LR5: Can't import 3FR

I can't import my .3FR-files from the Hasselblad H5D-50? Importing the .fff from Phocus works. These are not corrupt files since Phocus can handle them without issues.
I get this error after import.
The statement is that Lightroom 5.2 has support for the H5D-50 .3FR-files (Hasselblad RAW).
This is what I am running:
Mac OS X 10.8.5

Give us some details, like what happens when you try

Similar Messages

How can i import files to trial version LR5.6? Message:Your disk "MobileBackups", to which you are importing images, is low on space.

how can i import files to trial version LR5.6

I currently am up to about 65,000 images cataloged in LR. I backup on launch several times a week and have used the "relaunch and optimize" function periodically as well. I am a bit reluctant to do anything aggressive as, even though I have encountered this warning 6 or 7 times in the past 4-5 months or so I have never had to shut down. I have emptied the recycle bin (which, as I mentioned, usually has very little in it) and then I continue and notice no impairment of function. So at present it represents more of an annoyance and a bit of a mystery only. Maybe I will just report this to Adobe and sit tight unless someone can see an obvious explanation and correction here.
I appreciate all of the input and advice I have received already.

Lightroom 4.4 cannot import files exported from CaptureOne Pro8, but LR5 can??

I am a recent new user to PhaseOne's CaptureOne Pro8 software. I am using it for some RAW conversions, but still want to use my LR4.4 product to catalog, and further edit, those conversions.
I have tried exporting TIFF, DNG, and JPG from Pro8, but NONE of those files can be imported by LR4.4 I can selected the file, and then LR hangs on "Importing files...". Oddly enough, I can move to other LR modules, like Develop, and the software still works, but the import never completes.
I downloaded a trial LR5.6 via Creative Cloud, and that version of Lightroom imports the JPG files just fine. I have not tried to see if TIFF or DNG can be imported.
So my questions come down to :
Are there any LR4.4 users here who also have CaptureOne Pro8? Can you import Pro8-exported JPGs into LR4.4?
Is there any insight as to how LR5.6 handles files differently than LR4.4 that could explain why LR4.4 cannot load these files?
I have no other issues with any other software package that can read JPGs, only LR4.4. Keep in mind LR5.6 works fine, as well.
Hmmm?
Thanks for any help, insight,
Mike

BKKDon - Thank you so much for the Photoshop Family route. I kinda found myself going in circles on the Adobe support pages, and thought this user-to-user forum was my only option for LR4 support. Appreciate the link.
And, I believe you have helped me greatly narrow the problem down. I was not familiar with JFIF, and now I am. I was able to find some utilities to essentially strip all of the APP markers within the JFIF, and now I can import those files into LR4. I suspect that CO7 did not utilize APP marker in the JFIFs, CO8 does, and LR4 stumbles when it sees APP markers. That's speculation based on how I made the LR4 import work, and not by doing direct inspection of different JPGs or JFIFs. Thanks for the tip on JFIF, that gave me a lead that panned out.
Now if I could just figure out why DNG and TIFF seem to be similarly afflicted, LOL.
-Mike

Can't Import

Hello,
Problem: I can't import or synchronize images because they don't appear on the import screen. LR5 sees the card and the folders on the card, but not the images on the card. I have tried rebooting, reinstalling and copying the files to the hard drive with no effect. The images appear in LR4.
Here's a screenshot from the finder:
You can see there are a combination of raw and jpg files.
System:
Lightroom version: 5.4 [955652]
Operating system: Mac OS 10
Version: 10.9 [2]
Application architecture: x64
Logical processor count: 2
Processor speed: 2.8 GHz
Built-in memory: 4096.0 MB
Real memory available to Lightroom: 4096.0 MB
Real memory used by Lightroom: 728.3 MB (17.7%)
Virtual memory used by Lightroom: 2364.1 MB
Memory cache size: 680.9 MB
Maximum thread count used by Camera Raw: 2
Displays: 1) 1440x900

If you click on the Untitled Device (above left in your picture under Sources) instead of the Untitled Drive do they show up?

Can't import photos into light room

Have Lr5 won't let me import my raw photos in Lr5. Tried from HD, Flash Drive and from ex hd..

get the photos off of the card and reformat the card using the camera format command
Can you import the photos from disk once you have moved them from the camera to the disk? If not try opening one preview and saving as to create a new file and import that
LN

Lightroom 5.7.1 can't import NEF files!

Importing from an SDXC card - RAW photos shot today with Nikon D7000.
Recently changed to Mac Mini running OSX Yosemite 10.10.1 and Lightroom 5.
LR5 can "see" the images but when I try to import them I very quickly get a dialog box saying
Some import operations were not performed. The following files were not imported because they could not be read:

That error message is often misleading. Check your destination folder for the correct spelling and also check the destination folder for both read and write access at the OS level.

