LR1.3 Export post processing command did not work
Exported jpegs to folder on desktop. Everything worked nicely except the command in the Post-processing box to open files in PSCS3 did not execute. Any comments or explanations? Thanks in advance for your help.
Scott
scottbjones wrote:
> Exported jpegs to folder on desktop. Everything worked nicely except the
> command in the Post-processing box to open files in PSCS3 did not
> execute. Any comments or explanations? Thanks in advance for your help.
In most cases the length of the command line exceeds the maximum length.
Try using a very short output directory name like C:\Out. Note that this
applies to Windows, I'm not sure how this works on a Mac.
Kees de Bruin
"A vacation is having nothing to do and all day to do it in"
Similar Messages
-
Cannot print anything from internet using Firefox as browser. Please advise. I have to use Firefox for internet college courses, cannot print my assignments. I do not have this problem on Mac or using Internet Explorer. Only happens when using Firefox. When I select print a message comes up to save information to desktop as .xps file. Select save, sometimes it is on the desktop but I cannot open the file or it simply does not save file and get an error message that print command failed. What is happening?
{Ctrl + P} and select your printer in the Printer - Name box near the top of that window.
http://kb.mozillazine.org/Problems_printing_web_pages -
Wish to post KeyNote file as pdf. Export from KN to iW not working
Wish to post KeyNote file as pdf. Export from KN to iW not working - get blank screen. Tried to upload PDF to mobile me and link to that file - also didn't work. I'm not familiar with iFrames but have read about them in this forum - is that my only option? Why wouldn't a KN export work?
Thanks, BrianI have just tried this with a test site and publishing to a folder and it does work perfectly for me.
I had a Keynote document already so all I did was click on File and then selected the Print option. I then selected the save as pdf option the the pdf document was created on my desktop instantly.
All I then did was open iWeb and type some words in a text box My Prices. I then highlighted My Prices and opened the Inspector and went to Hyperlink and clicked on the option Hyperlink to a file. I then selected the pdf file from my desktop.
I then used ftp to a folder on my desktop and when I opened the appropriate page, I click on the words My Prices and the pdf file opened straight away.
As OT has suggested, check that you have linked to the correct file. If it does not work, either you have not created the pdf correctly or at all or you have not linked to the correct file.
As I said, it worked for me. -
Does anyone know why export to audio disappear from menu in 64bit mode?
Why detect cuts command is not working well in 64 bit mode?
I tested on several machines (brand-new iMac, brand-new MacPro with 10.8 OS, MacPro with 10.6.8),and everythig wotks in 32 bit mode. As I switch to 64 bit mode detect cuts only put one marker at the begening of film.
I also noticed that Firewire output option in 64bit mode is not avaible.
Is there a certain film format that I have to use to make it work? I tried DV PAL, but I had ther same result.
Thanks a lot.Hi
Those functions are not available when Logic is running in 64bit mode
http://support.apple.com/kb/TS3171
CCT -
I tried to inport a bookmark html which was exported from Google Chrome. but it did not work
I exported the file from Google Chrome and tried to import it into Firefox as advised using FireFox help
It Did not work
Help!
vcoli26Try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
RAC instance won't start: ORA-00443: background process "VKRM" did not star
I've logged a SR with Oracle, but while waiting for response from them...I'm stumped I can't find more out here about this article.
On Oracle knowledgebase...any search for VKRM, gives about the same 3 articles relating to RDA (Remote Diagnostic Assistant).
Not sure what went on here.
I have a 5 node RAC cluster. All other instances seem to be running just fine.
On one instance...some applications were getting an error like:
ORA-01033: ORACLE initialization or shutdown in progress
I looked in GRID...and it indicated that only two of the 5 nodes had this instance running...which was strange in that with srvctl, it showed ll 5 up and running:
[oracle@server2 bin]$ ./srvctl status database -d INSTANCE
Instance INSTANCE1 is running on node server1
Instance INSTANCE2 is running on node server2
Instance INSTANCE3 is running on node server3
Instance INSTNANCE4 is running on node server4
Instance INSTANCE5 is running on node server5
Anyway, thought I'd poke around. I started with trying to get srvctl to stop instance #2...in GRID it seemed that instance 2,4 and 5 weren't working.
srvctl stop instance -D INSTANCE -i INSTANCE2
This just hung...
