LR2 renders PSCS2 files incorrectly

The problem goes like this: If I work on a picture in LR2, then edit it in PSCS3, it works fine. Printing in either PS or LR2 results in exactly the same print. The on-screen previews in LR2 are fine.
If, on the other hand, I find a picture that had been edited in PSCS2 previous to the moving it to LR2, the colors, brightness etc are terrible and unusable- the PS version that is. And, as a bonus, not only does it look bad on the screen in LR2 but it prints the same way. Bad that is.
If I use the original picture in LR2 - the raw version, and edit it in PSCS3 it's fine also. And looks nothing at all like the one edited previously in PSCS2.
Anybody have any ideas at all?
Thanks.

Thanks for your responses.
Couple of things: This is not rare but seems to be every PSD formated file. (I'm not actually sure it's every one because I have quite a few.) Resetting All works just fine. Thanks for suggesting that. Had not occurred to me.
I had thought about profiles and had checked. While I haven't checked every one, the ones I have checked do have an embedded profile - ProPhoto in every case.
And, I forgot to mention I'm running Mac OS 10.4.11 on a PowerPC altho that doesn't seem to play a role.
Thanks again.

Similar Messages

  • Trying to open iTunes I got a error message of msvcr80.dll can not be found. I thought that it was an iTunes program problem. I tried reloading iTunes and then got an error message of a program is trying to acces a library file incorrectly. How can I reso

    When trying to open ITunes, I got an error message of msvcr80.dll can not be found.
    Assuming that it was an iTunes file, I reinstalled iTunes.
    Trying to open again, I got an error message of an appication is trying to open a library file incorrectly.
    How do I resolve this problem.
    Neither my PC with Vista nor my my laptop with windows 7 will work?
    Thanks

    Hello Msvcr80.dll,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Figured it out.  It had nothing to do with the software levels of Safari or Adobe Acrobat.  Here's the fix:
    Open Finder/Applications
    Search "Internet Plug-Ins"
    Move any Adobe plug-ins to the trash
    Quit Safari
    Launch Safari
    Your pdf document should now render in Print Preview and print properly.

  • Re-Linking rendered preview files?

    I had to move an entire project from one drive to another. All contents were moved in the same folder structure including the preview files.  Now the rendered preview files dont link up to the project. How can I re-link thses files?
    Thanks
    Ben

    Thanks Jim, but Premiere did not ask for the file location when it started up.
    Harm, so you are saying I need to re-render everything?. Seems like Adobe would have a way to make this work.
    Anyone from Adobe have a comment on this?
    Thanks
    Ben

  • Rendering motion files

    So I am rendering these files that I made in motion in the FCP timeline. But when I want to play them back after rendering is completed fcp reverts to the non-rendered file. I feel like sisyphus. Please help!! Where are the rendered files going??

    I've had that problem with fonts not rendering properly, dunno if it's the same but make sure the effect is installed in your system library and not just your user library.

  • Media Encoder rendering MP4 files with AAC and M4V files leftover

    Hey all,
    Just a quick question. My computers' media encoder has started rendering mp4 files and leaving the m4v and aac files there once the render is complete. The mp4 is fine but it's a bit anoying and messy that it's not deleting the files afterwards. Anyone familiar with this issue?
    Thanks

    Sorry my computer AND media encover version. I run Creative Cloud on a new Mac Pro
    File seems to render fine
    Log info:
    - Source File: ***
    - Output File: ***
    - Preset Used: Match Source - High bitrate
    - Video: 1920x1080 (1.0), 25 fps, Progressive, 00:00:42:17
    - Audio: AAC, 320 kbps, 48 kHz, Stereo
    - Bitrate: VBR, 1 pass, Target 10.00 Mbps, Max 12.00 Mbps
    - Encoding Time: 00:13:13
    04/27/2015 03:55:51 PM : File Successfully Encoded
    No errors reported.
    And this is what I end up with.
    Is that helpful?

  • Sick of "Rendering Required Files" to Play. Want 1x scrub.

