LR1.3 - new ICCs not showing up in Custom Profile popup list

I've copied some new ICC files into the /Library/ColorSync/Profiles directory (on an IMac OS 10.4.11), but when I try to choose one, they are not in the Custom Profile popup list. I have tried renaming an existing one that was showing up and the old name shows up in the popup list, even after a re-boot.
Is there a separate process to help LR "see" the ICCs I've added to the Profiles directory?

1st: Upgrade to 1.4.1. It's free and far better.
Lightroom does not recognize CMYK printer profiles, only RGB ones, so that could be your problem. The name you see in the popup is not the filename but is taken from data internal to the file.

Similar Messages

Camera new d810 not showing pix up in raw files in elements 11

camera new d810 not showing pix up in raw files in elements 11 and lightroom 4

DNGC 8.7 can be found, here: http://www.adobe.com/downloads/updates/
You can purchase upgrades to LR and/or PSE, here:
http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html

I've downloaded a TV show for my ipod classic, it shows up on my PC ipod librargy but it does not show up on my Ipod play list

I've recently downloaded a 3 TV shows from the Itunes store onto my Ipod classic. It shows up on my PC Itunes playlist, andI can play it on my pc but will not show up on my Ipod play list. I've searched all of the directories and can't see it there.
I have plenty of space on the drive so that's not the issue.

I think the issue may be that these TV shows are in HD. Would that keep them from playing?
Yes. Sounds like you are trying to sync the HD version of the TV Episode. You should try to download the Standard Definition copy instead and sync that to your device as HD content is not compatible with the Nano. See here for more information:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
To prevent HD versions from being downloaded in the future head to the iTunes Store, click the Purchased link, and then select TV Shows and remove the tick mark next to Download HD when available. You should be able to download the SD version now from under this same page.
B-rock

My iPod will not show up in the Itunes device list plus I get an error message

Hello!
My iPod will not show up in the Itunes device list plus I get an error message
" One or more devices is getting too much power from the USB wire" or sumptin like that.
I've tried this with two wires, so the problem is not there.
I reseted the iPod to factory settings but it didn't help.
Anyone??

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another USB port and computer
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My ipod touch does not show up in my itunes source list, and shows up as a digital camera in "My Computer". Any ideas?

My ipod touch does not show up in my itunes source list, and shows up as a digital camera in "My Computer". Any ideas?

Start here. Is ti normal and expected for the computer to also see the iPod as a comera since that is how you get saved photos from the iPod to the computer.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

New Songs Not Showing Up on Apple TV, Apple TV not in iTunes Sidebar

I have a first-generation Apple TV. I'm able to see my library of music fine, but new additions are not showing up. I've gone into iTunes to try and sync it, but the Apple TV is no longer appearing under devices. I went ahead and turned on Home Sharing, which I did not need before, and Apple TV showed up under Devices, but STILL, my new music additions were not appearing on the Apple TV and there is no Sync option. I turned off Home Sharing and the Apple TV disappeared from the iTunes sidebar. Where do I go from here?

Are the files in the library?
I notice that music and movie categories exist, and I can watch the movies I have converted using handbrake, and iMovie for home movies that we're added to my iTunes library....but... I want to sort this into kid movies, parent movies, and home video categories. Apple TV will be so much more useful if I don't have to use my iPad to air play my home movies. Browsing a single list of video that includes these 3 distinct functional categories is pretty lame. Where is my apple freedom here?
I expect this fixed or more easily configured with the new Yosemite and iOS update. I hope there is an Apple TV update to make this better too.

Creating new track - software catalog new product not showing up - Help!!!

Hi,
Creating a new track for custom development.
A new product has been added in the software catalog in SLD.
SLD and NWDI (netweaver 04) are on the same system.
The new product is not showing up when trying to select in the new track, Software Components for Development section. Why??
Does the server need to be restarted after adding a new product? This is difficult for us as SLD has production systems tied to it!!!
Thanks in advance
Regards, Neeta

