LR3, edit in PSCS5 not working

I've been reading a few past posts on similar problems, but not with these versions so thught I should ask.
When I'm working in LR3 and want ot edit my photo further in PS5, all the "edit in" selections are greyed out except for "edit in another program (besides PS)"-LR isn't seeing PS.
I work on Windows XP with all upgrades. I had PSCS3 extended and LR 2, I purchased CS5 and LR3 and installed them and then uninstalled the old versions-I'm pretty sure that was my mistake. Do I need to uninstall and reinstall both new programs now that the old ones are gone, or just Photoshop? I read one fix that involved editing the registry, but that makes me nervous. I don't have any plug ins or anything loaded into either program yet.
Thanks,
Deb

The same thing happened to me and the only solution I found was to un-install CS5 and re-install. Just installing again over your present installation doesn't seem to work, I had to do a clean install. It apparently has something to do with the un-installing of the previous versions because mine worked fine until I un-installed CS4.

Similar Messages

The "FIND" feature in the Edit menu does not work. I can't find anything on a webpage

The "FIND" feature in the Edit menu does not work. I cannot search a page. If I am looking for the word "Doctor" and I know it is on the page. All I get after typing the first letter is that the typing box turns red.
This is not fun.

Make sure that <b>[] "Match case"</b> on the Find bar (Ctrl+F) doesn't have a check-mark.

FCP 7.0.3 ripple edit in timeline not working

FCP 7.0.3, AVCHD/proRes 422 LT, ripple edit in timeline not working. Using the ripple tool, I click on the edit point, drag the cursor to the clip and direction I want to trim but it doesn't work. pop-up says collision on V-1. Same thing when I double-click the clip to player and try to move the edit point on the scrub bar. This was functional in prior sessions. What's happening? Thx in advance.

I'm only using one (V1) track. Prior to this problem I was unable to insert edit. That problem mysteriously vanished after an unsuccessful phone support session w/ Apple failed to solve. Also when I try to insert w/transition (default cross-dissolve) the transition is applied to the opposite edit point,ie: out point of insert clip has transition instead of in point where it was applied. When I try to add transition to edit point (CMD-T) it doesn't work.
I'm slowly working around the ripple edit malfunction by using the razor tool and ripple delete (shift-delete) to trim in the timeline.

Saved Shopping Cart Display/Edit functions are not working

Hello SRM experts,
The problem that I have is that the buttons like Display, Edit, etc are not working on a saved Shopping Cart. What is the best way to debug this problem? How would I find out what methods are being called on the SRM system or if some entries are missing in some table for BUS2121?
We are on SRM 7.0 PPS SPS 5, Portal 7.01 SPS 5.0.
Thanks,
Mani

Hi Mani,
We are also facing a similar issue. Our protocol is HTTP throughout but still the issue persists.
Can you shed some light on any other config that you changed?
Regards,
Nikhil

In content editing repeating regions not working Safari 6.05 and Google Chrome v30.0.1599.66 mac? No

In content editing repeating regions not working Safari 6.05 and Google Chrome v30.0.1599.66 mac?
Marquees not showing, works perfectly fine on PC IE 9.
Can edit text put cannot duplicate regions?
Can anyone advise? Not good if the client worjs on Mac.

Marquees the HTML tag? It's the most hated HTML tag out there, most browsers removed it because it was such a pain to see in 1996 scrolling images and scrolling everything

Photo Edit in CS4 not working

Hello,
THE SETUP
I have LR 3.3 and PS CS 4 Version 11.0.2 on a Mac running OS X.6.7.
My "About Lightroom" screen reports the presence of Camera Raw 6.3.
In my LR preferences under "External Editing" tab, I have the option to "Edit in Adobe Photoshop CS4" as PSD / sRGB / 16 bit / rez 300. There is no "Additional External Editor" present.
I have installed in Library/Application Support/Adobe/Plug-Ins/CS4/File Formats the Camera Raw Plug-in version 5.7. When I choose Photoshop>About Plugin>Camera Raw I see that CR version 5.7.0.213 is present.
THE PROBLEM
When I select photo(s) [CR2 file(s)] in LR3 and choose Photo>Edit in> none of the external edit-in-Photoshop options work. First, I get a message saying "This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.3 for full compatibility."
I resent this suggestion, since that version of Camera Raw only works with CS5.
When I click "Open Anyway," PS opens and loads, but that's it. None of the images from LR appear.
I get the same (non)-results with all of the options (edit in CS4, HDR, panorama, smart object, etc.) under "Photo>Edit In." Photoshop launches, but no image appears.
The only way I can get a photo to open in PS from within LR is to choose Photo>Edit in>Edit in Adobe Photoshop CS4, and then when the warning dialog comes up about the Camera Raw plug-in version, click "Render in Lightroom." When I do that, LR renders the image and it opens in CS4. But that doesn't help me do what I really want to do, which is to select bracketed exposures in LR, merge them to HDR in CS4, and save them back to LR.
I have searched for help on this and come up dry. I did find this http://www.lightroomforums.net/showthread.php?9974-Open-as-layers-in-Photoshop-command-not -working, but I reinstalled the CR 5.7 plug-in as described and saw no change.
Any suggestions appreciated. Thanks in advance.
Message was edited by: GeorgTrakl

