LR4 problem

I have loaded and used for many months LR4 on my desk top HP 2509 and my lap top Dell Insperion, but now my desk top will not load my LR4 program. My screen say " The application was unable to start correctly (0xc000007b) Check OK to close the application". I did and nothing happens. My lap top is off therefore no conflict. How do I obtain use of my LR4 on my desk top? Need you help on this issue. Pleaase contact me at [email protected] or 818 802 4684 ........Thanks you

Based on user suggestions and feedback we have updated our documentation on this issue with some new solutions.
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
We are locking this thread. If you have more questions or still are seeing the error, please continue the discussion on this thread: http://forums.adobe.com/message/4836005

Similar Messages

Is this a PSE9 problem or a LR4 problem?

When I export an image from LR4 to Bridge for final retouching in PSE9 (as a 16-bit PSD file), the file doesn't show a thumbnail image on Bridge, only static. I can call it up, do editing and change it to 8-bit, but when I try to save it, I get this message: "Could not save as (filename) because the file is already in use or was left open." Is this a LR4 problem or a PSE9 problem or something else? I can save the image under a new file name, but I want to make sure there's not some underlying problem that's going to start corrupting files.

Why are you putting bridge into the equation? Wouldn't it be simpler just to set PSE as your external editor?

LR4 problem or PS problem?

When I export an image from LR4 to Bridge for final retouching in PSE9 (as a 16-bit PSD file), the file doesn't show a thumbnail image on Bridge, only static. I can call it up, do editing and change it to 8-bit, but when I try to save it, I get this message: "Could not save as (filename) because the file is already in use or was left open." Is this a LR4 problem or a PSE9 problem or something else? I can save the image under a new file name, but I want to make sure there's not some underlying problem that's going to start corrupting files.

glit wrote:
I have the latest version of the DTM installed and get the same error.
Please also check that the version of DTM you are using is compatible with your Desktop PIM version:
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
If so, then see this KB:
KB16280 "Error backing up database" message appears when backing up BlackBerry smartphone using BlackBerry Desktop Manager
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

LR4 Problem: The file could not be edited because Adobe Photoshop CS6 could not be launched.

Is there a fix for this? When I try to edit an image in Photoshop from Lightroom 4 (CTRL+E), Photoshop CS6 launches immediately but with no image. In Lightroom 4, after about two minutes, the message box appears saying "The file could not be edited because Adobe Photoshop CS6 could not be launched." When I click OK, the image promptly opens in Photoshop CS6 like normal. This wan an itermittent issue for me after the LR4.1 release. I was hoping that LR4.2 would help, but now I get the error every time.
System
Lightroom 4.2 x64
Photoshop CS6 v13.0.1 x64
Bridge 5.0.1.23 x64
Windows 7 Pro x64
AMD Six Core / 3.9 Ghz
16 GB Memory
NVidia Quadro 1 Gb Video
Scratch space on three drives

This may be a cooincidence, I starting having problems after I started using a Nikon D800, which has 36MP files. LR4 released at the same time as the D800. LR4 shows signs of struggling with the larger files, which are typically 280MB TIFFs for the D800, like freezing for several seconds when using an adjustment brush or going into a spasm with the crop tool. Because Photoshop does not have similar large file issues, I'm doing more basic work in Photoshop, like cropping, dodge and burn, exposure adjustment, etc.
Because Photoshop otherwise runs fine, and appears to read all the prefernes properly mid-issue, to get a better idea of what's going on, I turned on Process Monitor from Technet. For what it's worth, LR4 appears to touch the Photoshop preferences before it launches Photoshop. LR4 must have a memory leak in that corrupts the Photoshop preferences file in a way that makes no difference to Photoshop.
My weekend project is to try Capture One to see if I can spend more time on photography and less troubleshooting Adobe problems. As it stands, LR4 is not usable for me.

LR4 Problem Saving Metadata

Ever since I upgraded to LR4 I have noticed a problem with metadata. I have created a Smart Collection with the rule "Metadata status is Has Been Changed" to show me all of the images that I have updated metadata but not written the changes to disk. I am seeing the number of images in this collection gradually increase ... but not because I am working on images!
If I go to the collection, do a "Select All" and then do a "Save Metadata to Files", sure enough the disk goes crazy and the images are removed from the collection. BUT ... if I just sit back and watch ... after a few seconds of inactivity the smart collection gradually fills up again ... with the same Images I just saved!!!
Like I mentioned, it seems like this list is getting gradually longer and longer. A few months ago I had about 20 images that were behaving like this, but now I have over 250!
Anyone seeing the same thing? Or have any suggestions as to the cause?
I'm running LR4.1 on an iMac running Mac OS X Lion (10.7.4).

