LR4 doesn't seem to be exporting geolocation data, or Flickr isn't reading it

Not sure where the problem lies, Lightroom or Flickr, but since this just started happening in LR4 I'm starting there...
I've geotagged a number of photos in the map module, and none of them are carrying over the location information on flickr publish.
I've definitely told flickr to allow my location data to be imported. The photos clearly show the coordinates in their metadata in the map module. The locations on those photos are not marked as private.
Any ideas?
Thanks.

Thanks, but I'm using publish, not export, for my sync, and the publish settings has "remove location data" unchecked.
I noticed on some photos the Metadata Status is "Has been changed" and others it's "Up to date" -- I'm trying a publish now to test the theory that this is what's causing it.
EDIT: it's not clear what is going on but things seem to be working now. The only thing I did that may have changed things is to check "remove location metadata" from my flickr publish settings, save the settings, then uncheck the box then save again. Perhaps this cleared the setting properly? Perhaps the value was actually correctly written instead of displaying a false default? Not sure without checking the source code

Similar Messages

Time Machine doesn't seem to backup my recent data

I have a porblem that TM doesn't seem to be backing up my recent data.
If I enter TM, the 'Now' tab on the timeline shows me exactly what is in my folders, or in iPhoto etc.
If I go back to even the most recent TM date (eg 1 hour ago) then my recent data is missing. Specifically, I can see data from a about a month ago, but nothing kore recent than that is shown. So folders has no recent files, and iPhoto has no Events added in the last month or so.
I first picked this problem up in January, and what I now notice is that my data definitely refects changes since January. So this seems to not be a problem with TM working with my user account (I have multiple user accounts on the iMac, and TM is working for the others). TM is working but seems to have a lag of about a month!

Doug:
I don't have an answer for you, but I noticed the same problem while spot checking my backups, as I occasionally do. Troubling, if I can’t depend on TM to back up properly.
Booting into Safe Mode (the only “simple” remedy I could find on the Internet) did nothing.
The missing files all occur within the last month. Although the missing files are IN my home folder, most new files in my home folder ARE properly backed up, including the Desktop Folder.
At the same time, I noticed that the problem seems confined to one group of subfolders. As an experiment, I duplicated the enclosing folder (renamed as “xxx copy”), performed a Time Machine backup, and found THAT folder would back up properly. So, the contents of “xxx” won’t back up, but duplicating it as “xxx copy” WILL back up.
I can also move all of the original CONTENT of “xxx” to a new folder, and it WILL back up properly.
I can also place a new file in the original problem folder "xxx", and it WILL back up. (Go figure.)
There’s something about the enclosing folder “xxx” that won’t allow folders/files after a certain date (about a month ago) to be backed up, whereas a duplicate of it WILL back up. At the same time, putting a new file in "xxx" WILL back up.
Now I’m worried about what other folders might be a problem. Fortunately, I back up twice with an off site system . But I would like to know what’s wrong with TM, so I can depend on it. Hopefully someone can weigh in with a proper diagnosis and "fix" so we can depend on TM again.

I need to be able to export the data from health kit and read it in something. Anything.

I've tried pretty much everything from Excel to downloaded and online apps. I'm done downloading crap to my brand new computer. My problem is that I need to be able to export the data into a readable format so that I can give it to my dr(s). Is there ANY WAY that this is possible? I'm kind of at my wits end here. All help/suggestions are appreciated.
What I've done:
1. Exported data. It creates an xml file that can be opened in excel but gives raw data that no one but egghead developers can read (and I use that term in the best possible way.)
2. Tried to download an excel add on. Didn't work.
3. Tried several online applications. Same result as Excel.
Somehow this data has to be able to be read by someone other than myself, on my phone.
Thanks to one and all for the many, many suggestions that I'm about to get.

sam.loomis1234
The only way out of Premiere Elements 11 is via export in video format (except for jpegs or audio under Publish+Share/Computer/Image or audio).
The video is whole, not in a project file (project.prel).
And, the Premiere Elements 11 project.prel does not appear to be an After Effects supported project format
http://helpx.adobe.com/after-effects/kb/supported-file-formats-effects-cs4.html#main_head1
Have you asked this question in the Adobe After Effects Forum regarding supported formats?
http://forums.adobe.com/community/aftereffects_general_discussion
ATR

