Lr2 wont edit in pse7 on desk top but works fine on lap top
Hi again
Question I put pse7 and lr2 on at the same time on both machines. My lap top gives me the option to edit in pse7 but my desk top does not. I installed them the same way. Does anyone know why on my desk top does not give me this option or how to turn it on??
Thanks for your help
Randy
You will need to supply details about your system really.
You can also contact Tech Support for this.
Similar Messages
-
Flash wont "register" On XP sp3 using IE7 but works fine on Safari
Hi,
I lost flash a while ago on my desktop I do not even remeber how long ago. I just downloaded safari and used that for things that need flash like youtube and such.
I would really like to fix this so it will work with Internet Explorer again however. I have read several help letters posted and tried to uninstall and reinstall and reboot many times and look for the killbit all sorts of things but no luck. When I go to control panel and click on the flash icon it says flash is installed for the safari but not for IE the version for safari is 10.3.181.34 when I am doing the install for IE it runs to 53 percent and then fails and says "error failed to register". I have ran malwarebytes and avg and ccleaner and avast antivirus thinking it had to be some sort of malware, but no difference.
If someone would take me by the hand and tell me step by step what to do to diagnose and fix this I would be estatic. So thanks in advance for any and all help offered.
Jim IIII will give this a try, I saw this before but did not do it because the "note" says it is in the "uninstaller" so that info led me astray I will post back on my results. Thanks for the quick help.
Solution
Warning! By following the directions below, you will modify the Windows System Registry. A mistake could cause serious system damage, which may require you to reinstall your operating system.
If you are not comfortable editing the registry, get help from your system administrator or another IT professional.
If you choose to proceed, first back up your entire hard drive, and create a Windows System Restore Point.
Adobe Systems cannot be held responsible for damage resulting from your following these instructions.
Note: The following solution is not required for Flash Player 10 and above. These registry changes were included in the Flash Player uninstaller and can be downloaded here.
Make sure you are logged into a Windows Administrator account. If you are not, you will not be able to use SubInACL.
Download SubInACL from the Microsoft Download Center.
Follow the installation instructions. Make sure you install SubInACL (subinacl.exe) to the directory C:\Program Files\Windows Resource Kits\Tools.
Download the reset_fp10.zip file.
Open the fp10.zip file and extract the reset_fp10.cmd file to the directory C:\Program Files\Windows Resource Kits\Tools\.
Both this file and SubInACL (subinacl.exe) must be in this directory.
Double-click reset_fp10.cmd. A command window will open, and SubInACL will run.
Do not use the machine while SubInACL is running.
After SubInACL finishes, you will see a prompt "Press any key to continue".
Install Flash Player from the Flash Player download page.
To confirm that your installation succeeded, visit the About Flash Player page. At the top of the screen, you should see a message that reads "Adobe Flash Player Successfully Installed." -
I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1. I am not sure how to do it. SOmeone please help me out.
Hi ,
In your write back XML try the below query insert
INSERT INTO TABLE_XYZ (attribute1) values (SELECT CASE WHEN @{C1}=’Yes’ then 1 when @{C1}=’No’ then 0 else null end from dual)
Regards
Rajagopal -
I have been having trouble with my Ipod touch getting a signal from my 2wire router. This is an easy set up for lap top and desk top. Now I can't seem to get the internet with my ipod. I can get the a signal with my wife's ipod 3rd generation with no problems. My old ipod i purchased in early 07. I can get a signal at the local McDonalds or Starbucks. Just not at home. Does anyone else have this problem? I ran the reset as prescribed by apple but have been unsuccessful.
The problem is most likely with your router. Follow the instructions in the router's manual to reset it. Also what security are you using? If it's WEP upgrade to WPA. The iPod sometimes has trouble with WEP "protected" routers. I put "protected" in quotation marks because WEP security is essentially useless. It can be hacked in less that 30 seconds.
-
my phone is blank, its an iphone 4, its been just vibrating for the last two hours non stop, its unresponsive to turning on or off, or even being connected to my lap top. my lap top doesnt recognise the usb...very confused.
Try a hard reset. Hold the power and the home button down at the same time untill you see the apple logo appear. then let go of the buttons
-
No voice in "mac mail" on IMac Lion 10.7.2. when I select Start speeking,
Works fine in Safari and text edit.
Also works fine in Mail on my Macbook Pro 10.6.8I Plugged Headphones in to headphone jack and selected speech in mail and could here voice through headphones.
Disconnected headphones and 'Mail' 'Speech' now plays fine through speakers ? -
Dark picture on projector but okay on the lap top?
I have problems with dark pictures when using Air Mac and a projector. Everything is okay on the lap top, but the pictures shown by the projector are very dark. Have anyone out there a solution for this problem.
I have talked to Apple support without getting any help.Helge-
Most projectors by default are set for PCs, which have a different gamma output from their monitors. You can do one of two things to fix the situation: 1) Change the gamma settings on your Mac by going to the Displays preference pane in System Preferences, choose the Color button near the top, and then either pick one of the pre-calibration settings that works best for your situation, or you can manually calibrate your laptop. 2) You can change the brightness and contrast of your projector (and if possible save the settings on there). The second method is probably best if you don't need to frequently share the projector.
~Damian -
Movie plays once on Apple TV then wont play.. BUT works fine on our iMac
Frustrated and starting to think we should have gone with ROKU / NetFlix and Amazine Online route... Cheaper and our friends have had no issues.
Some movies we have purchased both from iTunes and direct from the Apple TV only play once then wont play again (Works fine on iTune / i Mac) also the Extra content works fine.
