Lr4.3 apple osx 10.8.2 module diaporama impossible

lr4,3 - apple osx 10.8.2 module diaporama
"Une erreur s'est produite lors de la tentative de changement de modules."

Vous pouvez réinstaller Adobe 4.2 jusqu'à le fixer http://www.adobe.com/support/downloads/detail.jsp?ftpID=5487
(thanks Google Translate!)

Similar Messages

Will Lightroom 5 work in Apple OSX Yosemite?

Will Lightroom 5 work in Apple OSX Yosemite?

It works, but there are two problems. One is that the Map module doesn't work for some people: Lightroom: Issue with Map module in OS X 10.10 (Yosemite) and there is a color management problem in the Develop module that was already present in Mavericks that Adobe has finally acknowledged and is fixing now : Lightroom 5: ICC profiles clipped shadows under OSX

WLAN Security, Is Apple OSX Safer at public sites?

Hi, I am opening this up for a technical discussion for people that actually know the answers, Apple Techs please!
In the article
http://www.lanarchitect.net/Articles/Wireless/SecurityRating/
It leads you to believe only WEP enabled WLAN connections should be used, but in reality I am not that concerened about a neighbor piggy backing my home WLAN as I am concerned about some AH hacker stealing my personnal internet passwords and such, either at home but more of concern at hotel WLAN, public hot spots and now the fake mirror hot spots that are being used for cyber mining for credit card and other financial info.
My Question is this, is Apple OSX protected enough so that if by some accident you did connect it to a fake but working WLAN for internet use, can it be hacked without me knowing it? And part two, are passwords easy to get when using a 128 bit encrypted browser at https web sites like yahoo mail login, or a cradit card login site? In other words how much info can be stolen through the WLAN "airport on" state of the Mac and when is internet info at most risk? Are https login sites safe for passwords? I assume once you are in, and the site goes to http that all interent data is now easy to see? Or is the web browser still protecting it via 128 bit encryptiion? Thanks for any tech support only anwsers to this.
Ti PB 550 Mac OS X (10.3.9) netscape 7.2

Any time you use a public wireless access node that provides no security then your computer is vulnerable. The likelihood of being hacked, however, is probably extremely low, but you can take some precaution by enabling the built-in firewall (Sharing preference pane.) You can also avoid sending anything that contains sensitive information you may not wish compromised when accessing a public WiFi node.
Many hotels that offer wireless access are usually behind routers and/or require local access authorization for guests only. But not all do.
As for protected networks Apple recommends using WPA2 rather than WEP because the latter is less compatible with Macs and is also an older technology.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Will CS6 Design Standard (Photoshop, Illustrator, InDesign) (also CS5 Photoshop Ext.) work in Apple OSX Yosemite?

Will CS6 Design Standard (Photoshop, Illustrator, InDesign) (also CS5 Photoshop Ext.) work in Apple OSX Yosemite?

What is wrong with Adobe that they do not address this situation. I work in a town that has a major design school and the students (who can't afford CC) are all out of luck running CS6 on the recent (Feb 1) update to Yosemite.
The whole Adobe community should be pressing them on this situation...as well as Apple. Don't these companies converse!

I have an Apple osx 10.6.8. I am prompted to install Yosemite but advised I will lose Appleworks. Would I have to buy an updated Appleworks?

I have an Apple osx 10.6.8. I am prompted to install Yosemite but advised I will lose Appleworks and some games. Would I have to buy an updated Appleworks?

Regarding converting AW files, you may wish to consider posting in the AppleWorks forums. It's where the AW experts hang out at.

Software to install the A3950Q laserjet 2840 all in one? Apple osx 10. +

Where can i download the correct software to install the A3950Q laserjet 2840 all in one? Apple osx 10. +

Hi,
A print driver is available via Apple Software Update.
Scanning however is no longer supported on the latest OS X versions, as you may find listed below:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03411613#N100BA
You may find the steps to install the print drivers in the following link:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03413323#N10066
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I would really find a draw application "iDraw" maybe, very useful to create diagrams and overlays on photographs. Is Apple likely to add a module to ilife or iWorks? Failing that, can anyone suggest a freeware, or shareware app? Studio8 update? alan b

I would really find a draw application "iDraw" maybe, very useful to create diagrams and overlays on photographs. Is Apple likely to add a module to ilife or iWorks? Failing that, can anyone suggest a freeware, or shareware app? I recall an app some years ago,Studio8 ? It would be really useful for work and home use. regards,alan b

Describe exactlhy what you want to do with photos? There are some apps, like Pages, that can add text and graphics over photos. Describe what you are wanting to do or post an example from somewhere else and we may be able to suggest an app.
OT

Will CS6 Design Standard (Photoshop, Illustrator, Indesign) work in Apple OSX Yosemite?

Will Lightroom 5 work in Apple OSX Yosemite?

What is wrong with Adobe that they do not address this situation. I work in a town that has a major design school and the students (who can't afford CC) are all out of luck running CS6 on the recent (Feb 1) update to Yosemite.
The whole Adobe community should be pressing them on this situation...as well as Apple. Don't these companies converse!