Oraenv doesn't seem to work

Version : 11.2.0.3
Platform : Oracle Linux 6.3
oraenv doesn't seem to work as shown below. I haven't set ORACLE_SID in the .bash_profile as this server is going to have multiple DBs in future. So, I need to use oraenv script to set env variables.
Trying to source oraenv file.
$ . oraenv
ORACLE_SID = [oracle] ?
Ideally, it should prompt the SID listed in /etc/oratab file. So, in this case it should be something like
$ . oraenv
ORACLE_SID = [oracle] ? GRCFMS
Here are the contents of my /etc/oratab file and .bash_profile
# su - oracle
$
$
$
$
$
$
$ whoami
oracle
$ pwd
/home/oracle
$ cat .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
        . ~/.bashrc
fi
# User specific environment and startup programs
#PATH=$PATH:$HOME/bin
#export PATH
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/dbhome_1
#export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$PATH:$ORACLE_HOME/bin:/usr/bin:/bin
$
My oratab file
$ cat /etc/oratab
# This file is used by ORACLE utilities. It is created by root.sh
# and updated by either Database Configuration Assistant while creating
# a database or ASM Configuration Assistant while creating ASM instance.
# A colon, ':', is used as the field terminator. A new line terminates
# the entry. Lines beginning with a pound sign, '#', are comments.
# Entries are of the form:
#   $ORACLE_SID:$ORACLE_HOME:<N|Y>:
# The first and second fields are the system identifier and home
# directory of the database respectively. The third filed indicates
# to the dbstart utility that the database should , "Y", or should not,
# "N", be brought up at system boot time.
# Multiple entries with the same $ORACLE_SID are not allowed.
GRCFMS:/u01/app/oracle/product/11.2.0.3/dbhome_1:N
$
$
$

Max wrote:
Version : 11.2.0.3
Platform : Oracle Linux 6.3
oraenv doesn't seem to work as shown below. I haven't set ORACLE_SID in the .bash_profile as this server is going to have multiple DBs in future. So, I need to use oraenv script to set env variables.
Trying to source oraenv file.
$ . oraenv
ORACLE_SID = [oracle] ?
Ideally, it should prompt the SID listed in /etc/oratab file. So, in this case it should be something like
$ . oraenv
ORACLE_SID = [oracle] ? GRCFMS
Here are the contents of my /etc/oratab file and .bash_profile
# su - oracle
$
$
$
$
$
$
$ whoami
oracle
$ pwd
/home/oracle
$ cat .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
        . ~/.bashrc
fi
# User specific environment and startup programs
#PATH=$PATH:$HOME/bin
#export PATH
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/dbhome_1
#export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$PATH:$ORACLE_HOME/bin:/usr/bin:/bin
$
My oratab file
$ cat /etc/oratab
# This file is used by ORACLE utilities. It is created by root.sh
# and updated by either Database Configuration Assistant while creating
# a database or ASM Configuration Assistant while creating ASM instance.
# A colon, ':', is used as the field terminator. A new line terminates
# the entry. Lines beginning with a pound sign, '#', are comments.
# Entries are of the form:
#   $ORACLE_SID:$ORACLE_HOME:<N|Y>:
# The first and second fields are the system identifier and home
# directory of the database respectively. The third filed indicates
# to the dbstart utility that the database should , "Y", or should not,
# "N", be brought up at system boot time.
# Multiple entries with the same $ORACLE_SID are not allowed.
GRCFMS:/u01/app/oracle/product/11.2.0.3/dbhome_1:N
$
$
$
if in fact you did exactly as posted above, the su - oracle established a new process which knows nothing about the previous invocation of oraenv
BTW - never use OS "root" when dealing with Oracle DB

I want to find the best way to send my pictures from Aperture to CVS for processing. How do I do that? Also, there doesn't seem to be a good app to go from Iphone to CVS either. Please help

How do I easly send my pictures from Aperture to CVS for actual printing? I always have trouble finding my photos in the Aperture library when I need to load them into the CVS web interface. I can't even tell which photos they are without seeing them.
Also, what's the best way to do it from my Iphone. Doesn't seem to be a good app for that.

Export the adjusted version from Aperture to the Desktop. Download the exported version to CVS.
You shouldn;t be looking in the Aperture library (if by looking you mean using the Finder on the library). Use Apertures tools to do this. Besides the only thing you could get out of the library would be the original file that you imported into Aperture not the version with your adjustments.

Dnscmd's OpenAcl option doesn't seem to change DNS record permissions

I'm creating DNS A records with dnscmd /recordadd, and I can't see a difference in the A record's permissions whether I use the OpenAcl option or not. Is this normal?
I was expecting with OpenAcl to see permissions similar to Write permissions for Authenticated Users or something. Instead I can't see any difference in the permissions at all and the permissions for non-admins are Read permissions for Everyone.
The DCs run win 2008 R2 SP1. The syntax I've been using for dnscmd.exe is:
dnscmd /recordadd mydomain.com mycomputer /aging /openacl A 192.168.0.123
I want to migrate from Infoblox DNS to AD-integrated. So I'm expecting to export to csv from Infoblox, reformat the csv file a bit and use dnscmd.exe to read the reformatted csv and create DNS records in AD. I'll also enable the option on the Windows computers
to register their DNS records.
I think that the records that dnscmd.exe creates in AD won't have permissions that allow the Windows computers to overwrite them unless I use the OpenAcl option. But OpenAcl doesn't seem to make any difference to the permissions. Very confusing! Thanks for
any help.