Lr 3.3 and CS4 are not fully compatible so your experience is the result of that.
You will have to bite the bullet and upgrade to CS5 if you dont want to "Render in LR".
I've worked for quite a while with LR 3 and CS3 and experienced similar problems - the only way out is that you select "Render in LR".
It's not such a big deal. When you select "Render in LR", Lr creates the psd that then opens in CS4.
With CS5 it works this way: The RAW file opens in CS5 but when you save in CS5 a psd is generated.
WW

Edit in Photoshop not working

Edit in Photoshop seems to have stopped working for me, both Edit and Open as Smart Object do not work. Photoshop starts but the file never opens. I'm using Lightroom 5.5, Camera Raw 8.3 and Photoshop CS6. I can of course export to a PS doc and open that.

I think the reason for this "edit-Problem" lies in the fact that you don't use PS CS5.
LR 3 does not work seamlessly with earlier versions of PS - I have worked with LR 3 and CS3 and some things worked and some didn't.
Since I have upgraded to CS 5, all is well.
WW
PS: In case you wondered, I don't get a commission if you buy CS5.
Message was edited by: web-weaver

LR2 and PS4 - merging to HDR, merge to Panaorama and Edit in Layers not working

Hi,
I've recently upgraded from LR to LR2.1 and Photoshop CS to CS4. I've been trying to multi-select images from LR2 and edit them as HDR and Panoramas using the "Edit in->" merging options.
None of them seem to work. I can see PS CS4 being opened, but then nothing happens. No image is opened or dialog box shown anywhere. Closing PS doesn't prompt for any saving, etc.
I think the problem is because my RAW/DNG files are stored on a NAS. Trying to do the merge from PS directly using the files also doesn't work. But if I copy the files to my local HDD, then things work a lot better.
Is this a known issue with CS4?
iMac, OSX Leopard, 4Gb RAM.

I have done some more tests:
Setting up CS3 as "Additional External Editor" in LR2.1 Edit/Preferences/External Editing works fine with RAW ( .NEF ) files on NAS-drive.
Also CS4 as "Additional External Editor" works the same way. The procedure is the same as when CS3 was the standard editor, ie exporting a TIFF file from LR2.1.
The difference is that the standard CS4 integration is not writing TIFF files från LR, but has a more tight integration to CS4, which is much faster. But still not working when RAW files are on NAS. ( LR catalog files are on local disk ).
Configuration:
Dell dimension 9200
Windows Vista Home Premium ( 32-bit )
D-link DNS-323 NTFS file system
Lightroom 2.1
Photoshop CS4 Extended
Latest updates installed.

Edit-in-place NOT working...

I've recently installed FCS at our small shop. I've read the Geller book, followed the Admin manual, and pretty much have gotten it to work.
However, I can't get "edit in place" to work. It did work when I initially installed the system and tested it. And now, after a complete re-install, it doesn't work.
I am using two local RAIDs. Each have a media directory that I set up as a device. For example:
One device is called "Mojo Project Media 02"
In the Device Pane (on the Admin / Client Java Interface) the Local Directory reads:
"/Volumes/RAID_02/Mojo Project Media 02"
So the Mac edit-in-place URI reads:
"file://localhost/Volumes/RAID_02/Mojo Project Media 02"
I can't get the edit in place URI to not ad "localhost" but I don't think this should matter.
Whenever I try to move media into a Browser Window from FCS, it tells me I must copy it to my local cache first. This didn't happen when I first installed/configured the system.
Can you not set up edit-in-place for a local directory (ie. a volume locally attached to the server with FCS installed)?
I know it worked before. Is there something I am missing?