Need Help - Can't Import ANY Images into LR4.4 Since OS Upgrade

I can't import ANY images to LR 4.4 since upgrading my Mac OS to Mountain Lion 10.8.3 this past week. I downloaded LR5 Beta and all works well. I deleted LR5 Beta to see if it was conflicting with LR4.4 somehow and rebooted. Still no change. I can't import from my card reader (that says it can't even read the files) or from a location on my hard drive. I am beyond lost and frustrated.
The error message for importing is "Could not copy a file to requested location."
I need ideas. I am afraid to deleted and reinstall as I don't want to lose all my folders within. I looked all over the web and can't figure it out.
If you need any other info, please let me know. I am hopeful that someone can help me.

I added LR5 again and that works perfectly, but LR4 is still not working properly. I opened the preferences and catalog settings to compare...and they all look the same. I am beyond baffled. I don't plan on dropping more money for LR5, so I need LR4 to get back to working properly.

How can i import contacts from another AIM account to this new one

If you reference my last ichat question, you will see that I have had serious problems and had to create a new account.
How can I import contacts from another AIM account to this new one??

Hi,
Use AIM for Mac and use the Export and Import features.
Other than that it is a question on making sure every Single Buddy has more than just their Screen name in the IChat Address Card so it is added to the Address Book and dragging them back from there
9:08 PM Thursday; February 7, 2008

How can I import my old Appleworks spreadsheets into Neo Office or Pages

I am a new MBP owner and have some spreadsheets in Appleworks from my old iMac. I don't have Appleworks on my new MBP. I have downloaded Neo Office and could use it to create a new spreadsheet but can't import my previously created ones. Must I retype then? Or...as an alternative, I have iWorks. Can I import them into Pages? How? Thanks for any help.

The above suggestion didn't work for me. However, I did find this site that helped me--and it might help someone else:
http://neowiki.neooffice.org/index.php/OpeningAppleWorksdocuments
It worked for spreadsheet--now I have to try to convert a data base document in Appleworks.

Upgraded to 10.6.8 and now can't import photos from Olympus camera

1. Recently bought a new Olympus VR310 digital camera. I couldn't get either Image Capture (6.0.1) or iPhoto (9.1.5) to import images from day one, onto my Mac Mini running Snow Leopard 10.6.8. However, if I took the SDHC card out of the Olympus and put it into an older Canon Ixus digital camera , and used that to upload, then both Image Capture and iPhoto worked perfectly. So it's not the card. Or the USB connection. It's something special to the Olympus and the Mac. Obviously I tried all the usual stuff about dumping plist files etc. Nothing worked.
2. The problem manifests itself, when the Olympus is connected, as Image Capture being unable to show more than one, if any, thumbnails, and it is unable to import at all. In iPhoto the problem manifests immediately it calls up the Olympus as a connected camera. The dreaded spinning beachball of death kicks off, and the program 'stops responding'. Even after I quit iPhoto and unmount the Olympus, iPhoto will not open without the spinning ball of death until I restart.
3. Anyway, I tried connecting the Olympus to my son's Macbook, (System 10.6.7, Image Capture 6.0.1 and iPhoto 9.1.1) and all worked perfectly. Hmm… so it's NOT just down to the Olympus. It's something to do with my setup.
4. I also have a bootable USB drive connected to the Mini, so I booted into that, so I then have my computer and my user preferences etc running under the bootable drives System 10.6.6, Image Capture 6.0.1, and iPhoto 9.1.5. That worked perfectly with the Olympus too. So it's not my the combination of my user settings, Image Capture 6.0.1, or iPhoto 9.15, or the Olympus.
5. My guess then was it was some corruption of the system on the Mac Mini. So I reinstalled the Mac Mini system, from the install DVD, so I had a nice fresh Snow Leopard 10.6.0. That gave me Image Capture 6.0.1 and iPhoto 9.1.5. When I attached the Olympus, everything worked perfectly. Great.
THEN, I updated the system from Apple's Oftware Update, all the way to 10.6.8, which is where I started from.
6. And guess what. Nothing works anymore. Immediately before the update, the Olympus importing worked. Immediately afterwards it didn't. I'm back where I was at the beginning, with exactly the same problem.. I can't import from the Olympus but the Canon is fine. (see 1 and 2 above)
So, it seems to me that the Upgrade straight to 10.6.8 is what caused the problem. And given I could get the Olympus to work on my son's computer (system 10.6.6) it's something between 10.6.6 and 10.6.8. Why the Canon works on all the permutations, and not the Olympus, I don't know. I don't know why the Olympus ONLY doesn't work with 10.6.8.
7. Obviously there are tedious workarounds (but none that lets iPhoto capture the photos directly) which I can use to get the images into iPhoto eventually, but hey, this is an Apple Mac, who wants to be doing tedious workarounds all the time.
I've had Macs since 1984 (I'm that old…) so I'm a fan, and I'm reasonably competent, but this has me stumped.
Any ideas, anyone.
Any help much appreciated.
Ian Waterston

You launched iPhoto and from its Preferences you selected Connecting camera opens.....