Thanks Kumar and sorry for replying so late. What you said is correct and what solved my problem was running Windows Update. I was testing using W2K8 R2 with SP1 but no updates after that. After I ran Windows Update, then creating a DNS record using dnsmd.exe
with the /OpenAcl argument did indeed set the permissions on the DNS record so that Authenticated Users could write to it.

It doesn't seem to be as sharp as it is in the "Develop" mode. This seems to occur more with wide angle than macro. Any suggestions would be extremely welcome...Norm

Here's my problem: (Lightroom 4) I will edit a photo in "Develop" to the point where it looks great and I'm satisfied with the results. Then I click back to "Library" and the photo seems to go a little out of focus. When I export the photo, it doesn't seem to be as sharp as it is in "Develop" mode. This seems to occur more with wide angle than macro. Any suggestions would be greatly appreciated! Norm

Okay guys, some good news!
First of all, thanks again to Sean for his suggestion to look inside the transaction log!
Indeed that specific table that I noticed was filling the transaction log, is the largest table in my database. Its size stands at about ~65GB. Like I said earlier, it has no LOB or Overflow columns. But one interesting fact about it is - it had absolutely
no indexes! It was a heap, but it was also partitioned. I didn't know a case like this could cause such problems with shrink? It's weird but it also kinda makes sense in a way.
Anyways, I ran a script to create a partitioned clustered index on that table. That took pretty much all day long due to the table size (almost 7 hours). But once that was finished, shrinking the data file was a breeze!
At least... Until the shrink started "hanging" again because now it started dealing with my
second largest table (~55GB). Like the first one, this one is also a partitioned
heap without any indexes. So I expected this to happen. I guess the solution this time will be the same: Create a clustered index.
Does this make sense to you? A partitioned heap table causing such heavy workload to SHRINK, but when it's moved to a clustered index, suddenly it flies?
Eitan Blumin; SQL Server Consultant - Madeira SQL Server Services

I have recently got pages and have tried to upload my CV (using pages) to certain graduate jobs and it doesn't seem to register them as still asks me to 'select a file'. Does anyone else have this problem?

I have recently got pages and have tried to upload my CV (using pages) to certain graduate jobs and it doesn't seem to register them as still asks me to 'select a file'. Does anyone else have this problem?

Menu > File > Export > Word or PDF
Virtually no businesses have Pages to be able to read .pages files.
Definitely not those with PCs, because there is no version of Pages for PCs.
Peter

Mini dvi to s-video/composite adapter doesn't seem to work?

basically i'm trying to hook my rather new 2.53 ghz mac mini to my tv, which basically has rca inputs. so, having seen several laptops hooked to this tv as simply as using an s-video to composite adapter, i figured it would be as simple as getting the mini dvi to composite adapter and i'd be good. well, for some reason this doesn't seem to do anything. the other weird thing is that when i hook the cable from the composite adapter to the tv, i get a buzz out of the speakers as the connection is being made. why is a video signal having anything to do with the audio? plugging my playstation 2 into the same input works fine. why the difference?

Boece wrote:
!http://images2.monoprice.com/productmediumimages/47241.jpg!
+
!http://images2.monoprice.com/productmediumimages/48501.jpg!
That's the setup I've used. Works great for video and photos, but webpage text can be difficult to read.
I used the yellow composite input rather than the s-video. My old tv is inside an “entertainment center” type tv stand and is so friggin heavy, it’s a pain in the axx to move, so I just used the composite plug on the front of my tv. Since the Mac mini is sitting in front of the tv it works great:-)
http://discussions.apple.com/thread.jspa?threadID=2430645&tstart=0
Message was edited by: James Press1

Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Wacom Tablet doesn't seem to work all of the time?

I have a Wacom Intuos 3 tablet, not more than a year old. I recently installed it onto my Macbook Pro and it worked fine, but when I unplugged it and came back to work with it later, it doesn't seem to work. The mouse doesn't respond to where I click on the pad.
So, I've reinstalled this a couple of times and was able to make it work perfectly, but today when I went back to work in photoshop, it doesn't seem to be responding again.
Does anyone have any tips? I know that Leopard likes you to eject USB devices instead of just pulling them out of the slot, but I don't see anywhere to eject it.
Does anyone know what's up?

Downloaded a driver from website, tablet works now.

HT3235 I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" I bought mid 2009 to my old TV, the adapter doesn't seem to fit any of the connections, is this the right adapter?

