LR4 Map Changes when Geotagging

I'm trying to geotag 73 images. I have them highlighed and I search on the map for the required location (Galway Ireland). When I drag the images across the map, it changes to another location (Tipperary Ireland) with the marker showing "68". I have previously tagged some images in that location.
Can anyone tell me why this is happening please and how to correct it. I have a deadline looming and time is ticking away while I struggling with the new technology!
It's not a long way to Tipperary from where I am - but it could be a long time before I geotag these images!
Thanks for any suggestions.
Stephen

Thanks for that, as I needed to move on fairly quickly, I did just as you had suggested, earlier. But thanks for the reply.
Perhaps someone else will know if the map will not over-write co-ordinates already in place and that deleting and re-setting is the only option in this case?
Stephen

Similar Messages

TS1424 apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Tha

Apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Thanks

Please please help me, if you know how.

IDOC Segment mapping change

Hi,
How can i change the field attached to a IDOC segment.
Actually we have this Invoice IDOC,in which the E1EDK03 012(Qualifier) is passing the IDOC creation date instead of Billing date.
So i need to change this mapping to Billing date.
Please help.

Hi Salz,
I just checked my version of SAP (4.7) and you should get an invoice date. Check out the subroutine FILL_E1EDK03 in function module IDOC_OUTPUT_INVOIC. The first section of this code creates an E1EDK03 segment with the invoice date (if there is an invoice date), with qualifyer 026.
Is there a possibility that in fact you are getting an E1EDK03 segment with the invoice date, but you are also getting other E1EDK03 segments (such as the one you mention with qualifyer 012) and they are obscuring the one you are looking for?
If there are definitely none being created then can I suggest that you debug the subroutine FILL_E1EDK03 in function module IDOC_OUTPUT_INVOIC to check what is happening. You may need to change the timing of your output record to 1 and run the program RSNAST00 online to get the breakpoint to be hit correctly.
If, in your version, the code doesn't include this date, then you have an exit function module EXIT_SAPLVEDF_002 (called via the subroutine CUSTOMER_FUNCTION in function module IDOC_OUTPUT_INVOIC) where you can actually add your own segment data. For example you an change the contents of an existing segment (as per your original request), or append your own E1EDK03 segment with your own data. I would recommend adding your own segment rather than changing whats there.
It is possible to extend idocs to add your own custom segments (eg Z1EDK03), but I wouldn't recommend it in your case, because in later versions of SAP the date is provided and by not creating a new segment (Z1EDK03) you will have no mapping changes to do when you upgrade. You can just delete your userexit code.
Hope that all makes sense and helps you with your problem.
Cheers,
Brad

Exception setting SOAP address to $CHANGE-WHEN-DEPLOY$:

Am trying to call the Credit Rating Service using the 10.1.2 version of BPEL engine using the JDeveloper Designer. Have no problems calling the Credit Rating Service through the console tester but when my BPEL process called SynchBPELProcess2 calls the credit rating service I get the following error:
Your test request generated the following exception/fault:
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{summary=exception setting SOAP address to $CHANGE-WHEN-DEPLOY$: no protocol: $CHANGE-WHEN-DEPLOY$; nested exception is:
 java.net.MalformedURLException: no protocol: $CHANGE-WHEN-DEPLOY$}}
Is there some additional configuration that needs to be done to get around this or am I missing a step somewhere. Ran into this while going step by step with the Order booking tutorial and so decided to try with a separate project.
BPEL File Attached below:

<process name="SynchBPELProcess2" targetNamespace="http://xmlns.oracle.com/SynchBPELProcess2" xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/" xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20" xmlns:ns1="http://services.otn.com" xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:bpelx="http://schemas.oracle.com/bpel/extension" xmlns:client="http://xmlns.oracle.com/SynchBPELProcess2" xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc">
<partnerLinks>
<partnerLink name="client" partnerLinkType="client:SynchBPELProcess2" myRole="SynchBPELProcess2Provider"/>
<partnerLink name="CreditRatingService" partnerLinkType="ns1:CreditRatingService" partnerRole="CreditRatingServiceProvider"/>
</partnerLinks>
<variables>
<variable name="inputVariable" messageType="client:SynchBPELProcess2RequestMessage"/>
<variable name="outputVariable" messageType="client:SynchBPELProcess2ResponseMessage"/>
<variable name="invokeCR_process_InputVariable" messageType="ns1:CreditRatingServiceRequestMessage"/>
<variable name="invokeCR_process_OutputVariable" messageType="ns1:CreditRatingServiceResponseMessage"/>
</variables>
<sequence name="main">
<receive name="receiveInput" partnerLink="client" portType="client:SynchBPELProcess2" operation="process" variable="inputVariable" createInstance="yes"/>
<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload" query="/client:SynchBPELProcess2ProcessRequest/client:input"/>
<to variable="invokeCR_process_InputVariable" part="payload" query="/ns1:ssn"/>
</copy>
</assign>
<invoke name="invokeCR" partnerLink="CreditRatingService" portType="ns1:CreditRatingService" operation="process" inputVariable="invokeCR_process_InputVariable" outputVariable="invokeCR_process_OutputVariable"/>
<reply name="replyOutput" partnerLink="client" portType="client:SynchBPELProcess2" operation="process" variable="outputVariable"/>
<assign name="Assign_2">
<copy>
<from variable="invokeCR_process_OutputVariable" part="payload" query="/ns1:rating"/>
<to variable="outputVariable" part="payload" query="/client:SynchBPELProcess2ProcessResponse/client:result"/>
</copy>
</assign>
</sequence>
</process>
WSDL Attached below :
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="SynchBPELProcess2"
targetNamespace="http://xmlns.oracle.com/SynchBPELProcess2"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/SynchBPELProcess2"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
 
 <types>
 <schema attributeFormDefault="qualified"
 elementFormDefault="qualified"
 targetNamespace="http://xmlns.oracle.com/SynchBPELProcess2"
 xmlns="http://www.w3.org/2001/XMLSchema">
 <element name="SynchBPELProcess2ProcessRequest">
 <complexType>
 <sequence>
 <element name="input" type="string"/>
 </sequence>
 </complexType>
 </element>
 <element name="SynchBPELProcess2ProcessResponse">
 <complexType>
 <sequence>
 <element name="result" type="string"/>
 </sequence>
 </complexType>
 </element>
 </schema>
 </types>
 
 <message name="SynchBPELProcess2RequestMessage">
 <part name="payload" element="client:SynchBPELProcess2ProcessRequest"/>
 </message>
 <message name="SynchBPELProcess2ResponseMessage">
 <part name="payload" element="client:SynchBPELProcess2ProcessResponse"/>
 </message>
 
 
 <portType name="SynchBPELProcess2">
 <operation name="process">
 <input message="client:SynchBPELProcess2RequestMessage" />
 <output message="client:SynchBPELProcess2ResponseMessage"/>
 </operation>
 </portType>
 
 <plnk:partnerLinkType name="SynchBPELProcess2">
 <plnk:role name="SynchBPELProcess2Provider">
 <plnk:portType name="client:SynchBPELProcess2"/>
 </plnk:role>
 </plnk:partnerLinkType>
</definitions>

Lasts monday I downloaded a version (10.1.2 release, not preview/beta 3) which has the same filename and file size of the 10.1.2 GA release which is available right now.
I don't think the problem is in the PM, because i can run bpelc/obant to build my processes. however when i build them with the Eclipse plugin, it won't change the location of the wsdl (keep saying $CHANGE_WHEN_DEPLOY$).

Mapping error when trying to test SOAP message from RWB

Hi all,
I am very new to XI and I will like to get some advise for testing an asynchronous interface:
SOAP -> XI -> File
To test the interface:
I logged into RWB - Component Monitoring - Adapter Engine - Test Message:
URL: http://ootspdbs02:50100/XISOAPAdapter/MessageServlet?channel=:BS_RON_TEST:SOAP_Sender_Test
Service: BS_RON_TEST
Interface: MI_TestWebServiceServer_UpdatePatAdmissInfo
Interface Namespace: urn:test:ron:fapl:TestWebServiceServer
QOS: EO
Payload (I generated this from XMLSpy with the WSDL generated in Integration Directory):
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns0="urn:OOTSUpdatePatientAdmissionInfoWsd">
 <SOAP-ENV:Body>
 <m:MI_TestWebServiceServer_UpdatePatAdmissInfo xmlns:m="urn:test:ron:fapl:TestWebServiceServer">
 <ns0:Header>
 <ns0:encoding>String</ns0:encoding>
 <ns0:sendingApp>String</ns0:sendingApp>
 <ns0:sendingFac>String</ns0:sendingFac>
 <ns0:receivingApp>String</ns0:receivingApp>
 <ns0:receivingFac>String</ns0:receivingFac>
 <ns0:timeStamp>2001-12-17T09:30:47.0Z</ns0:timeStamp>
 <ns0:messageType>String</ns0:messageType>
 <ns0:messageId>String</ns0:messageId> <ns0:messageDesc>String</ns0:messageDesc>
 </ns0:Header>
 <ns0:patientID>String</ns0:patientID>
 <ns0:institutionID>String</ns0:institutionID>
 <ns0:caseNumber>String</ns0:caseNumber>
 <ns0:admissionDateTime>2001-12-17T09:30:47.0Z</ns0:admissionDateTime>
 <ns0:ward>String</ns0:ward>
 <ns0:bed>String</ns0:bed>
 <ns0:room>String</ns0:room>
 <ns0:movementCategory>String</ns0:movementCategory>
 <ns0:movementType>String</ns0:movementType>
 </m:MI_TestWebServiceServer_UpdatePatAdmissInfo>
 </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The error I got in SXMB_MONI is:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_TestWebServerService_UpdatePatA~</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_TestWebServerService_UpdatePatA: RuntimeException in Message-Mapping transformatio</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:MT_TestMsg/CaseNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:303) at .....
The message mapping consists of direct maps from each field in the source to the target (MT_TestMsg).
CaseNumber is the first field to be mapped.
In IR, I tested the interface and it works fine - no error in mapping.
I assume I cannot use the message generated in IR, because the SOAP envelope is required. (I tried anyway, and encountered the same error.)
Please advise how I can resolve this error.
Many thanks in advance.
Ron

