LR5.3 CC Catalog does not open all folders.

Hi !
Last week I upgraded from LR4.3 to LR5.3CC on Windows 8, and since them I'm facing issues with the catalog.
I have about 80.000 pictures in one catalog, splitted in subfolders by date. If I click in the main folder (Photos), I can browse all pictures:
All works well until Feb 10, 2011. When I click on the date, it gets highlighted and all works well.
But, when I click on any date following Feb 10, 2011, it does not highligh as expected (actually it becomes only a little bit brighter), and it does not open the folder for browsing, but the navigator shows the first picture in the folder. The picture counting for each folder is correct. When I add more pictures and more folders to the catalog the folders and countings are updated, but the problem remains in the new folder.
What have I tried so far.
1) I inspected the folders looking for strange files - didn't find any.
2) I recreated the whole catalog.
3) I created another catalog for some of those non working folders, and it worked fine.
4) I optimized the catalog.
5) I rendered 1:1 previews.
6) I rebooted LR and Windows.
It's very frustrating. Never had a problem with LR4.
Any suggestions ?
Thanks in advance,
Ronald

Optimizing the catalogue was a good move.
I wonder if this is a variation of the bug where Lightroom fails to display long lists on Windows. Usually after about 1600 items, keywords for instance, any subsequent ones are hidden. So I'm thinking 11th February might be the 1601st.
What happens if you add a year folder and drag the date-folders under it? I'd just create one year initially, 2010, and then see if folders after 2012-02-11 behave normally.
John

Similar Messages

Firefox does not open all the tabs kirloskar brothers limited portal

firefox does not open all the tabs kirloskar brothers limited portal

Hello,
To find the correct solution to your problem, we need some more non-personal information from you. Please do the following:
# Use ONE of these methods to open the Firefox Troubleshooting Information page:
#* Click the menu button [[Image:New Fx Menu]], click on help [[Image:Help-29]] and select ''Troubleshooting Information''.
#* Type '''about:support''' into the Firefox address bar and press the enter key.
# At the top of the Troubleshooting Information page that comes up, you should see a button that says "Copy text to clipboard". Click it.
#Now, go back to your forum post, right-click in the reply box and select '''Paste''' from the context menu (or else click inside the reply box and press the Ctrl+V keys) to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
Thanks in advance for your help!

LR5.7.1 does not recognize all files on SD or CF cards?

I have been using LR 5.7.1 through creative cloud. Using LR since verison 1 ) Using a card reader to import, LR now does not recognize all of the files on either SD or CF cards. To get LR to see all of the files, I must close LR and sturn off comptuer and back on again. --then LR might see all of the files on the cards. The lats time, LR saw the files, I clocked "import" and LR make the smart previews BUT when started to make the regular previews I watched the previews turn black right before my eyes. Now I Have no files--they are all black. I quit LR and looked at the files in Finder--all of the files are black there too. What has hapened and what can I do to get my files back. I put the card back into the camera--and the files are not tiny and it says "unidentified files" on teh camera LCD screen.
. What can I do? I'

Card reader—never thought of that. I tried a new card reader and test shots on other cards with both cameras. All seems to be working fine now. I even put in the old corrupted card and the same corrupted images are still black but the good ones are still good. Thanks again for your help. I have a big job coming up and I was quite worried.

Mac does not list all folders in a SMB share

Hi guys, this is a bit of a weird one and I've tried everything I can think of.
In our house we have a media centre running Windows 7. It has several shares, one of which we'll call folder "X". Folder X opens correctly on the media centre, and any other Windows machine perfectly. Almost every other machine in the house is running OS X 10.6, and one of my housemates today noted that some of the folders inside of folder X were not listed on a Mac. So far we've tested it on 2 Macs and 2 Windows machines, and everytime the Windows machine lists all folders inside of X, where the Mac does not. The weird thing is, it's cutting them out alphabetically, so it's basically from D through to I that are missing, all in all there are 30 (out of 160) folders missing inside of Folder X...here's what I've tried.
On the Windows 7 machine:
-Restarted server service
-Removed Share X and re-added
-Checked share permissions on folder X
-Checked permissions on folder X, propagated to all child folders just in case.
-Restarted machine after every change.
On the Macs we haven't really tried much as there's not much we can think to change. We've tried Finder, Path Finder (which I'm guessing will be exactly the same), restarting, removing from workgroup and re-adding...I can't think what would cause such a weird problem.
To make things harder we don't know exactly when it started happening but the OSX machines definitely used to list the folders and it happens on more than one mac. which I guess makes me think it's something on the Windows client. The 30 folders are not using any nonstandard characters, some are only a few letters long.
Ideas on a postcard!?

