LR2.7 does not bring up images from Nikon D7100

LR 2.7 does not bring up images from Nikon D7100 which I have just purchased. I have downloaded latest DNG raw converter 7.4 but does not work. The images come through fine in Bridge but not Lightroom. What is the problem?

Since camera makers insist on their own proprietary file formats, Adobe must provide support for each new camera as it is introduced. When a new version of Lightroom is released all development and support for the previous version ends. Your camera wasn't even mentioned or introduced when Lightroom 2.7 was released. Consequently, there can be no support for it. When you buy the newest camera model you should expect to also buy updated software to support that camera. In any event, the raw processing in the latest version of Lightroom is so far superior to what you have you really need to upgrade your Lightroom. You might consider using the Lightroom 5 beta until the official release.
Are you sure the DNG converter doesn't work? You only point it to the folder containing your raw files. The DNG converter doesn't list the contents of the folder. You will only see a list of your NEF files after you click the button to convert them.

Similar Messages

When in Lightroom 2.3 edit in Photoshop does not bring up image in Photoshop

When in Lightroom 2.3, you go to edit in and select Photoshop, it opens Photoshop CS6 but does not bring the image in. This has only happened recently and maybe I have done something to make this happen as it never used to happen. What can I do to figure this out?

First, update your LR 2.3 to 2.7. The update is free and should help with some things: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4677
If after updating Lightroom, it doesn't start working, initiate a repair install of Photoshop CS6.

Aperture does not recognise TIF files from Nikon CoolScan

The TIF files from my Coolscan are good in every other application, but Aperture does not recognise them. I've tried re-saving the TIFs as JPG and PDS but Aperture doesn't recognise any file generated from the TIF. Maybe it's something to do with the scanner driver? Any ideas how to load these files into Aperture?

You might check the color space that is assigned to the files. If you are using Nikon Scan software to manage your CoolScan, there is a preference for setting the color space of the saved file. FWIW, Nikon CoolScan .nef files are a 'raw' file, not camera raw, that was/is a Nikon proprietary format for their scans. If you use the Nikon Scan for image editing, the edits are non-destructive in saved files and can be adjusted by re-opening the file in NS. Adobe first made editing camera raw available in early 2003 and the Nikon format preceded that. Nikon's camera raw format also has the .nef extension, but is not the same as the CoolScan .nef-- really confusing. I suggested checking the color space, because Nikon has different internal names for Adobe RGB(1988) as well as their own Wide Gamut space.
All said, I've not had a problem opening .tif scan files in Aperture.

PhotoShop Elements 11 does not recognize NEF files from Nikon D600

Hi , I'm using PhotoShop Elements 11. while trying to open NEF files from Nikon D600 I'm getting message "Could Not Complete your request because the files appears to be from a Camera Model which is not supported....." . Now I tried to update but its showing software is upto date. Camera Raw version I can see 7.1.0.354. Please help me to solve this issue.
Thanks,
Jeet

You are not up to date. The latest version of camera raw is 7.4
Try again from Expert Mode
Help >> Updates

Converting RAW images from Nikon D7100

My PSE11 will not recognize/convert RAW images from new Nikon D7100 despite trying to download PSE update. Have had NO prior problem with RAW using D80. Help!

When you saying "trying to download PSE update" do you mean you're trying to do it manually? The best way is editor>help>updates. (Assuming this isn't the mac app store version, which is a whole 'nother story.)

Firefox 3.6.12 does not load nay images from Joomla sites 1.5.21 and above. Works on Safari but Not Firefox. This happened after the firefox upgrade. All Joomla 1.5.20 and below work ok. why is this happening?

I have been developing Joomla sites for more than 4 years now and generally all the Joomla sites work well in Firefox. In this case, however, ever since Joomla upgraded to 1.5.21 and above, all Joomla sites on this level are having problems with Firefox 3.6.12 loading images.
We have tested a number of Joomla template manufactures and all the results are the same.
This problem is with the macbook pro only thus far. All the other apple products, like the towers, etc. are fine.
Not sure why this is happening. Any advice would be greatly appreciated,
Thanks,
Leland

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

LR 3.4.1 does not filter hot pixels from Nikon D7000

Lightroom has so far been able to filter hot/stuck pixels from my old D70s raws quite well. For some reason however, it doesn't seem to recognize them in raw files from my D7000 and noise reduction leaves them completely untouched.
The camera doesn't really support mapping (except through potentially multiple multi-week customer support roundtrips), and the built-in noise reduction for long exposures effectively doubles the time per picture. It'd be really useful to have mapping from a static black frame in LR, or a despeckling/denoising method that picks up the "new and improved" stuck subpixels.

