LR5 and the 5.4 Update

Good Morning,
I began having troubles yesterday after installing the 5.4 update. After numerous attempts to solve the problems I was having, with help from folks here, I ended up having to uninstall, then reinstall LR5.
This morning I reinstalled LR5 and the LR5.4 update. Everything works fine in the boot process. LR5.4 will load to the Library Module. When I click on the Develop Module, or any other action, I get the error message, "Adobe Photoshop Lightroom 64-bit has stopped working". I've tried restarting and only get the same results.
I am using Windows 8, LR5 with the 5.4 Update and had no troubles until this began yesterday.
Does anyone have any advice or a potential fix to this? I could not find any answers within any of the threads here.
Thanks.

You could try installing LR 5.3 and see if that fixes the problems.

Similar Messages

TS3694 I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please

I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

HT4623 I have updated my iphone 5 with IOS7. Now there is an update 7.0.2 on my cell and the size of update file is showing around 21.0 MB. I tried to update it ITunes but it seems it is downloading the entire IOS. Is there any separate update for the sam

I have updated my iphone 5 with IOS7. Now there is an update 7.0.2 on my cell and the size of update file is showing around 21.0 MB. I tried to update it ITunes but it seems it is downloading the entire IOS. Is there any separate update for the same or I have to download the entire IOS again?

Well when you download the update with iTunes it will always download the whole new version (in your case 7.0.2) even if its just an bug fix. If you already have 7.0 download the update over-the-air.
You already wrote that the update is only 21 MB, so its not the whole firmware package of 7.0.2 you get with iTunes.

I know why I have been having problems with FF 3.6.16 and the last thunderbird update

I am in Canada and for some reason downloads for both 3.6.12 FF and the last Thunderbird update was the BritishVersions thats why I have UK search engines, not the US versions maybe that is why I am have trouble with my email and addons. The other 2 computers in my house is the US versions.
But there is still something a bit screwey with 3.6.12 some of the addons are not working properly on the other puters. Can you please change the sofware to the US version please????? Thank you
I have deleted the software twice already. before realizing I was downloading the british version.....same problem with my Thunderbird can't connect to isp even though everything is done correctly!!!!! Help!!!!!

You probably can do that.<br />
If you keep the wrong language then remove the offending language pack from the chrome folder in the Firefox program folder.
You may need to (re)set the pref "general.useragent.locale" to the preferred language ("en-US") on the about:config page.<br />
You can open the about:config page via the location bar, like you open a web site.<br />
Use the Filter bar at the top of that page to quickly locate the pref.

Cr2 files won't open I have PS CC and the latest CR update available.

I have a Canon Rebel XS, a fairly old camera.
It writes a cr2 file and PS won't open it.
PS shows a link tat says update CR and I have the latest update available.
Running PS CC and have the latest update.
MBP OS 10.9.3 with the latest CR update.
Does anyone have an answer for this prob?
Thanks in advance!
R

cr2 files won't open I have PS CC and the latest CR update available.
I have posted a file on DropBox at: Dropbox - _MG_7302.CR2
Can anyone open it with DNG converter or Photoshop?
Neither of them work on mine.

HT201209 If I have redeemed my my gift and the balance is updated in the App Store and I still can not down load apps...what could the issue be? I keep getting this error message "Your Purchase Could Not Be Completed". Then it refers me to apple support.

If I have redeemed my my gift and the balance is updated in the App Store and I still can not down load apps...what could the issue be? I keep getting this error message "Your Purchase Could Not Be Completed". Then it refers me to apple support.

If you haven't already contacted iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I downloaded the os 6 by wifi and when the phone restarted it told me to plug into itunes. I did that and the iphone software update has been stuck on '70 hours remaining' for the last 3 hours. Help!

I downloaded the os 6 by wifi and when the phone restarted it told me to plug into itunes. I did that and the iphone software update has been stuck on '70 hours remaining' for the last 3 hours. Help!

it says " itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes" so i restore it and after it gets finished it says " the iphone :iphone" could not be restored. the device cannot be found" but ive used this itunes since i got this phone.

TS3999 I have a macbook Pro which had Mobileme. I have joined ICloud, but my Calendar does not sync. How do I fix this? I do not see an ICloud Icon on my laptop and the software is updated.

I have a macbook Pro which had Mobileme. I have joined ICloud, but my Calendar does not sync. How do I fix this? I do not see an ICloud Icon on my laptop and the software is updated.