Reporting the same problem.
1. Have Windows 7 MediaCenter with file sharing set up properly (LM+NTLM Authentication allowed and 128-bit encryption disabled in security policies).
2. Test folder ("C:\income") and all the subfolders' owner is 'Guest', full access is granted for everyone.
3. Connecting to MediaCenter from MacBook with Finder by pressing Cmd+K and typing smb://ip-addr/income
4. Finder connects successfully, but some sub-folders and files are not being listed.
Workaround:
5. You can open a not-listed folder directly by pressing Cmd+K and typing smb://ip-addr/income/some-invisible-folder
6. Voila! You're inside invisible folder.
In the meantime, i can see all the sub-folders on a Windows XP client machine, so i can make a conclusion that all of these 'invisible' sub-folders are actually accessible by Finder, but in some reason are just not being listed on Mac.

Media Browser PP CC does not display all folders

Using Premiere Pro CC. Windows 7. 980x, 16 Gb RAM, 2x Radeon 5800
I have one very large folder for documents that I back up regularly on my secondary D: drive keeping as much as I can off the C: drive which is an SSD.
The folder does not show up in the media browser or when I try to link footage. All the other folders on the drive show up.
I can scan the entire D: drive and it will eventually find the files, but it would be better to be able to view and select the folder itself.
Any suggestions?

Hi doc3d-99999,
Sorry about the trouble you're having. For that kind of thing, please file a bug report. The form is here: http://www.adobe.com/go/wish
Thanks,
Kevin

Aperture 3.5 does not open all files in external editor (PS CS6)

When I select several photos in Aperture (which are parts of a panorama serie for example) and click choose to open them in the external editor (here Adobe Photoshop CS6), only a random subset are opened.
Aperture warns me if I want the (for example) 14 pictures to be exported for edition, I confirm, but I end up with only (for example) 9 photos in Photoshop. The missing ones can be any photos (not necessarily the first or latest).
Note that 9 is not an upper limit, I once opened 23 photos and only had 21 in Photoshop opened.
If I again select those same photos and choose to export them (either as PSD using the same format as with the Editor command, or asking for the original that was created for the external editor) to a folder. Then when I open all the photos at once form the finder (or Bridge) to Photoshop, I have all the photos in Photoshop. So Photoshop has no problem opening the files.
Do you have the problem too? How do you solve it?
For the time being I manually export the files, open them from the Finder, stitch them in PS and reimport the result in Aperture.
A bit tedious... If there is no work around, I will try to fiddle with some automation...
Final note:
PS CS6, Aperture and OS X are all at there latest respective versions (i-e respectively: 13.0.6, 3.5.1 and 10.9.2)

I was just noticing this issue with A2.0.1
Selecting multiple files in A2, only one would open in Photoshop.
I have found that, if when opening files from Aperture, the color setting profile in PS is different than the color tag in the image, such as sRGB vs aRGB, the mismatch warning appears and stops subsequent photos opening.
If the image profile matches the color settings in PS, then all selected photos open from Aperture to PS.

Quicktime Does Not Open All Movies

I have a video that was made in 1997, stored on a 1.44MB diskette, and now I'm trying to open it with Quicktime. Quicktime simply comes up with a white screen but goes through the automation.
The Type is "MooV' and the Creator is "TVOD". I have never heard of this type or creator. I have tried several different applications that work with videos without success. I know the video is there as some of the video applications show a proper thumbnail image of whats in the movie.
I would like to translate this to Quicktime. Some of the older software allowed this.
Can anyone help me?
Bud

You can try VisualHub from Techspansion:
http://www.techspansion.com/visualhub/
Also, try dragging the file on top of RealPlayer 10 while holding
down both  and Option (Apple Option) keys. RealPlayer is supposed
to be able to handle QuickTime files, it may even be able to open some
supported files that the current version of QuickTime will not open.
RealPlayer is available here:
https://order.real.com/pt/order.html?country=US&language=EN&mppi=0&mpposlist=0&mpst=0&ppath=cpmacpl060204a&pageregion=player_button&pcode=rn&opage=realh ome_spmac_bb&src=realhome_spmac_bb_0_1_1_0_0_20
( If the above link does not work, go to the front page, http://www.real.com/ , and select the blue button near the top right, " RealPlayer - Free " ).
If you are not able to open it with either of the two suggestions above, you can send me the file, and I will try to open it. I am almost sure that I can find a way to open it.
Hope this helps, take care.