I have been in contact with Apple support twice with no luck in solving this problem... reconfigured the apple tv to factory settings and re-synching seems to be the only solution... BUT as soon as we update the software and re-synch back to the same problem.
Note... Each time we reconfigure / re-synch a different movie has this issue... Very inconsistent
I have seen similar issues posted... We are not getting the white screen Any ideas???Welcome to the Discussion Forums.
Have you tried Repopulating iTunes with the files that you have problems with. -
links and search bars on the top half of pages dont work and its not that i click them and they dont work but it wont let me click them its like it doesnt see them
Recently, the Yahoo Toolbar and the Babylon extension have been reported to cause that problem. They seem to overlap invisibly over the top of the web page display. If you have either or both, uninstall or disable them/it, or see if an update is available that solves the problem.
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
If that does not solve the problem:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
My itunes wont load up on my computer? ity worked fine last time
i tried to start Itunes on my computer it wont load up?
Like I said:
Connect the iPod to the computer and make a backup by right clicking on the iPOd under Devices in iTunes and select Back Up. When you right click a menua comes up and you select Backup.
To restore see:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
Before you restore just make sure that all yur synced items like music and video synced to the iPOd are on the computer since those items are not in the backup. For what is in the backup see:
iTunes: About iOS backups -
Urls wont open from page clicable links and bookmarks work fine
My computer recently crashed and i did a system restore to another date and i had to update my java and adobe,
since then my urls wont open if i type a complete url and hit enter it just wont go not enter not by clicking the arrow it just wont move but if i do a bookmark or link its fine ,
its only when i type in the address,
for those addresses i cant type i just use google and from the search i open them thank you !!Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
My macbook pro will not start up. Its charging and fully charged but wont start. Was fine till yesterday when keyboard stopped typing and then shut down and now wont start up
If after an SMC reset it will not power on then I suggest you take it to an Apple store or Apple Authorized Service Provider for a diagnostic check and estimate of repairs.
Apple store Genius reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country -
My laptop would not sync to my iPad because the iPad is hosted on my desktop. So it said to me to delete my library on my desktop. I do not want to do that as I have all my music on my desktop. I did home sharing. But when I tried to sync my iPod to my desktop. It froze up. I had to shut down everything to recover. Now I do not want to fire up iTunes on my desktop as it will freeze up again. Anyone with some ideas to fix this?
Thanks
JBYou can only play 720p video.
Download the 720p or standard def version. -
We currently migrating over to http server from SunOne web server. When you run the launch.html file an additional browser window opens but the swf doesn't not start playing.
The new http server is using exactly the same doc root as SunOne.
I have swf in the mime types and i've checked all the permissions .
Conf File
Include /opt/IBM/WebSphere/HTTPServer/conf/httpd.conf
Listen 1xxxx
DocumentRoot "/www/edc/docs"
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory "/www/edc/docs">
Options FollowSymLinks
</Directory>
######### DirectoryIndex ############################################
directoryIndex index.html index.htm
IndexOptions FancyIndexing VersionSort
########## Pidfile location,Error and Access Logs #####################
PidFile /opt/IBM/WebSphere/HTTPServer/logs/edc/httpd.pid
ErrorLog "|/opt/IBM/WebSphere/HTTPServer/bin/rotatelogs /opt/IBM/WebSphere/HTTPServer/logs/edc/error_%Y-%m-%d-%H:%M 86400 -360"
CustomLog /opt/IBM/WebSphere/HTTPServer/logs/edc/access_log common
CustomLog "|/opt/IBM/WebSphere/HTTPServer/bin/rotatelogs /opt/IBM/WebSphere/HTTPServer/logs/edc/access_%Y-%m-%d-%H:%M 86400 -360" common
LogLevel warn
# The following directives define some format nicknames for use with a CustomLog directive
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
Alias /icons/ "/opt/IBM/WebSphere/HTTPServer/icons/"
<Directory "/opt/IBM/WebSphere/HTTPServer/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>Hi,
I would suggest you read the following thread:
Windows Media Server Did not Accept HTTP or RTSP streams???
http://social.technet.microsoft.com/Forums/en-US/winservermedia/thread/b3f4f8c9-ac36-49e6-adc7-21e744d2e28f
In addition, please check whether the following blog could help:
Play "mms" and "rtsp" Streams in Windows Media Player
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks,
Vincent Wang
TechNet Community Support -
Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version
Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.
Maybe you are looking for
-
Hi Experts, I am new to BEx. I am facing some issues in variable creation. I have two infoproviders(composite provider in my case). One infoprovider is loaded with ECC data and another infoprovider is loaded with transaction data. In reporting layer,
-
How do I install CS 2 on Mountain Lion?
Post hard drive crash and replacement I am reloading my CS versions back on the mac. My initial full purchase is CS2 CDs. I have the CS5 and 5.5 upgrades as well. The Adobe Install on CS2 disc now is not working because "power PC applications are no
-
Memory Leak in Preview.app when switching Display Profiles
I found a weird memory leak in Max OS X Preview.app, which manifests itself when Display profiles (color calbration) is change. I wonder if anyone else can reproduce my experience. 1. Open up "System Preferences" -> "Displays", switch to the "Color"
-
Why do I have to answer security questions every time I download an app
Not sure why I have to answer my security questions every time I try to download an app? How do I change that setting?
-
Use of Partner Function in WBS authorization
Hi all, Considering the following scenario: " I have a few users, User A, B and C who are all authorized users to the various project system functionalities. However, I would like to set up authorization in such a manner that each project/ WBS elemen