I thought I'd cycle all the nodes...so, did a ctl-c out of that one, and did:
[oracle@server2 bin]$ ./srvctl stop database -d INSTANCE -o abort
PRCD-1124 : Failed to stop database INSTANCE and its services
PRCR-1065 : Failed to stop resource (((((NAME STARTS_WITH ora.instance.) && (NAME ENDS_WITH .svc)) && (TYPE == ora.service.type)) && ((STATE != OFFLINE) || (TARGET != OFFLINE))) || (((NAME == ora.instance.db) && (TYPE == ora.database.type)) && (STATE != OFFLINE)))
CRS-2675: Stop of 'ora.instance.db' on 'server5' failed
CRS-2675: Stop of 'ora.instance.db' on 'server4' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
The ORA-01034 messages repeats a number of times...and the one with server4 and server5 repeated again too.
I also got this:
CRS-2680: Clean of 'ora.instance.db' on 'server2' failed
CRS-2675: Stop of 'ora.instance.db' on 'server5' failed
CRS-2675: Stop of 'ora.instance.db' on 'server4' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
I get similar messages when I try to restart.
clusters seem to be up, and other instances seem to be ok
Looking at alert log...I found some strangeness in the traces
Starting background process VKRM
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_dbrm_26982.trc:
ORA-00443: background process "VKRM" did not start
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_ora_27467.trc:
ORA-00450: background process '' did not start
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_ora_27467.trc:
ORA-00450: background process '' did not start
Error 450 happened during db open, shutting down database
USER (ospid: 27467): terminating the instance due to error 450
LGWR waiting for instance termination
Instance terminated by USER, pid = 27467
ORA-1092 signalled during: ALTER DATABASE OPEN...
opiodr aborting process unknown ospid (27467) as a result of ORA-1092
Looking at the trace listed above:
2011-05-09 12:17:18.305726 :84271119:db_trace:ksb.c@2157:ksbs1p_real(): [10254:6:464] KSBS1P: process DBRM trying to start background VKRM
2011-05-09 12:17:18.305729 :8427111A:db_trace:ksb.c@2220:ksbs1p_real(): [10254:6:464] KSBS1P: process DBRM obtained PR enqueue to start background VK
RM
2011-05-09 12:17:18.306021 :8427111D:db_trace:ksb.c@2354:ksbs1p_real(): [10254:6:464] KSBS1P: creation error posted OER(1089)
2011-05-09 12:17:18.306029 :8427111F:db_trace:ksb.c@2424:ksbs1p_real(): [10254:6:464] KSBS1P: out of loop: process did not start
Trace Bucket Dump End: default bucket for process 6 (osid: 26982, DBRM)
ORA-00443: background process "VKRM" did not start
kskdbrmpa: reply error 450
Any ideas? Again...I can't seem to find much of ANY information searching out there for the VKRM background process not starting...
Thanks in advance,
cayenne
Edited by: cayenne on May 9, 2011 11:34 AMAnyone? Anyone? Bueller?
Ok..have been on phone with Oracle support, and have them stumped so far.
I've checked..other instances are running (except one other that failed to cleanly shut down with srvctl and same error messages).
I've check...ASM is running on all 5 nodes. I've used crsctl to check CRS on all nodes..clustering seems ok.
Memory while somewhat high...should have enough room...the system has never complained before, and this has been up on this config for over a year.
I was able on node one...to fire up the first nodes instance using the pfile there...it came up. I started it restrict..and promptly ran a datapump export, and then shut back down.
While Oracle support is going through logs and trace files I sent...I've got another 11Gr2 environment (3 node RAC) I've been using as a test environment...and am recreated the instance there temporarily to allow my developers to test and get past the upcoming deadline.
But, I'm still puzzled as to the solution on the main cluster. This seem to be normal, except these two instances....
any ideas on where and what to look for?
cayenne -
External command is not working in File Receiver Adapter
Hi,
I have tried to copy the file which is mentioned in my File Adapter (Receiver) to 3 different folders thru OS command. The purpose is to save time. I have created one CC for Source(File) and one CC for target(File). After the target file is created, I want to copy this file in 3 folders. For this I have written one batch file in my system.
File Name: copy1.bat
@ECHO OFF
COPY %1 C:\TEST1\arch_t1
COPY %1 C:\TEST2\arch_t2
COPY %1 C:\TEST3\arch_t3
DEL %1
The command which I entered in the Receiver CC (File Adatper is)
Run Operating System Command After Message Processing
Command Line: C:\FILES\copy1.bat %F %f
Timeout(secs): 60
Terminate Program After Timeout - Check box is selected.
