LR4 Not Holding Adjustments on Export

I'm not sure if this has been reported yet? I have noticed that adjustments to images in LR4 are not being retained on Export.
Specifically, an image appearing to be correctly exposed after adjustments and while still in Lightroom 4, appears brighter and lacking in shadow adjustments on Export and uploading to facebook. My guess is that shadow adjustments have been lost on Export?
Does anyone know if this is a known issue?
Thanks for any feedback.
Stephen Power

I just tried it again with another image and it seemed to Export all of the adjustments. Previously, I needed to add about 25 points more blacks to get the same result on in Facebook as I had in Lightroom 4. This time, it appears to be as it was prior to export. I'm wondering if there are certain adjustments (or certain amounts of adjustments) that are not "holding"?
Thanks again for your feedback.
Stephen

Similar Messages

How to get existing library imported to new itunes install, old library was not backed up or exported

How to get existing library imported to new itunes install, old library was not backed up or exported. This occured due to Win 7 user profile was corrupt.

I know that in Mac OS X one can pick which library to use by holding down the option key while starting iTunes. What's the Windows equivalent?
Press the Shift key.
WIll the fact that the music is now on another physical drive make a difference
No.
I know the previous install is at least 7.0, but I have no idea about which point release.
Try checking the content of the iTunes Music Library.xml file.
Finally, what's the expected behaviour (or required procedure) with respect to reauthorization of this computer to use the same ITMS-purchased files?
You will be asked to reauthorize the computer.
(28446)

Why is my location city changed by Firefox to a town I don't live in? I put in my zip code in the weather info and it will not hold it no matter what I do. This is very frustrating and never a problem in the past. IE doesn't have the problem. Help?

Why is my location city changed by Firefox to a town I don't live in? I put in my zip code in the weather info and it will not hold it no matter what I do. This is very frustrating and never a problem in the past. IE doesn't have the problem. Can anyone help?

1) Is it a video clip? Something you recognize? To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
2) What are your sequence settings? Right-click your sequence and choose "Item Properties" to verify.

LR4 Not Including Sidecar Files in Backup Destination

I've noticed that when I import files (NEF's) into LR4 and back them up to a second location (external hard drive) the sidecar files are included in the primary destination folder but not in the backup folder. I checked my LR3 backup folders and the same thing is happening.
I'm sure that there is an explanation for this, but I'll be @#$%^& if I know what it is. Does someone have an answer?

Thanks.
I usually import "raws" directly into Lightroom from a CF card (out of a Nikon camera), so I'm not sure what program could be generating sidecar files. I've checked the cameras and they don't seem to be generating any   I also specify "no adjustments" in the import dialog. The side car files are always present in the primary import location. .
This isn't a critical issue, but I sure am curious to know why it is happening.
Date: Mon, 20 Feb 2012 06:52:58 -0700
From: [email protected]
To: [email protected]
Subject: LR4 Not Including Sidecar Files in Backup Destination
    Re: LR4 Not Including Sidecar Files in Backup Destination
    created by ssprengel in Photoshop Lightroom 4 - View the full discussion
XMP Sidecar files may exist at the time of import, either because the files were edited in Bridge/ACR or Lightroom, itself, or another XMP-creating program such as GeoSetter that can create an XMP with GPS tags in it.
    Whether those XMP sidecar files should be copied to a secondary location on import remains an open question.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4217723#4217723
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4217723#4217723. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom 4 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

IMovie09 Not Holding Transitions

I am using iMovie09 and I notice that the particular movie I am working on does not hold its transitions. After I upload to YouTube, some (not all) transitions are gone and when I export to my desktop the transitions disappear. I closed out iMovie, opened it back up - transitions gone. Why is this happening and how can I repair it?
If it even matters, I also have iMovie HD6 on my system but I have not even tried to shift movies betweeen the two programs. I am working exclusively in iMovie09 until I learn iMovieHD6.
This problem is so frustrating. Last night I uploaded a movie to YouTube and when I played it back, I noticed some of the transitions were missing. When I looked back in iMovie they were missing there, too, so I am presently trying to put them back in but they keep disappearing.

The preference files for various versions of iMovie are as follows:
⇒ iMovie 3 and iMovie 4 - "com.apple.iMovie3.plist"
⇒ iMovie HD 6 - "com.apple.iMovie.plist" (I think iMovie HD [version 5] also used this file)
⇒ iMovie '08 - "com.apple.iMovie7.plist"
⇒ iMovie '09 - "com.apple.iMovie8.plist"
⇒ iMovie '11 - "com.apple.iMovieApp.plist"
As you will note, it's all very confusing! This is mainly due to version numbers not matching the release name, or no number being allocated. For example, the iMovie '09 file is labelled with iMovie8 because the version number is 8 (the last release being 8.0.6). However, for iMovie '11 it's simply iMovieApp (with the latest version being 9.0.4).
It's difficult to see the logic with the naming protocols, but bear in mind, no harm will come if you delete the wrong file as iMovie (whatever version) will rebuild the .plist file with the default settings when next opened. You can then change settings if desired in the iMovie menu item "iMovie>Preferences".
John
Message was edited by: John Cogdell - added line for iMovie '08

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Why is my calendar not holding the correct color. I have reset the color of a particular calendar posting and within second the color reverts to purple.

