LR3.2 RC hangs when using spot edit

Hi,
I have a strange problem with spot edit:
Seem to happen only with a jpg file (around 6 MB).
- view at 100% in Develop
- open spot edit, size 66 for instance
- indicate a target to be healed
- when the second circle appears, grab it and begin to move it.
At this movement, LR will hang, froozen with the cursor in the fist shape. You can wait as long as you want, it doesn't recover. The cursor can be moved but you can't close the program. It has to be killed with task manager.
This is under Windows7 64-bit Home premium on a laptop with an i7 CPU at 1.60 GHz with 4 GB RAM and NVIDIA GeForce GT 230M.
LR takes up about 25% of the CPU when this happens and Memory is around 1.9 GB.
I can reproduce this in a new catalogue, with just one picture in it and spot edit being the first step. So, no impact from catalogue size or edit history.
I had this with LR3.0 and installed the LR3.2 RC hoping this would be fixed as well but it is not.
When the photo is fitted in the Develop window, this does not happen.
When the second circle is not moved, this does not happen either.
I did file a bug report for LR3.0 as well as for the LR3.2 RC.
Just wanted to check if anybody else has this problem or if there are any ideas for a work around.

LR3.4.1 64bit has problems printing to Adobe PDF. Some of the selected pictures do not show up in the PDF or lightroom crashes with the following error log:
%%[ ProductName: Distiller ]%%
%%[ Error: syntaxerror; OffendingCommand: --nostringval-- ]%%
Stack:
/build_pattern
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
I was able to print to Adobe PDF with version 3.2.

Similar Messages

Wacom pen hanging when using spot removal brush

Whenever I use my new wacom tablet to attempt to clone or heal a line, the white spot stops after a short space and the program hangs. I can still move the cursor, but do no work. Eventually, it recovers, sometimes going on with the action, sometimes not. The mouse works correctly with this action. I am using LR 5.3 on Windows 8.1 64 bit. Does anyone have a suggestion for a fix?

Lightroom 5 uses the equivalent of ACR 8.x and the Latest ACR Plugin available for PS CS5 is version 6.7.
When you use the "edit in function" from Lightroom you should be getting a warning dialog that offers the choice of "Render using Lightroom" or "open anyway". If you wish all the edits done in Lightroom you need to choose "render using Lightroom" if you choose "open anyway" then ACR 6.x may not be able to apply all the edits done by Lightroom.
If you do not see the missmatch warning it is because it was turned off in a previous session. From the Lightroom main menu bar go to ""Edit >Preferences >General tab > under Prompts select Reset all warning dialogs""

Crash or freeze when using Spot Removal

I am having problem with my lightroom 4.2, when I try to use the clone tool my computer crash or keep not responding can anyone help to understand what may be happening ?
Message title was edited by: Brett N

yes it is Windows 7
Date: Sat, 27 Oct 2012 14:46:54 -0600
From: [email protected]
To: [email protected]
Subject: Crash or freeze when using Spot Removal
    Re: Crash or freeze when using Spot Removal
    created by Geoff the kiwi in Photoshop Lightroom - View the full discussion
Is that Windows 7.You can look in the Help Menu in the Menu bar for Lightroom and under System Info you will find what is being asked for.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4805402#4805402
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4805402#4805402
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4805402#4805402. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