But, this external command is not working. (because the target files are not created in those directories C:\TEST1, C:\TEST2, C:\TEST3)
I did this scenario by refering the Michael'w weblog:
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
In this blog, he has also given how to troubleshoot external command. I tried this also. It is not working.
I use Windows XP OS. XI 3.0 SP 18.
Friends, Could you kindly tell why this external command is not working? What could be the problem?
Thanks in advance.
Kind Regards,
Jeg P.Hi, Jeg.
As the note says, please check the java Runtime.exec behavior
with the proper user.
If in doubt, check if the command can be successfully run through
the Java Runtime.exec(...) API. Also note that the command is run
as user "<sid>adm" (Unix) / "SAPService<SID>" (Windows).
So, Could you check the following(very dirty one!) Java in your
XI server and check if it works? For simulating %F, create a test
file C:\FILES\test.txt whatever the content is.
import java.util.*;
import java.io.*;
public class ExecJava {
public static void main(String args[]) {
try {
Runtime rt = Runtime.getRuntime();
Process proc = rt.exec("C:/FILES/copy1.bat C:
FILES
test.txt");
} catch (Exception e) {
e.printStackTrace();
Good Luck.
Sejoon -
DBMS_DATAPUMP parallel parameter did not work
Hi, I am using DBMS_DATADUMP with network link to load large table directly from one database to another database. I used parallel parameter to improve the performance. But looks the parallel did not work. Still only one worker to handle the import.
The status is
Job: LOADING
Owner: TRI
Operation: IMPORT
Creator Privs: TRUE
GUID: 25DB4B2BE420406B82A7AE159CF1E626
Start Time: Wednesday, 22 April, 2009 15:37:04
Mode: TABLE
Instance: orcl
Max Parallelism: 4
EXPORT Job Parameters:
IMPORT Job Parameters:
Parameter Name Parameter Value:
INCLUDE_METADATA 0
TABLE_EXISTS_ACTION TRUNCATE
State: EXECUTING
Bytes Processed: 0
Current Parallelism: 4
Job Error Count: 0
Worker 1 Status:
Process Name: DW01
State: EXECUTING
Object Schema: TRI
Object Name: ORDER_LINES
Object Type: TABLE_EXPORT/TABLE/TABLE_DATA
Completed Objects: 1
Total Objects: 1
Worker Parallelism: 1
Worker 2 Status:
Process Name: DW02
State: WORK WAITING
My source database is 10.2.0.4 compatible=10.2.0
target database is 11.1.0.6
My table is around 3G
The API I am using is
my_handle := dbms_datapump.open(operation => 'IMPORT',job_mode => 'TABLE',
remote_link => my_db_link, job_name => my_job_name ,version=>'LATEST' ) ;
dbms_datapump.set_parameter (my_handle, 'TABLE_EXISTS_ACTION','TRUNCATE');
dbms_datapump.set_parameter (my_handle, 'INCLUDE_METADATA',0);
dbms_datapump.metadata_filter (handle => my_handle, name => 'SCHEMA_EXPR',
value=>'IN (''ORDER'')');
dbms_datapump.metadata_filter (handle => my_handle, name => 'NAME_LIST',
value => '''ORDER_LINES''');
dbms_datapump.metadata_remap(my_handle,'REMAP_SCHEMA',old_value=>'ORDER',value=>'TRI');
dbms_datapump.set_parallel(my_handle,16);
dbms_datapump.start_job(my_handle);
Edited by: tonym on Apr 23, 2009 10:49 AMThen I test to use API and network link to export large table from remote database with parallel parameter.
my_handle := dbms_datapump.open(operation => 'EXPORT',job_mode => 'TABLE',remote_link => my_db_link, job_name => my_job_name ,version=>'LATEST' ) ;
DBMS_DATAPUMP.add_file( handle => my_handle, filename => 'test1.dmp', directory => 'DATA_PUMP_DIR');
DBMS_DATAPUMP.add_file( handle => my_handle, filename => 'test2.dmp', directory => 'DATA_PUMP_DIR');
DBMS_DATAPUMP.add_file( handle => my_handle, filename => 'test3.dmp', directory => 'DATA_PUMP_DIR');
DBMS_DATAPUMP.add_file( handle => my_handle, filename => 'test4.dmp', directory => 'DATA_PUMP_DIR');
dbms_datapump.metadata_filter (handle => my_handle, name => 'SCHEMA_EXPR',value=>'IN (''INVENTORY'')');
dbms_datapump.metadata_filter (handle => my_handle, name => 'NAME_LIST',value => '''INV_TRANSACTIONS''');
dbms_datapump.set_parallel(my_handle,4);
dbms_datapump.start_job(my_handle);
Looks it did not use parallel either. This table is around 3G too.
