LR5 Develop Module, Tone Curve gone missing.
Hi can anyone suggest how I can get the Tone Curve back. I've done all the usual checks. One day it was there and the next it was gone.
I'm using a MacBook Air. (no problem with LR5 on my MBP)
Did you ctrl-click section header bar, e.g.
Similar Messages
-
Red splotches on photos in LR5 Develop Module
I get red and blue splotches on photos in LR5 Develop Module. Seems to be mainly in bright areas of photos. Not there in Library module. I noticed this in the Beta as well but thought it would be fixed before release. In LR4.4 everything is fine.
Turn the clipping indicators off in the Histogram in the develop module. The are the little triangles in the upper left and right corners of the histogram.
-
Tone Curve adjustments Missing
The tone curve adjustments are missing in my copy of lightroom 3
That section of the develop tools resided near the top of the right hand panel.until about 1/2 hour ago. Its now missing
What has happened?The graph and sliders are not displaying, I can find nothing to check
-
LR5 not showing Tone Curve "region" panel and associated sliders.
Hi,
The Tone Curve panel in LR5 as currently set up isn't showing the "Region" sub-panel and associated sliders. It also isn't showing the slider immediately under the tone curve itself. Any ideas on how to get these features to show?
ThanksHi Jao,
Bingo! That did the trick. Many thanks.
Ian -
Tone Curve sliders missing?
I have LR 3.2 and today I noticed that the region sliders in the tone curve panel are gone.
Has anyone else experienced this?
WayneThanks Rich.,
That did it.
Wayne -
Basic develop tab has disappeared in Develop module
I'm stuck, I can't process any images as the basic tab has suddenly vanished. Anyone had this and how can I get it back?
If you right-click on any of the other section headers in the develop module (tone curve, etc.) it will present you with a list of all the different sections. Make sure there is a checkmark in the Basic checkbox. It seems that several others have encountered this problem when moving to Lightroom 5. It isn't something I have had trouble with.
-
Lens correction feature completely missing from Develop Module
The lens correction feature has gone missing from the Development Module. It was missing before I upgraded to 5.6 and is still missing. Previously, it was present, so I am wondering if I did anything to hide or remove it?
Right-click on one of the other section headings, such as Tone Curve, Basic, etc. Make sure there is a checkmark in lens corrections. This is how you control which develop features you want displayed on your system. Sometimes features disappear mysteriously.
-
Lightroom 5 Develop Module Not Responding
The LR5 develop module will flash not responding after about 5 minutes of use. I have to shut down LR and restart it to get it to respond, but it gets kind of old having to do it every 5 minutes. Photoshop CS6 had the same issue with ATI drivers and, as far as I know, that issue has not been resolved. The workaround was to turn off hardware rendering, but there is no option, that I can find, in LR to do that. Anyone else experiencing the same issue? Any temporary solutions other than dropping ATI altogether?
System Info:
OS Name
Microsoft Windows 7 Home Premium
Version
6.1.7601 Service Pack 1 Build 7601
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JOHN-PC
System Manufacturer
Gigabyte Technology Co., Ltd.
System Model
GA-880GA-UD3H
System Type
x64-based PC
Processor
AMD Phenom(tm) II X6 1055T Processor, 2800 Mhz, 6 Core(s), 6 Logical Processor(s)
BIOS Version/Date
Award Software International, Inc. F7, 11/24/2010
SMBIOS Version
2.4
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume1
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
User Name
John-PC\John
Time Zone
Eastern Daylight Time
Installed Physical Memory (RAM)
16.0 GB
Total Physical Memory
16.0 GB
Available Physical Memory
12.4 GB
Total Virtual Memory
32.0 GB
Available Virtual Memory
28.3 GB
Page File Space
16.0 GB
Page File
C:\pagefile.sys
Video
Adapter Type
AMD Radeon Graphics Processor (0x68D9), Advanced Micro Devices, Inc. compatible
Adapter Description
ATI Radeon HD 5570
Adapter RAM
1.00 GB (1,073,741,824 bytes)
Installed Drivers
aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dl l,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version
12.104.0.0If lightroom downloaded and installed without any errors, you will get better help with program questions in the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/lightroom -
Missing Basic and Tone Curve Panel in LR5
Last night I installed LR5 (last version was LR3) on my iMac with Mavericks OS and everything was working fine, I thought, and I was using the Develop Module when I noticed the Basic Panel and Tone Curve Panel (which I had been using) had gone missing . As in, poof, they were gone. So now I have the Histogram, the Crop and other tools and brushes, and then nothing until HSL/Color/B&W and then on down.
