LR2.1 Not Showing Camera Profiles List

I'm probably misunderstanding something here, but I've checked the installation instructions and the faq and can't figure out what.
I'm using Win XP Pro SP2 and LR2.1 (the just released final version). I've downloaded and installed (automatically, by running the .exe) (cameraprofiles_b2_win_102208.exe) the camera profiles.
I use a Leica M8 (which provides .dng raw files) and a Canon 5D (which provides .cr2 raw files).
I understand from what I've read that I should be able to go to the camera calibration panel in LR 2.1 and get a list of cameras to pick from,
but I don't.
When I open a Leica raw image I get these choices under camera calibration:
ACR 4.4
ACR 3.6
Adobe Standard beta 2
Camera Standard beta 2
Opening a Canon image gives me a longer list of choices:
ACR 4.4
ACR 3.3
Adobe Standard beta 2
Camera Faithful beta 2
Camera Landscape beta 2
Camera Neutral beta 2
Camera Portrait beta 2
Camera Standard beta 2
Is LR somehow automatically recognizing which camera shot the image and assuming I don't need to be bothered with a list of possible cameras to choose from?
Any help on what I'm missing will be appreciated.

>I understand from what I've read that I should be able to go to the camera calibration panel in LR 2.1 and get a list of cameras to pick from, but I don't.
No, you get a list of camera profiles, not cameras. The list only shows profiles that are made for your camera model.

Similar Messages

  • Lightroom 5.7 Not Showing Camera Profiles from DNG File

    Hello,
    I just installed Adobe DNG Converter 9.0 and converted some Nikon D7200 fles to DNG for import into Lightroom 5.7. This works fine except for the Camera Specific profiles not showing up. Only Adobe Standard shows up.
    When I open the same DNG file in Adobe Camera Raw in Photoshop CS6, [it] properly shows all the camera specific profiles for the D7200. What am I doing wrong?
    Here is what the develop module Camera Profile drop down menu looks like in LR 5.7
    And in Photoshop CS6 Adobe Camera RAW ( ACR ) 8.7.1.311
    Thanks for your insight.

    gonzalu,  the reason is because the profiles are installed separately for Camera Raw vs Lightroom. 
    If you're using Lr 5.x, then to get the extra D7200 profiles visible in Lr, you'll need to manually copy/install them.  Try looking here:
      C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera\Nikon D7200
    and copy the contents of that folder to here:
      C:\Users\USERNAME\AppData\Roaming\Adobe\CameraRaw\CameraProfiles
    (where you should substitute your actual username, above).
    Then restart Lr and the profiles should be visible now.
    (You don't need to do this step if you're running Lr CC, because the new profiles are included with that installation.)

  • Old All-Day events not showing in Calendar List View

    Reviewing events in my Calendar on the iPhone and have noticed that All Day Events that are older than one year do not show in the "List" view
    For example, I have all my holidays in a calendar called "Vacation". Month and Day view list holidays from earlier than today (09 Sept 2008) properly, however list view shows nothing. Timed events (e.g. day trips) in the same calendar show.
    Similarly no Birthdays appear in the past. I can see a case for Birthdays being omitted in the past, but not other events (e.g. wanting to know exactly when you went to that all day wedding last summer)

    I have this same exact problem. For me, past events that have a specific time associated with them show up in List view; however, past events that are all day events only show in List view once in a blue moon only. Apple support has been absolutely clueless about this issue. They just tell me it's weird and they have no explanation. It's unbelievably annoying though.

  • TS1702 Updates in App Store is not showing the Apps list

    After updating iOS to 6.1 in my iPhone 4s, while tapping 'Updates' in App Store, it is not showing the Apps list, though over the icon it is showing that 11 Apps has got Updates available.

    hi
    i've had your same proble,
    you have to go on settings-->itunes&app stores-->apple ID and sign out.
    after this restart your device:
    Reset the iPhone by holding the sleep/wake button at the top right of the device and the home buttonat the bottom center of the face at the same time.
    Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power off slider appears. If it does, just keep holding it.
    Wait until the white Apple logo appears.
    ok, now go to settings-->itunes&app stores-->apple ID and sign in again
    ... for me it worked
    bye bye let me know if it works even for you!

