LR5.3 edit in CS6 13.0 gets file type wrong

In LR5.3 I have settings for edit in external app set to TIFF file format. When I edit custom file naming for this, it defaults to PSD and when edited in CS6 13.02 it is indeed PSD not TIFF and in custom naming I can't see how to change the default.

This girl here found the fix:
How to Manually Fix Updates on Adobe Photoshop CS6 (from 13.0.3 to 13.0.6) on Mac with Retina Display |
Basically, all you have to do is update the Application Manager (if your installation was like mine, I was still on v.6... it's up to v.9 now. Go here for the update: Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager and run it... when done, launch Photoshop and check for updates.
This is amazingly idiotic, I must add -- how does App Manager NOT update itself through the update process???

Similar Messages

Why is Get File Type.vi password protected

Hi... We have a code that was developed in LabVIEW 8.6... We have a need to attempt to save this code all the way back to version 7.1... I saved it back from 8.6 --> 8.5 --> 8.2.1 --> 8.0 with no issues... But when I then try to save it back from 8.0 to 7.1 I encounter one LabVIEW 8 vi that has no equivalent functionality in 7.1... And that one vi is
C:\Program Files\National Instruments\LabVIEW 8.x\vi.lib\Utility\lvfile.llb\Get File Type.vi
When I look at that vi in 8.x, to endeavor to see if I can replace its functionality by writing some code in 7.1, I find that the Get File Type.vi is password protected... More out of curiousity than anything, why is that code password protected??? I wasn't aware that any of the standard purchased LabVIEW code came password protected... Can anyone tell me why that is??? thanks... bob..
Solved!
Go to Solution.

That VI is using an internal callback into LabVIEW (i.e. non G-based code) to determine the type of the file. I'm guessing the callback doesn't exist in 7.1, so you would need to write your own G-based implementation for getting the type of a file in the 7.1 case. The simplest solution would be to work with the extensions of the files...not perfect, but probably close enough assuming your files are well-named. Also, the following VI can give you a bit more information about LabVIEW-specific files (independent of extension):
LabVIEW 7.1\vi.lib\Utility\libraryn.llb\Librarian Get Info.vi
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How get File Type Icon Image

how get File Type Icon Image (Windows )
FileSystemView.getSystemIcon( File );works in swing application, can not be used for javafx.scene.image.ImageView;

Hmm, good question.
Looking at the FileChooser, it looks like the native chooser is used so possibly the JFX guys didn't have to expose access to the icons to make it work. You might want someone to confirm, but my guess is there is no equivalent yet in JFX.
Assuming there's nothing, you could try the hacks in here to convert the image: Image conversion between AWT and FX
Failing that you're probably looking at raising a JIRA feature request to get it in a future release.
Cheers,
zonski
Did you find this answer useful? If so, please mark as 'Correct' or 'Helpful'.

How to get File type icon for files store on Amazons3

Hi,
i want to know about how to get file type icons for files that we store on Amazons3.i am a devloper ,i want to make gui for accessing amazons3.
so ,i want to know about how to get file type icons for files that we store on Amazons3.
thanx in advance.

hi,
have u heard amazon simple storage service,that provides storage space for
storing files, i am a devloper,i want to know the files that we store on amazon,how we can get file type icon for that files.
i want to sample code in java for this.
thanx in advance.

Need to setup Premiere CS6 sequence for two file types with different field orders

I have a client who has shot video for me using two cameras, one camera was set to progressive, and the other to interlaced upper field first. I need to use both file types in the edit and have been struggling to set up the sequence to get the best look for the end product, a DVD. I have several videos to do for her that were all shot in the same way, so I need a solution!
I would appreciate help figuring out how to set up this work flow from beginning to end.
Should I convert one of the files from the beginning so they match field orders before going into a sequence? Or do I just need to do some adjusting of the files once they are in the sequence? Is it just as simple as changing the transcode settings to favor the upper field first? I'm definitely having issues once the video is transcoded in Encore and you can see a lot of jagged edges and lines especially during movement. My client isn't happy and I've tried several workarounds, but to no avail.
Here are the two file types I have:
File extension: .MOV
H.264, 1920x1080, Linear PCM, 16 bit little-endian signed integer, 48000 Hz, stereo
FPS 29.97
No Fields: Progressive Scan
File extension: .MTS (my Mac finder can't read these files, but they are read in Premiere)
Image Size: 1920 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - 6 channels
Pixel Aspect Ratio: 1.0
Upper Field First
I am using Adobe Premiere CS 6.0.2
Encore 6.0.1
Media Encoder 6.0.2.81
I am running it on an iMac 27-inch, Mid 2011
with Mac OS X Lion 10.7.5
Processor 3.4 GHz Intel Core i7
Graphics AMD Radeon HD 6970M 1024 MB
I've just been setting the sequence to match the .MOV files since they look much better than the .MTS files. I've done the opposite as well, setting the sequence to match the .MTS files and it doesn't seem to help. I've also changed the field order of the files once they are in the sequence by changing the field options and have tried converting the .MTS files in the Media Encoder, but nothing I've done has worked.
Any help would be so appreciated! The client I have is a photographer, so she wasn't aware of this issue when she first shot these videos. So I have 10 videos with these issues I need to get back to her, hopefully issue free! I'm struggling as an editor because my last job I was using FCP and was working with videographers who knew what they were doing, so I've never faced such problems before. Plus I'm new to the Adobe software. Not a good combination. Please forgive me if I didn't give all the information you need. I will happily respond with whatever more information you may need to help me out!
~KTrouper

