LR2 problems after upgrading to Mac OS X 10.6.3

Hi everyone,
I'm having problems with Lightroom 2 under Mac after upgrading to OSX 10.6.3. For example when I'm trying to export long images sequence, it does freeze the Lightroom and I have to Force Quit it.
Someone recommended me to rebuild index however my library is over 900GB (!) huge and I don't want to spend another day or so rebuilding my library. Any suggestions?
Thanks,
Szymon Masiak
motionVFX.com

Welcome to the Apple Discussions. Try the following fixes:
The million dollar trick or how to fix iWeb in 10.6.2
iWeb & iWork: Applications may suddenly quit after updating to Mac OS X v10.6.2
OT

Similar Messages

Problems Problems after upgrading to Mac OS X Lion

I upgraded my mac os to Lion last week on my Mac air. After loading, my norton could not work probably. Then last night, files in my start up disk doubled and hence error appeared - that my disk is full while I only used 50% of the storage capacity.
This morning my iphone 4 also appeared to be have the SMS messages and photos and every files also appeared to duplicate itself.
Can anyone assist ?

After loading, my norton could not work probably.
Does Norton ever work properly?
Norton is a known troublemaker, and most likely the version you have is incompatible with Lion. You could try updating Norton, but personally, that's one I'd remove immediately and never come near again. If you feel you need AV software on your Mac, the only thing I would recommend wholeheartedly is ClamXav. Sophos' free home AV software would be my second choice, though with some reservations, as I've heard of people having problems with it.
As to the doubling files problem... can you describe more precisely what you're seeing? I've never heard of such a problem before.

Printer problem after upgrading the Mac HD disk

After replacing the Mac HD on my Mac Pro, and copying all the "old" data from the "old" Mac HD using Migration Assistance, I cannot print. Getting "communication error". Re-installing drivers does not help. The printer is a Canon MF4350d connected over USB. Is there files somewhere (USB drivers?) that may affect this issue. Or can how can I delete all (Canon) printer drivers and make a clean install?

First, make a backup of all your data or you entire system. Then you will follow the instructions in the link below to erase the Yosemite volume and reinstall Yosemite from scratch. After assuring it is working properly you can restore your third-party software from original media. Be sure the software is compatible with Yosemite. Finally, restore your data from your backup.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

MacBook internection problem after upgrade to Mac OS 10.4.10

Hi,
After I upgrade my MacBook to Mac OS 10.4.10, I am problem with my wireless internet connection. Before upgrading the OS, my internet connection worked fine. But after the upgrade, the MacBook lost the connection every other minutes. So, I have to manually click on the wireless icon to connect it. I have tried to reboot my modem and router, and still have the same problem. I tried using my wife's macbook with Mac OS 10.4.10, the connection is fine. So, I am wondering what is the problem?? Please help.
STAN

My MBP airport connectioin was very inconsistent. It wasn't until the Airport Firmware was updated and subsequent OSX updates that thyings stabilized and I thought I saw the end of those issues.
It has been stable for the longest time, once I updated to 10.4.10 it started the same intermittent connection problems again.
I was planning to switch to Airport Extreme base station and did so the other day and now I have no issues, extended range, and a much stronger signal.
I am not suggesting to go out and buy a new airport. I actually think that whatever they changed in 10.4.10 regressed backwards and Apple will correct it in a future update.
If yuou cannot wait for that, call Apple support and share your experience and they might send it up to a Support Specialist.
MBP 15" Mac OS X (10.4.10) iMac Flat Panel 800 Mhz, iMac G5

Problems after upgrade: Leopard to Leopard no longer works

My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
tia,
n

I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
Problem:
-If you have an internal iSight on an iMac and your camera works fine in Tiger
-If you upgrade to Leopard
-If Chat camera doesn't show your image (iSight off) even though the green light is on
-You can see the other persons video on iChat
-Your friends can here you and you can share screens, files, etc.....everything but have them see you
These are the initial steps I took:
- Deleted the pLists(or stored preferences for the Application) described at the top of this thread
- Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
- Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
- Tried chats with various people on various fast/slow networks
- Restarted all aspects of the network: router, wireless access point, computer
- Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
- Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
- Opened 'PhotoBooth' and coudn't see my image(black screen)
- Opened iMovie and couldn't capture video via the iSight(black screen)
- Opened iChat->Preferences->Video and couldn't see my image
- Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
http://docs.info.apple.com/article.html?artnum=303446
Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
I hope this helps.