Lr4.3/Win7 pro 64bit-file format dng without write to xmp automatically
This returning group of 'metadata changed' issue has repeated itself in past version and currently.
I select the returnees and use the menu command 'Update dng preview and save metadata' That appears to do the trick for no reappearance occurs.
Since I'm 'catching up' on past images that were not processed I assumed this issue could be connected to 'building the previews'.
Its an annoyance if there are many images that had a metadata change resulting from a simple thing such as keyword edit or move. I learned to do 'save metadata' often rather than watch most of a large group return into view.
Just repeating the save didn't always work but the 'update previews and save' does complete the action.
Rose

LR4 Problems after upgrading CS5 to CS6

Hello,
I encountered problems with LR4.0 after I upgraded my Photoshop CS5 to CS6.
LR4.0 hangs (crashes) whenever I switch to the Develop module (from any module). All other modules work just fine.
I worked with LR4.0 a few months now, with no problems (running W7 Home Premium 64-bits SP1)
- can this be Adobe Camera Raw related?
- are LR4 and CS6 using the same ACR (how can I check this)?
- can I (completely!) remove and re-install ACR and how?
- can this be Develop preset related (presets did not change, however)?
- is there a specific order in with to (re)install LR4 and CS6
- is there a way to completely(!) remove CS6 and LR4 with no traces, and start from scratch?
I will be switching (upgrading) computers in a few days from now, so I want to fix the issue until this switch and I want to be sure I do not encounter the same problem on my new machine.
Any hints and tips will be appreciated!
Cheers!
Dirk

I really wish I could be more help to you. I am running Lightroom 4 on both a 64 bit and a 32 bit system. And I'm having no problems with either one (using 4.1 RC 2). You could try uninstalling both programs and start over. Install Photoshop first, then Lightroom will see it and use it for external editing. Other than that, hopefully someone else will have some good ideas.
Just one other thought, if you haven't installed 4.1 RC2, that is the first thing I would do before anything more drastic .

LR4 problems loading images

I recently installed LR4 and it now loads images very slowly when first loading images with further attempts at loading images, it runs contnuously without ever loading the requested image. Any solutions? My OS is Windows7.

Having had a spare moment to look at the problem again this was a case of seeing what you want to see.
HelpSetMaker was actually dropping tags src="pics\folder\folder/image.png"

Downloading and Installing LR4 problems

I had to upgrade my system software and no am unable to open the LR 4 folder to install. Any recommendations?
I tried to find my recent order in my profile and it doesn't show it exists...

If you have your serial number you can download the Lightroom room trial from https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=D TEML. Did you also try the steps listed at http://forums.adobe.com/thread/1006208?tstart=0 to locate your software?

Meta Data are saved but after some seconds lightroom displays again that arent up to date...

Hello,
i've started to use keywords. Also i export all files back to the XMP-Format. On some files the changes are not permanent/lasting.
My smart-collection tells me 5 seconds later that the meta-data should be saved again..
Do you have any suggestions?
Thank you

Yes, there are lots of issues like this. Mostly I find that closing the catalog and opening it will solve the problem, or you can read the metadata from the files after saving them. It seems to be a problem that Adobe cannot or will not fix.
Re: How to See what Metadata is in Conflict
Re: LR4 Problem Saving Metadata
and others that I think you can find yourself

Problem with serial number Lr2 to Lr4 upgrading

Welcome. I have a problem in LR 4 I use Lr2 upgrade to L4. From time to time my PC lost the serial number of the program. I have to enter the new LR2 and LR4 number losing all presets. After reinstalling Windows 7 is still the problem exists. Is it possible to send me a new LR4 for installations already without error?

Your presets should not be lost even if you have to re-license LR4 with 2 serial numbers. Something else must be resetting things on your computer. Are you using System Restore?
Make a backup of your critical LR files elsewhere on your computer and if they are reset or lost, restore from that backup.
Your serial number Is stored in this file:
C:\ProgramData\Adobe\Lightroom\Lightroom 4.0 Registration.lrreg
Your presets are stored, here or with your catalog:
C:\Users\[user name]\AppData\Roaming\Adobe\Lightroom\[preset or template folder]\[preset or template filename.lrtemplate]
Your preferences are stored here:
C:\Users\[user name]\AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 4 Preferences.agprefs
You can download LR 4.4.1 from here:
http://www.adobe.com/support/downloads/product.jsp?product=113 <http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows> &platform=Windows

I have had LR4 since last August.Have just decided to start using it.I have an IMAC 10.9.3 version. Am trying to learn with "Classroom in a Book. Ton of problems.Adobe will not help because it is to old and they no longer support. Can anyone tell where I

Did anyone see the post I made about LR 4?Just in case I will post again. I have LR4 I bought last August and just now I am trying to learn this >I have "Classroom in a Book" for LR4 lots of problems . I have a IMAC version 10.9.3. I tried different Adobe sites. They will not give me the Time of day because they say they no longer support this program. Can anyone here tell me where I can get support for this LR$ that Adobe no longer recognizes. Thank you My name is Jerry S. MY e-mail is [email protected] and phone number is 563-344-7910.

Okay I will try. First I have lost pictures in catalogs and could not find again.I have tried reinstalling LR4 and when I do and reopen LR4 the same catalog appears in the panel and filmstrip and I have no idea how to get rid of that catalog and start over at square one like it was the frist time it was opened. That would be a big help and I think I start over and avoid the same problems.

