LR4.4 and now LR5 does not display photos in filmstrip or Library module

I have been using LR4.4 and now upgraded to 5. My only problem has been neither versions display the photos in filmstrip or the Library module
after being imported. It displays blank frames and you can click on one in Develop and it will show the photo. But its obviously very hard to identify a specific photo if you can't see it in Library or Filmstrip.
I have read various manuals and don't see the answer as it is assumed LR does this. Nikon View NX2 on the same computer works fine.
I also wonder could there be a conflict between the Nikon View NX2 program and Lightroom.
Greg.

If you are able to import the images then the problem is not NikonTransfer or ViewNX.
This may be a bad monitor profile or incompatible video drivers. 
See if there is an update for your video drivers.
Set your monitor profile to sRGB-whatever instead of one from the manufacturer that may not be compatible with LR.
You can go one step future and calibrate your display by hand using this process (for Windows 7):
http://www.sevenforums.com/tutorials/5823-display-color-calibration.html
It is better to calibrate your display with a hardware device such as a Spyder, ColorMunki or i1Display.

Similar Messages

  • I upgraded iTunes on my pc and now it does not recognise any of my iPods or iPhones?

    I upgraded my pc with the new iTunes and now it does not recognise my iPod or iphone

    The apple ID as I did not see anywhere just for email address , but then the ID is the email address, original ID does not work with new or old password, but is displayed on the apps page on iPod when trying to update apps, so ID is changed on PC and all is well it is the iPod that isn't

  • Product Revenue Bookings and Backlog Dashboard does not display any data

    Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
    They are able to see just the parameters.
    Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
    What can I check?
    Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
    Screenshot is at:
    https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
    Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
    Any ideas?

    hi
    We have faced the similar problem after the upgrade to 10G
    What we did was
    Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
    we were able to get the data once the clear and load is completed successfully
    Regards
    Ramesh Kumar S

  • I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC.  I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display.   Any suggestions?

    To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network.  If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen.  Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB. 
    Any suggestions for making the Import button appear?

    I hvae the EXACT same issue
    I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
    I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
    what do i do
    windows 7 64 bit

  • I updated to iTunes 10.7 and now iTunes does not see my iPod Touch.  It says the Apple Mobile Device USB Driver cannot be installed.

    I updated to iTunes 10.7 and now iTunes does not see my iPod touch.  After the update I got a message that the Apple Mobile Device USB Driver could not be installed.  I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem.  I have followed the suggested fixes in Apple Support.   Any suggestions?  Thanks!

    Try the actions here for that driver.
    iOS: Device not recognized in iTunes for Windows
    I would first do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • TS3999 icalendar does not work on my PC, it continues to get an error message.  It worked before and now it does not anymore

    Icalendar no longer works on the PC that I am using.  It did in the past and now it does not.  Coincidentally, this happened after my iphone was stolen and it was replaced with the iphone 5s.  Does it have to do with my settings?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?

    Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?
    We prepared simple Word Press web site. We used a Revolution slider plugin with HTML5 video layer. It works properly on Chrome, Safari, older Mozilla FF.
    But we had a problem on PC computers with FF 29.0 30.0 – after reinstall of browser everthing seems to be OK. The slider works. Unfortunately even the reinstallation on Mac computers does not help. There is no visible video on Mac FF 30.0.
    We are looking for some information what we can do to solve this problem. Could you help?

    Can you play the video on YouTube?
    *http://www.youtube.com/watch?v=Ugh2YvHU7D0#t=58
    Note that Mac lacks support to play MP4 files natively without using a Flash player.

  • My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

    My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

    Right click the heading at the top of the message list and select From from the list of options.

  • Upgraded to iTunes 8.1.1 and now iTunes does not recognize iPod

    I recently upgraded to iTunes 8.1.1 and now iTunes does not recognize iPod. The iPod says "Do Not Disconnect" but the device is not listed in iTunes so it will not sync.

    Hey, we are having exactly the same problem! My old ipod died a slow death so I bought a new nano 16gb 4th gen and I can't use it as itunes isn't recognising any ipod being plugged into it. I've been through the whole support database and every USB port is working on the laptop, so I know the computer is recognising its there its just itunes itself - even removed and downloaded it again but no change! If anybody has any ideas what is going on please let me know!!!!

  • I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

    I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

    I'm not clear on exactly what it is you're asking, but if you're referring to changing opacity, you can change the opacity setting for the States of a menu item via the States panel and Control Strip.

  • When I burn a disc from a playlist in iTunes, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

    When I burn a disc from a playlist in iTunes on my MacBook, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

    No, this standard has been implemented for several decades.
    How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
    It is just conceivable you burned a CD that exactly matched one already in the Gracenote database.  Gracenote uses track count and duration to decide what CD it is you have in a computer.  If you have one that matches that it will label it.  You could conceivably even have one that matches it that is not the correct one.
    This script will only work on Macs:
    http://dougscripts.com/itunes/scripts/ss.php?sp=cdtexttocdinfo - script to use CD-text file on CD to label CD in iTunes

  • I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.

    I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.  It keeps telling me that this router is not supported.  There is no firmware to roll back to.  It worked fine until a power outage.  HELP!

    If your Internet Service Provider is Cable follow this link to configure the router.
    If your Internet Service Provider is DSL follow this link to configure the router.

  • I have updated ITunes and now it does not work

    I have updated ITunes and now it does not work. It worked before the update was installed, now it doesn't. I cannot un install it either...

    Use this application to uninstall iTunes and all related components
    http://support.microsoft.com/mats/program_install_and_uninstall/en-us

  • I recently went from 10.4 to 10.6 and now itunes does not open when my phone is connected.

    I recently went from 10.4 to 10.6 and now itunes does not open when my phone is connected. I have an iphone 3.

    Connect your iPhone to your computer. Select it under Devices in the source list left side of the iTunes window.
    Select the Summary tab from the menu.
    Select:  Open iTunes when this iPhone is connected.

Maybe you are looking for

  • Moving Ipod from PC to Mac Messed UP?

    I was almost there moving my Ipod music after changing settings to manual, coping Itunes folder from pc to Ipod and then I connected my Ipod to the Macbook, all my music folders were there but I did something to adavnced on Itunes application and now

  • Creation of an existing entity bean does not throw a CreateException

    Hi. I am using update 1 with oracle 9i thin driver. I am currently working on a unit test that handles CreateExceptions if creation of a duplicate entity occurs. To test this I preloaded my db and then tried in my code to create an entity with the sa

  • Notification for Budget approval

    Dear Experts, Is it possible to trigger notifications for budget approvals, I mean, as and when user allocates budget in CJ 30 notification should go to the responsible person (Manager, CFO or MD) based on the budget amount? i.e.,  If the amount is X

  • Regarding grants in JAVA

    Hi, the file is not getting created in the specified directory. it gives an error "Access permission is denied for read, write and delete" Kindly help me with this error. please see the code below. v_sub_dir_path := v_sub_dir_path || '\RPT_ID_' || to

  • How to  run the life cycle planning in interactive planning

    Hi every body, Can any one explain me how to run the lifecylce planning in interactive plannings ? i am getting an error messages when i run the lifecycle planning ..'no records from infocube " I added 9amatnr keyfigure in my pos recently for life cy