Cant download apple OSX file

What adobe product will help to download an apple recovery disk ? file extension is DMG.

What has this to do with Adobe? DMGs are OSX system files and mount as virtual volumes. That's all there is to it.
Mylenium

Seagate Black Armor NAS 440 / 420 with Apple OSX 10.5.8-10.6 is a BAD IDEA!

Heads up to Apple users. We purchased a Seagate Black Armor NAS 440 for use with a multi user environment and found it was incompatible with any 10.5.8 or 10.6 OSX users. This fact was confirmed by Seagate Tier 2 or "Very Hard Problem" (they call it this not me) support office.
We confirmed the tech specs as published by Seagate and unfortunately the development of this product was timed prior to 10.5.8 and 10.6 and has yet to be patched.
After migrating 6 TB of data we discovered the issue, and had to rollback. If Seagate had published the correct tech specs we could have avoided wasting 2 days of work and inconveniencing our users.
Bottom line save yourself the trouble, and do not buy a Seagate NAS if your running OSX in your environment.

Have to agree. And it would take a simple fix (according to the linux/unix geeks on the forums) which seagate doesn't see viable enough to implement. Most of what I read says go WD.

Illustrator CS4 SDK on Apple OSX 10.6 Snowleopard and Xcode 3.2 howto

I can't compile any of the samplecode from the current illustrator CS4 SDK
ai_cs4_sdk_mac_367 on an Apple Mac with OSX 10.6 snow leopard (SL) and Xcode 3.2
(see some errormessages at end)
The documentation mentions Xcode 2.4.1.
Is it possible at all to use this SDK 367 with snowleopard and Xcode 3.2 ?
If not, then how do you plug-in writers update your illustrator plug-ins for working on Snowleopard ?
thx, j.
some of the errors I get while compiling the 'Tutorial' samplecode for "10.6|Debug|i386" are :
../../illustratorapi/illustrator/AIRaster.h:221: error: conflicting declaration 'typedef long unsigned int uint32'
/Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Security.framework/Headers/cssmco nfig.h:69: error: 'uint32' has a previous declaration as 'typedef uint32_t uint32'
AIPlatformFileDlgOpts::AIPlatformFileDlgOpts()
../../illustratorapi/illustrator/AIUser.h:381: error: extra qualification 'AIPlatformFileDlgOpts::' on member 'AIPlatformFileDlgOpts'
/Applications/ai_cs4_sdk_mac_367/Adobe Illustrator CS4 SDK/samplecode/Tutorial/Resources/Tutorial.r:20:0 SysError 0 during open of "TutorialID.h".

thanks mrwren, for your confirmation that you could compile the
samples from ai_cs4_sdk_mac_367. I searched further and found e.g. the following fixes:
sample: Tutorial
1. AIRaster.h
below #define BRAVO_TYPES:
//typedef unsigned long uint32;//loj outcommented
2. AIUser.h
/*AIPlatformFileDlgOpts:: loj commented out*/ AIPlatformFileDlgOpts()
: fCount(0), fFilters(NULL)
3. TutorialID.h
add the file Tutorial.h to the Groups&Files section of the Tutorial.xcodeproj window
by dragging it from the finder into this Groups&Files section
(The right click > "Add > Existing Files … " did not let me do this (file was gray although rwx-access))
I compiled for "10.6 | release | i386" and the resulting plug-in Tutorial.aip
did load well into AI CS4 14.0.0 and worked OK.
sample: Annotator:
changed project settings
-Architectures > Base SDK : "/Developers/SDKs/MacOSX10.4u.sdk" changed to "Mac OSX 10.6"
(I installed snowleopard without the optional 10.4 support)
-Deployment > Mac OSX target : 10.4 changed to "Mac OSX 10.6"

Reinstalling drivers on apple OSX 10.9

Printer HP 8610
Mac OSX 10.9
Having had some general permissions problems I reset permissions for the computer. After this printing would not run: the queue would open, but be paused, resuming was not possible.
I deleted the HP application, redownloaded from HP, and started to reinstall. At this point the installer programme would not open the .pkg file. The message suggested damage or permissions as a problem. At this point I used a know to work version of the drivers (previously stored on another computer). The same problem occured.
Any suggestions for how to sort this?
Thanks.

Hey tiedbowtie,
Thank you for visiting the HP Support Forums! I see you were running into some permissions problems on your Mac running the Mavericks 10.9 Operating system, this cause problems when trying to install your HP Officejet 8610.
Please go ahead and follow the steps listed below:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers
I hope this helps, please let me know the outcome!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Can Apple OSX server replace my Cisco router?