WLS 8.1 hanging when using XA

I am having an issue with BEA 8.1 hanging when using XA. I have configured it
on several other Windows 2000 machines and not seen an issue. This particular
machine seems to hang and then give a time out error. ANy suggestions would
be appreciated. Below is the error that I am getting back and a thread dump.
java.lang.Exception: Exception while commiting Tx : Name=[EJB com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)],Xid=BEA1-001E3F8C31D9BB58DEB7(18601996),Status=Unknown,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=122,seconds left=2878,XAServerResourceInfo[lidPool]=(ServerResourceInfo[lidPool]=(state=new,assigned=none),xar=null),SCInfo[mydomain+brettjason]=(state=active),SCInfo[ds9FT+ds9server3]=(state=active),properties=({weblogic.transaction.name=[EJB
com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=brettjason+10.1.44.74:7001+mydomain+t3+,
XAResources={},NonXAResources={})],CoordinatorURL=ds9server3+10.1.19.141:7001+ds9FT+t3+);
nested exception is: javax.transaction.SystemException: Timeout during commit
processing
Exception while commiting Tx : Name=[EJB com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)],Xid=BEA1-001E3F8C31D9BB58DEB7(18601996),Status=Unknown,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=122,seconds left=2878,XAServerResourceInfo[lidPool]=(ServerResourceInfo[lidPool]=(state=new,assigned=none),xar=null),SCInfo[mydomain+brettjason]=(state=active),SCInfo[ds9FT+ds9server3]=(state=active),properties=({weblogic.transaction.name=[EJB
com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=brettjason+10.1.44.74:7001+mydomain+t3+,
XAResources={},NonXAResources={})],CoordinatorURL=ds9server3+10.1.19.141:7001+ds9FT+t3+);
nested exception is: javax.transaction.SystemException: Timeout during commit
processing
"ExecuteThread: '12' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x2
770EB70 nid=0xa34 in Object.wait() [2868f000..2868fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054801B8> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '11' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x2
76E6858 nid=0x5f8 in Object.wait() [2864f000..2864fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480230> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '10' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x2
76E5C70 nid=0x670 in Object.wait() [2860f000..2860fd88]
at java.lang.Object.wait(Native Method)
- waiting on <054802A8> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054802A8> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '9' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
6E50B0 nid=0x9c8 in Object.wait() [285cf000..285cfd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480320> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480320> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '8' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71B350 nid=0x9bc in Object.wait() [2858f000..2858fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480398> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480398> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '7' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71BC10 nid=0x7b8 in Object.wait() [2854f000..2854fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480410> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480410> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '6' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71D7D8 nid=0x848 in Object.wait() [2850f000..2850fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480488> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480488> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '5' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71C8F0 nid=0x9dc in Object.wait() [284cf000..284cfd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480500> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480500> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '4' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71C798 nid=0x824 in Object.wait() [2848f000..2848fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480578> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480578> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '3' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
60B420 nid=0x770 in Object.wait() [2844f000..2844fd88]
at java.lang.Object.wait(Native Method)
- waiting on <054805F0> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054805F0> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '2' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x26
F9FA10 nid=0xa64 in Object.wait() [2840f000..2840fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480668> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480668> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '1' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
580CC0 nid=0x8d8 in Object.wait() [283cf000..283cfd88]
at java.lang.Object.wait(Native Method)
- waiting on <054806E0> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054806E0> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '0' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x26
F8F6B0 nid=0x7a0 in Object.wait() [2838f000..2838fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480758> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480758> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"Signal Dispatcher" daemon prio=10 tid=0x008B4850 nid=0x978 waiting on condition
[0..0]
"Finalizer" daemon prio=9 tid=0x008FF7F8 nid=0x73c in Object.wait() [26cff000..2
6cffd88]
at java.lang.Object.wait(Native Method)
- waiting on <052A72C8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <052A72C8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x008FE370 nid=0xa08 in Object.wait() [26
cbf000..26cbfd88]
at java.lang.Object.wait(Native Method)
- waiting on <052A7330> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:426)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:113)
- locked <052A7330> (a java.lang.ref.Reference$Lock)
"main" prio=5 tid=0x002358F8 nid=0x8a8 in Object.wait() [6f000..6fc40]
at java.lang.Object.wait(Native Method)
- waiting on <052A7508> (a weblogic.t3.srvr.T3Srvr)
at java.lang.Object.wait(Object.java:426)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:1170)
- locked <052A7508> (a weblogic.t3.srvr.T3Srvr)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:384)
at weblogic.Server.main(Server.java:32)
"VM Thread" prio=5 tid=0x008FD138 nid=0x88c runnable
"VM Periodic Task Thread" prio=10 tid=0x008B3390 nid=0x8bc waiting on condition
"Suspend Checker Thread" prio=10 tid=0x008B3E68 nid=0x524 runnable

Running Windows XP (even fully patched up with SP3 and latest fixes), you probably will have an increasing risk of Windows and IE being attacked. Windows XP has been getting security patches every month for over a decade. So it seems likely that people will continue to discover vulnerabilities in Windows XP that, over time, will be exploited (i.e., used in attacks).
Windows 8.1? For a good experience, you probably would be better off getting a new computer than installing 8.1 on a system that is several years old. I realize not everyone's budget permits.
What else can you do? It remains useful and important to keep your third party applications, such as Firefox, and your browser add-ons, such as Flash, up-to-date. It's also a good idea to run quality security software. And practice safe browsing habits like avoiding questionable websites and peer-to-peer networking, and being suspicious of email attachments.

LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program

Hello!
We have the following problem:
LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program
We freshly installed LabView 8.2 (2006) and NI-DAQ 7.4.4 on a PC running Windows XP (Service Pack 3). We built a larger vi that remotely controls a traditional NI-DAQ card (AT-AO-10) on a second PC via NI-VISA 5.0.3. We were successfully running this program until a power failure caused the first computer to crash. After this crash we were unable to start the program again: LabView freezes while loading the vi. LabView itself can be started but freezes when adding I/O operations from the NI-DAQ palette to a block diagram.
We have tried to re-install NI-DAQ 7.4.4, but it did not help. We then re-installed all NI software, but still no improvement. In the end we decided to reinstall ALL software, first Windows XP, then LabView and finally NI-DAQ 7.4.4. This worked. However, after a few days of running the program we had to abort LabView via Windows Task manager and afterward we again experienced the same problem as before: LabView freezes when loading the program.
Obviously, we cannot afford to reinstall Windows every time. Are there any known Windows XP / NI-DAQ issues that might cause the freezing of LabView? We would be very grateful for any idea.
Best regards,
Matthias

Hello Sprice,
Browse the shipping examples according to “Directory Structure” and then select
DAQ to find the Traditional DAQ examples.
There a lot of examples that are written for counters (Counter >>
daq-stc.llb >> Count Edges (DAQ-STC).vi).
What kind of signals are your photons creating? Are they TTL compatible at a certain
frequency? You don’t care about overwriting
your buffer?
Respectfully,
Rob F
Test Engineer
Condition Measurements
National Instruments

I have just upgraded to Yosemite and now Photoshop Elements freezes when using spot healing or clone stamp, is there an update due?

I have just updated to OSX10.10 Yosemite and now Elements freezes when using spot healing or clone stamp.

If you are using track pad, please use mouse and see if your issue is resolved.
Moreover, this issue has been resolved in PSE 13. You can give it atry as well.
Thanks!!

When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

I suspect that beautify doesn't touch CSS that it is not aware of (e.g. new properties/syntaxes, vendor-prefixes). See if there's a newer version available.
Which compressed CSS are you using? Most CSS libraries come with both compressed and original stylesheets, so use the original one during development/debugging, and switch to the compressed one for deployment.
Randy

How do I get Content-Aware back when using Spot Healing Brush?

How do I get the Content Aware Button back at the top of the page when using Spot Healing Brush?

I think you're on the healing brush tool rather than the spot healing brush.

Camera is hanging when using with flash

Hi Lenovo Team,
In lenovo vibe x2, camera is hanging when using with flash.Getting "Lenovo snapit isnt responding" error and screen hanged for sometime.after that when tried to open camera "Cannt cannot to camera " error is coming till when restart the phone.
Even tried Factory reset and software update.
Please provide the solution for the above issue.
Thanks,

Hi vijayprabhu,
I just tested the X2 however am not having the issue. I set flash to always on then took a picture using SnapIt however its fine.
Please check if you have the latest firmware S125.
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Application hangs when using ProcessStartInfo and Process.WaitForExit.

I've looked on different threads about this, but all of them uses the Process.RedirectStandardOutput = True, which I don't.
I'm trying to open a process (console application, not made by me) to make it compile a special .acs file to a .o file. The structure is simple, the only argument is the file you want to compile.
But on certain files my application hangs when trying to open the process. Here's my code:
Dim p As New Process
Dim ps As New ProcessStartInfo
ps.Arguments = SavePath 'Path example: "C:\Program Files (x86)\Zandronum\File.acs"
ps.FileName = Path.Combine(System.AppDomain.CurrentDomain.BaseDirectory(), "Script Compilers\Zandronum\acc.exe")
ps.CreateNoWindow = False
ps.ErrorDialog = False
ps.UseShellExecute = True
ps.WindowStyle = ProcessWindowStyle.Hidden
ps.WorkingDirectory = Path.GetDirectoryName(SavePath)
Dim ErrorCaptured As Boolean = False
Try
p = Process.Start(ps)
Catch ex As Exception
ErrorCaptured = True
End Try
If ErrorCaptured = False Then
p.WaitForExit()
End If
If ErrorCaptured = True Then
Exit Sub
End If
Thanks!
//Visual Vincent
EDIT:
For starting the process I use pretty much the same code that another guy made in C#. And his code is working perfectly...
// Setup process info
processinfo = new ProcessStartInfo();
processinfo.Arguments = args;
processinfo.FileName = Path.Combine(this.tempdir.FullName, info.ProgramFile);
processinfo.CreateNoWindow = false;
processinfo.ErrorDialog = false;
processinfo.UseShellExecute = true;
processinfo.WindowStyle = ProcessWindowStyle.Hidden;
processinfo.WorkingDirectory = this.workingdir;
try
process = Process.Start(processinfo);
catch(Exception e)
// Unable to start the compiler
General.ShowErrorMessage("Unable to start the compiler (" + info.Name + "). " + e.GetType().Name + ": " + e.Message, MessageBoxButtons.OK);
return false;
// Wait for compiler to complete
process.WaitForExit();
I hope your day has been better than yesterday, but that it's worse than tomorrow...
Please mark as answer if I solved your problem. :)