There were reports of "hot pixels" when shooting videos:
http://www.engadget.com/2010/12/22/nikon-d7000-firmware-update-released-cools-down-hot-pix els/
....and with still images:
http://www.photosig.com/go/forums/read;jsessionid=awkf4asZE9kc0r15__?id=245003
http://www.microstockgroup.com/cameras-lenses/nikon-d7000-sensor-problem/
There is a firmware update to fix or minimize the issue with videos, but that won't help your RAW still images. I downloaded your image file and most of the hot pixels are actually groups of 3-5 pixels at 150-180 level (out of 255) viewed in PS. I'd return it if you can, or take it in for repair under Nikon warranty. I am sure Nikon is well aware of this "quality control issue" (i.e. bad sensor chips).....Not acceptable! I tested my less expensive Canon 600D at 30 sec. and ISO 1600 and found no hot pixels above 35, all of which clean up nicely in LR with minimal luminance NR.

Lightroom does not import my images from 70d camera sd card when there is video on it

I am attempting to import images into Lightroom 5 from a wedding that was shot on a 70d canon camera and recorded to an sd memory card. There are also two short videos (less than 2 minutes each) on the card. Lightroom acts as if it is importing with the progress bar showing but it just hangs there and nothing gets imported. I even tried unchecking the two videos but still nothing. I had no trouble importing images when I didn't have any videos on the card.

I have the very same problem. I only noticed it in LR 5.4/5.5. If there are any videos on the card, then Lightroom is unable to see or import any of the RAW files on it. I currently have to import the videos, disconnect the camera, delete the video files, and reattach it before Lightroom can see the CR2 files. This was not an issue in Lightroom 5.2/5.3 as far as I know. I have not changed SD cards or anything else other than upgrading to Lightroom 5.4 (and later 5.5 when I found the problem). Any help is appreciated.

IPhoto does not import rotated images from camera

I plugged in my CF card to a reader and first looked at all my photos. Those that needed rotation I fixed with preview. Then when I opened iPhoto, it didn't recognize any of their file formats. Is there a good workaround?

I would not mess with them on the card - use image capture to bring them to the Mac disk and then rotate the ones needing rotation (and rename, etc) and then import to iPhoto
LN

PSE7 does not support raw files from nikon d90

Can someone please help me , i have pse7 and just bought a new nikond 90 but i cant upload my raw files with pse 7. is there a patch with easy to follow instructions?
thanks
for any help
vanessa

You need the 5.6 camera raw plugin from here:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4626
MTSTUNER

Aperture 3.4.5 does not open raw files from Nikon P7800

Apple's list of supported cameras includes the P7800, but I get unsupported image format when I try and import nrw (raw) files. What gives?

Check your installed DCR version in the "About Aperture" panel and use Software update to see if a later version is available.
But I think you may be out of luck.
You indicate you are using OS X Lion, for which the last RAW update looks like 4.0.9 - http://support.apple.com/kb/ht4757
Support for the P7800 was introduced in RAW update 5.0.1 - http://support.apple.com/kb/ht5371 - which looks to be for Mountain Lion up.
Andy

Does elements 11 open RAW files from Nikon D7100

Having problems in opening RAW files from my Nikon D7100 in elements 9. Want to know whether elements 11 will open it?

Barries99
Yes. Photoshop Elements 11 and Premiere Elements 11 should open your Nikon D7100 raw files if Camera Raw 7.4 is installed.
Raw images from Nikon D7100 are not supported until Photoshop Elements 11 and Premiere Elements 11.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Make sure that the Elements 11 version is updated for Camera Raw 7.4. See Help Menu/Updates.
If you are going to stay with your Photoshop Elements 9 Premiere Elements 9.0/9.0.1, you can use the DNG converter
to get .dng.
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
Remember, you need a version of Camera Raw that supports your camera as well as a version of Camera Raw that is suppported
by the version of Photoshop Elements Premiere Elements that you have.
ATR

Raw files from Nikon D7100

Can I upgrade from my PE9 to PE11? Does PE11 supports RAW files from Nikon D7100, because PE9 does not. Does Photoshop Lightroom 5 support RAW files from the Nikon D7100?
The DNG converter does not convert RAW files from the Nikon D7100.
André

Yes, the latest FREE DNG Converter (version 8.1) will support Nikon D7100 raw photos. Then, you can use the RAW photos in PSE9 (or PSE11).
Lightroom 5 also can handle Nikon D7100 photos.

Opening NEF file from Nikon D7100 i Photoshop Elements 11, problem.

Hi
Photoshop Element no. 11 do not open NEF file from Nikon D7100.
Versjon of element: Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
Pleas help me.
Martin Høegh

How do I update Adobe Bridge CS4 so that I can view NEF files?
Unfortunately, you don't. Bridge can never be updated again once a new version of Creative Suite comes out, so bridge CS4 can't be updated past where it was back when CS5 came out. There is no way to make bridge CS4 see the raw files for the D7100, I'm afraid.

On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being directions from here, the right click does work on Google map when using Safari

On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being "directions from here", the right click does work on Google map when using Safari

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

LR2.7 does not bring up images from Nikon D7100

Similar Messages

Maybe you are looking for