LR4 The wrong file information in the preview loupe

I have not seen this mentioned in the forums but I keep getting a bug where the file information displayed in the preview window gets 'stuck'. The information sometimes hangs with that of a previous image. Ie it doesn't relate to the current image but a previous one I have viewed.
Any one else found this? It's a bit of an anoying bug!

Faces has identified the wrong person.
Actually iPhoto does not identify people - iPhoto suggests and you confirm or reject so you confirmed incorrectly (which happens to all of us)
How do I re-assign to the correct person?
double click on the photo to open it and click on "name" and type the correct name for the person
Mary and Jane are in a group picture and have been identified by iPhoto, not me.
In Mary's Faces album, Jane's picture is the thumbnail. In a way, the group picture is correct. I would rather have all of Mary's thumbnails show Mary.
The choice offered by iPhoto is accept or reject. Going into Edit for the pictures does not give the option to identify faces.
If you reject the person will remain un-named- and in the confirm names mode (starting with version 8.0.2) if you right click (control click) on the photo you can accept, reject or name
I am reluctant to reject because the group picture may not show up again.
You can always make a smart album with name is unnamed and find all photos with unnamed people (started in version 8.0.2)
LN

Similar Messages

All pdf say they are the wrong file type or are damaged. will not allow to open in preview and no pdf's can be printed as they are "empty"

All PDF's I try to save will save but nobody can open them. Message is it cannot be opened by reader it is the wrong file type or has been damaged.
Tried to open with Preview and the message says it is empty, also empty if you try to sea as a PDF in the print option!

Hi Michelle in MD,
Thank you for posting on the Adobe Forums, as botht applications cannot open the PDF file, i would suggest you to download it again and try.
Thanks,
Vikrantt Singh

Can I slim down the size of the Aperture Library by moving the Preview files elsewhere?

Hi all,
I have an Aperture library of almost 20,000 photos, dating back to around 2007. Almost all the master images are stored on an external drive (backed up of course), with only my recent and 'in progress' masters being stored in the library itself. Previously I have had my library split up into one library for each year, with the older years libraries being stored on the external drive where the masters are, in order to keep the size of my 'current' library down. So my current library, stored on my internal SSD, contained only photos from this year and last year, and only a few of the masters for these images. Confusing? Sorry!
Now, I recently decided to consolidate the libraries into one huge library, because it was annoying to have to switch between libraries to find older photos when I wanted them. I did this, leaving all but the recent masters on the external drives (referenced). I thought that the size of the main library would remain reasonably sized, since there were no extra masters being moved into it. However, the library has grown massively - up to over 70GB, which is huge when you consider it's on a 128GB SSD which is also my startup drive.
I'm pretty certain the reason for the huge size increase is that the Previews for all the older images are stored in the Library file, rather than anywhere else. This makes sense - they are previews, they're supposed to be able to be viewed with the external drives disconnected. So my question is this. Am I able to change the location of the preview files to be on my OTHER internal hard drive (non-SSD, much larger), so that they're still available without the external drives, but are not cluttering up my startup drive. And, if not, what should I do!?
Thanks a lot

Glad it worked, but permit, if you will, some observations:
-- Bloated Previews are a known Aperture bug, which came and went within a few updates in Aperture 3. Getting them back to the proper size is simply a elegant step to take.
-- A Preview set to your largest screen size and a quality of 6-8 should be all but indistinguishable from the Master at 72-100 dpi screen image. (Not print resolution.) I REALLY doubt you are going to loose any quality.
-- While using a symlink to stick the Previews on a HD is clever, it may also defeat the whole purpose of using your SSD. Previews are read a lot and are, I suspect, used for all adjustments at less than full resolution. (N.B. I could be VERY wrong on this.) Thus, depending on the amount of RAM on your Mac, you could end up reading and rereading your Previews over a slower link and doing this a lot. You own use will quickly determine if this is an issue or not.
I have blathered on, at length, about what I think matters for size and speed here: https://discussions.apple.com/message/17959625#17959625. Some of this may be of use.
I went through a lot of these issues when I tried to fit everything on a 128 GB SSD, so I know some of the issues you are facing. As I noted before, you really only need a Library (minus most Masters) of about 30 GB and that is with large, high quality Previews.
I actually took the SSD out and stuck it in an ancient MacBookPro (in preparation for a trip to Blighty this summer) and have not noticed a huge drop in Aperture speed. (I do miss the speed of applications launch, restart, however.) One thing that I did find that made a small, but nice difference, was keeping all of the Masters on a separate, dedicated drive. Once defragged, etc. that was very fast. Don't know if you could achieve the same results by partitioning a larger drive, but it might well be fun to find out.
DiploStrat