LR4 Flash Web Gallery Color Problems

The color space on the selected images appears to be changing when I use the Lightroom flash gallery in the web module of LR4.1. This stays the same when the gallery is uploaded. In previous version of LR I have seen color changes in the web module but they have been corrected (and correct) when the gallery is uploaded to the 'net.
I have read that this was (previously) a problem with the flash gallery specifically becuase it was not colour magaded, but I understood that this had been corrected for LR4. As far as my use is concerned it's actually more problematic now than it has been previously.
Can anyone offer a solution?
Thanks for any suggestions.
Stephen

I have windows 7 and monitor with a calibrated profile. LR4 flash gallery's displayed are color correct, but the same gallery displayed on a uncalibrated (wide gamut) monitor shows saturated colors. Check your color management in windows 7 if a profile is associated with your monitor. The best color managed web browser for windows is safari for windows next is firefox see also this website http://www.gballard.net/psd/go_live_page_profile/embeddedJPEGprofiles.html

LR4 Flickr plug-in 'could not contact Flickr web service' - has nobody solved this problem?

G'day All,
I know i'm not alone. LR4 is now telling me it cannot update (Re-Publish) images successfully uploaded only an hour before via the native Lightroom publishing service.
Here's the plug-in diagnostic:
Plug-in error log for plug-in at: C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.1\Flickr.lrplugin
**** Error 1
This plug-in’s post-processing task did not finish successfully.
Could not contact the Flickr web service. Please check your Internet connection.
There are a couple of other discussions of the same issue on this forum, dating back to 2010, and, as far as I can see, no resolution to date.
Am I wrong?
I know there's the other guy's plugin, but everyone with the same problem reports no change if they switch to that. I'm signed in without problems to Flickr via both IE and FF, and the Flickr Uploadr connects just fine. I'm at work, and am hardly in a position to be tweaking modem packet-handling, (not that I'd be inclined to anyway!)
Flickr is hardly obscure - it's the biggest, most successful photo-sharing service on the web. Is there a solution I haven't spotted? If not, surely a solution is overdue?
regards,
Bill

G'day Rob,
I've installed the Friedl plugin, but the problem is I have 50 images I'm looking to republish - specifically only to update the captions - whereas the new plugin will naturally want me to republish (all over again) the entire set of photos.
I've just tried republishing 3 of them all over again with full captions via the Friedl plugin and it worked fine - looks like I'll have to delete the original lot if I want to have fully-captioned versions and use the Freidl plug-in from now on!
Think I'll just fiddle with the captions of the originals online, and use the Friedl plug-in for future uploads.
Dear Adobe - could the bug in the original, native publishing service be fixed, please? As Alan states above, we currently potentially have people wandering around playing with systems registeries and modem packet-handling and firewalls because the software is making incorrect reports of connection status, when, in fact, the Adobe Flickr plug-in simply can't handle multiple-paragraphs in captions!
And if you've found this, Dear Reader, because the LR4 (or LRx) Flickr publishing service is telling you you can't connect to Flickr - don't tweak anything! First check if you have entered captions on your photos that contain paragraphs - i.e. carriage or hard-returns so that they appear broken into readable chunks just as this post does - because that's probably the problem. Simplify - to one line - a caption on the next photo or two due to be uploaded to check, and, if that works, and you want to have full captions, try the Friedl plugin!
Thanks to all for your help.
Bill

Problems installing LR4.1 RC2

I have tried several times to install LR4.1 rc2 and it fails because it cannot find the .msi file....never had this problem before and a search on the computer does not show it as well....I simply download for Windows and extract. thoughts?

Had to work with technicians to figure the problem but have it fixed. Apparently the LR4.1 rc was corrupted so when I tried to delete it with the normal windows uninstall process, it gave an error message that it was on a network resource that was not available...wierd as I was not on the network..anyway, we went with a 3rd party uninstaller that was successful....and then ran the installer for the rc2...that appeared to work. Be interested to see if it crashes as I have a black bear photo opp the next several days...

Importing problems with LR4

I import from memory card. After a few seconds of importing the pictures, it goes to a black screen that says "please select a source" Using LR4 on a PC running vista. I have tried copying the picture to a folder on my harddrive but when I ask LR to import it says there is nothing in that folder. I have checked the pictures are there.
MichaelAnn Robinson

Codec packs, even the "better" ones, do not typically provide codecs that Premiere and Encore can use.
The "problem" file is a flash format (whether it is an mp4 container or not).
"Consumer" type DVD authoring/burning applications, and even more so, all in one apps like windows movie maker etc, may be more "powerful" when you are trying to take a large range of formats and create a DVD with relatively few options. This is not Encore's strength.
Encore will reject almost anything that has flaws it isn't able to handle, but more importantly (once you get to this step), it will treat as noncompliant (and re-transcode) anything that is not DVD compliant.
My guess is that you need to get the flash into something that will work better for transcoding to DVD compliant.
I would first try to bring one of the problem files into Adobe Media Encore, and see if you can export an MPEG2-DVD file.
Not that, while there are some less known DVD resolutions, I assume you are going to end up with 720x576 PAL. I wonder what the quality will look like....
If you are just looking to get the files onto a DVD to play on a DVD player, just stick with DVDStyler.

LR4 problem

Similar Messages

Maybe you are looking for