Hi,
Have you compared the FileNames and Arguments of ones that work and ones that don`t? Is there any difference in them such as the ones that work do not contain blank spaces in the FileName or arguments and the ones that do work don`t contain blank spaces
in them? If you find that to be the problem then you need to add Quotes to the beginning and end of the FileName or Arguments.
My first guess is the Arguments needs the Quotes like this because, i see blank spaces in your example of the Arguments.
ps.Arguments = Chr(34) & SavePath & Chr(34)
If you say it can`t be done then i`ll try it
This actually made it. I had forgotten that blank spaces makes it a new argument, silly me. I don't use process arguments that often. ;)
Thanks alot!
I hope your day has been better than yesterday, but that it's worse than tomorrow...
Please mark as answer if I solved your problem. :)

Websphere Application Server 5.1 Hangs when using Oracle Connection Pool

I have a j2ee application that runs on WAS 5.1 ( IBM JDK 1.4 ) and Oracle 10g 10.2.0 . My customer is doing load testing with 25 virtual users and a connection pool with a max size of 10. When the test starts all 25 users attempt to get a connection, and the first 10 get a connection. At this point the application server hangs with the connection pool in allocation. This is seen in Tivoli. Each thread only needs one connection to process it's request.
I have my own home grown connection pool which when used under this load does not experience and issue. Monitoring from Oracle's admin console I see a max of 10 sessions. The home grows connection pool does not use a WAS DataSource.
I have configured my application to use DB2 with a WAS DataSource and the application server does not hang. Monitoring using Tivoli shows the connection pool going into allocation, but it recovers as is expected.
Are there any known issues with the Oracle JDBC drivers when used with WAS 5.1 DataSources?
Any direction would be helpful, as I currently thing there is an issue with Oracle's Connection Pool and the IBM JVM.
Thanks,
J

just an attention call: OracleDatasource connection pool does not accept parameters such as removeAbandoned, minEvictableIdleTimeMillis, timeBetweenEvictionRunsMillis, etc, these are specific for the tomcat dbcp implementation (http://tomcat.apache.org/tomcat-6.0-doc/jndi-resources-howto.html#JDBC_Data_Sources).
For the accepted ones read this http://download.oracle.com/docs/cd/B28359_01/java.111/b31224/concache.htm
Edited by: user7428636 on 24/Jan/2011 6:22

CS5 Photomerge hanging when using many files

Hello,
I have managed to work around the issue, but it's annoying nonetheless.
The basic problem is that I've started creating very wide and tall Bokeh Panoramas or 'The Brenzier Method' http://www.ryanbrenizer.com/category/brenizer-method/
From Lightroom I select the images I want and 'merge to panorama in PS'. When I use say 2 - 30 images it's fine. However when I use say 160 (ridiculous I know) it will hang when merging the files, processor usage stays on 13%, but the progress dialogue bar doesn't animate. I tried it through photomerge and 'align all layers' from the edit menu. I reduced this ridiculous amount to 60 and if I chose the 'vignette removal' option on the photomerge dialogue it will hang on this process after starting to create the panorama. If I don't do the vignette, it will create the panorama.
I know that it will depend upon the complexity of the merge, it's just annoying that it would fail whereas Microsoft ICE will complete the panorama without fail, it just may be of a lesser accuracy due to parallax.
Other than using less images and attempting to overlap correctly, is there much else that can be done?
I'm using an up to date version of CS5 64bit windows. running on a 16gb Core i7 2600k. The merged final image occupies 13gig of ram. I have the scratch disc on a spare 2tb drive with about 1.5 tb free.
Paul

Mr_Fujisawa, I just wanted to come back on here and thank you for opening my mind to the "Brenizer Method", which I had not heard of before. I've been experimenting with it today and enjoying the results! Up to now I put effort into getting everything in focus all across my panos, which are generally landscapes. It didn't dawn on me to use stitching on subjects up close.
-Noel

Dreamweaver hangs when using double slash file includes?