2005 Help center is it complete or is it the wrong file..?

Ihave just downloaded the 2005 sdk help Center to get some information abou the UserQueries Object and the downloaded file (b1_sdk.zip) starts off with the homepage titled
'SAP Business One SDK 2004' !! and no ref at all to the UserQueries Object.
so question is twofold
is the 2005 SDK helpcenter incorrect(ie Wrong file linked)
and 2 where can I get some detail about the UserQueries Object
thanks..

https://www.sdn.sap.com/irj/sdn/developerareas/businessone
is where I got it from.
Looks like you have found the same error,
i installed the 2005 sdk from a 2005 release CD but the help file was NOT installed with it ,(and the CD is at the head office)
But if there is a link to the correct file anywhere I would appreciateit
thanks
Maybe someone from SAP can correct the file and let us know
Message was edited by: George Savery

Adobe Inserts the wrong file

I am creating a new PDF document by combining existing PDF files. When I go to insert one file it keeps inserting a different file. The preview picture of the file I am trying to insert is correct.
I have tried restarting my computer. Deleting the file I want to insert and remaking that file. Also, I renamed the file as something else. None of these have worked.

Are these fill-in forms?
Is it filling in the "wrong" form which you've already inserted?
If so, this is as expected. If you combine forms with the same field names, you can only have one value per name.

HT5071 Please Help! how do I fix this error: "The title of the Table of Contents in portrait view is placeholder text : Book Title. Please redeliver your corrected full book file with a custom preview file. "

Urgent.
I have been not approved of this error
been back and forth with Apple
The title of the Table of Contents in portrait view is placeholder text : Book Title. Please redeliver your corrected full book file with a custom preview file. The book will not go live in the store without a matching custom preview file."
1st, how do you clarify the Table of Contents issue. No idea what I am doing wrong
2nd what is a customr preview file? I uploaded a sample book already.
Please advise ASAP
my email: [email protected]
thanks

I double check my table of content and I do not have a place holder... so I don't understand the error.

How can I see the path from the preview file (*.prel) to my video files ?

Because a lack of hard disk space I have moved my video files to another drive and therefore unfortunately destroyed the relative connection to the preview file (*.prel).
Therefore the videos are not to be seen in the preview file any more.
How can I get information about the relative path between the preview file and the place for the original video files so I can get those back in the original position ?
or:
It may be possible to change the path for every clip in my preview file - but how ?
I can read answers in English, German or Danish.

hansk
What version of Premiere Elements on what computer operating system?
Generalizing for now...
If you know where the files are by actually seeing them in their hard drive save location and you are getting "Where is the file ______?" messages, then you use those
messages to reconnect the source media to the project. Are you getting those messages and have you tried for the reconnects that way?
If edits are involved in the files that have become disconnected to the project, you can also consider the program's Replace Footage feature.
ATR Premiere Elements Troubleshooting: PE11: Replace Footage
Typically either of these ways is one at a time reconnects. With the "Where is the file _____?" message way sometimes you get lucky (depends on the circumstances) and more
than one file at a time might reconnect.
Please review and consider. Any questions or need clarification, please ask.
ATR

I want to upload a Banner to my iTunes U page. The banner file has all the requirements like as, kind, size, frame, and etc. Infortunately, I could not upload the file. It does not show in Provider Page Configuration or the preview. Someone could help

I want to upload a Banner to my iTunes U page.
The banner file has all the requirements like as, kind, size, frame, and etc.
Infortunately, I could not upload the file. It does not show in Provider Page Configuration or the preview.
Someone could help me?

Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.

How to Enable the Preview of PDF Files in 64-bit Windows 7

If you are running the 64-bit version of Windows 7 (or Vista), you will find that your PDF files do not preview in Windows Explorer as they do in the 32-bit versions. Instead, all you see is a message stating that This file can’t be previewed. To enable this functionality on your 64-bit operating system, follow these steps.
1. Click the Orb (Start Button).
2. Go to the Search programs and files textbox and input regedit.
3. Select regedit.exe from the results.
4. When the UAC prompt appears, click the Yes button.
5. In the left pane of the Registry Editor, go to (and select): 
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{DC6EFB56-9CFA-464D-8880-44885D7DC193}
6. In the right pane, locate AppID.
7. Change AppID value to {534A1E02-D58F-44f0-B58B-36CBED287C7C}.
8. Restart your computer for the change to take affect.

still get "c\This file can't be previewed" in right pane of Windows Explorer for all PDF files.
OS is Windows 7 Ultimate, 64 bit.
Acrobat is 9.0 Standard
Acrobat Reader XI also installed (ver 11.0.10)
changed the registry AppID and get same results.
Any more suggestions?