Why is my calendar not holding the set color. I have reset the color of a particular calendar and within seconds it reverts back to purple. I am using ICloud on a calander linked to my IPhone and IPad.

set them at icloud.com on a computer. its a work around. Peace, Clyde

Not been able to export data from FDQM to target system

Hi,
Am not been able to export data from FDQM to my target system which is Hyperion Enterprise 6.4
I have imported, Validated the mapping but as soon as i click on export after creation of the export file the system throws an error as "*Error: Arguments are of the wrong type, are out of acceptable range, or are in conflict with one* *another*". Also am pasting the error log down below
** Begin Enterprise Adapter Runtime Error Log Entry [2009-08-20-16:10:27] **
ERROR:
Code.............. 10230
Description....... Data Load Errors.
Enterprise API Return Code: ALREADY_LOCKED_RO-.
Procedure......... clsHPDataManipulation.fDBLoad
Component......... upsHE6xG4A
Version........... 100
Thread............ 6028
IDENTIFICATION:
User.............. administrator
Computer Name..... HYPERION
ENTERPRISE CONNECTION:
App Name.......... GCIP_S
Connect Status.... Connection Open
GLOBALS:
Zero-For-No....... True
INI File Path..... C:\WINDOWS\HypEnt.ini
NameCat.txt Path.. C:\Hyperion\FDM\GCIP\Outbox\Logs\NameCat.txt
NameCat Entity....
NameCat Category..
NameCat Exists.... False
Any suggestions any one, what should i do

Hello,
Is it possible that the entity that you are loading to in Enterprise is locked? It appears that it may be per the below error. You can only load to unlocked intersections, so I would start by checking the catagory and entity combination for being locked.
Regards
JF

Battery said it's charging but laptop is not holding any charge. At 0%

Having a battery issue and laptop not holding charge. My laptop was working fine yesterday and this is the first time I am having this problem. When I plug in the charger the light turns orange as to indicate it's charging but this is not the case. Also the orange light flickers to white sometimes to note full charge but I'm at 0%. I can only run the laptop for a minute or two before it dies. I checked the icon on the bottom right and it shows that it is plugged in and charging but stays at 0% and dies in a few minutes.
I've tried searching and tried everything.I can't remove battery easily as it is an ultrabook. I tried waiting for laptop to cool, shutting down manually, disconnect charger and plug back in, trying different wall socket. Can't seem to find a solution please help!

Hi nomanhp,
First Try these Steps -
1) Go to Device manager (Control Panel) and check with battery (ACPI and Adapter) that weather its installed or uninstalled.. If uninstalled then reinstall it.. If you find the battery installed in the control panel, try uninstalling it and reinstall.. See if u find any change..
2) If no Change found. Along with Following the above steps, shut down and restart your laptop for every uninstall..
I mean, at device manager, uninstall the battery, turn off the laptop and start the laptop again (you might also select "restart with last good configuration" by pressing F8 while restart)... While reinstalling, the battery gets automatically reinstalled..
You might also try clicking "scan for hardware changes" at device manager..
3) If the problem Still persists, then ur battery is probably dead and is malfunctioning.. U would need a new Hp Battery..
If none of these above resolve ur problem, then there should be a problem with ur power board and u would need the help of expert to fix it.
Mark this Reply as "Accept as Solution" if it solves your problem. Click "thumb up" just to say Thanks..
Good Luck!!
- Raj

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

My Apple iPad 3 is less than 6 months old - purchased in March of 2012. I believe it already needs a new battery. It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in. Please advise - it is very annoying.n.

My Apple iPad 3 is less than 6 months old - purchased in March of 2012. I believe it already needs a new battery. It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in. Please advise - it is very annoying.

Take it to Apple Store. You are covered under your 1 year warranty.

Battery shows charging but stuck on 28% and does not hold charge

i am using HP DV6-6107tx, i got a new extended battery from anker which seemed to be running fine untill it discharged while i was playing watch dogs.
now my laptop wouldn't power on just on the battery, everything works fine if it is on charging, but the battery does not hold charge and my system powers off immediately on removing AC adapter. the battery shows "28% Charging" but does not increase or decrease the percentage even after hours of charging both while system is on and off.
i checked the battery in battery test from HP Support Assistant and it says that the battery status is ok, now i have tried the below methods with no luck :
power off and press power button methods.
uninstall and reinstall battery from device manager methods.
battery check from HP Assistant.
updating Bios to F.1b method.
updating the HP Support Assistant.
and all the other methods i could think of or read on HP's site.
can anyone guide me as to what is the issue here ? i don't have another machine to test my battery on, the charging lights are fine except that the light does not change color which it did on full charging the battery. i did try on 2 different adapters.
now if it were a motherboard or IC issue, would it not have said 'not charging' in windows ? in my case it says charging.
any help would be greatly appreciated.

