LR4.2 issue unable to edit while syncing batches

Hi
Just updated to 4.2, Im noticing that when batch syncing in my catalogue, eg, for lens corrections, it seems that I can no longer continue to edit other aspects of my images. Previously I was able to continue with edit my workflow while the sync was working away in the background. It's really annoying because it means that it takes an age by the time I have imported, rendered, then batch lens corrections, noise, sharpening etc. Is there a fix for this and has anyone else noticed this?
Rob.

Hi Noel,
I had the same problem, but just posted a new response when I couldn't edit a previous response.
Not ideal, but the new forum at least runs much better on iOS than the previous version of the forums.
Niall

Similar Messages

Error while executing Batch Risk Analysis job in full sync mode

Hi Gurus,
I am getting following error while executing Batch Risk Analysis job in full sync mode for the first time, please help me out.
May 12, 2011 3:57:26 AM com.virsa.cc.multi.node.dao.NodeDAO deleteMTGenObjTable
INFO: In deleteMTGenObjTable() deleting from VIRSA_CC_MTGENOBJ for jobid = 100
May 12, 2011 3:59:53 AM com.virsa.cc.multi.node.dao.NodeDAO deleteMTGenObjTable
INFO: In deleteMTGenObjTable() deleting from VIRSA_CC_MTGENOBJ for jobid = 100
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchSyncAndAnalysis
INFO: --- Batch Sync/Analysis/Mgmt Report completed --- elapsed time: 104907817 ms
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 100 Status: Error
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error Job not completed
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=100, status=2, message=Error Job not completed
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>100----
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: Daemon idle time longer than RFC time out, terminating daemon [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
INFO: Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 terminiated
May 12, 2011 4:00:35 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
May 12, 2011 4:01:36 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
May 12, 2011 4:02:37 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
May 12, 2011 4:02:37 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
INFO: Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 started
May 12, 2011 4:02:38 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
FINEST: Another Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 is already running

Hi,
May be it worked in your case How the job names going to affect the execution of the job. The issue is purely because of RFC timeout (As per the logs). I recommend to change the parameter in the configuration tab as recommended by Sunny in the previous thread.
Regards,
Raghu

HT1296 whenever I try to sync my phone with itunes, it prompt with a window saying that this computer is not authorised. Although I again authorise my computer through store option but again while sync it shows the same window. I am unable to sort it out

whenever I try to sync my phone with itunes, it prompt with a window saying that this computer is not authorised. Although I again authorise my computer through store option but again while sync it shows the same window. I have reinstaled itunes also but invain. I am unable to sort it out pl help

Hello dizzy bizzy,
Thank you for providing the details of the issue you are experiencing with purchases from the iTunes Store. I recommend following the steps in the following article:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT2527 While syncing my iphone 4s, its saying unable to sync and restore to factory settings. But, My iphone 4s is factory unlocked. If I restore to factory settings will it get locked to the carrier again.

While syncing my iphone 4s, its saying unable to sync and restore to factory settings. But, My iphone 4s is factory unlocked. If I restore to factory settings will the iphone get locked to the carrier again.

vamsi Pothugunta wrote:
While syncing my iphone 4s, its saying unable to sync and restore to factory settings. But, My iphone 4s is factory unlocked. If I restore to factory settings will the iphone get locked to the carrier again.
It all depends on the definition of "factory unlocked". If the phone was purchased directly from Apple and the receipt says "Unlocked" then updating or restoring it will leave it unlocked (Apple never uses the term "factory unlocked" as there is no such thing; phones are unlocked at activation time). Similarly, if it had been locked to a carrier and the carrier authorized it to be unlocked, and you went through the unlocking steps they provided, it is permanently unlocked.
Unfortunately, a lot of the phones sold as "factory unlocked" were actually unlocked by hacking in the "factory" in the basement of some shop somewhere. These phones at best will become locked to the original carrier if restored, and in the worst case will be permanently disabled if restored.

I set up the the sync add on and had no errors.When I sync now I get"Sync encountered an error while syncing:Firefox sync server maintenance is underway..."I have gotten this mesaage for the last 10 hours.Should I wait or is there an issue with my setup?

I just loaded Firefox onto my laptop. I set up the the sync add on and had no errors. When I hit sync now I get "Sync encountered an error while syncing: Firefox sync server maintenance is underway, syncing will resume automatically." I have gotten this message for the last 10 hours. Should I wait or is there an issue with my setup? I checked the Mozilla sync server status and it listed no issues.