This is the situation with Snow Leopard and existing iCloud accounts:
You will be able to access email and calendars on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
You will be able to enter the server settings for email manually in the Mail application and access your email.
You will not be able to sync your calendars directly.
Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point.
Address Book won't sync: this page has a convoluted hack to make it sync which has been reported as working (and as not working by others). I've not tried it.
There are a couple of alternative syncing services you might like to consider, though they're not particularly cheap:
Soho Organizer can sync Calendars and Contacts with iCloud on Leopard, Snow Leopard and Lion. A single user licence (multiple machines allowed) is $99.99.
Fruux syncs Calendars, Tasks and Contacts beetween a wide variety of devices (not using the iCloud server) including Snow Leopard and above, Windows Outlook and Thunderbird, Linux Thunderbird, and iOS and Android devices - see their compatibility chart (click the blue 'i' for a caveat about Snow Leopard). It's free for one user, two shares, two devices; above that pricing starts at €4 per month.
(I have no connection with these firms and have not tried Soho Organizer, though both have had good reports and I've found Fruux to work well.)

Will pictures worked on in LR5 (and the catalog) work in LR4 on another computer?

I just purchased LR 5 and discovered it requires Windows 7. My laptop has Vista Ultimate. If I install the LR5 on my main PC (Win 7), will work performed in LR5 and the catalog, transfer to LR4 OK?
If I perform work on other files (for another project) in LR4, then copy/transfer the catalog over to the computer with LR5, will the original LR5 files/project retain all of the LR5 data?
If data is lost transferring back and forth, then I will need to return LR5.

What you have to realize is that Lightroom is a software program designed to manage and process RAW files from Digital Cameras.
The software is in a period of rapid development so by the time a new version is available the previous version is obsolete for all entents and purposes.
With the competition in the market if you decide to remain with an earlier version you are actually making a decision to be content with using second rate processes to render your raw files. e.g. Lightroom V 1, 2 & 3 can be considered outdated.
Its different when using tiff and jpeg file technology which has been static for several years now.

Refresh buffer when rfc gets data from crm and the data was updated from R3

hi all
I have a program in r3 for maintenance of partners, so the user can create or update a CRM partner from the R3 system. if you are updating a partner, the program gets the data from CRM via RFC and saves the changes via zBDoc. if the user modify a partner and then try to check if the info were updated, he needs to leave the transaccion and run it again in order to the RFC gets the data updated. how I can avoid to leave the transaccion? i tried with a buffer refresh and commit but it doesn't works.... any idea?
tnks

Hi Alan,
THANK YOU for that hint. That brought me a giant step further, seriously! Many thanks! Now my report is running and hourly creating an instance, reeally nice!
But of course, the next problem is arising rapidly: Now that I got my report creating instances, the funny thing happening is the following: I created the WebI report with the WebI-Rich Client and then saved it to the server. In InfoView I scheduled the instance creation and the strange thing is now: The values differ. In the original report the values for some percentage ratios (e.g. 50%) show up as they should with four decimals: 0,5000 (German way of displaying numbers with decimals). BUT: In the instances of the same report, exactly these numbers would appear as 0,0000. So the numbers would just not be displayed! But all other numbers (all numbers not having decimals) would show up as they are supposed to even in the instances of the report.
This is kind of strange to me. Does anybody have a clue what the problem might be?
Many thanks again! And I hope I am not bothering you guys with these "newbie" questions.
Thanks and best regards,
Kai

KDE, aRts, and the recent flac update

Good morning,
I am running kde 3.3.1. No issues. I performed a pacman -Syu recently, and the flac package was updated.
At this point, I lost my sound, specifically aRts is not running in KDE. So KDE native apps that use aRts, such as noatun, and the KDE sounds that are specific to KDE events, do not work now.
The sound system (alsa) is still working though. Non-KDE apps generate sound perfectly, even when launched from within KDE. Last night I watched "The Day After Tomorrow" with xine, ...no sound issues. But KDE is voiceless.
Checked the obvious such as sound settings, mute, ran alsamixer in a console and verified that something wasn't muted, and verified that my default levels had not been misadjusted...
Thinking I had a system problem, I started gnome (2.8). It has it's own system sounds with no issues, so my problem appears to be KDE specific.
Any ideas anyone?
Dave..........

Gentlemen,
Sorry for being so late to chime but I've been busy trying to skull out XML all day and haven't had a chance to check the forum before this.
I did the upgrade last night but didn't notice the problem with the KDE system sounds till I read this thread (I'm now using XFce 95% of the time). Like the rest xmms and other sound apps work - just no system sounds. Everything else appears to running peachy...:)
Lee

Firefox 19 Beta and the Latest Acobat updates Broke PDF Printer

Details at Bugzilla: https://bugzilla.mozilla.org/show_bug.cgi?id=837369 (Not Responding Error)
In a netshell, in FF 19 beta I can only now create PDF's if I do it from the Print Preview Pane.
In the previous FF update prior to FF 19, PDF printing was sporatic, BUT I could usually print to PDF if after choosing the fiename to print to, and minimizing Firefox.
It appears that the Dialog "Creating Adobe PDF" is being blocked and hidden.