Thanks - This did the trick. I have awarded points!!!!
Regards, Neeta

New users not showing up while trying to set folder permission settings

Server 2012
This is a new virtual domain server and file server in a starwind cluster, I just started migrating users last week.
This last weekend (two days ago) the cluster crashed while doing windows updates on this server. I have been unable to get it to download any updates since without crashing, not sure if that is related to this issue somehow.
I added some new users today and got them all logged in and their data transferred over. good. But then I went to this shared folder that everyone has a mapped drive too and tried to add them in the security tab of a sub folder but their accounts will not show
up when I search for them. Any account I added previously to last weekend show up, students, mine, etc.
even if I select the exact OU the accounts are located in, even if I type their whole name and domain. In AD the accounts are there.
If I log into the backup domain controller Their accounts show up there while in a folder security settings tab. They are listed in active directory on both domain controllers.
I have exhausted myself on Google search.
What the heck did I break?
Maybe I should run
DISM.exe /Online /Cleanup-image /Restorehealth
Not sure if I will lose any data doing that or what the repercussions would be..

Hi Dustin,
If the DC is having USN rollback issue, we can resolve it by demote then re-promote or restore the DC using a supported method such as using System State backup to restore.
More information for you:
USN Rollback, Virtualized DCs and improvements on Windows Server 2012
http://blogs.technet.com/b/reference_point/archive/2012/12/10/usn-rollback-virtualized-dcs-and-improvements-on-windows-server-2012.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

New HDD not showing in disk utility

Help please!
i can up on a broken G5 i have replaced the HDD. now i am trying to install tiger. but the new internal HDD is not showing up in disk utility.
i plugged my passport in and it popped right up.
some one please let me know what you think.

Well, having a had hard drive connected may cause a grey screen (if the system cannot successfully perform a check of connected devices). Not sure about the fan.
If you have not done so yet, be sure to try resetting PRAM
http://support.apple.com/kb/HT1379
If that does not help, you can also try resetting the SMU (power management).
http://support.apple.com/kb/HT1767
Follow the procedure precisely.
It is also possible that the old drive was not bad and your iMac has some other problem. Did you ever test the previous drive on another Mac (or connected externally) to confirm it was faulty? That +other problem+ may be what you are experiencing now.
Also, I asked this previously but, are you able to start up the iMac using the optical drive, with a Mac OS X installation disc in there?

New movie not showing up in iCloud

New movie "X-Men:Days of Future Past" not showing up in iCloud.
Thanks

If you haven't already tried, you might try going to System Preferences>iCloud, uncheck Documents & Data, restart your Mac then go back and check Documents & Data again. If this doesn't help, you might need to try resetting the iCloud Documents & Data service as explained here: iCloud: Resetting iCloud Documents & Data service.

New Field not Showing up in Report.