Hi all,
I notice the tag and namespaces are changed when I generate the XML from the WSDL.
I am expecting something this format in IR:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:updatePatientAdmissionInfo xmlns:ns0="urn:OOTSUpdatePatientAdmissionInfoWsd">
 <ns0:Header>
 <ns0:encoding/>
 <ns0:sendingApp/>
 <ns0:sendingFac/>
 <ns0:receivingApp/>
 <ns0:receivingFac/>
 <ns0:timeStamp/>
 <ns0:messageType/>
 <ns0:messageId/>
 <ns0:messageDesc/>
 </ns0:Header>
 <ns0:patientID/>
 <ns0:institutionID/>
 <ns0:caseNumber/>
 <ns0:admissionDateTime/>
 <ns0:ward/>
 <ns0:bed/>
 <ns0:room/>
 <ns0:movementCategory/>
 <ns0:movementType/>
</ns0:updatePatientAdmissionInfo>
However, the message generated is :
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns0="urn:OOTSUpdatePatientAdmissionInfoWsd">
<SOAP-ENV:Body>
<m:MI_TestWebServiceServer_UpdatePatAdmissInfo xmlns:m="urn:test:ron:fapl:TestWebServiceServer" >
<ns0:Header>
<ns0:encoding>String</ns0:encoding>
<ns0:sendingApp>String</ns0:sendingApp>
<ns0:sendingFac>String</ns0:sendingFac>
<ns0:receivingApp>String</ns0:receivingApp>
<ns0:receivingFac>String</ns0:receivingFac>
<ns0:timeStamp>2001-12-17T09:30:47.0Z</ns0:timeStamp>
<ns0:messageType>String</ns0:messageType>
<ns0:messageId>String</ns0:messageId> <ns0:messageDesc>String</ns0:messageDesc>
</ns0:Header>
<ns0:patientID>String</ns0:patientID>
<ns0:institutionID>String</ns0:institutionID>
<ns0:caseNumber>String</ns0:caseNumber>
<ns0:admissionDateTime>2001-12-17T09:30:47.0Z</ns0:admissionDateTime>
<ns0:ward>String</ns0:ward>
<ns0:bed>String</ns0:bed>
<ns0:room>String</ns0:room>
<ns0:movementCategory>String</ns0:movementCategory>
<ns0:movementType>String</ns0:movementType>
</m:MI_TestWebServiceServer_UpdatePatAdmissInfo>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The namespace and the root tag is changed!
I think this might be causing the problem.
But how do I resolve it?

Lightroom LR4 - Map Module - Sticky mouse

Lightroom LR4 - Map Module - Sticky mouse Hi folks. When using the mouse to pan the map, the map sticks to the mouse for a while even when you release the button. This means you can pan teh map to a new location, release the mouse and the map continues to pan where you subsequently move the mouse to. Note: this does not happen with Google maps in the browser, so a problem with LR. Its' highly annoying to pan the map and then hold the mouse still for 2 or 3 seconds to avoid the map moving

Anyone?