    Multi-cam project. Very large.
    I can get some work done when I focus on a single sequence, and keep working at it.
    But bouncing between sequences results in "Rendering Required Files" and multi-hour delays to be able to hit play.
    Scrubbing works well enough... audio skips a bit but I can easily make out what is being said.
    How can I treat scrubbing as Play? A 1x scrub button? Can a macro be set up if it doesn't already exist?
    I hit spacebar when walking away from computer, and hopefully enjoy pre-rendered audio next work session. But I need a way to work without waiting for an audio render to complete. I move between sequences all the time, and currently am not seeing a productive workflow.
    Could someone explain how I can use scrub in a more user-friendly fashion, without it being so dependent on my current zoom level?
    Thanks, -g

    I've already submitted one (Jan 18 never heard back). I was hoping there was a work-around someone knew about.
    Here's my request copy/paste.
    Title:
    Immediate ability to edit multi-camera scene without need to pre-process audio.
    How:
    To play a scene that I'm working on, often it is necessary to pre-render audio. If the scene consists of multi-camera & multi-audio source with many cameras, this can take hours (on IMHO decent hardware).
    But, if I simply want to scrub the timeline, Premiere is capable of emitting audio indicating how the timeline sounds at that moment.
    I need some IMMEDIATE ability between the two... it need not sound any better than scrubbing... maybe the audio drops out or just doesn't sound quite right. But I need the ability to scrub/play at 1x speed without waiting hours for pre-render of audio.
    Maybe pre-render can be temporarily disabled. Maybe it is a new type of "play". Maybe it is a scrub locked to 1x speed.
    Why:
    My project consists of ~50 lectures. Each lecture is multi-cam coverage with additional audio channels. To edit any individual lecture this is (barely) passable, so long as I'm not flipping between lectures which often requires a re-render of the pre-rendered audio.
    But all these lectures are now to be used in a single timeline. I'd like to copy moments from individual lectures, but I can't review any edited lectures without re-rendering that audio. Even just to identify a snipped of audio... scrubbing is to hard to control speed to make the audio intelligible. Play almost always triggers audio pre-render taking ~1h.
    So to skip thru various lectures looking for key moments is impractical.
    As a work-around I'm using rendered MP4 and importing that, just so I can brainstorm final project easier. But I should really be able to easily pull from my edited lecture timelines, and so have access to multiple audio channels and camera angles right now. I only import rendered MP4 because I can't wait an hour just to identify and copy a 5s moment of audio.

  • Why does Illustrator open this file incorrect (coloured polygon becomes uncoloured)

    I have an eps file that opens incorrect in Illustrator (CS6, CS4, 10 I tested). I wonder why this happens. The path seems to be complex, but Photoshop and Distiller converts/opens this file correct. So this seems to be a bug in Illustrator. I ca send you the file.
    How can this be solved?
    Patrick.

    Please explain me where I can put my file? Can I email it to you? Can I upload this to this forum?
    Patrick.
    Date: Wed, 18 Dec 2013 08:24:05 -0800
    From: [email protected]
    To: [email protected]
    Subject: Why does Illustrator open this file incorrect (coloured polygon becomes uncoloured)
        Re: Why does Illustrator open this file incorrect (coloured polygon becomes uncoloured)
        created by tonyharmer in Illustrator - View the full discussion
    Hi Patrick
    Pop a link to the file up and let's have a look.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5941529#5941529
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5941529#5941529
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5941529#5941529. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Illustrator at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon   running FCP 7 on OS 10.6.8  exporting qt files and rendering project files now takes longer than my old machine   looking at activity mon and % of user is aroun 6 and % of idle around 42

    recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon   running FCP 7 on OS 10.6.8  exporting qt files and rendering project files now takes longer than my old machine   looking at activity mon and % of user is aroun 6 and % of idle around 42  are all the cores being used with FCP7?

    johnnyapplesod wrote:
    exporting qt files and rendering project files now takes longer than my old machine
    It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
    It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
    The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
    I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
    You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
    http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/

  • CS6 Multicam "Rendering Required Files"

    Did a quick search for "rendering required files" and came up with a number of threads from early-mid 2011 regarding CS5 and 5.5 difficulty with PrPro stopping to render audio files when doing multicam edits. I never experienced that until CS6, and now it's happening frequently on a rather basic multicam edit (one HDV, one XDCam-EX, and one AVCHD, with an extra audio track).
    From what I've seen in previous threads, there never was a clear solution to the issue. Anybody shed any more light on it, now a year later with a new version of the software?
    Would I be better off to do a mix down of my four audio tracks before doing the multicam, and then nest that on track one and get rid of my other three original tracks?
    I'm running an i7-920 OC to 2.8GHz on an Asus P6T6 WS Revo with 24 GB of memory, an SSD OS/Programs, a three-disk RAID-5 Project files, a four-disk RAID-5 Data files, and a standalone 6GB/s SATA for scratch and previews, with a GTX-580 for two monitors and CUDA and a GTX-285 for preview/multicam monitor.