I run a small business. I have 5 computers (windows) & a network printer. I have a Cisco router routing internet access to all of these computers. The router is connected to a T-1. The T-1 is to the ISP.
What I want to do is use and apple computer with OSX server to route the internet to these computer. I also want to only allow certain websites to be accessed through the server. I may also set up a VPN. May also host a website.
Can I do all this with OSX server? How difficult is it?
Thanks
Ray

So based on what you are telling me...
- "limited knowledge when it comes to servers and cisco routers...."
- "the cisco has been up and running for a looong time without any problems"
I would not recommend you change to OS X Server as your NAT router.
To fully manage NAT on OS X Server, you need to do command-line editing for port mapping. Even with experience, I would prefer to leave that function to the router.
I've had good luck with linksys when it comes to basic routing requirements. I'm not sure what trouble you had in the past, but for me they've been very stable and great bang for the buck.
If you would like to block specific sites, for < $100 this router will provide NAT and a pretty decent set of firewall features:
<a class="jive-link-external-small" href="http://">http://www.linksys.com/servlet/Satellite?childpagename=US%2FLayo ut&packedargs=c%3DLProductC2%26cid%3D1130276636538&pagename=Linksys%2FCommon%2FVisitorWrapper
If that link doesn't work, it's model# BEFSX41
Jeff

LR 5 is up to date but when i try to open it i see it flash on the screen and then doesn't open. I am running apple OSX 10

also note that my PScc2014 is up to date but my panel of NIK filters will not work message that there is a filter module interface problem how can this be resolved. They still work on my old PS CS6?

problem resolved withe help from adobe and google. All related to the new mac OS and required removing old plug ins and reinstalling new .
It took quite a while ut with help from Adobe and Google, it all worked out

Lightroom 1.3.1 Printing Problems with Apple OSX 10.5 (aka Leopard)

Whilst the majority the majority of Leopard related print issues were addressed when Adobe updated Lightroom to 1.3.1 and printer vendors released updated drivers some issues remained and it has been left to users to establish workarounds. One such proven workaround is presented below:
Information and text by Jason Hicking
I've been having exactly the same issues running a nearly identical system but on a MacBook Pro with an external Eizo 24" monitor for critical work. My results also mirror yours ie slightly greener and darker prints from LR than PS.
I've spent literally hours troubleshooting this as I own a digital imaging company that offers printing and colour management to our customers, many of whom have the same setups and same issues. Well I'm glad to say that I seem to have found a (temporary) fix. Read on and let me know your thoughts...
If you go into the Apple ColorSync Utility (in the Utilities folder on your hard drive) then follow these steps I'm pretty sure you'll get accurate prints that match Photoshops output.
Step 1 Open ColorSync Utility and click on the Devices button at the top of the window.
Step 2 Click on the grey arrow to reveal the Printers list
Step 3 Click on the grey arrow next to "EPSON Stylus Photo R2400"
Step 4 Locate the profile that relates to the media setting that was used when you created your custom profile. For example I create most of my custom profiles for gloss or satin media using the Premium Semi Gloss media setting so in Colorsync Utility I choose "SPR2400 PremiumSemigloss"
Step 5 Click on the arrow next the text "Current Profile:" and choose Other...
Step 6 From the window that opens, choose the profile that you are using to print through in Lightroom, as an example I choose "R24 IlfSmGls PSG NCA" as this is the profile I made to print on Ilford Smooth Gloss and the one I'm selecting in Lightroom.
Step 7 Click on OK to accept this change and ensure that it's actually changed in the ColorSync Utility window. If everythings OK then close Colorsync Utility and return to Lightroom.
Step 8 Print from Lightroom, choose the exact same profile and rendering intent that you would normally, click on the Print... button, make sure the preset is set to Standard then select the matching media setting and quality settings that were used to create the profile (as you would when printing from Photoshop), remember to check that No Color Adjustment is set in this part of the driver.
Step 9 Click on the Print button and in a minute or so you should get a print that matches your Photoshop output and more importantly matches your 'calibrated' screen.
Step 10 Presuming this works save this setup as a template in Lightroom for future use.
This may seem long winded in text form but it's a one time operation and I wanted to make sure that every step was included for clarity.
What I feel is happening is that there is a double profiling issue with print stream from Lightroom to the the Epson driver (v6.12) and by selecting the identical profile in both places we are ensuring that no conversion takes place in the driver, something that simply setting "No Color Adjustment" usually achieves in Photoshop and other older applications that use a different print stream to Lightroom. Also note that even when your profiles are set this way in the Colorsync Utility there is no difference in accuracy or colour when you leave it set like this and print as usual from Photoshop.
Attached screenshot of ColorSync Utility provided by Ian Lyons
A Lightroom print tutorial is also provided at: http://www.computer-darkroom.com/lr_13_print/lightroom_print.htm

Well, maybe, CS3 is the only one fully compatible, but Photoshop CS and CS2 will work...mostly. There are a couple of niggling little problems, but I have been able to do what I want, one way or another, with CS1. Elements 2 is, like PS7, a dead letter in Leopard, but Elements 3 and 4 work. Of course, these older programs run in Rosetta, being non-Intel native, and so my MacPro runs them at the same speed as my old G4 dual 800. I'm looking forward to a speed boost when my Xmas upgrade to CS3 is installed.
Francine
Francine
Schwieder

Lr4.3 apple osx 10.8.2 module diaporama impossible

Similar Messages

Maybe you are looking for