LR5.5 Cannot rate individual images in grid view

Here's the problem I'm having on LR5.5 on Mac 10.8.5:
In grid view, I select a range of images and hit "N" to go into Survey mode. When I highlight a single image and type a 1-4 rating it assigns that rating to every image selected in the survey. Even hitting "E" to enter Loupe mode from Survey mode does the same thing -- all images selected in the range are assigned the rating, not just the highlighted image. This is a big change from previous versions of LR, making it difficult to compare images and rate individuals.
Has anyone experienced this problem and/or found a solution?
Thanks very much.
-Brett
www.brettsimison.com

Trying ticking it and unticking it to see if it is stuck. It works fine on the two systems I've tested.

Similar Messages

LR5 slow performance selecting images in Grid view

LR5 is noticeably slower than LR4 when CTRL-click selecting a group of images in Grid view in the Library module. There is frequently (but not always) a pause of up to a few seconds before an image will show as selected. Also, when I try to grab the selected images and drag and drop into a collection, the images will be deselected if I try this too quickly.
Nothing changed on the computer since the upgrade from LR4.
PC running Win7, 64 bit
i7 processor, 8G RAM
lots of HDD space
LR running off the C: drive
thanks
Bill

Trying ticking it and unticking it to see if it is stuck. It works fine on the two systems I've tested.

Moving images within Grid View in LR3beta2

Frustrated. In LR3Beta1 I could manually move and place images within Grid View or from the slide view at bottom for purposes of sorting "similar subject" content within a specified Text/Attribute naming. All of this was accomplished from the Parent folder, with no need for drilling down the Tree.
Now, since installing LR3Beta2 I can no longer manually move (sort) within Grid View...unless I am in the lower most folder of the tree. This change is not practical since a tree folder may not match the relevance of my specified Text/Attributes.
Can anyone tell me what I may be doing wrong, or is the ability to manually sort from Parent folder no longer an option?

Here's an example of how I catalog/label/sort my images...
Architectural images project - 3 locations of shootng, 4 areas of focus: Doors, Windows, Facades, Walls
So, I may have 20 images w/both a door and a facade in the shot, 20 images with a window and a door, etc. I prefer to Keyword all of the images as Architectural, and then Keyword those applicable to Doors, Windows, Facades, Walls, etc.
Now, suppose those all go into a folder labeled Architecture.
The next week I get an assignment for Urban settings. It may include shops, churches, etc. However, within those, I decide to Keyword (where appropriate) Doors, Windows, Churches, Shops, etc. That project goes into a folder labeled Urban Settings.
Now, let's say I have a request specifically for "Doors". Now, those Doors are spread across multiple folders at this point so I have no opportunity to manually sort all of the doors my similar content if they fall into multiple folders. Doesn't matter that I have pulled up Doors through Text, I still cannot sort them by similar style, shape, color, etc since they are spread across multiple folders.
In the 1st beta, I could slice and dice a hundred ways to arrive at a final view and then...sort those so that they always appeared that way whenever I called them up again. Didn't matter that they were in multiple folders. That was extremely useful and...sweet.
Any ideas?

I guess there are not phone support... I cannot drag images from grid view into collections.

I have been trying desperately to fix this issue. I cannot drag any images from the grid view into collections. Can anyone help? I looked everywhere for a customer support number but I was not able to find one on Adobe Website.

Hi,
Only a couple of things I can think of:
1. Make sure it isn't a Smart Collection, and
2. Drag by placing the cursor on the actual picture NOT the grey area surrounding the image.

Cannot sort images in grid view?

I am trying to re-arrange the order of images in the grid view by mean of drag-and-drop, but LR doesn't allow me to do it. I also manually selected "User Order" from the sort menu with no effect. It is happening only with the latest bunch of photos I imported (both in Collection and Folder), while LR still allows me to re-arrange my old images. I must be missing something obvious (not to me)... any idea?

User sort order comes up on this forum so frequently that the subject deserves to be in the FAQ, especially since user sorting is almost totally undocumented.
As Lee Jay points out, what is implemented is a design decision. There is a basic conflict here between user sort order and the existence of subfolders.
The current implementation has a few rough edges. For example, even including all sub-items in the top folder doesn't free up sorting as has been suggested, at least in my Windows version. Also, even if a sub-folder is empty, user sorting is still frozen in parents. BTW, a sub-folder is one recognized by LR. A folder can have sub-folders in the underlying file system not in the catalog. These have no effect as far as I can tell.
However, in all the cases I have tried, user sorting is available within and into stacks at any level regardless of whether sub-folders exist. I can move things around freely in a stack or from outside the stack (even from another stack) into the stack. Reversal is possible in stack-to-stack moves but not from a stack to the outside, unless the folder has no sub-folders. This fact might help work around the limitation in some cases.