I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next

I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next time is launches. I get the same message the next and every subsequent time it launches so I can't launch LR at all now.
I get that the preview file got corrupted somehow. Is there some way to fix this problem without building a new catalog?

Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You need to delete that folder and then start Lightroom again. Lightroom will generate a new previews folder.

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

Is there a way of printing the file name from within the Preview application?

If I'm printing a file within Apple's Preview application, I sometimes want to be able to print the file name at the edge of the document. Does anyone know of way of doing this?

Thanks for replying, that goes some way to answering the question, but I'm also looking to see how much space each app and its associated documents are using, i.e. Pages comes in at 112Mb for the app alone, but I'd like to know how much space is being used by the documents as well.
Once again thanks,
SG

I am trying to load "The Sims" for OS X 10.1 and higher; first time the game would lock up after the preview, now I can't even get the installer to load after sending the original installation to the trash. What could I be doing wrong??

I have "The Sims" suite (The Sims, Livin Large, House Party, Hot Date, and Unleashed). During the original installation, I could not get teh third disk to install (House Party). I definitely installed them in the correct order. Then, I went on to load the last two CDs, but when I install the last CD, to begin play, the game locks my system downafter the preview.
I sent the entire Application to the trash (I'm assuming installing this in the Applications section of teh HD is correct), and tried to re-install. Now, the initial Installer on The Sims primary CD will not respond. I have to force quit to unlock the install.
I have an iMac with the 3.06 GHz Intel Core 2 Duo, with 4 GB Memory (4 GB 1067 MHz DDR3).
Can you tell me if I'm doing something wrong, or if my system does not have enough memory to handle this program? I already have The Sims 2 and 3 with several expansion packs installed - never had a problem operating or installing them. I still have at least 50% of my internal memory available.
Thanks,
Joe

For some reason SpeedGrade updated through the Application manager. I tried downloading the updates from adobe's website but it won't install. Prelude's update fails before it can even get started whereas the extension manager does install but it doesn't seem to be updating.
I've done as much investigation as I can think of and I'd rather not create a new user just to check that out but if I have to I will. How exactly do I create a new user on a mac?

Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents.

Excel 2010: I get the error message "This file can't be previewed because of an error in the Microsoft Excel previewer." even though Advanced Properties is set to Save Thumbnails for all Excel Documents and I've run Repair on Microsoft Office.
I don't know what else to try.
Any help would be appreciated. Thanks.

A hotfix request has already been submitted for this issue and we have also documented it here
http://support.microsoft.com/kb/983097
Thanks.
Tony Chen
TechNet Community Support

"Premiere Pro stores the preview files in a folder you can specify" But how?

Specifying a Preview folder
On page 265 of the PDF it states:
Premiere Pro stores the preview files in a folder you can specify.
QUES 1
But how do you specify the folder? I just rendered a test clip and was not offered the option of specifying a folder. And there is no other mention of preview folders in the PDF.
Preview Files for Encoding
On the same page is:
Note: Adobe Media Encoder does not automatically use Premiere Pro preview files for encoding. To make use of the Premiere Pro preview files, you must select the Use Previews option in Adobe Media Encoder for each encoding process.
It is not clear from the PDF what is the quality of these preview files.
QUES 2
If I select the Use Previews option when exporting, aren't I degrading the quality of the export by encoding from an already encoded preview?
QUES 3
For the absolute best quality, should Use Previews be turned off?

Preview File location is determined in the overall Project Settings.
Set this location before you render any Preview Files.
Project > Project Settings > Scratch Disks...
Some documentation regarding the Scratch Disk location is buried here:
Specify scratch disks to improve system performance
QUES 2
If I select the Use Previews option when exporting, aren't I degrading the quality of the export by encoding from an already encoded preview?
In most (if not all) cases... yes.
Previews are intended for real-time playback in the Timeline only.
You should not use previews for export.*
QUES 3
For the absolute best quality, should Use Previews be turned off?
Yes!
*There are a few semi-obscure exceptions to this general rule.

LR4 The wrong file information in the preview loupe

Similar Messages

Maybe you are looking for