  • Calendar events not showing up in list view

    Hi,
    some of my events are not showing up in list view. They are synced to the iphone. I can see them in day and month view.
    It seems to me that events created with ical and synced through MM are not showing up, but I'm not sure.
    Any idea?
    Wilfried.

    Yes I have also events from the holidays and the events I created.(Invitations and others) but where is this option for the NC? In general>notifications I can't find anything about showing events from different calendars there. And how is this subscription made because I had the holidays as soon as I input my account on this device. Maybe I included the holiday calendar but I don't remember. How is that made? And where to find these options?

  • Calendar items not showing ONLY in list view on iPhone

    Weird: My Calendar items are not showing in the list view only, on iPhone.
    They show when I search, they show in month, they show in Day views--just NOT in list view.
    Ideas?

    I just had the same problem (calendar information--for eight different calendars--OK on laptop and on Mobile me; on the iPhone only 3 of my calendars were displaying in "List" view, but all eight were appearing in "Day" view); first time I've encountered this problem (and immediately after installing the 11-February-2010 iPhone software update, so I'm suspicious that this might have been the cause).
    Solution described in posting immediately above seems to have worked. I.e.,:
    1. shut OFF MobileMe syncing for calendars on the iPhone (from Settings menu);
    2. wait for calendar entries to be removed;
    3. shut off iPhone, and wait 2 minutes;
    4. restart iPhone;
    5. turn ON MobileMe syncing for calendars on the iPhone (again, from Settings menu).
    All eight calendars now appear in List view (and still appear in Day view).

  • The firefox icon shows on my desk top and in my task bar, but why does it NOT show in my list of Program files?

    My Firefox icons are showing and usable from the desktop and from the task bar; however, the Mozilla Firefox does not show in my list of program files. Why doesn't it show?

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

  • HT1727 help how do i make a purchased song my ring tone, it;s not showing on my list for ringtones

    help how do i make a purchased song my ring tone, it's not showing on my list for ringtones

    This song was purchased from the iTunes Store?
    If so, you can't create a ringtone from music that was purchased from the iTunes store, but if there is a ringtone available for purchase and download at the iTunes Store with this song, you need to do that.
    For music in your iTunes library on your computer that was not purchased from the iTunes store, there are a number of ways to create a ringtone with such music. With a Mac, there is an inexpensive or free app avaiable via Apple's online App Store named Ringer. Ringer has access to all music and sound files in your iTunes library that was not downloaded from the iTunes Store for creating your chosen segment of the song to be used for the ringtone. The app places the created ringtone in your iTunes library under Tones for transfer to your iPhone when syncing.
    Creating ringtones on a Mac can also be done with GarageBand, and there is a manual way of doing this with iTunes.

  • Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

    Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

    What's more, they don't even show on the bluetooth devices list..

  • USB001 Port Did not show in Port List?

    sir,
    When i want to install my printer driver, USB001 or USB002 Port did not show in port list.
    How can i install this port manually, please send me link for manual setup.
    Regards,
    Sameer Ali 

    Read the installation instructions in your printer's user manual.  Most USB printers must be connected to the computer first because they are classified as Plug-n-Play.  Once the printer is recognized you should them be prompted for the location
    of the printer software to be installed.Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Installed HP Color Laserjet 3600n software but does not show in model list

    Recently installed the HP software for my Color Laserjet 3600n on my MAc OS X 10.5.5 laptop. The software says it is installed successfully, but when I try to set it up for printing via IP address, it says the ip address is valid, but at the bottom, iwhen I choose select drivers, my model does not show in the list.
    Any thoughts?