Moving Images in Grid View

I can't for the life of me move individual images or groups of images around freely in grid view. The tutorial says to drag from the center of a thumbnail and drag it to the location you want it. I tried that and it just springs back to where it came from. I would like to randomly move images around in grid view and then number and rename. Any help is much appreciated
dgibb

I disagree. My point is that one should not have to keep in mind an underlying computing model in order to know when you can and can't sort.
In general (not a Lightroom point), as I'm primarily a PC user I'm used to climbing learning curves, but I love the transparency of Macs when I do use them.
That sorting isn't available in Lightroom just because I have an empty sub-folder makes no sense from the photographer's viewpoint.
It's not a big deal, but the sorting constraints are a clumsy rough edge in largely excellent UI.
js

Select multiple groups of contiguous images in Grid view

In Windows, the following conventions should be followed when selecting images in the Library module or Filmstrip.
1. select an image by left mouse click
2. extend the contiguous selection by Shift+left mouse click on the last image in group
3. add to the selection by Ctrl+left mouse click on an image
4. add another contiguous selection by Shift+Ctrl+left mouse click on the last image in group.
In LR V1 on Windows XP Pro, only 1,2, and 3 work; but adding a second contiguous selection (point 4) does not work and behaves like point 3. More images can only be added to a selection by Ctrl+left mouse clicking each individual image (which quickly gets tiresome.)
Note that these conventions work in both Bridge CS2 and beta CS3.

Second that!
Shift+Page Down to select next page down as well Ctl+Shift+End to select everything to the end of the grid would also be useful

Cannot preview remote image in design view

Hi,
I am using Dreamweaver 2004 MX and has just inserted an image referencing to a remote server.
However, Dreamweaver is unable to preview the image and only a small gray box can be observed.
I can preview it when the page in browser.
What's wrong with my DW?
Thanks

David_Powers wrote:
I'm not sure whether Dreamweaver MX 2004 has the ability to display external images in Design view. In Dreamweaver CS4, you turn this feature on and off by selecting Commands > Display External Files. If that option isn't available on your Commands menu, it means your version of Dreamweaver doesn't support the display of external files.
Unfortunately not, David. Handling external links was not introduced until DW8 (one after MX 2004).
Commands > Display External Files was introduced in the 8.0.1 updater for DW8 to enable this new (at the time) feature to be switched off.
http://kb2.adobe.com/cps/000/54d76ef.html

How to rate first image in stack view?

I am looking for the way to rate the first shot in stack view. It is outlined in yellow and the "selected shot" is in white.
Even right clicking on the actual photo and trying to change the rating only makes the rating on the "selected" shot.
What if the first shot is the best? What if I don't want to rate all of them or change the others?
How do I rate the first shot without getting out of stack view or without changing the order?

Sorry, but if I understand the program (which I may not) you cannot. By definition, the first image in your stack is your "pick" and therefore a "5". Maybe none of the "pros" that Apple consulted ever needed to use a shot that was less than a "5". I guess its only the incompetent few of us (like me) that ever needed just to make the best of an indifferent group (thank you Photoshop).
You might try not rating any of the group at all (haven't tried), at least your "pick" wouldn't be a "5".
Kidding aside, I would like to be able to accomplish the same thing. Ideally, a pick should be different from a rating.

LR 2.2 on OS X 10.5.6 - Cannot reject multiple images on 2nd display Grid

Hi there,
For some reason, if I select multiple images on Grid View on my 2nd display and click 'X' to apply the Reject Flag, only the first image selected will get the X Flag. However, if I do the same exact with the Grid on my primary display, all images selected will get the X Flag.
Any ideas on what could be causing this? Is this a feature that I am missing an understanding of?
TIA!
Brian

Hmmmm... thanks for the confirmation. It just seems so odd that Adobe would feel the need to 'classify' the 2nd display as a second-class citizen. Would it really be that much more resource-intensive to allow me to take action on multiple photos on the 2nd display?
Oh well, perhaps in a future build.