I wonder if you could do your edit ignoring any visual issues of the interlaced footage but keeping the different sources separate ( checkerboard edit Vid 1/ Vid 2 )
Lock it down then export the interlaced part of the edit as a Digital Intermediate.
Maybe Export the other source as well to the same codec. DI
Bring them back together in a New Sequence. You wold have to deal with the black spacing.

Using Photoshop Elements to edit raw. Doesn't recognize file type

I recently downloaded photoshop elements to use as my editor within Iphoto. I've set it up as the default editor in preferences, and made the appropriate change in the advanced settings within Iphoto so that it exports edits in RAW. When I attempt to edit by double clicking, Photoshop Elements gives me a msg that it can't open file because it does not recognize the file type. Does anyone know why this would be? I am using a Nikon D60. I haven't downloaded the Nikon software onto the computer (not sure if that has anything to do with it). Does photoshop elements need anything additional? Any help appreciated.
Thx
Richie

Richie:
As Terence mentioned we can help with using PSE within iPHoto but why PSE doesn't recognize the D60 files is an Adobe issue. I believe there are Adobe plugins available to handle RAW files. Check the Adobe site for those. For using PSE to edit jpgs within iPhoto this may be of some help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How to Get File type in webdynpro abap

Hi,
I am using File Upload UI element of webdynpro ABAP to upload data into SAP table. I want that the file type should only be tab delimited. How to get the file type to validate the same.
Regards,
Dhiraj Mehta

hi,
just follow the link :
http://help.sap.com/saphelp_40b/helpdata/en/2a/fa02b7493111d182b70000e829fbfe/content.htm
Hope this will help u!!!
thanks & regards,
punit raval.

How to get file type within SPFile

Hi,
I have a document library and I would like to get the type of document so it can be displayed for the user
Currently I have this code
foreach (SPListItemVersion version in item.Versions)
if (version.Level == SPFileLevel.Published)
string fileicon = version.ListItem.File.IconUrl;
string filetype = version.ListItem.File.Item.ContentType.Name;
string filesize = (version.ListItem.File.Length / 1024).ToString();
string filetitle = version.ListItem.File.Item.Title;
string filepath = version.ListItem.File.ServerRelativeUrl;
Within the code I get the "ListItem.File.Item.ContentType.Name" and this always returns "Document" even if its a Word Document, Spreadsheet, jpg or PDF.
I really want to display, Document, spreadsheet, pdf, etc etc
How do I get this property??
Thanks
Marc

You can use the ListItem.File.Name property to get the full file name including the extension, you could then parse this to get just the extension and determine the file type based on that.
Note that when parsing the file name, if you try to do it by splitting the filename using the period symbol "." as the seperator you will need to allow for file names which contain multiple period symbols. You may be able to use the System.IO.FileInfo class to help, it has an instance property 'Extension' which should take care of that for you, though getting an SPFile into a FileInfo object may be more hassle than just writing your own quick parser, I haven't tried it.

How to get file type

Hi,
Can anyone help me on how to find the input file type i.e. pdf or txt or word.
Is there any function similar to what we have to get the filename in OSB.
In fact I have a requirement where I have to send a mail with the attached incoming file and the incoming file can be of any type.
Please help me as I need this urgently.
Thanks in advance...
Regards,

Hi,
You can use xquery function tokenize($input,$pattern) to separate file name extension alone from complete file name.
And for sending email with attachments follow this tutorial. http://blogs.oracle.com/christomkins/2009/04/sending_an_email_with_an_attac.html.
Thanks,

Get file Type

Hi
Need to get the Check file type into a varaible .
eg : '.TXT' or '.WTX' etc from a path C:\Documents and Settings\name\desktop\file.txt or file.wtx etc ....
Thanks,
Vind

To make this happen follow the following code.
SPLIT p_file AT c_dot INTO lv_file lv_ext.
TRANSLATE lv_ext TO UPPER CASE.
Here p_file is the variable containing the file path data.
In our case lv_ext is the variable which would contain the type of the file you have selected.
Reward if found use full.
Thanks & Regards,
Rama Murthy.P