Not enough space on my new SSD drive to import my data from time machine backup, how can I import my latest backup minus some big files?

I just got a new 256GB SSD drive for my mac, I want to import my data from time machine backup, but its larger than 256GB since it used to be on my old optical drive. How can I import my latest backup keeping out some big files on the external drive?

Hello Salemr,
When you restore from a Time Machine back up, you can tell it to not transfer folders like Desktop, Documents. Downloads, Movies, Music, Pictures and Public. Take a look at the article below for the steps to restore from your back up.
Move your data to a new Mac
http://support.apple.com/en-us/ht5872
Regards,
-Norm G.

After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow? Thank you, Filippo

On IMac 10.9 After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now? Anyone know? Thanks, Filippo

I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
Thanks

Can I import video from a Firewire camcorder using the Thunderbolt to Firewire Adapter?

I have an older camcorder that has a firewire interface. My new iMac does not have any firewire ports. Can I import video from the camcorder using a Thunderbolt to Firewire Adapter or is the Thunderbold adapter only used for hard drives and displays?

Rather than an adapter, I would suggest you purchase a 4 pin to 9 pin Firewire 800 cable to run from the camera to the Thunderbolt to Firewire adapter. Those FW 400 to 800 adapters frequently do not work so well for importing video in my experience.
The Firewire cables are pretty inexpensive if you get them online. For example try Monoprice.
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030104 &p_id=3541&seq=1&format=2

Can't import tracks from an older version of iTunes

Since my rMBP has no optical drive I've found a practical use for my old G3 iMac which is for ripping CDs.
The G3 of course is only running iTunes 7.6 (the newest version available for G3 Macs) whereas my MBP is running the latest version.
I've shared the iTunes Library on the G3 and can access it on my MBP, and can even play tracks, but there is no Import button at the bottom of the window so I can't import the ripped tracks into my MBP iTunes. This works fine if I use my wife's MBP (my old one) which is also running the latest version of iTunes.
Have I missed a setting on the G3, or is this a limitation due to the big difference in iTunes versions?
I'm ripping to Apple Lossless if that matters.

Limnos wrote:
How did you share this library? If you're talking about what iTunes has, there is a difference between Home Sharing which is a feature of newer iTunes and enable copying fo files, and plain music sharing which older iTunes had but only allowed music to be played.
Ah, thanks, that will be it.
Guess that means I can't use my G3 for doing this. Oh well, not to worry.
Limnos wrote:
You say, "This works fine," but "this" is vague. Do you mean Home Sharing from your wife's Mac to yours? If so, then yes it will work because they are both capable of Home Sharing.
Yes, "this" meant importing tracks from the Library on my wife's MBP
Limnos wrote:
iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
Thanks for the link

Can't import P2 Footage after 5.1.2 update

This one has me stumped. After updating to 5.1.2 I can not import P2 footage.
When I click on the import Panasonic P2 tab under the import menu, nothing happens. Then, I click on it one more time and the import window loads but there is nothing there (I see the dividing lines but there is no text or buttons to click...just a solid grey background).
Tried the usual...trashed prefs, rebuilt permissions, downloaded the full FCP update off of the apple website and re-installed.
Also pulled all my plug-ins out just in case it was somehow related to that issue.
Still nothing.
Also, searched this form, creative cow and HVXUSER...no one else seems to have this issue.
Any thing I am missing?
- Chad
Dual 2 Gig G5 Mac OS X (10.4.8)

Same problem here on two different G5 machines after installing 5.1.2. Love the new import tool - but 10-20% of our clips just won't import anymore. Done all the recommended clean-ups and like many others on this forum and CreativeCow...it just won't work on some 24PN clips.
Getting desperate as we have daily shows that go out and need to get the rest of those clips in so I'm looking for any workarounds at this point and hoping Apple has a fix soon. This is clearly related to 5.1.2 as the same clips were previously imported in 5.1.1 and are readable in the P2 viewer and even playable in the 5.1.2 P2 import window.

LR5: Can't import 3FR

Similar Messages

Maybe you are looking for