There was a server out last week. see below. now everything works great. thanks for the follow up.
To:
Subject: [Bug 744289] sync107.db.scl3 down
Do not reply to this email. You can add comments to this bug at
https://bugzilla.mozilla.org/show_bug.cgi?id=744289
Gregory Szorc [:gps] <[email protected]> changed:
          What    |Removed                     |Added
            Status|UNCONFIRMED                 |RESOLVED
        Resolution|                            |FIXED
           Summary|error in sync               |sync107.db.scl3 down
     Last Resolved|                            |2012-04-10 19:39:11
--- Comment #2 from Gregory Szorc [:gps] <[email protected]> 2012-04-10
19:39:11 PDT --- Well, this is embarrassing. It looks like one of our
servers was down and for whatever reason we didn't notice.
It should be working now. If you still see errors, please reopen this bug.
Configure bugmail: https://bugzilla.mozilla.org/userprefs.cgi?tab=email
------- You are receiving this mail because: ------- You reported the bug.

Unable to edite or delete text while making a book.

In iPhoto I am trying to make a book. However I am unable to edit or delete text. I can type text in - sometimes, but then cannot edit it after. Also, sometimes when I click in the text box, the text dissapears and will only re appear when I click elsewhere out side the text box.
I have checked for updates and there is none. I am up to date on it. And this is a brand new mac, it's only 3 days old.
If anyone can help, it would VERY much appreciated!!

Hi,
yes the error was the version; I was manually set it as the previous one in the WS call. Removiing the filed solved the problem about the upload issue.
The delete command gets back a null pointer exception but I think it is a XAI Ibound Service bug which tries to load the resulting BO which has been just deleted :)
Thanks,
Antonio
Edited by: Ganto on 2-feb-2011 6.11

Unable to edit the document in sharepoint2010

Hi,
I am unable to edit the document in sharepoint2010 with IE-10 while editing i am getting the error like
"The form cannot be displayed in the browser because the use of session cookies has been disabled in the current browser settings.In order to load the form the session cookies must be allowed."
Please suggest me on this.
Thanks in advance.
Regards
SidduSekhar

Hi SidduSekhar,
Based on your description, I need to verify the things below:
Which browser did you use? Did this issue occur with all the browsers?
Is the cookie disabled in the browser? If yes, please enable it.
Did you implement security fix in the web.config, such as <httpCookies requireSSL="true" httpOnlyCookies="true" />? If yes, please set it to false in web.config.
Did you configure Alternate Access Mapping for SharePoint with a URL containing a “_” character? If yes, please remove the “_” from the URL.
More references:
http://blogit.create.pt/miguelisidoro/2013/12/01/sharepoint-and-the-form-cannot-be-displayed-in-the-browser-because-the-use-of-session-cookies-error/
https://prasantabarik.wordpress.com/2014/05/03/sharepoint-2010-workflow-task-error/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Unable to edit documents in Sharepoint 2013

Hi,
unable to edit documents in SP2013.while editing getting the following error.Please guide me on this.
Thanks In advance

Hi,
According to your post, my understanding is that only
one user could not edit documents in SP2013 with OWA.
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the
IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome, Internet Explorer 10.
Check whether the user has permission to the documents.
Here is a link you can use as a reference:
http://blogs.architectingconnectedsystems.com/blogs/cjg/archive/2012/07/26/Getting-Office-Web-Apps-2013-and-SharePoint-2013-Working-_2D00_-fixing_3A00_-Sorry_2C00_-you-don_2700_t-have-a-license-to-edit-documents-with-Word-Web-App.-Please-get-in-touch-with-your-helpdesk_2E00_.aspx
If the issue still exists, please feel free to let me know.
Best Regards,
Lisa Chen

IPhone 3G lost while syncing with MacBook Air.