Permission problems after upgrade to 10.5 on early Power PC G5 Tower

Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Unable to find bootcamp in control panel after upgrade to Mac OS X 10.6.8, please help.

Unable to find bootcamp after upgrade tp Mac OS X 10.6.8, please help.

you problem is in OS X (guessing here)
Guess #2: you use an NTFS driver in Mac OS X
Try OS X forum? No?
When you do reboot into Windows - use Option key for one - and go to Windows Control Panel: Boot Camp: the Startup Disk section to change the default OS is there and works.
It isn't "boot camp" it is Windows. Boot Camp are drivers, control panel, program to partition. What you wanted to see was "Windows" OS to change the default.
Do you 'see' Windows volume on the Desktop as being physically there?
Opened Disk Utility and look at the drives and volumes: Windows volumne is still present.

Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu

Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu, for which i never kept any password.
Any DEFAULT Password so that i can unlock the settings menu.

That's quite odd, just repeat the update process
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Depois de Atualizar para Mac 10.9 não consigo mais baixar Programas - Erro "hardware Gráfico " (After Upgrading to Mac 10.9 I can no longer download Programs - Error "Hardware Graph" (

Ola amigos
Depois de atualizar para o sistema Mac OX 10.9 não consigo baixar programas e Games que tinha na versão anterior.
Aparece um erro de " hardware Grafico não compativel"
_____ Minha dúvida fica, porque antes eu comprei e baixo, e agora não baixa mais ?
Alguem poderia ajudar ???
my mac is Macbook Pro 5,2
=============\\=============\\ in ingles ==========================\\===============\\====================
Hello friends
After upgrading to Mac OX 10.9 system can not download programs and Games that had in the previous version.
Appears an error of "hardware not compatible Grafico"
_____ My question is, because before I bought and down, and now does not download anymore?
Could someone help??

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac os

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.

There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC.

Problems after upgrading to iTunes version 6

Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!

Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP

Can't view Camera RAW files in Bridge or Photoshop CS4 after upgrading to Mac Mavericks X OS.

After upgrading my Mac operating system to Mavericks X I can no longer view Camera RAW images on either Bridge or Photoshop CS4!
I'd already fixed the issue of not even being able to launch Photoshop by installing Apple's Java applet, but this doesn't seem to have helped with the Camera RAW situation.
I've tried invoking "Update" in both Bridge and Photoshop, and both indicate there are no updates.
I even went to Adobe's Camera RAW area, and downloaded and installed the Camera RAW plugin specifically for my cameras (Canon 5D Mk ii) and Photoshop CS4, and that hasn't helped at all!
I feel that it's just another silly Java applet, but I haven't any idea how to proceed from here!
HELP!
Thank you,
Bob

Did you download and install the camera raw 5.7 update?
Adobe - Photoshop : For Macintosh : Camera Raw 5.7 update
There are also other updates you should install, such as 11.0.2 for photoshop and the bridge output module update, if you need them.
Product updates
Adobe - Bridge : For Macintosh
Adobe - Creative Suite : For Macintosh
Adobe - Photoshop : For Macintosh

After upgrading to mac os x snow leopard iphoto slide show will not play . why is this ?

AFTER UPGRADING TO MAC OS X SNOW LEOPARD I CANNOT USE IPHOTO SLIDE SHOW. WHAT HAS HAPPENED?

AFTER UPGRADING TO MAC OS X SNOW LEOPARD I CANNOT USE IPHOTO SLIDE SHOW. WHAT HAS HAPPENED?

After upgrading to MAC OS X 10.10.2 Lightroom 5 has an error that it cannot read the card when trying to import photos. The card is fine as I can import into iPhoto so any ideas?

After upgrading to MAC OS X 10.10.2 Lightroom 5 cannot read the card (RAW files , converting to DNG) when importing. The card is fine as I can import into iPhoto - any ideas?

It’s usually necessary to trash the prefs after updating OSX to Yosemite. Start by quitting Lightroom 5.
Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to:
Library >> Preferences
clear everything relating to LR5 which usually means deleting the following files:
com.adobe.Lightroom5.plist
com.adobe.Lightroom5LSSharedFileList.plist
Then re-launch Lightroom.

LR2 problems after upgrading to Mac OS X 10.6.3

Similar Messages

Maybe you are looking for