Yea, I know it does appear to be a hit or miss situation and, for me, mostly miss. The "Creating Adobe PDF" window gets really burried.
Sometimes it never, ever completes, but the document does. Other times it will appear just as you Kill Firefox. Somtimes the docuament names are even wrong.
In short, it's really messed up.
There is Firefox doing things, Windows doing things, Distiller doing things and they really all need to be on top, but not on top of each other. I think Firefox is monopolizing the desktop.
It's painfully obvious that the PDF prnter file dialog should come to the front automatically and it doesn;t. It hasn't for a while. Again, Firefox wins.
Notice that when you move some of the Adobe dialogs, the Firefox screen underneath leaves holes.

Display problems after installing 10.5.2 and the leopard graphics update

Shortly after installing the leopard graphics update, my display started exhibiting problems.
The next day, the powerbook wouldn't even boot, just leaving me at a blue screen.
I tried verifying permissions and verifying disk, reinstalling leopard and eventually did a fresh install of Tiger, which boots, but crashes frequently and has graphics corruption as visible in this screenshot:
http://pics.livejournal.com/dorukai/pic/000fw0hw
The same corruption is visible on a second monitor if I connect one.
The timing (being right after installing the graphics update) suggests that the update somehow caused this problem (flashing the video card firmware maybe?) but any ideas at all are very welcome at this point!
Unfortunately after installing Tiger I kept getting updates, and one has broken the ability to boot normally, I can only boot in safe mode

I have the same problem. It happened right after I installed the graphics update. When the computer restarted, my screen went crazy. I couldn't see anything, just a screen full of horizontal lines. After restarting a couple of times it seemed to go away, but it has begun to happen again recently. although not as bad yet. I am not saying it's not a logic board issue, but it does seem funny that more than one person is experiencing the same type of problem after the graphics update. I guess it's time to take a trip to the apple store.

Unmounted HDD and the latest Security update

Yesterday I installed the latest security/Java update and it crashed my system, just like it has done to quite a few other people: http://discussions.apple.com/thread.jspa?messageID=9053491#9053491
In trying to reinstall OS X, I ran across what I guess is the second installation disc error, where after the first disc is installed and the system reboots, it never finishes booting nor does it ask for the second disc.
I thought my problem might be a HDD error, so I ran the installation disc and did the Disk Utility. I asked it to repair the disc if needed. It could not complete the repair because of an "Invalid sibling link." And this is where things went really bad.
Foolishly, I searched the internet for "invalid siblining link" and found this site: http://www.macosxhints.com/article.php?story=20070204093925888
Which suggests that to fix this error you need to unmount your HDD and run fsck_hfs -r in the Terminal.
Why would I be so stupid as to follow this advice and unmount my HDD with little-to-no understanding of what unmounting does or of Terminal commands? Why would I not bother to read the comments following that post which decry the dangers of unmounting? The only excuse I can think of was that I was delirious after nearly 8 hours of trying to salvage my iMac from the Java/Security update. Needless to say, I successfully unmounted my HDD but did not successfully run the fsck test. Leaving me without a HDD and unable to install OS X.
At this point, I'm planning on taking to the Genius Bar in Austin over the weekend, hoping that they can salvage my new machine (less than a year old!) from the mess I/Apple made. Any one have any suggestions on remounting a HDD or any advice in general?

A wiser head may step in on this as regards to the mounting issue, but I am not currently under the impression that that is what is wrong. I think that command only applies when you are running the computer and once you turn off the computer and turn it on again the drive should appear in Disk Utility. In fact, if the drive were wiped clean your Disk Utility should see it. Yes, if you unmount it to run fsk, you then need to mount it to get it to show under that session, but if you turned off the computer or restarted it then all would be reset.
So, if you turn off your computer, boot from your install Disk and start up Disk Utility, does the drive show up at all? If so you're off the a start. If not then it is suggesting serious problems (terminal?) with the drive.

Installation failed (both iLife 11 and the latest software update)

Hi!
Today I tried to install the new iLife 11 and update my system again with the latest software update (including the Java fot Mac OS X 10.6 update 3 and ProKit Update). With both installations I get an error message during the installation.
I have no clue what it is about and how to solve it. I made some screenshots but can't seem to upload them here. The error message is in Dutch, so it might not be correctly translated. I get this error message with the update: 'None of the selected updates could be installed, an unexpected error/mistake has occurred'.
With the installation I also get an error while trying to install it. This occurs during the installation says it is configuring. After that is says that the installation has failed. 'During the installation some mistakes has occurred. Please start the installation again.'
I tried rebooting and repairing disc permissions etc.
How can this be solved?
Message was edited by: eriktiekstra

I have a little update...
During the software update it says the following: 'waiting until other installations are finished'
Thing is I am not installing anything. I have just rebooted the computer and only started Safari and the software update. That's it...
Anyone?

LR5 and the 5.4 Update

Similar Messages

Maybe you are looking for