I have a CR query that I am editing to add a column to my report. When I make my edits, the query runs, but I do not see the new field in the field explorer. The part in purple is what I added. Do I need to add it elsewhere in the code?
WITH SEL_ACCTS AS(
SELECT
CASE WHEN RMSCUSTTYP = 'I' THEN
CASE WHEN Trim(TRIM(RMSLASTNM) || ', ' || TRIM(RMSFIRSTNM)) <> ',' THEN Trim(TRIM(RMSLASTNM) || ', ' || TRIM(RMSFIRSTNM))
ELSE ''
END
ELSE
RMSCMPNAME
END AS "DEBTOR NAME",
RMSACCTNUM AS "CLIENT ACCOUNT#",
case when RMSHOMEPHN = '' or RMSWORKPHN = '' or RMSFAXPHN = '' or RMSMOBLPHN = '' then 'Y' else 'N' end as skipplcmt,
A.RMSBILENUM,
RMSDATEASG AS PLC_DT,
ATTRNYCODE,
RMSGATECD As "Gate Code",
RAND() AS RANDNUMGEN
FROM
REPORTING.RMASTER As A
left join reporting.rcomker b
on a.rmsbilenum = b.rmsBilenum
WHERE
RMSDATEASG > REPLACE(CHAR(CURRENT DATE - 90 DAYS, ISO),'-','')
AND recordtype = 'D'
and ATTRNYCODE IN ({?AGCY_CODE})),
GET_ACCTS AS(
SELECT
"DEBTOR NAME",
"CLIENT ACCOUNT#",
Cast(Timestamp(plc_dt||'000000') As Date) AS "PLACED DATE",randnumgen,skipplcmt,
PLC_DT,
ATTRNYCODE,
A.RMSBILENUM
FROM
SEL_ACCTS AS A
LEFT JOIN
REPORTING.RPRDBAL AS B ON A.RMSBILENUM = B.RMSBILENUM
ORDER BY RANDNUMGEN
FETCH FIRST {?#_of_Accts} Rows Only),
GET_ACTV AS(
SELECT
G.*,
RMSTRANDTE,
ACTION_CODE,rmstrantim,
RESULT_CODE
From GET_ACCTS AS G LEFT JOIN RPTINGDATA.ROACTREACC AS R ON G.RMSBILENUM = R.RMSBILENUM AND G.ATTRNYCODE = R.ATTRNYCODE AND RMSTRANCDE = '9R'
    AND (ACTION_CODE IN('1','2','3','4','5','7','14','16','22','25','26','27','29','36','44','66') OR RESULT_CODE IN ('2','14','56','58','59','60','61','62','66')) AND RMSTRANDTE >= PLC_DT )
SELECT
"DEBTOR NAME",
"CLIENT ACCOUNT#",
"PLACED DATE",
PLC_DT,
ATTRNYCODE,
RMSBILENUM,skipplcmt,
MIN(CASE WHEN ACTION_CODE IN ('3','4','5','7','25','26','27','29')
    THEN Cast(Timestamp(rmstrandte||'000000') As Date)
    ELSE NULL END) AS FIRSTATTEMPT,
SUM(CASE WHEN ACTION_CODE IN ('3','4','5','7','25','26','27','29')
    THEN 1 END) AS ATTEMPT#,
SUM(CASE WHEN RESULT_CODE IN ('2','56','58','59','60','61','62','66')
    THEN 1 END) AS CONTACT#,
SUM(CASE WHEN RESULT_CODE = '14'
    THEN 1 END) AS PROMISE#,
MIN(CASE WHEN ACTION_CODE = '44'
    THEN Cast(Timestamp(rmstrandte||'000000') As Date)
    ELSE NULL END) AS FIRSTMGRRVW,
SUM(CASE WHEN ACTION_CODE = '44'
    THEN 1 END) as MANAGER#,
MIN(CASE WHEN ACTION_CODE = '1'
    THEN Cast(Timestamp(rmstrandte||'000000') As Date)
    ELSE NULL END) AS FIRSTLETTER,
MIN(CASE WHEN ACTION_CODE = '36'
    THEN Cast(Timestamp(rmstrandte||'000000') As Date)
    ELSE NULL END) AS FIRSTSCRUB,
max(CASE WHEN ACTION_CODE in ('1','2','14','16','22','66')
    then 'Y' else 'N' end) as locateacct,
sum(case WHEN ACTION_CODE IN ('3','4','5','7','25','26','27','29') and (rmstrantim between 80000 and 100000 or rmstrantim between 180000 and 210000) and ( DAYOFWEEK(DATE (
                    SUBSTR ( DIGITS (rmstrandte) , 1 , 4 ) || '-' ||
                    SUBSTR ( DIGITS (rmstrandte) , 5 , 2 ) || '-' ||
                    SUBSTR ( DIGITS (rmstrandte) , 7 , 2 ) )) in (1,7) ) then 1 else 0 end) as primecall,
FROM GET_ACTV
GROUP BY
"DEBTOR NAME",
"CLIENT ACCOUNT#",
"PLACED DATE",
PLC_DT,
ATTRNYCODE,
RMSBILENUM,skipplcmt