Thanks A. Richards.
After much testing, I realized that on the FCSr machine that it indeed had edit-in-place status because of the storage directly attached to it. BUT the other client computers did not.
So basically, since we don't have the $1000 a seat for XSAN and we are only cutting DV and DVCPRO HD...
We could configure our Mac Pro Server to be an AFP share over the network; it's plenty fast over Ethernet since it's aggregated over 6 gigabit ports to a switch and has PCIe RAID storage attached. We could give this edit-in-place status IF...
We used another machine (server class) to install FCSr on.
This would work right?

Bulk edit media kind not working

Hello,
Last night I bulk edited my library from media kind "music" to "voice memo." This worked fine. Everything is now set to voice memo. However, I am now trying to edit selected albums back to music, and this does NOT work. But it DOES work if I select each song individually and change it.
This is incredibly frustrating.
Anyone know why this is? Or better yet, does anyone have a fix or a script that will allow me to select a batch of files and change the media kind from voice memo to music?

I discovered from a tweet by @dougscripts, that it is simply not possible to do en masse or with a script: "@dougscripts To all asking: AppleScript cannot change the "Media Kind" property of a podcast track to a music track."
(I had changed mine for the same reason regarding iTunes Match, and also unsuccessfully tried the same 2-step process.)
But, I did figure out a workaround that will save your sanity.
1. Add all the tracks you want to change into a single playlist.
2. Then use a mouse recorder (I used this one http://www.jitbit.com/mac-mouse-recorder/ ... the demo lasts long enough for you to change what you need to).
3. Record the action of changing 1 track from voice memo to music manually.
4. Set the mouse recorder to repeat the amount of times as there are songs in your playlist.
(You won't be able to use your computer while it's working, so if you have a huge library it's best to do it while you're sleeping. Also, don't speed up the playback of the action too much, as it will fail.)

Orion.edit.validator example not working

The example mentioned in the below link for orion.edit.validator does not seem to work.
https://wiki.eclipse.org/Orion/Documentation/Developer_Guide/Plugging_into_the_editor
Please help with the proper code snippet or example for orion.edit.validator

The code on that page was outdated, I fixed it.
Here's a gist showing a complete working example: https://gist.github.com/mamacdon/cb1e20fd8f967e97cfb4

Messages and edit buttons do not work. How can I fix this?

My messages & Edit buttons on the text conversation screen do not work/unresponive. Cannot get back to main messsage screen or use edit to forard or delete texts. Help??

Try a reset, see if that corrects the problem.

Edit adjustment layers not working

When I add an adjustment layer, it adds the layer but I am unable to make any changes and there is no 'pop-up' box. I can rename the layer by clicking it but it doesn't open the editing box. It worked before the last Photoshop update 5 days ago.

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/photoshop

LR3 - Select Music button not working

Good day,
I am creating a slideshow in LR3 (3.4.0), Windows XP os, and the button for "Select Music" is not doing anything. Any ideas?

Hi,
I had the same problem yesterday and 1-2 times before.
As you say the buttons Play/pause and Prev&Next are not working in the Control Center and in the Lockscreen.
But sometimes/ in most cases they work.
If you haven't done it yet, please leave a bugreprt at:
https://bugreport.apple.com
Lets hope Apple will fix this soon...

Preview with light or shade editing function is not working (black or white picture)

Hello!
I have a problem with the preview function in iphoto (version 9.4.2 on a white macbook, mid 2007, os x lion, latest version, 4 GB RAM, 500 GB HDD).
Whenever I use the light or shade editing function, the picture in the preview is getting completely black or white. If I close the editing screen, the normal preview is working with the edited picture.
I repaired the iphoto library, I tried to reinstall iphoto, I did a SMC reset but nothing worked. Yesterday, reinstalled my complete system and reinstalled iphoto but even this did not work.
Has anybody an idea how to deal with this problem? Is there a kind of BIOS funktion to activate or to deactivate like graphics boost or something like that? It would be great if anyone has an idea because editing photos efficiently is hard with my problem.
Thank you very much!

On the contrary, or at least I think so. If I remember it correctly, you can simply go to the top menu bar and click 'Photo', 'Edit in', 'Edit in Adobe Photoshop' and it will put your panorama in Photoshop so you can simply continue working on it. Hope it does the trick!

LR3, edit in PSCS5 not working

Similar Messages

Maybe you are looking for