    This took me forever to figure out, but I think I have your answer.  When you play back multicam in premiere, it tries to mix all of the audio from your original sequence.  Even though all you hear is the audio from track 1 (at least this was the behavior in previous versions). 
    My fix for this was to delete all all of the audio clips (besides track 1) in the original nested sequence.  Since I use external audio, I just use the camera audio for syncing purposes anyway.  But that's pretty much what you'll want to do.  Mix down whatever audio you plan on actually using for your project and put that in the sequence with your multicam clip.  Or if you prefer, put it on track 1 of your nested sequence. 
    Also, you'll want to unlink the audio and video from your multicam clip, and delete any cuts you've made to the audio.  For some reason, edits to the audio clip also cause the "rendering required files" error.  So just delete all of the many audio "clips" you've made throughout the process of editiing your video, saving just one to drag out to the end of your video.  This way you'll only have one long audio clip spanning the entire length of your video.  Bam.  No more rendering required files.

  • Rendering Required Files CS5

    This is driving me nuts... I have the read the other posts bit cannot fix it. I have a multicam sequence completely built with music, graphic, etc... for whatever reason, today, I am getting this pop up "Rendering Required Files" every time I hit space bar. I am using Windows 7, 2.8Ghz.
    The mutlicam sequence was made up of two cameras and one channel of audio. I first synced them up (two video tracks and one audio track), then put in another sequence for multicam editing. After everything was switched back n forth between cameras, I added all my graphic elements, transitions, credits, etc.. I am almost finished with the edit, but now I get this pop up constantly.... Argh. I cannot go back but am I hoping someone can instruct me on what to do to get rid of this pop up...Thanks!

    I think you should wait for a bit when the "Rendering Required Files" pops up, it might just be doing what it says.

  • "Rendering Required Files" - huh?

    I'm editing a sequence with a couple of nested sequences and a multicamera edit.  Suddenly I'm encountering huge delays when PP RANDOMLY decides it needs to do some rendering. I (seemingly at random) get the message "Rendering Required Files" and then I have to wait for minutes to do anything!
    • There are no compilicated effects in any of the sequences.
    • There are only a few tracks in the master sequence, and only one or two tracks of audio and/or video in the prior sequences.
    • I have a dual quad core MacPro with 16GB of RAM.
    • I have 4x1TB hard drives.
    I can not for the life of me understand why it needs to render anything.  I get the feeling this has to do with audio, but I can not pin this down.  Can anybody explain what the heck the program is rendering so I can figure out a workaround?????

    Not that I'm too much into the "me too" kind of reply, but I just wanted to add my data into this thread in hope for an eventual fix.
    I'm using the PC version (CS5.5) with all the latest updates, on an Intel i7 (4 cores +HT), 24 GB RAM, 2 nVidia GTX470 (sli), a SolidState drive for OS and Apps, and 4x 2TB disks in RAID10 configuration for my data. I think the PC's performance should be more than adequate.
    My projet seems similar to what other users have been describing. I have a first sequence on which I have laid 2 video tracks and 2 additional audio tracks. No video effect has been applied. As for audio effect, I have applied EQ and Dynamics on 2 of the tracks (not on the clips themselves). Ultimately, I ended up muting 3 of the audio tracks. Therefore, only 1 audio track ends up in my mix. The audio clip is an uncompressed mono WAV file which was generated by Audition (44.1kHz, 16bits).
    On a second sequence, I laid the the video and audio parts of Sequence1 as two seperate clips, so they are completely unlinked. I have set the video clip to MULTI CAM. The audio clip having been laid on the sequence seperately is not influenced at by any of my video edits and camera changes. I have used this approach after reading other users' input on this thread.
    When the dreaded "Rendering Required Files..." poped up, I did a couple of UNDO/REDO in order to pin point the exact operation after which the problem occurs. It happened right after I used the Razor Tool to cut my audio clip. At this point, I haven't move my clips' begin and end points. I only applied a cut somewhere in the middle of the audio clip and left it untouch. I can undo that cut and the problem dissapears. But as soon as I cut my clip again, I can no longer play my Sequence #2 without the "Rendering Required Files..." window poping up. I have several hours of video to edit. This happened at 35 minute into the sequence. I can't afford the time to wait for all the rendering to take place, only to end up in the same position where the application will not remember the render it just did.
    Interestingly, I can play Sequence #1 with no problem. On Sequence #2, the problem persits even if I mute (click the speaker and eye icons) all audio and video tracks. I tried selecting a limited work area, even a blank are with no audio nor video, and I still have the problem when I hit the enter (preview) key.
    Also, there's a yellow line on top of my timeline (both sequences) meaning Premiere should attempt to render the sequence on the fly.

  • Rendering mov files! Help!

