LR3 64 bit stops working when I try to import photos

I recently installed, uninstalled and re-installed LR3 and in my opinion it SUCKS! Every time I try to import photos the program stalls and quits responding. It eventually (after several minutes) gives me a message that "Lightroom has stopped working and will close." When I installed it, I created a new catalog and did NOT upgrade my existing LR2 catalogs so there shouldn't be any cross contamination with older file metadata as suggested in other posts. Has anyone else experienced this problem? My OS: Windows Vista 64-bit, 8GB RAM. I didn't have any problems with LR2, nor do I recall this being a problem with LR3-beta. Needless to say....I am NOT happy at the moment!!!!

I had this problem with LR2, seemed to work Ok but when I was downloading Photos it would crash, ended up being a bad MB for me and this happened to me a second time as well and found out the processor wasn't Seated correctly, it was heating up, re-seated it an NP since!
I'm not a Geek and know very little about this stuff, the first time I had a problem with this I took my puter to the local Micro-Center store, my brother builds, upgrades my puters for me and the parts came from Micro-Center, they diagnosed the Bad MB (Gigabyte) and replaced it for free and my brother spotted the heating problem with the MB! I think in this incident I got a bigger power supply and new fan?
Don't know if this is your problem or not? Just trying to help, I had no other problems except for when downloading Photo's, does this take extra processing power?

Similar Messages

  • I get a message that itunes has stopped working when I try to sync photos

    I get a message that itunes has stopped working when I try to sync photos. Error message says "APPCRASH ..."
    Can anyone help? Thanks.

    I found the file but when I added it to the  list for the Data  Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

  • Elements 10 stops working when I try to save photos to a memory card. I was successful 1X, failed3X

    Succeeded oncesaving photos to a memory card, but 3times, Elements 10 stopped working when I tied to save.  What's up?

    I had the same problem with Photomerge panorama (PS Elements 9) on my new Windows 8.1 HP laptop.
    I found a post over on a thread about CS5 talking about dual video graphics drivers. My laptop has both Intel and Nvidia chips and drivers, and after I disabled the Nvidia driver in Windows Device Manager, so that I use only the native Intel graphics, Photomerge Panorama comes up fine. My external big monitor looks crisper with the Nvidia graphics enabled, but I can re-enable that easily after I am done with Photomerge.

  • ITunes stops working when I try to import missing music files

    I don't know why, but every time I try to import missing music files into iTunes, a pop up suddenly comes up saying iTunes has stopped working. Does anybody know if it may just be a bug in the program or anything like that? Because of this, I am now having to manually reimport the missing files which takes forever!! Please help!!.

    Hello, onedirectionlover1993. 
    Thank you for the question.  Try the steps in the article below as they may help you resolve the issue that you are experiencing with iTunes becoming unresponsive.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Jason H.

  • Excel has stopped working when I try to launch Excel 2013 Powerpivot

    Redirected from the Win 7 forum: (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-has-stopped-working-when-i-try-to-launch/01460690-abab-495f-ab5f-904f72f88668)
    My system is a Windows 7 machine, 64 bit
    I previously had Excel 2010 32bit with 32 both Powerpivot installed.  However I am currently evaluating 64 bit Excel 2013 with Powerpivot for my company so I uninstalled Excel 2010 and installed an evaluation copy of Excel 2013 64 bit.
    However whenever I launch Excel, enable Powerpivot, then click any of the Powerpivot buttons it gives me an error saying "Excel has stopped working".
    I took a look in the Windows events logs and found:
    Faulting application name: EXCEL.EXE, version: 15.0.4420.1017, time stamp: 0x506741b5
    Faulting module name: mscorwks.dll, version: 2.0.50727.5477, time stamp: 0x5265c8ee
    Exception code: 0xc0000005
    Fault offset: 0x00000000002ba203
    Faulting process id: 0x3e8c
    Faulting application start time: 0x01cf52a7644eda9d
    Faulting application path: C:\Program Files\Microsoft Office\Office15\EXCEL.EXE
    Faulting module path: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll
    Report Id: afa4f824-be9a-11e3-94ac-415645000030
    I have tried uninstalling and re-installing as well as doing a Repair on my .net framework, which is the latest version.