Boot Camp 3.0 recognises Mac HFS drives but does not list all folders

Hi
I have just done a clean install of Boot Camp/Windows XP using the Boot Camp 3.0 drivers that come with Snow Leopard, and was pleased to find native support for Mac Drives (HFSJ). Whilst all of the Mac drives in my Mac Pro are recognised and can be opened and explored in Windows explorer, a number of folders in one of the drives didn't show up. I could access them by typing the exact path in windows explorer, but when using the mouse to open the drive a number of folders could not be found. Furthermore, windows applications, such as media libraries, would not pick up any files in the folders that couldn't be seen in explorer.
I went back to OSX to check that all of the folders were indeed present and they were. So in the end I reverted to using my Macdrive software again and all of the folders showed up again and worked as expected. So, it may be that the new bootcamp drivers are not all they are cracked up to be.
Anyone else experienced similar issues, or got any clues as to what I might need to get this working right?
Thanks
Nick

I am having that issue, but haven't worried about it since I've only booted to windows 2 times since the upgrade. Both times I've experienced a much more aggravating problem. Both times in order to reboot to OSX I have to use the install disc to repair the OSX drive because something renames it to "disk1s2" plus some counts are invalid. I use Macdrive, but since SL the mac volumes appear just as any other drive icon. Using Parallels or Fusion works as it always has, automatically shutting of Macdrive which leads me to think that Macdrive may be the culprit. Gonna try disabling it completely while running virtual and see if that makes it work. If not it'll just be another aspect of my Mac that Apple updates have made useless.

"Edit with" does not open all selected photos in PS3

If I select several photos and then click on "Edit with" Photoshop, often only one or a few of the selected photos will actually open up in Photoshop. Does anyone have any idea how to fix this?
Thanks,
Peter

petermax wrote:
If I select several photos and then click on "Edit with" Photoshop, often only one or a few of the selected photos will actually open up in Photoshop. Does anyone have any idea how to fix this?
Thanks,
Peter
hey, peter
all selected photos should be opening in Photoshop as the external editor unless you're in Primary Only mode. click the Primary Only button icon that has the 1 in it, it's between the Viewer and Browser on right side
victor

Dragging files to TextEdit icon does not open all of them

Hi all,
Many times I have to work with .doc files that contain smalls amount of text to be copied and pasted. So I don't open Pages or Word, TextEdit handles this documents quite well, unless I want to open a few of them dragging their icons over the TextEdit icon in my Dock. Some will open, some will not, so finally I have to drag those that didn't open to TextEdit afterward.
Then, the files open and I continue to work with them with no problems.
This looks like a bug, is it known? How can it be reported to Apple?
THank you.

The problems that you have encountered are most often caused by the CODEC that the files were encoded with. Both AVI and MOV are wrappers, and can contain a lot of different CODECs.
For the MOV, I'd look into QT-Pro for about US$39. It's just a registration key, but unlocks some decent power in QT. If the MOV plays fine in QT (Audio & Video), just do a Save_As and choose "Self-contained" MOV. Locate this in a separate folder. Then, Import these MOV files into Encore.
Personally, I'd use Premiere Pro as an intermediate step, but if you do not do any editing, Encore *should* then be able to handle everything. From PP, I'd Export as elemental streams, DV-AVI for the Video only and AC3 for the Audio only. These would get Imported into Encore.
Good luck,
Hunt
PS - you might want to also post a link to the Encore tutorials, that you think were most helpful, as people always are asking for these. A list of good ones, could save others a lot of Googling - just a thought.

Is there a way to make PSE 13 NOT open all my photos when I open the program?

Is there a default location when I can change it so that when I open PSE 13 Organizer it does not open all the photos in the Album? I would rather that It just opened the Folders and let me choose which file to open. I have Windows 7 if that makes any difference. thanks...

Is it the same question than in this post ?
PSE13 Organizer display (folder vs. album view) - Elements Village

Bridge CS4 does not open in last folder user

Bridge does not open all of the time in the last folder used. It will open in a previous folder.
Any ideas?

You need to exit Bridge before shutting down for a return to your last folder.
I think it should automatically exit when you shut down so you will return to the folder you were last using.
This occurs when you have bridge set up to launch at start up, which is great in itself.
CS4 bridge is so improved from CS3 in speed and reliability..thanks to Adobe!
D

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

Transaction MD04 does not show all open sales/orders deliverys

Hi,
Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
Can anyone tell me the reason for this?
Regards,
Brijesh

Hi
Run SDRQCR21 report in Transaction SE38 for that material it will resolve your issue.
Please confirm
Amit

I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved

I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved to emails. Help! How do I get my iPhoto back?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

LR5.3 CC Catalog does not open all folders.

Similar Messages

Maybe you are looking for