    I have tried EVERYTHING to fix this problem but don't know what else to do.
    I have a bunch of mov files that I would like to edit on FCP but whenever I put them into the timelines they require rendering (before I even edit them!) And rendering each file is not an option because I have 100s of files and they each take about 30 minutes to render.
    Why is FCP not letting me watch any of the files before they are rendered?
    I also made sure the sequence is on the same settings and the clips but that didn't seem to fix anything.
    any help will be appreciated.

    So I was trying this for MONTHS and couldn't get the clips to work properly. Right after I posted the message I decided to try one more time...and it worked! I changed the setting of the timeline and this time when I put my clip in the timeline I didn't have to render it and was able to edit some clips I've been trying to edit since December!
    Thanks guys

  • I have downloaded the new itunes but when I go to open it, it says "run time error"? it also says an application has made an attempt to upload this file incorrectly?

    I just downloaded the new itunes so I can sync music to my iphone 5 and when I go to open the new itunes, a message pops up that says "Run time Error, an application has made an attempt to upload this file incorrectly"?

    Hello there, tmiller25.
    The following Knowledge Base article offers up some great steps for troubleshooting your issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Error while rendering: Export file not found - what to do?

    Hi,
    I have been editing my video in four different premiere pro projects (as I got adviced to do from these forums because it's AVCHD clips). I have rendered these four projects and burned to four DVD's (total playtime is around 1.5hours) - which is working fine.
    But then I try to import all four projects into one big master project because I want to make a blu-ray iso. The import goes fine (I import like this: File > Import > Choose project > Import entire project)
    I export to encore, make the menus etc. and click "build" to start rendering. The problem is that after some time I get this error:
    Blu-ray Object: "sequence-name-here/project-name-here.prproj", Export file not found
    I have seen this error before while rendering some of the four individual projects - but when I saw them I simply just tried again by exporting to encore from the projects again. This seemed to work - but with the big master project I have tried several times with no luck.
    Can anyone help me fix this issue? :)

    Yes, I got this too:
    For posterity, here is what I have found that completely fixes this error, repeatedly:  Clear Encore's cache.  Specifically:
    Close your Encore project and exit Encore
    Go to the cache subdirectory named for your project (ie. if your save file is c:\projects\mymovie.ncor then go to c:\projects\mymovie\cache)
    Delete the file "mlf.cache.v10"
    If your Encore project contains any Premiere Pro dynamically-linked assets, start Premiere Pro and load at least one of the projects used in Encore.  (I have found that this reduces memory usage -- for some reason, Premiere Pro takes up less memory than if Encore spawns the PProHeadless.exe media server to serve the same function)
    Restart Encore and load your project
    ...and wait, patiently, for Encore to re-scan all of your assets and build up the cache again and don't touch it until it's finished.  I use Process Explorer (http://technet.microsoft.com/en-us/sysinternals/bb896653) to watch my disk activity and CPU to know when Encore is finished (just hover on the cyan-colored graph and you can see what program is performing the most disk activity).  Once it's all finished, I save, then immediately try to build my project again.  For proof of concept, my 40GB BD-50 project just built last night after getting this error yesterday afternoon.
    If any of your assets are not transcoded before you begin this process, transcode them all, then start this process over again from step one.  Clearing the cache does not clear the transcodes.
    I hope this helps someone.  I was not looking forward to completely re-authoring my project, which I've been working on (on and off) for a few months.

Maybe you are looking for

  • Purchase History Report a Problem feature

    I was looking at my purchases and clicked the Report a Problem button, but the only thing that happened was that the button disappeared.  Odd.  Were they just joking? . . . "Ha-ha-ha, did you believe that? Just messin' with you. Bye-bye little button

  • Textarea clipping

    Since I updated to latest AIR 3.9 beta the leftmost part of the text in spark TextAreas get clipped on iOS7 (Android is OK). Just a couple of pixels but bad enough. It looked fine in 3.8. The skin I've used are both the mobile.TextAreaSkin and the St

  • Arch Repositories

    When packages are updated in the main repository, are they simultaneously updated in all Arch pacman mirrors? When I used Zenwalk, there was a European/French server that always was more up-to-date, so I could conceivably mess up my system by mixing

  • HT1338 My hp photo smart printer 5514 wont work with my 10.8 software, how do I fix this ?

    My hp photo smart printer 5514 wont work with my 10.8 software, how do I fix this ?

  • I do not know my password to my apple ID when I first set up my iphone. Help?

    I need help!! I had the iOS 7 beta and I think I am able to activate it but I do not know how to get into my old account. I tried to reset and it resetted my new account.