Lightroom 5.5 grid view fails to load some images. These do load in develop, then re-appear in grid. Re-installed 5.4 (after deleting 5.5, then emptying trash in 10.9.5) and it now exhibits same behavior. Suggestions?

These same images fail to load in slideshows; "loading" appears without the image ever appearing. I can export these grayed-out images and retrieve the image content in the exported file. Not being able to see all images in grid view is an inconvenience for sure; e.g., I can't review all the contents of a collection before posting it. This behavior didn't occur until I upgraded to 5.5. Now it has migrated back into 5.4, despite having selected 5.5 and emptying trash before the re-install.

Whoa this is happening to me...

Make Edit time and Edit count info available in Loupe Info, grid view option, Edit History panel and Smart Collection

We all know that Lightroom can sort images in grid view by edit time or edit count. I cannot find any way to display edit time and/or edit count in view option or loupe info. I think these should be made viewable. Without them, when you have a large batch of image and you previously edited only some and come back later to finish, you don't know which ones need more work, etc.
Another useful thing is that Edit History should have an option to show the date/time of the edit. It may be shown when mouse is hovered over an edit item line.
Similarly, smart folder can filter the images by Edit Time being before/after a certain date. However, if I have no way of knowing what the edit times and counts are, this feature has little use.
Alll of the above should be a specific date like 08-20-2009 or Today, yesterday, 43 days ago, etc. Both forms are useful for different purposes.

Good idea.
Also, it would be good if the SDK functions for updating custom metadata did not necessarily bump the edit time.

Can't Directly Rate my Images using Stars in Adobe Bridge CS3

Hi
I can rate my images in Adobe Bridge CS3 by using the drop down 'Label' menu. However, I cannot rate my image by stars directly under my image thumbnails as my book suggests I can. The book states: "You can also assign stars directly under the thumbnail by clicking on the dots".
Is there anyway I can do this? Do I have to change some preferences?
Many thanks in advance for anticipated help.

try resetting your preferences by holding Ctrl right after you launch Bridge(you have to be fast, you'll get a dialog box if you succeeded)
Though you'd need to do this only if you are doing it correctly in the first place. With a picture selected you'll notice 5 small dots beneath its thumbnail which you can click on to rate things. If you don't see the dots then increase the thumbnail size by adjusting the slider at the bottom of the screen

LR locked up 3 times in GRID view

I have read about this but never experienced LAG or noticible slowing. Today while going through images in grid view LR slowed and crashed not once but 3 times. The first time, the catalog got efft up and i had to use a back up from a aweek ago and lost edits...
SO, what in the world could have caused this?
you can bet I am backing up every signoff when I have work...
any ideas.

Well you could start by providing helpful information.... what you said is a bit like "my car stopped, is it out of gas"????
Which Lightroom version, where is the catalog residing, where are the image files, what OS, computer specs.....

How can I see the metadata in the grid view?

I am in View/Metadata Display/Customize and trying to set it so in the Grid view [which I take to mean the browser in grid style as opposed to list] and trying to have below each image the - Rating, version name, caption and keywords. I check my List and there are entries in all of those four categories. I checked the Grid View Expanded and all four are listed under Display Order. Adn Show Metadata below image is checked. But when I set it all up, only the Rating and Version name shows up no Caption and no Keywords tho there are entries in both and both are included in the list of the Grid Expanded View.
Any suggestions? I have unchecked and cleared out all those and reentered and reset them up and that hasn't worked.

Do they show up if you make the thumbnails in Grid View larger?
I'm pretty sure Metadata Overlays for Grid View and Viewer are limited to one line for Badges & Ratings & Color Labels, and one line for all other metadata (in both the Browser and the Viewer). Put your most needed metadata field first in the list. I often need to see Keywords, and I often need to see the timestamp, and I often keep my Images in grid view small -- so I've set up Grid View Basic to start with the timestamp, and Grid View Expanded to start with Keywords.
Of course, that won't be useful if enlarging your thumbnails in Grid View doesn't show the missing metadata.
"Show below Image" forces the line with the Badges, etc., to go below the Image. If unchecked, this top line of the Metadata Overlay is superimposed on the bottom of the Image.
Message was edited by: Kirby Krieger

LR5.5 Cannot rate individual images in grid view

Similar Messages

Maybe you are looking for