When I use Dreamweaver CS6 for Web Development I experience problems when using code with double slashes, like the following:
<script src="//ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script>
Everytime I try and edit the page Dreamweaver will hang maybe 30 to 60 seconds, I believe its trying to locate the include locally which will always fail.
I have turned dynamic discovery off but it still happens, is there a fix for this issue?

Silver89 wrote:
My question is why does Dreamweaver hang and why can we not prevent that from happening?
To be completely honest, it hangs because DW isn't programmed to handle it the way we'd all like. As far as keeping it from happening, you "could" develop with the http there. I would suggest using a php include to add the link into your <head> section as the http version during development. That way, when you go live with it, you only need to change it once for the entire site. It's not the best solution, but it should do the trick and get DW to behave, until Adobe fixes the problem.
You can help bump this issue up in the list of bug fixes by adding your voice here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Sustain hanging when using midi source with multilayered sustain

when using the rp800 digital piano as midi source for a software instrument, the sustain hangs (remains on) as soon as i have depressed the sustain pedal and released it.
i think it might have to do with that the rp800 is sending several signals after how much the pedal is depressed (several degrees of sustain) which confuses garageband so when you release the pedal, garageband seems to believe the pedal is still depressed.
i've tried to see if the rp800 could be configured to send only on/off sustain but no can do as far as i can see.
anyone else had similar problem and found a workaround for it?
zitek
Message was edited by: zitek

zitek wrote:
when using the rp800 digital piano as midi source for a software instrument, the sustain hangs (remains on) as soon as i have depressed the sustain pedal and released it.
i think it might have to do with that the rp800 is sending several signals after how much the pedal is depressed (several degrees of sustain) which confuses garageband so when you release the pedal, garageband seems to believe the pedal is still depressed.
i've tried to see if the rp800 could be configured to send only on/off sustain but no can do as far as i can see.
anyone else had similar problem and found a workaround for it?
That sounds strange for a sustain pedal, which usually sends on/off only. Are you sure the pedal is plugged into the right jack? Are you sure it's not defective? Can you do a hard reset of the keyboard (which sometimes gets misbehaving controllers back in line)?
A problem I'm more familiar with is the sustain being reversed if a keyboard is turned on with the pedal in the "on" position (which it then thinks is the "off" position) which can be fixed by just turning the unit off and on again with the pedal up.
If none of that works - and no one here can think of anything else - I'd check with rp800 tech support or see if they have a forum.

ASM Hang when using ASMLIB

SR 6591645.994
ASM started as part of CRS start which will start ASM and then the database. It's hang in ASM start.
pls noted that ASM startup hang when ASM init.ora is set to
asm_diskstring='ORCL:*'
When not using ASMLIB, ie asm_diskstring='/dev/oracleasm/disks/ORA*', ASM started ok and then database started ok.
Any idea what this would happen.
Thanks
Loren

Here are the answers to the above questions;
Can you provide more details... When you first time created your ASM instances, how was this done.. using DBCA? did it hang then?
ANS: yes using DBCA but not using ASMLIB. it's running fine for a long time.
When you have this hang situation, do you have visibility to all the storage devices?
ANS: only when we tried to use ASMLIB ie change asm_string to 'ORCL:*'
Did the reminder of the CRS stack start ok? for example, the VIP, LISTENER etc?
ANS: YES all ok except ASM hang. pls note when the asm_string changed back to not using 'ORCL:*', everything works fine!
I would also try to start ASM manually to help determine where the problem could be?
Make sure the CRS is running and then start ASM via SQLPLUS.
ANS: YES, it started up ok when using sqlplus
[oracle@rhel34dev2 pfile]$ sqlplus
SQL*Plus: Release 10.2.0.2.0 - Production on Wed Nov 28 15:09:41 2007
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Enter user-name: / as sysdba
Connected to an idle instance.
SQL> startup
ASM instance started
Total System Global Area 130023424 bytes
Fixed Size 2042960 bytes
Variable Size 102814640 bytes
ASM Cache 25165824 bytes
ASM diskgroups mounted
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options

LR3.2 RC hangs when using spot edit

Similar Messages

Maybe you are looking for