It's not showing up because it's only in the first With Select - it hasn't been brought down all the way through to the final Select. Here's how you need to change it;
WITH SEL_ACCTS AS(
        SELECT
          CASE WHEN RMSCUSTTYP = 'I' THEN
            CASE WHEN Trim(TRIM(RMSLASTNM) || ', ' || TRIM(RMSFIRSTNM)) <> ',' THEN Trim(TRIM(RMSLASTNM) || ', ' || TRIM(RMSFIRSTNM))
            ELSE ''
            END
          ELSE RMSCMPNAME
          END AS "DEBTOR NAME",
          RMSACCTNUM AS "CLIENT ACCOUNT#",
          case when RMSHOMEPHN = '' or RMSWORKPHN = '' or RMSFAXPHN = '' or RMSMOBLPHN = '' then 'Y' else 'N' end as skipplcmt,
          A.RMSBILENUM,
          RMSDATEASG AS PLC_DT,
          ATTRNYCODE,
          RMSGATECD as "Gate Code",
          RAND() AS RANDNUMGEN
        FROM REPORTING.RMASTER As A
          left join reporting.rcomker b on a.rmsbilenum = b.rmsBilenum
        WHERE RMSDATEASG > REPLACE(CHAR(CURRENT DATE - 90 DAYS, ISO),'-','')
          AND recordtype = 'D'
          and ATTRNYCODE IN ({?AGCY_CODE})),
GET_ACCTS AS(
        SELECT
          "DEBTOR NAME",
          "CLIENT ACCOUNT#",
          Cast(Timestamp(plc_dt||'000000') As Date) AS "PLACED DATE",randnumgen,skipplcmt,
          PLC_DT,
          ATTRNYCODE,
          A.RMSBILENUM,
         "Gate Code"
        FROM SEL_ACCTS AS A
          LEFT JOIN REPORTING.RPRDBAL AS B ON A.RMSBILENUM = B.RMSBILENUM
        ORDER BY RANDNUMGEN
        FETCH FIRST {?#_of_Accts} Rows Only),
GET_ACTV AS(
        SELECT
          G.*,
          RMSTRANDTE,
          ACTION_CODE,rmstrantim,
          RESULT_CODE
        From GET_ACCTS AS G
          LEFT JOIN RPTINGDATA.ROACTREACC AS R ON G.RMSBILENUM = R.RMSBILENUM AND G.ATTRNYCODE = R.ATTRNYCODE AND RMSTRANCDE = '9R'
            AND (ACTION_CODE IN('1','2','3','4','5','7','14','16','22','25','26','27','29','36','44','66')
            OR RESULT_CODE IN ('2','14','56','58','59','60','61','62','66')) AND RMSTRANDTE >= PLC_DT )
SELECT
"DEBTOR NAME",
"CLIENT ACCOUNT#",
"PLACED DATE",
PLC_DT,
ATTRNYCODE,
RMSBILENUM,
skipplcmt,
"Gate Code"
MIN(CASE WHEN ACTION_CODE IN ('3','4','5','7','25','26','27','29')
    THEN Cast(Timestamp(rmstrandte||'000000') As Date)
    ELSE NULL END) AS FIRSTATTEMPT,
SUM(CASE WHEN ACTION_CODE IN ('3','4','5','7','25','26','27','29')
    THEN 1 END) AS ATTEMPT#,
SUM(CASE WHEN RESULT_CODE IN ('2','56','58','59','60','61','62','66')
    THEN 1 END) AS CONTACT#,
SUM(CASE WHEN RESULT_CODE = '14'
    THEN 1 END) AS PROMISE#,
MIN(CASE WHEN ACTION_CODE = '44'
    THEN Cast(Timestamp(rmstrandte||'000000') As Date)
    ELSE NULL END) AS FIRSTMGRRVW,
SUM(CASE WHEN ACTION_CODE = '44'
    THEN 1 END) as MANAGER#,
MIN(CASE WHEN ACTION_CODE = '1'
    THEN Cast(Timestamp(rmstrandte||'000000') As Date)
    ELSE NULL END) AS FIRSTLETTER,
MIN(CASE WHEN ACTION_CODE = '36'
    THEN Cast(Timestamp(rmstrandte||'000000') As Date)
    ELSE NULL END) AS FIRSTSCRUB,
max(CASE WHEN ACTION_CODE in ('1','2','14','16','22','66')
    then 'Y' else 'N' end) as locateacct,
sum(case WHEN ACTION_CODE IN ('3','4','5','7','25','26','27','29') and (rmstrantim between 80000 and 100000 or rmstrantim between 180000 and 210000) and
     ( DAYOFWEEK(DATE (SUBSTR ( DIGITS (rmstrandte) , 1 , 4 ) || '-' || SUBSTR ( DIGITS (rmstrandte) , 5 , 2 ) || '-' || SUBSTR ( DIGITS (rmstrandte) , 7 , 2 ) )) in (1,7) )
     then 1 else 0 end) as primecall,
FROM GET_ACTV
GROUP BY
"DEBTOR NAME",
"CLIENT ACCOUNT#",
"PLACED DATE",
PLC_DT,
ATTRNYCODE,
RMSBILENUM,
skipplcmt,
"Gate Code"
-Dell