Get file typs

I am using cfdirectory to read a directory but I need to get
the extension of the files in the directory. I cant seem to find
anything about it. I can get whether its a file or directory with
cfdir... but not the extension such as if the file is jpg, png,
html, or swf etc.. I have searched high and low with no luck. Is
there a way to do that?
thanx
dave

quote:
Originally posted by:
SpiderFromMars
This is the best example to use! Very tight!!!
I would, however, put the CFOBJECT tag outside of the loop
and desolve it at the end.
<cfset scan_dir
="C:\path_to_whatever_you_want_to_query">
<cfdirectory directory="#scan_dir#" action="list"
name="qryDir">
<CFOBJECT TYPE="COM" CLASS="Scripting.FileSystemObject"
NAME="FSO" ACTION="CREATE">
<cfloop query="qryDir">
<cfif Type is "File">
<CFSET path = "#qrydir.name#">
<cfscript>
theFile = FSO.GetExtensionName(path);
</cfscript>
<cfoutput>
The file Ext is: #theFile#<br>
</cfoutput>
</cfif>
</cfloop>
<cfset FSO = ''>
Yeah that would probably keep some of the overhead down
setting the COM object outside the loop.

CD albums in iTunes (12.1.2.27) won't load to iPad - gets file type not supported message

I just updated to iTunes 12.1.2.27 and synced to my iPad, but all of my CD albums that are in iTunes on a mac-mini (Yosemite 10.10.3) won't sync now. A sample message is:
"song title" was not copied because the file type is not supported by the iPad "my iPad name"
There where a hundred songs on the list. My iPad is on IOS 8.3. I have never had this problem before. Songs purchased from iTunes store are there, but not my own CDs.
Has anyone seen this problem before? What is the solution?
Rolf

Problem solved! Apparently way back in November of last year I made a copy of the iTunes library on my time machine backup disk manually. I just created the folder on the drive. This was because I was updating the system and did not trust anything to work properly afterwards. The iTunes folder was sitting on that drive and iTunes (for reasons I don't understand) started using parts of it. I noticed this when I tried to play one of the songs from my CD albums. The backup disk would mount and spin up and play the song from there.
By the way the iTunes preferences were set to look at the iTunes library on my mac-mini system disk not the backup drive. Why it went to that backup drive I will never know. Anyway I renamed the iTunes folder to something else on the backup drive. Now when I play a song from an album it goes to the proper iTunes library (the one on my mac-mini disk). Subsequent to this fix a sync to the iPad copied my albums properly with no error.
Rolf

Getting file types in directory structure.

I have a directory with 5000 files in it in 1000 folders. I
need to parse through all these files and construct a list of file
types (.jpg, .doc, .pdf etc) These types will be entered into a
database table so we have a distinct list of file types that we
have. I'm just wondering what everyone's opinion on the easiest way
to accomplish this is. Obviously CFDIRECTORY comes to mind doing
some crazy loops, but I started and was just thinking there might
be a better/easier way to do this.
Any suggestions?
THANKS

Yeah I got that part as far as parsing out the file type from
the name that cfdirectory spits out. It's the recursion of the
dierctories that I'm having problems with. If it was just one
directory full of files this would be a snap but there are
directories 3-4 levels deep. Just trying to figure out the best way
to loop through the files in a directory but also loop through
files in sub directories.

My jpg files from CR2 edits in CS6/CC are not being imported into LR5.

My jpg files from CR2 edits in CS6/CC are not being imported into LR5. Bridge and Explorer can see them ok. Tried to reimport but LR5 cant see them.
The file numbers are the same as original CR2 but have the jpg extension. TIFFS and PSDs seem ok. Can anybody help please?

how do I get all these files in my catalogue in the correct places cos they scattered around a bit
That's kind of a broad question ... and there are many different approaches ... so I will explain my approach, and other people can explain their approach.
My approach is to assign keywords and optionally captions and titles and other metadata to all of your photos, and use those to organize and search. Then, it doesn't matter what folders things are located in, if you want to see all your pictures of Chicago, you simply click on the arrow to the far right of the keyword Chicago. You don't have to remember what folders to look in, and this works even if the photos are scattered in a dozen different folders. In addition, since photos must be in one and only one folder, that limits your ability to organize; but you can assign as many keywords as you'd like to a photo, so a single photo can have keywords "Chicago" "Zoo" "Elephant" "Vacation" "Illinois" "United States" etc.

If I'm in Lightroom 5, and try to Edit in Photoshop CS6, I always get the following message: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.6 for full compatibility." But I have updated to 8.6 and have no remaining updat

If I'm in LIghtroom 5, and try to Edit in Photoshop CS6, I always get the following message: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.6 for full compatibility." But I have updated to 8.6 and have no remaining updates. How can I fix this?
If I click "Open Anyway" or "Render using Lightroom", I get the following message:
"Adobe Photoshop CS6 cannot be opened because of a problem.
Check with the developer to make sure Adobe Photoshop CS6 works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X."
Please tell me what to do so I can edit from Lightroom to Photoshop.

In Photoshop, if you choose Help - About Plug-in... - Camera Raw, does it say 8.6?
Seems to me there was some hiccup they found in the update process, which prompted this:
Camera Raw updates cannot be applied
I honestly don't know if the problem could apply to 8.6 as well, which is why I asked you to check to make very sure you really got it.
-Noel

LR5.3 edit in CS6 13.0 gets file type wrong

Similar Messages

Maybe you are looking for