LR4 Map sets tracklog times to UTC, so images won't load

Opening my tracklog in LR4 Map (on a PC) plots it with a -5 hr offset, evidently UTC time (I'm on Central Daylight), so the images I shot on the outing won't load to the map. The points on the map in LR show the UTC time, whereas the same track opened in Google Maps shows the correct, local times. On October 3, b_gossweiler looked at ImageDesign704's tracklog and responded "I've removed the timezone inidications on the trackpoints and loaded the tracklog successfully into LR." Can someone explain how to get into a .gpx file and remove those timezone indicationst? My tracklog won't open in Windows.

rljeanne wrote:
The 07:22 to 09:16 recorded by the device is the correct local CDT time. Why should that be wrong?
Because GPX timestamps are supposed to be in UTC, not local time. (see here)
Neither the GPS device nor its software has any way to reset the time to UTC.
You might want to get in touch with the manufacturer of the device, and ask them how to record UTC timestamps in a GPX file.
Meanwhile, Google Maps plots the track just fine, with the correct local time, so it seems to me that the problem lies in what Lightroom does with the file, i.e. it assumes times to be in UTC and makes the adjustment by subtracting 5 hr from the input data.
I'm not aware of a way to map a track file on Google Maps. But when I pull your track into Google Earth (I don't know how to map a track in Google Maps), Google Earth shows 07:00-09:16 as UTC, and adjusts accordingly to my local time zone if desired so.
Is there any way to reset that in LR?
You can use the tracklog time offset function in LR to adjust for the wrongly recorded timestamps.
Beat

Nokia maps.changing red circle to an arrow?

Hi there,
Is there a way to change the red circle ( the dot) to an arrow? I know it changes when you're navigating to a place, but can I change it when I'm just moving around?

Unfortunately that is not possible.
The new nokia maps 3.0 adds a feature that may be useful to you. You can set it so that the map points in the direction of travel, instead of always pointing north.
Maps 3.0 is still a beta and not compatible with many models yet.
www.nokia.com/betalabs/maps
Message Edited by psychomania on 17-Dec-2008 08:32 AM

TS2771 on i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

On i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

The user guide says:
Movies viewed in Videos and YouTube appear only in landscape orientation. Street views in Maps
also appear only in landscape orientation.
Do you have the scree orientation lock turned on? If on there is a circular arrow icon with a padlock inside next to the battery charge icon in the upper right.

ANY SY-INDEX REFLECT CHANGES WHEN CONTROL BREAK STATEMENT PROCESS

Dear Guru's,
                 I have a requirement where i have to move the values to variable when control break (AT END OF) process. So i want to move the values according to the end of Vendor so for that i want to know is there any sy-index available which reflects changes when Control break (AT end of) process.
LIKE Sy-subrc = 0 when select statement fetches record or sy-tabix is like counter for loop.
Hope to get reply soon.
Regards,
Himanshu Rangappa

Hi,
There is no system Fields for it.
But your requirement can be done with 'AT NEW' and 'AT END' statement.
Refer this sample example,
loop at otab.
    at new module.
      move otab-module to otab2-module.
    ENDAT.
      at END OF effort.
      sum.               "Do your calculations here
      move otab-count to otab2-count.
      append otab2.
    endat.
endloop.

TS3899 When sending email from the Mail App or through other Apps, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design.

When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design, especially since I had already checked the From: address.
iPad 4 running iOS 8.1.3

3rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
LJ
http://www.facebook.com/The.Cowboy.Party

The order of my ical 'all day' events changes when i go into print mode?

The order of my ical 'all day' events changes when i go into print mode. What can i do to keep the order of events i so painstakingly created?

View only works in one direction,will not change when I turn the phone

view only works in one direction,will not change when I turn the phone

Is the rotate lock on?
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

Color space change when using photoshop elements plug in

When I select photo and edit with photoshop elements, Aperture makes a copy of the file as expected, but I can see the image color/hue etc. has changed, why? Is there some setting I am missing? The color of the image shouldn't change, should it? Just doesn't make sense!

Where do you see the color change of the copy?
In the thumbnail or preview before it is send to the external edtor?
When the image is opened in the external editor?
Or after it is send back from the editor?
I do not see any color changes when I use PS CS5; it may help to see a screenshot.

XSLT Mapping changes Required

Hello Experts,
I got one change requirment, where the name filed in the idoc contains special character (like semi colon) in between the name, I want to put double quotation for that special character at XSLT mapping.
Eg:
Input Name: Ravi ; Kumar
Out put would be: Ravi ";" Kumar
Please help me out with the required mapping changes in XSLT.
Thanks in Advace.
Edited by: ItsUrRock on Mar 23, 2011 11:55 AM

Hi,
use xpath function translate() and escape the semicolon and the quotes.
<output><xsl:value-of select="translate(//Name,%3B,%25%3B%25)"/></output>
If that escapes do not work google for escape sequences.
Regards,
Udo

LR4 Map Changes when Geotagging

Similar Messages

Maybe you are looking for