Hello, M_Bilal
Welcome to the HP Forums.
That you for provided such a detailed post with what you've already completed, for the issue with your battery. I will try to guide you further.
I would like to provide you further documents for troubleshooting, but you've essentially completed what I have for this issue. The only step left, would be to test the battery.
You can do this with another battery, or in another notebook. I know you mention another machine, but if you know someone who does or someone who has a compatible battery. This would test that. You could even see if a local computer shop could test it.
The reason for this, is if the battery is the problem, it's much easier and more affordable replacement. Also, you mention it being new, might have warranty.
The other possible cause to the issue you've touched on, that would be the system board. Testing the above, would just confirm if this is the problem or not. From there you could decide on what you'd like to do.
I know, there really aren't many suggestions here, but I hope this can provide you with the next step.
Let me know how things go, with the route you choose to troubleshoot.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

I have had my iPhone about 1 1/2 years...with no problems. About 2 days ago my battery drained within an hour, I plugged it in to charge and it heated up so hot the temperature warning popped up on the screen. The phone will not hold a charge now.

I have had my iPhone 4 for about 1 1/2 years, with no problems. A couple days ago the battery drained in about an hour, I plugged it in to charge and it was not charging. After a few hours a message popped up on the screen about the temperature being too hot...the phone was very hot when I picked it up. The battery will not hold a charge and it heats up every time I plug it in. Suggestions???

Make an appointment at the genius bar. An out of warranty replacement is $149. It sounds like it may have gotten wet.

Why are most of my keywords not included when I export images?

Why are most of my keywords not included when I export images?
Since starting with Lightroom 1, I've entered keywords into either of the two fields between "keyword tags" and "keyword suggestions" in the keywording panel. I was unaware that some keywords are more equal than others, or that Lightroom offered (or has added?) hierarchy support.
I recently stumbled into the news (to me) that Lightroom tags can be organized into a hierarchy, so I exported my keywords to a text file to examine. I hadn't unwittingly created any hierarchies, but an astounding fraction of the keywords were within square brackets. Sure enough, if I export an image, keywords within square brackets are omitted from the output (jpeg) file. How nice. Since I began with Lightroom 1, I've added nearly 1600 keywords.. Too bad most of them are coded wrong... so as not to accompany output that I create.
1.     What was I supposed to do, as a photographer beginning to use Lightroom, to enter keywords simply but reliably: what I type is what I get? I'd expected that's what the "just type here" interface would provide.
I especially dislike obtaining erratic results: most keywords are in square brackets, but a few are not. Of course, when I use a simplified interface, I should expect not to have access to some of the options or features. However, I shouldn't inadvertently trigger undocumented behavior.
2.     Does the Adobe reference help system say how to enter keywords simply and reliably, in its documentation of the keywording panel? I don't find my answer under the Keywords topic, within Home / Using Photoshop Lightroom 3 / Organizing photos in the catalog.
(I NOW realize that the instructions for the "Create/Edit keyword tags" dialog mention exporting. However, that's not the method I was using.)
Dick Rawson

I'm afraid that I distracted you with my background mention of hierarcharial keywords; I'm not asking about them.
I've entered keywords for several years of using Lightroom. Suddenly, this week, I find that most (yet not all) of them have the attribute of "don't include the keyword in an exported file's metadata." I never intended to ask for that; I thought all keywords will stay with the file and its offspring, and that's what I wanted.
So I'm asking:
1.     What did I do "wrong" to induce Lightroom to give the keywords that attribute? I never intended to ask it to.
2.     Where does Adobe document how to enter keywords reliably so that they stay with the file on output? I can't find that Adobe does.
> Can you be more clear about keywords in square brackets? I know when you export the keywords as a list you can get a normalized data file that uses punctuation and tabs as delimiters...
I did export the keywords into such a list: most keywords in the plain-text list have square brackets surrounding them, indicating keywords that will be omitted from metadata of any image that Lightroom exports.
My concern is not that the brackets are there. They encode the attribute of "don't include the keyword in an exported file's metadata," and recognizing that attribute concerns me.
> ...but I've never seen keywords in image files or in the interface rendered so.
I haven't, either.
Dick Rawson

Will all my music transfer from the mac to my macbook air? I don't want it to because there is too much and the air will not hold it.

will all my music transfer from the mac to my macbook air? I don't want it to because there is too much and the air will not hold it.

Welcome to Apple Support Communities
First, when you are going to turn off or restart your Mac, you will see a box called "Reopen windows when logging back in" in the shutdown or restart window. Untick this box and see if the App Store opens automatically in the next startup.
If it starts, open System Preferences > Users and Groups > Login Items, and see if the App Store shows up. If so, remove it from this list

LR4 Not Holding Adjustments on Export

Similar Messages

Maybe you are looking for