    What IP printing protocol did you try, and what does it say to use in the manual?
    Since it's not a postscript printer, I wonder if it uses More Printers > HP IP? (instead of IP printer)

  • HT1338 why is my iPod 2nd gen. nano not showing up in list of itunes

    Ipod nano will show sync sign for 3 sec then it will disappear and not show up in list for me to sync playlist

    Well, after posting that, I decided to try deleting another app that was on the list and then Dropbox suddenly reappeared.  I've seen others say that Open In is limited to 10 apps (which seems lame to me). 
    The strange thing is on my iPad, I only have 9 apps listed, but my iPhone allows 10. Anyone know why this would be or have a similar issue?  Is there a way to make certain apps default to the Open In... list?

  • HT3353 I cloud does not show Numbers app listed although I Cloud button in Numbers is on. Therefore unable to back up Numbers data

    I cloud does not show Numbers app listed although I Cloud button in Numbers is on. Therefore unable to back up Numbers data.

    Did you want a answer to this. I have also backed up my iPhone but files are not showing in Numebrs App on iCloud

  • PSE Not showing camera raw update 8.8

    My PSE13 is saying that camera raw is up to date at 8.7 but it will still not read my NEF Files.. I saw camera raw 8.8 is available but my PSE is not showing an update available so how do I manually update my Camera Raw?

    Perhaps that is your experience, MBP, at a particular point in time and/or on a particular platform for version of PSE13, but for me on Windows 7 and Windows 8, with PSE 13.1 & ACR 8.7.1 installed, there still is no update found when checking from Help / Updates in the PSE 13 Editor.  I have also downloaded and installed the Camera RAW 8.8 installer from the Adobe HelpX page, and that installer installs ACR 8.8 for PS-CS6 and PS-CC but no PSE13--I have all three on my system.  I can manually copy the plug-in from the PS folder to the PSE folder but that's not something the updater is doing on its own.
    For someone who has some computer savvy, and is running Windows, at least, you can download the ACR 8.8 installer EXE, rename it to have a .zip extension, open it with 7zip (not Windows native compressed folder handling, or WinRAR) and unzip the contents to somewhere, then look for the Camera Raw.8bi file, and copy that over the top of the PSE13 file of the same name.  There are two Camera Raw.8bi files.  The one under $SHELL[70] is the same size as in my PS-CC so I assume that is the 64-bit one.  There is another one under $MUSIC that is slightly smaller so maybe that is the 32-bit one but the folder structure also says CC so I'm not sure.
    The installer is here:
    Camera Raw plug-in installer
    Besides the .8bi plug-in there are also new camera profiles.  Those can be more easily installed by installing the DNG Converter 8.8 available from the Adobe Updates page:  http://www.adobe.com/downloads/updates/

  • T code is not showing up in list of Executable T code for User.

    Friends,
    Role with the ZFITIC_P2P tcode has been assigned to user.
    But still user is getting the error message : " No authorization to exucute ZFITIC_P2P  Transaction code"
    Action Taken :
    Run PFUD job again.
    Refresh the user's buffer.
    Ran the User Compar for the Role also.
    Still if I go to SUIM ->> Transactions -> Executable by User -> List of T codes does not show ZFTIC_P2P Transaction.
    Any suggestions...
    Thanks,
    Pranav

    In addition to the transport order where the single role might be in a different composite, you should consider that changing the menu after having previously created a transport request will not add the new generated profile data to the TP request at the time when you release the transport - but it will add the menu items.
    Please take a read through this thread: T-code PFCG and CTS
    Did you make any further changes before releasing the transports?
    It is best to only create a transport when you are ready and release them without delay to to tested. If you are brave then you can regenerate in the target system, but you should ensure that your SU24 data is identical and the role was intact: only "old" authorizations and nothing new was introduced or deleted.
    Cheers,
    Julius

Maybe you are looking for