New Podcast Not Showing Up In Searches

I received approval for a new video podcast form the iTunes store about two weeks ago, but the show still does not show up on searches in the itunes store.
The link to the podcast works fine, but it doesn't seem to exist when searched. Anyone have any insight? Any clues how to resolve?
This is the email I received:
Dear Podcast Owner
Your podcast, located at [ http://feeds.feedburner.com/DrBrown ], has been approved. You should expect to see it in iTunes within the next few hours. When it's available, you will be able to access it with the URL below.
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=264538009
If you have questions or wish to make changes to your feed, please consult the technical spec at http://www.apple.com/itunes/podcasts/techspecs.html. The spec contains detailed information about key topics like adding "cover art", changing your feed URL, and adding other helpful iTunes-specific tags to your podcast.
There is also an Apple Discussions Forum exlcusively for podcast producers, located here: http://discussions.apple.com/forum.jspa?forumID=1107. If you have a question or a problem that the technical spec cannot answer, the community of iTunes podcasters may be able to provide valuable guidance.
Sincerely,
The iTunes Store Team

I'm gonna have to go with "epontius' postulate of unfound podcasts" on this one, my friend. (Look at the last post in the linked thread.) You are but one further confirmation of the hypothesis.
What this means to you is: it is becoming more evident that podcasts with only one episode are not searchable in the iTMS . . . and you only have one podcast in your feed. Update your feed, put up another 'cast, and I bet that your podcast will become searchable a few days afterward.

New episodes not showing up in iTunes

I have added a new episode (item) to my feed and pinged iTunes and the new episode will not show up. The feed was validated and is in the proper format.
When people subscribe, the episode is available and workign fine.
Any way idea on how to get the episode to show up in the listing?
http://advisor.morningstar.com/rssdata/xml/getchoatepodcastdata.xml

Yeah. I checked on this yesterday and it seems to be broken still. I've starred at the code for quite a while and for the life of me can't see what's wrong.
My only other theories are:
1) it for whatever reason doesn't like the formating, no line breaks, just one long string...which in theory shouldn't make a difference...but this is Apple we're dealing with so who knows.
2) doing a search for Morningstar, brings up several podcasts...the one we're dealing with here "Morningstar Advisor" and another similarly named "MorningstarAdvisor". Both seem to have different content. Not sure if iTunes might be confused into thinking that this is a duplicate feed and is no longer updating it.
Erik

Nokia e71 New messages not showing in inbox

I recently updated my nokia e71 with the new software from pc suite, everything went fine but i recieved around 3 messages just after I had restored all my data onto it, I went into the inbox to read them but its showing no new messages. On the message menu my Inbox logo has a read star indicating it has new messages but they are not showing up, its also saying I have 4 unread messages when I synchronise my phone to my pc yet I cant read them via the pc. Help please!!
(Ive reset, restored to factory settings & rung nokia support with no help)
Message Edited by beckuhgreaves on 19-Jan-2010 04:21 PM

If you have a memory card, check to see if the phone is still storing messages in the same place. Example, if the phone is currently set to store messages on the phone memory, switch it to the memory card and see if the messages then show up.
If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

New portlets not showing up in portlet repository

I have created a couple URL based portlets and registered the provider with my portal. When I go to the portlet repository to add the new portlets to a page, they do not show up. If I go the Providers Tab on the Portal Navigator Page, I can see them.
I suspect this has something to do with my coworker trying to get the Web Cache working though he can't tell me why my portlets aren't showing up.
Any one have any ideas?

Web Cache shouldn't impact this (but I'm not saying that it isn't ;-)
Try the following:
1) refresh the portlet repository by clicking the "refresh" button in the provider registration page
2) check the security settings on the portlets - portlets will not be displayed if either the portal security (applied via the portlet repository) or portlet security (applied by adding a SecurityManager to a portlet) denies access

LR1.3 - new ICCs not showing up in Custom Profile popup list

Similar Messages

Maybe you are looking for