While syncing the iPhone and the Mac, the connection between the two devices breaks. Sometimes, I manage to sync completely the 2 machines, sometimes the syncing crashes. After many trials, I came to the conclusion that when the battery of the iPhone is not fully loaded, the Sync works. When it's full the connection breaks and error messages appear in iTunes.
In the log, I found this type of entry when the connection crashes:
05/08/09 14:01:39 [0x0-0xc00c].com.apple.systemuiserver[95] DigiHub:sendChargingCommandToDevice RequestExtraPower(kUSBPowerDuringWake) returned 500
05/08/09 14:01:39 [0x0-0xc00c].com.apple.systemuiserver[95] DigiHub:sendChargingCommandToDevice sending command with sleep: 0, wake 500
This issue make the update of the iPhone software impossible using my Mac. The upgrade crashed and I was give the following Apple support page http://support.apple.com/kb/TS1275. I tried all the procedures indicated and the only solution was to use a Windows Vista PC !
Any idea how I can solve this issue ?
Thanks
+PS. I posted this issue on the MacBook Air section+

HOLY CRAP!! I JUST GOT MINE TO START RESTORING, I WAS RUNNING 3.01 OR W.E AND AS I TRIED TO BACKUP THE PHONE IT SAID UNABLE TO BACK UP, SO THEN ONCE IT WAS STUCK AT THAT IT TOLD ME I HAD TO RESTORE THE PHONE AND DELETE ALL MY MEDIA =\ ONCE THAT HAPPENED I WAS PRETTY MUCH STUCK THERE WITH THE "ERROR 2002" SO WHAT I DID WAS I MADE A NEW ACCOUNT WITH ADMIN. PRIVE. I LOADED UP ITUNES THE 9.01 OR W.E THE NEW ONE IS, I CONNECTED THE PHONE, IT REDOWNLOADED THE 3.1 SOFTWARE AND I GUESS RIGHT NOW ITS RESTORING THE PHONE AND UPDATING, SO PRETTY MUCH MAKE A NEW USER ACCOUNT AND DO IT FROM THERE!!!

After iPhoto update some photos go black when trying to edit them and am unable to edit those photos

After iPhoto update some photos go black when trying to edit them and am unable to edit those photos. How do I fix this as this is the latest update?

If I hold down the Option key while launching iPhoto, I get the option to start a new library. Do I have to import all my thousands of photos into the new library?
In his original post the poster referenced the following. As to the new Library, see the end.
There are several possible causes for the Black Screen issue
1. *Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. *Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. *A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. *A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. *A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*If none of these help*:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the "determining apps to sync" stage of the process. If I am attempting to download app updates before attempting to

Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the “determining apps to sync” stage of the process. If I am attempting to download app updates before attempting to sync, the problem normally occurs at the first “installing app x” stage. In addition, the whole iTunes experience is extremely sluggish and will even freeze while searching for a track. Everything worked fine on Windows 7. So far, I have repaired the program several times and have checked for compatibility issues, but there is no Windows 8 option in the combo box, obtained after right-clicking the icon and selecting Properties/Compatibility. As a result, I am unable to sync my devices. If I uninstall iTunes before re-installing, will this affect my iTunes libraries? Does anyone have any suggestions?

After going by elimination to isolate if the problem was from (1) iTunes app, (2) my computer or (3) my old iPhone 4G, I figured out what my problem was.
1) First I deleted & reinstalled iTunes on my Windows PC without succes, my playlist did not changed on my iPhone.
2) I tested a successful #sync from the iMac at work.
So my conclusion is: The hard drive on my Windows PC is full and that is affecting iTunes SYNC functionalities.
So I'll do a back-up then run a "Clean Install" of my Windows OS, hoping that it will fix my SYNC problems.

