The main reason for purchasing mainstage is for the loops and instruments, at £20 that's a bargain, but only if I can get the application to download the last package.
Wireshark shows that the server is rejecting the request from MainStage as a HTTP/1.1 416 Requested Range Not Satisfiable.
Looks like either a MainStage Application issue requesting the HTTP GET command or the Server not servicing that request.
Apple over to you!

Hi. My new computer had Acrobat on it. Suddenly, I was unable to open any PDF's. and then I tried to update and was forwarded to the Adobe site that said I had to buy a monthly subscription. I do not have the physical box with a serial number and was

Hi. My new computer had Acrobat on it. Suddenly, I was unable to open any PDF's. and then I tried to update and was forwarded to the Adobe site that said I had to buy a monthly subscription. I do not have the physical box with a serial number and was going to buy the one advertised on the website until I discovered it's only for students and teachers, which I am not. What should I do next as I need to use PDFs on a daily basis. Thanks! I would like to be able to download this and pay online. Possible? I currently have Adobe Acrobat XI Pro. I have a Windows 7 system. Please help!

As long as you know your serial number you can download PSE from here:
Download Photoshop Elements products | 11, 10
If you don't know your serial number:
Find your serial number quickly

The server was unable to load the SSL provider library needed to log in

Hello All,
When I am trying to login to my default SQL 2008R2 SP2 instance in windows 2003 server via ssms, I am getting the below error
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
When I looked into the error log and i could see lot of these messages.
The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books
Online for information on this error message: 14 Not enough storage is available to complete this operation.
Force protocol encryption is set to off.
I am not sure what is the underlying problem. server's total RAM is 4 Gb and max_server_memory is set to 2 GB. CPU utilization is very normal at the time of issue.
I restarted the SQL service and i am able to connect to the instance, but the issue is repeating and i need to find a permanent fix.
Thanks

I could also see the below in error log some time before i get the above alert
Error: 701, Severity: 17, State: 123.
There is insufficient system memory in resource pool 'internal' to run this query
then after sometime flurry of alerts
The server was unable to load the SSL provider library
needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message: 14 Not enough storage
is available to complete this operation.
Thanks

The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.

Hi Guys,
I am creating the library using object model with custom content type. When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
Document Information Panel cannot open a new form.
The form contains schema validation errors.
Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
But after saving the document, then meta data is enabled.
Thanks in advance for suggested solutions.
thanks
Santhosh G

Hi,
For a better troubleshooting, I suggest to do as follows:
1. Please try to update the Location column's schema by following the steps below.
1) Go to Site Settings -> "Site Columns"
2) Click on "Location", after the page is opened. Don't modify any settings, click "OK" to forcibly update the field's schema.
2. Re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
3. Here are some similar links about your issue, please take some time to look at them:
http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
More information:
SharePoint 2010: Creating a Custom Content Type using Visual Studio
http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

Is this on a Windows XP, Vista or 7 system?

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

Error while creating task: The server was unable to save the form at this time. Please try again. (SharePoint 2013)

I get the following error while saving a task inside task list:
"The server was unable to save the form at this time. Please try again."
I tried restarting "search service host controller".
The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
How do I find information on the exact problem that is causing the error? What are possible solutions?

Hi robikshrestha,
This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
in your situation?
Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
log and ULS log, see whether there is related information.
If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
Thanks,
Qiao Wei
TechNet Community Support

LR was unable to export the catalog's previews and negatives

Similar Messages

Maybe you are looking for