status:
Job: LOADING_2
Operation: EXPORT
Mode: TABLE
State: EXECUTING
Bytes Processed: 0
Current Parallelism: 4
Job Error Count: 0
Dump File: C:\ORACLE\ADMIN\OW\DPDUMP\TEST1.DMP
bytes written: 69,632
Dump File: C:\ORACLE\ADMIN\OW\DPDUMP\TEST2.DMP
bytes written: 4,096
Dump File: C:\ORACLE\ADMIN\OW\DPDUMP\TEST3.DMP
bytes written: 4,096
Dump File: C:\ORACLE\ADMIN\OW\DPDUMP\TEST4.DMP
bytes written: 4,096
Worker 1 Status:
Process Name: DW04
State: WORK WAITING
Worker 2 Status:
Process Name: DW05
State: EXECUTING
Object Schema: INVENTORY
Object Name: INV_TRANSACTIONS
Object Type: TABLE_EXPORT/TABLE/TABLE_DATA
Completed Objects: 1
Total Objects: 1
Completed Rows: 4,652,330
Worker Parallelism: 1
Edited by: tonym on Apr 23, 2009 10:53 AM -
Broadband did not work for days
my broadband did not work for days. I spent two lengthy periods of time on the phone to sky, once fo 1.5 hrs and the other time for 1 hour. Both phone calls achieved nothing. Eventually the internet started working again. The sky service status online advised that my area had no problems. The service from sky has been incredibly rubbish and has made me very angry. In order to get myself online i had to pay BT Wifi £8 for a day pass. Sky have been very generous and have compensated me 62 pence for the time I have been without the internet. My question to sky is..... will youplease refund me the £8 I have spent and give me some sort of compensation for the dismal service provided. I have tried to call calling you this morning but you phone is engaged, I tired emailin gyou but you have no email, I tried the live chat, but it is busy. The forum is the only place I can go.
Sky don't post here and won't respond to you here. The forum is customer to customer support only.
Official complaints process as below:
http://help.sky.com/articles/how-to-make-a-complaint
Sky are under no obligation to compensate you for the loss of service and the 62p is, I assume, the cost of your package for the days it was not working. -
I just imported 70 photos successfully, edited them, and then attempted to upload them to a Facebook album. It did not work and got hung up, so I force quit IPhoto and was going to try again. The 70 photos have DISAPPEARED!! Help !!!!
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
DCM command did not complete successfully (-8)
Hello,
I am new to deploying web applications to OracleAS. They deploy fine to the local OC4J instance but when deploying to the application server I am getting an error. Any assistance would be greatly appreciated.
I have been trying to track down what this error means: DCM command did not complete successfully (-8)
I've posted my deployment log below. Thank you in advance for your time.
Regards,
- Justin
---- Deployment started. ---- Dec 18, 2006 9:19:11 AM
Target platform is Oracle Application Server 10g 10.1.2 (Unix) (AORA01D).
The WAR file is already up to date: /home/jtissera/work/WISER/Reports/code/ViewController/deploy/wiserReports.war
Wrote EAR file to /home/jtissera/work/WISER/Reports/code/ViewController/deploy/wiserReports.ear
Invoking DCM servlet client...
/usr/lib/jvm/java-1.5.0-sun-1.5.0.06/jre/bin/java -Djava.protocol.handler.pkgs=HTTPClient -jar /home/jtissera/dev/jdevstudiobase10131.zip_FILES/jdev/lib/oc4j_remote_deploy.jar http://aora01d.guhsd.net:1156/Oc4jDcmServletAPI/ ias_admin **** redeploy /home/oracle/OraHome_3 /home/jtissera/work/WISER/Reports/code/ViewController/deploy/wiserReports.ear wiserReports GUHSD
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy /home/oracle/OraHome_3 /home/jtissera/work/WISER/Reports/code/ViewController/deploy/wiserReports.ear wiserReports GUHSD
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = c0a802364840a5256682f8c47229750d637e5635491
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c0a802364840a5256682f8c47229750d637e5635491
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (-8)
#### HTTP return code was -8
Exit status of DCM servlet client: 248
Elapsed time for deployment: 22 seconds
#### Deployment incomplete. #### Dec 18, 2006 9:19:32 AMHere is one possible solution for that -8 code
I had everything up and runnig running. Deploy was working fine.