Slow performance of Day 1 Sync batches in CC&B and MDM

Im running a data conversion team on a project that is integrating CC&B 2.3.1 (currently running SP3 and Framework13) and MDM 2.0 (currently running SP4)
We are using the Day 1 Sync batches to replicate data mastered in CC&B for Service Points, Contacts and Service Agreements/Usage Subscriptions into MDM.
While running the Initial Sync batches for Service Point, Contact and SA/US to MDM, the time taken taken is very long. We have tried to run the batches in both single and multiple threads ranging upto 8 threads but the performance was not improved with more threads.
While running the Initial SYnc Service Point batch from CC&B, with 8 threads and 48,060 records it took 11 hours and 41 minutes which is equivalent to just over 1 record processed per second. The overall batch run time in MDM was close to 7 hours.
While running the Initial Sync bactches for SA/US in MDM, it took a total of 31 hours to process close to 60,000 records.
This is a big concern from a Migration perspective as the volumes of data would be much more than 48,000 records. And considering 48,000 records took around 12 hours, we're concerned regarding the overall timings for all the Sync batches.
Below are the timings taken to execute the various batches for Initial Sync in MDM:
Service Point Sync (48,060 records)
F1-SYSRQ (Sync Request Sampling Monitor Batch): 2 hrs 30 minutes
F1-SAKRQ (Sync Request- Allocate keys monitor): 43 minutes
D1-SIKSP (Initial Sync Request- Resolve keys SP): 1 hr 47 minutes
D1-SILSP (Initial Sync Request- Load Data SP): 2 hours 12 minutes
Usage Subscription Sync for 60,000 records:
F1-SYSRQ (Sync Request Sampling Monitor Batch): 4 hrs 34 minutes
D1-SIIER (Initial Sync Request Error): 7 hrs 18 minutes
F1-SAKRQ (Sync Request- Allocate keys monitor): 46 minutes
D2-SIKUS (Initial Sync Request- Resolve keys US): 18 hrs
D2-SILUS (Initial Sync Request- Load Data US): 1 hr 28 minutes
Please note that we're running on Service Pack 4 for MDM.
Technical Specification of the environment that these batches are running on:
CC&B:
Online/Batch Server (Number of Servers * RAM * CPU) 2 * 4GB * 2CPU
OS AIX 6.1 TL7
JDK JDK v5.0 SR10 64-bit
Weblogic Version 10.0 MP2
Batch threads <= 8
JVM Count 2
MDM:
Online/Batch Server (Number of Servers * RAM * CPU) 2 *4GB * 2CPU
OS AIX 6.1 TL7
JDK JDK v6.0 SR8 64-bit
Weblogic Version 10.3.3
Batch threads <= 8
JVM Count 2
Has anyone seen issues with performance of these batches previously? When running the number of records processed by CC&B and received by MDM are in alignment so there is no issue in teh Fusion Middleware. It just seems that the processing speed of CC&B and MDM is poor.

Hi Amaresh - thanks for your response.
We are running batch online in our conversaion test environment. For the final Prodcution environmnet we'll be using third party software - CTRL-M.
We seem to be getting some additional speed now by running the batch with multiple threads but I'm still not convinced that this is going to be enough.

Unable to edit JCo settings

Hello,
I am unable to edit the Jco settings in any of the JCo destinations created in my portal system.
When i click on "Preview" or "Edit" option of the JCo destination, it throughs the following error msg.
Ping and Test are working fine.
SAP_R3_HumanResources_MetaData Create Preview Edit Test Ping Remove
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
    at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:286)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:251)
    at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:158)
    ... 46 more
Please Help in resolving this issue.
Thanks
Sachin

Hello Ervin,
Wanted to let folks know that your solution helped me as well. We are running NetWeaver 7.4 SPS07 and just moved our Portal database from MS SQL Server 2008 to a new database server running MS SQL Server 2012. After the move, none of our ESS applications worked and we were seeing JCo connection errors. I manually added our JCo Destinations in the local SLD, which did not solve anything. Afterward, here is an excerpt of the ESS errors we saw:
START LOG EXCERPT
500 Internal Server Error is returned for HTTP request [https://xxx.xxx.xxx:443/webdynpro/resources/sap.com/pb/PageBuilder]:
component [dispatcher],
web module [webdynpro/resources/sap.com/pcui_gp~xssutils],
application [sap.com/pcui_gp~xssutils],
DC name [sap.com/pcui_gp~xssutils],
CSN component[CA-GTF-TS-XSS],
problem categorization [],
internal categorization [-703535097].
[EXCEPTION]
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exception was thrown in preprocessing phase of application session XHU_vYZG8FTESKBSpQzBcw--a_qt4QYawfCsNOwEopIVgw--/pcd:portal_content/CustomContent/com.nku.folder.roles/com.nku.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_benefits_payment/com.sap.pct.erp.ess.area_benefits_payment/sap.com/pcui_gp~xssutils/XssMenuArea/base/. The causing exception is nested. RID=a7c267f44f0f11e4a81800000038253e ...
Caused by: com.sap.tc.webdynpro.services.exceptions.ApplicationFaultException: wdDoInit: exception thrown in this user coding area...
Caused by: com.sap.tc.webdynpro.progmodel.context.DictionaryException: TypeBroker failed to access SLD: Error while obtaining JCO connection...
Caused by: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SLD: Error while obtaining JCO connection....
Caused by: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection....
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve connection parameter for 'SAP_R3_SelfServiceGenerics_MetaData'...
Caused by: java.lang.NullPointerException: while trying to invoke the method java.lang.String.equals(java.lang.Object) of a null object loaded from field com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.userDefinition of an object loaded from local variable 'this'
at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestination(JCOClientConnection.java:532)...
END LOG EXCERPT
After that, I could not access Web Dynpro Content Administration (/webdynpro/welcome/) > Create JCo Destination or Maintain JCo Destinations. I received the error:
START LOG EXCERPT
500 Internal Server Error is returned for HTTP request [https://xxx.xxx.xxx:443/webdynpro/resources/sap.com/tc~wd~tools~admin/Explorer]:
component [dispatcher],
web module [webdynpro/resources/sap.com/tc~wd~tools~admin],
application [sap.com/tc~wd~tools~admin],
DC name [sap.com/tc~wd~tools~admin],
CSN component[BC-WD-JAV],
problem categorization [],
internal categorization [713773210].
[EXCEPTION]
java.lang.NullPointerException: while trying to invoke the method java.lang.String.equals(java.lang.Object) of a null object returned from com.sap.lcr.api.sapmodel.SAP_JCODestination.getUserHandling()
END LOG EXCERPT
After reading your reply I decided to log on to the local SLD and delete all of the JCo Destinations that I had created in the SLD. I was then able to successfully get to Web Dynpro Content Administration > Maintain JCo Destinations. I then manually created all of the JCo Destinations in Web Dynpro Content Administration and our ESS problems were resolved.
Thanks for your help!
Jill