I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" that I bought in mid 2009 to my old TV (svideo), the adapter doesn't seem to fit any of the connections on my macBook pro, is right adapter?

Shootist007 wrote:
Apple doesn't offer a MDP to AV or componet connect . Only DVI and VGA. They also don't offer one to HDMI. You have to go aftermarket to get one to HDMI.
Quite right, but as the OP does not have component or composite connections not important.
To the OP, this does work, but is not the cheapest, and as it appears that Apple no longer sell an SVideo adaptor cable 3rd party it will have to be.

1.burned a hole in my screen can I get this repaired? 2. Even though I have it set to open up to a blank screen, no web pages, my computer (safari) continuously opens with multiple safari sites open. It doesn't seem to matter what I do, it just reverts

1. I burned a small hole in my screen, is that fixable/replaceable? 2. Even though I have my 15" MacBook Pro set to open to empty screen when I open Safari, it constantly opens multiple previous pages. It doesn't seem to matter what I do it just reverts back to opening multiple pages. Major security risk, my bank pages have popped back up after my computer has been shut down, account numbers and all. I took my computer to an Apple store and the genious there tols me... "honey, you can't hold your laptop on your lap, that's the problem, it's getting too hot" he honestly said that. Could someone please help me? Thanks

Apple doesn't call its portable machines 'notebooks' instead of 'laptops' for nothing - using a MacBook Pro in your lap can cause some burns on your skin, poor ventilation, etc. So use it on a hard flat surface - not your lap, pillows, bedclothes, etc.
As for burning a hole in your screen, you'll have to revisit the Apple Store and see how much they would charge for a new screen. It's likely to be a bit expensive.
And if you've Safari set to re-open tabs when you restart, you can disable this feature -> Safari-Preferences-General.
Good luck,
Clinton

How does Azure Compute Emulator (or the Azure one) determine if a role is web project or something else ("The Web Role in question doesn't seem to be a web application type project")?

I'm not sure if this is F# specific or something else, but what could cause the following error message when trying to debug locally an Azure cloud service:
The Web Role in question doesn't seem to be a web application type project.
I added an empty F# web api Project to a solution (which adds Global.asax etc., I added an OWIN startup class Startup etc.) and then from an existing
cloud service project I picked Roles and
chose Add
-> Web Role Project in solution, which finds the F# web project (its project type guids are 349C5851-65DF-11DA-9384-00065B846F21 and F2A71F9B-5D33-465A-A702-920D77279786),
of which the first one seem to be exactly the GUID that defines a web application type.
However, when I try to start the cloud project locally, I get the aforementioned error message. I have a C# Web Role project that will start when I remove the F# project. I also have F# worker
role projects that start with the C# web role project if I remove this F# web role project. If I set the F# web project as a startup project,
it starts and runs as one would expect, normally.
Now, it makes me wonder if this is something with F# or could this error message appears in C# too, but I didn't find anything on Google. What kind of checks are there when starting the emulator and which one needs
failing to prompt the aforementioned message? Can anyone shed light into this?
Sudet ulvovat -- karavaani kulkee

Sudet,
Yeah you are right, the GUID mentioned seems to be correct and the first one i.e. {349C5851-65DF-11DA-9384-00065B846F21} means the web application project which compute emulator uses to determine while spawning up role instances.
You might want to compare the csproj of your C# and F# web projects which might give some pointers.
Are you able to run your F# web project locally in IIS? If yes then you will definitely be able to run it on azure so I will recommend to test it in IIS Express first.
Here are some other tips which you can refer or see If you are yet to do those settings
1. Turn on the IIS Express - You can do it by navigating to project properties
2. Install Dependent ASP.NET NuGets / Web Api dependencies (If there are any missing), Reference System.Web assembly
Also I will suggest to refer this nice article about how to create a F# web Api project
http://blog.ploeh.dk/2013/08/23/how-to-create-a-pure-f-aspnet-web-api-project/
Hope this helps you.
Bhushan | http://www.passionatetechie.blogspot.com | http://twitter.com/BhushanGawale

My apple tv is registering on my tv - i can see it on my system info screen but the apple tv doesn't show up, as well my imac doesn't seem to let me share - so i don't know whats wrong, why my apple tv isn't working

anybody able to help me with my setup for apple tv. i've followed the directions in the guide and my tv doesn't seem to register in part. it's weird because my tv system info identifies the apple tv but the screen never went black and it doesn't show anything, too, my imac doesn't seem to register the apple tv unit either

I would try connecting it to another tv to see if it works there if it does
then likely your tv can't handle the default resolution and you should lower it on the other tv
if not then you should connect it by usb to the computer and use itunes to restore it's firmware

LR4 doesn't seem to be exporting geolocation data, or Flickr isn't reading it

Similar Messages

Maybe you are looking for