Then for some reason, I opened one of the deployed file on the server using the text editor. That file remained open, as I then started deploying the app from my Jdev to the server. I started getting this -8 error code.
Not knowing what went wrong, I noticed the file on the server open in the text editor. So closed that open server file --- closed that editor and deployed app again from Jdev. AND It worked !!!
Hope this helps.
pp -
I recently tried to burn some photos on a CD. For some reason, It did not work. Now I have a .fpbf folder on my desktop. I can't seem to get rid of it. I tried dragging it to the trash, but then I get a box asking my to type my password it, so Finder can make the changes. Doing so, does nothing at all. And when I try to burn another CD from the same .fpbf file, I get a the following message: "There are 35 items that can’t be burned because the original items can’t be found. Skip the items and continue burning?". When I skip and continue burning, nothing shows up on the CD. In the meantime, the .fpbf folder is still in my desktop. I tried changing the aliases on each pic, but it still doesn't work. Any ideas of how I can remove this folder from my desktop?
Thank you.Beavis2084,
Thank you for your detailed explanation but something is seriously wrong with my computer. Although the method you have described is very similar to the one I tried in step 2 from my second post, I have since "done things" which may have complicated matters—or suggests that my computer has a more serious problem.
Here's what I did:
1). Installed Onyx and discovered that I had a .plist file (com.apple.iphotomosaic.plist) that was causing a Syntax error: "Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header, if XML." After doing some research online, I was given the understanding that downloading the iLife update 9.0.3 (I installed the more recent version, 9.0.4) would solve this problem because it would also fix some system issues. So, I downloaded it...and when it didn't solve the problem, I decided to just deleted that .plist file.
2). I read your knew post and decided to follow your directions, even though I realized they were basically the same steps I followed in the 2nd method I mentioned earlier. I say "basically" because, for some reason, after inserting a blank disc, my computer does not open the disc in the Finder. Instead, it places the blank disc's image on the Desktop, even though the Finder's Preferences and the System's Preferences are set to have it open in the Finder—nothing should be on my Desktop! (Note: When transferring the items (all folders) I want to burn to the blank disc, I did not use the Option-Click-Drag method as before, I used the Click-Drag method, which created the curved arrow in the lower left corner of each item.)
Now, for the result of "method 2," the method we basically have in common, the computer goes through the burn stage but, in the verify stage, tells me that it is unable to verify the disk, suggests that my DVD may be unreliable and that I should try another disc, and then tells me about some "fork" (?) error (-43).
I don't know what to do anymore... -
I attempted to perform the itunes update on two different PCs. Itunes will no longer open and prompted me to reinstall itunes. The reinstall did not work after several attempts and I received an error: "Runtime error R6034. An application has made an attempt to load the C Runtime library incorrectly. Please contact the application's support team for more information." Has anyone else had this issue? How can I resolve it?
I've been having the same exact problem this morning, and from the looks of it a lot of other people are posting about this issue, so I don't know if it's maybe something wrong with the download but I'm just relieved that it seems to be that instead of a corruption issue with my windows installation. I'm just wondering how long this will take to be resolved.
-
I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update serverTry this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
I did the following: mount -uw / rm/var/db/.AppleSetupDone shutdown/uses/us reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda MarkleYou did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see:
Reset a Mac OS X 10.7 Lion Password
OS X Mountain Lion- Reset a login password,
OS X Mavericks- Solve password problems,
OS X Lion- Apple ID can be used to reset your user account password.
Maybe you are looking for
-
PO Document Type Without Good Reciept and Invoice Reciept
Hi All, Can i configure my document type in such a way that it do not require Goods Receipt as well as Invoice Verification. I know i can do the same with Account assignment category. But what if i am not using any particular account assignment categ
-
Is IP over Firewire reliable?
Hello everyone! I was wondering if anybody is using IP over Firewire for mission-critical jobs such as a bastion host in a firewall. What I would like to be able to do is use the Firewire port on a Mac mini as a second network interface so I can use
-
I have a discolored strip the right side of my mac book screen
I HAVE A DISCOLORED STRIP ON THE RIGHT Side OF MY MAC BOOK SCREEN
-
Can I use a time capsule in place of mac mini?
Can I use a time capsule in place of mac mini as a backup storage?
-
Program Running from Long Time
Hi Friends, There is a program running from long time. Can anybody let me know how can i analyse this program other than SM50, SM51, SM66. Its a CRM Program.....there are no logs....... Points will be rewarded.... Thanks, Nagesh.