"How to pass classification characteristics while creating batch" ?

Hi,
    I am using FM's BAPI_BATCH_CREATE/CHANGE while creating/changing batch I have to maintain classification data aswell.But in FM docu i saw as shown below
1.Create the classification of a batch in the background (object characteristics only)
2. If the batch is to be classified, you must specify a class in the BatchControlFields parameter. Only single classification is possible.
According to above statments I have passed class name in Batch Control Fields but I am unable to find " How to pass classification characteristics while creating batch". Please tell me how to pass classification characteristics in background?
Edited by: Vijay Babu Dudla on Dec 16, 2008 3:24 AM

Hi, You can update classification for a batch using the following code.
But first, you'll need to find out that the batch management is cross-plant or plant dependant.
If it is cross plant then plant(WERKS) is not part of the key to BAPI_OBJCL_CONCATENATEKEY.
CLEAR: objectkey, objectkeytable, objectkeytable[],
           allocvaluesnumnew, allocvaluesnumnew[],
           return.
    objectkeytable-key_field = 'MATNR'.
    objectkeytable-value_int = matnr.
    APPEND objectkeytable.
    objectkeytable-key_field = 'CHARG'.
    objectkeytable-value_int = charg.
    APPEND objectkeytable.
* Only if Batch management is Plant dependant
    objectkeytable-key_field = 'WERKS'.
    objectkeytable-value_int = werks.
    APPEND objectkeytable.
    CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
      EXPORTING
        objecttable    = objecttable
      IMPORTING
        objectkey_conc = objectkey
      TABLES
        objectkeytable = objectkeytable
        return         = return.
    allocvaluesnumnew-charact = "characteristic name goes here".
    allocvaluesnumnew-value_from ="characteristic value goes here".
    APPEND allocvaluesnumnew.
    allocvaluesnumnew-charact = "characteristic name goes here".
    allocvaluesnumnew-value_from = "characteristic value goes here".
    APPEND allocvaluesnumnew.
    CALL FUNCTION 'BAPI_OBJCL_CHANGE'
      EXPORTING
        objectkey                = objectkey
        objecttable              = 'MCHA' " MCH1 in case of cross-plant batch management
        classnum                 = classnum " Classification class number, as used in MSC2N
        classtype                = classtype " Classification class type, as used in MSC2N
*   STATUS                   = '1'
*   STANDARDCLASS            = STANDARDCLASS
*   CHANGENUMBER             = CHANGENUMBER
*   KEYDATE                  = SY-DATUM
*   NO_DEFAULT_VALUES        = ' '
* IMPORTING
*   CLASSIF_STATUS           = CLASSIF_STATUS
      TABLES
        allocvaluesnumnew        = allocvaluesnumnew
        allocvaluescharnew       = allocvaluescharnew
        allocvaluescurrnew       = allocvaluescurrnew
        return                   = return
* Do not forget to commit, otherwise changes would not take effect.
commit work.
Regards,
Hashir Ahmed

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

LR4.2 issue unable to edit while syncing batches

Similar Messages

Maybe you are looking for