    You can go to check the dll file, what's size of this dll file?
    If the file size is 0 byte, you can check the link below:
    http://forums.steampowered.com/forums/showthread.php?t=2735528
    Also you can go to check the disabled items (File->Options->Add-ins->Disabled items->Go) to see if any dll file was disabled.
    In addition, Isn't the latest version of .NET Framework supposed to be 4.0?(Not quite familiar with this)
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
    the accuracy of this information.
    Wind Zhang
    TechNet Community Support

  • LabWindows/CVI 2013 SP2 stops working when I try to open a file using the project file menu.

    I have windows 7 on my system and sometime late last year I starrted getting a Windows dialog telling me that LabWindows/CVI has stopped working when I try to open a file from the project file menu.  I also get an error when I run a project debug mode and use a selectFilePopup in the code.  The error says, "The program has suspended execution at address 0x75D5025E.  No source line information is available."  I've tried removing and reinstalling CVI to no avail.  Any suggestions?

    Constantin,
    Thank you for your response.  I've attached screnshots showing the version details for kernal32.dll and ntdll.dll.  I also looked at the updates to see which might have been installed when the problem started.  Unfortunately there are 15-20 updates every month.  I didn't take note of when the error started to occur.  At first it only affected my ability to open files from within the project (i.e. file->open->Source, etc).  Then I went back to modify a project that had a SelectFilePopup and found that that wouldn't work either. 
    Attachments:
    ntdll.dll version.jpg ‏15 KB

  • I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I have also retarted twice...

  • Why does my adobe audition cs6 stop working when i try and make an edit in windows 7?

    why does my adobe audition cs6 stop working when i try and make an edit in windows 7?

    You might get more help asking in Audition CS5.5, CS6 & CC
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Why does my Photoshop 10 application stop working when I try to sign in?

    Why does my photoshop10 application stop working when I try to sign in?

    See this post for the reason and solution:
    http://forums.adobe.com/message/5721815#5721815

  • Photoshop stop working when i try to open it

    Photoshop stop working when i try to open it, this only happens in my gf notebook, on my notebook Photoshop works normally...
    It Don't initiate, when are on startup it just crash... Its like the image below, but Photoshop CC

    You will likely get better program help in a program forum Photoshop General Discussion
    These questions below may be for a different product... but the KIND of information you need to supply is the same, when you ask in that forum
    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • My camera is stop working when I try to use it!

    My camera is stop working when I try to use it!it close down when I open it..and it's been 2 days now that my telephone is very slow in everything..

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Why does my iTunes stop working when i try to sync music to my iPhone?

    Why does my iTunes stop working when I try to sync music to my iPhone?

    Morning Bandg72,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • I am receiving an error message that "photos has stopped respoding" when I try to upload photos to icloud photo library

    I keep receiving an error message "Photos has stopped responding" when I try to upload photos to icloud photo library.

    Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!

  • How do I stop my iPhoto from "quitting unexpectedly" when I try to import photos?

    How do I stop my iPhoto from "quitting unexpectedly" when I try to import photos?
    Whenever I try to import photos to iPhoto or even just edit photos on iPhoto, iPhoto quits unexpectedly.
    When I import a photo, before it is finished, iPhoto closes, and a message comes that says "iPhoto quit unexpectedly"
    What should I do?  How can I import my photos now? Please help!

    I have found if you iTunes open while importing photos to iPhoto it will quit unexpectedly - try closing iTunes. Also, try selecting and importing 100 or fewer photos per import...seems like it quits more often when trying to transfer large quantities (like over 200 photos).
    I wish Apple would update iPhoto with the same auto-sync feature in iTunes so I could sync photo libraries between computers without trying to figure out which ones are new (although as of this posting the other option is purchasing a 3d party photo sync program).

  • I am getting the following error message when I try to import photos into iPhoto from my camera: "/private/var/folders/GB/GBl4wh8-ELqUVMI5dO-ryU   TI/-Tmp-/iPhoto/DSCF2033.JPG".  Have already tried removing and reinstalling iPhoto to no avail.

    I am getting the following error message when I try to import photos into iPhoto from my camera: "/private/var/folders/GB/GBl4wh8-ELqUVMI5dO-ryU   TI/-Tmp-/iPhoto/DSCF2033.JPG".  Have already tried removing and reinstalling iPhoto to no avail.

    Does this happen if you try to Import to Library within iPhoto, or is it when you connect your camera (and which is set to automatically use iPhoto) that this error message occurs?
    If you open Image Capture > Preferences is iPhoto selected as the choice when a camera is connected?

Maybe you are looking for