I'm cheating here with another question, but I think it will be quick: I see LR5 automatically uses the updated interface for Highlights, Shadows, Blacks, Whites and I see they are more precise and subtle. Can I go to photos adjusted in LR3 that still show the LR3 interface and use the LR5 interface & finer adjustments on the old photos?
-
LR 2.7 bug: Tone Curve is ignored in Develop module during loading
I have found a problem that occurs after upgrading from 2.6 to 2.7. It probably wasn't existent before, but now I am not sure.
What happens is this: After making a Tone Curve changes to a series of photograps, I stayed in the Develop module and looked at the next/previous photos and this happens during every change:
1) current photo is displayed
2) I click on another photo
3) The new photo is displayed and "Loading..." message appears
4) [After about 0.5 sec.] The new photo darkens (more precisely: Same view as without the Tone Curve adjusments)
5) [After another 1 sec.] The new pohto lightens up again (Tone Curve is applied correctly) and "Loading..." message disappears
This prevents from comparing brigness of photographs directly in the Develop module In the Library module, this problem doesn't happen.Hi Dan,
OK, so now I'm confused... I have removed the profiles for the monitors (one for each) and now use the manufacturer supplied one and haven't been able to get a crash since yesterday when I did the change. I'm not 100% confident the bug has gone, but it's passed my "it should happen by now" criteria. I'm wondering if the size of the .icc profiles could have an influence. When I calibrate my monitors, I always do a full calibration which stores the data as a full LUT iccview.de lists it as:
Description Tag:
Monitor_2_17-03-2011
ICC-Tag: BToA1 (Colorimetric)
Calculation: LUT with 35937 grid points
Header:
size = 690296 bytes
CMM = 'APPL'
Version = 2.4.0
Device Class = Display
Color Space = RGB
Conn. Space = XYZ
Date, Time = 17 Mar 2011, 15:50:32
Platform = Microsoft
Flags = Not Embedded Profile, Use anywhere
Dev. Mnfctr. = 0x0
Dev. Model = 0x0
Dev. Attrbts = Reflective, Glossy
Rndrng Intnt = Perceptual
Illuminant = 0, 1, 0 [Lab 100, 0, -0]
Creator = 'LOGO'
Total volume of gamut is 885574 cubic colorspace units
The profile I have moved to and which seems to be working is a much smaller matrix profile. iccview.de says:
Description Tag:
DELL U2410 Color Profile,D6500
ICC-Tag: XYZ Matrix
Calculation: 3x3 Matrix
Header:
size = 6756 bytes
CMM = 'ADBE'
Version = 2.0.0
Device Class = Display
Color Space = RGB
Conn. Space = XYZ
Date, Time = 1 Mar 2010, 14:15:19
Platform = Microsoft
Flags = Not Embedded Profile, Use anywhere
Dev. Mnfctr. = 'DELL'
Dev. Model = 0x534654
Dev. Attrbts = Reflective, Glossy
Rndrng Intnt = Perceptual
Illuminant = 0, 1, 0 [Lab 100, 0, -0]
Creator = 'DELL'
Total volume of gamut is 1401609 cubic colorspace units
So, assuming I get no more crashes, how do you want to debug this further? Do you want my icc profiles? -
How can I retrieve the "Basic" menu on Lightroom 5? I accidentally bumped something while working in the Develop module of Lightroom 5, and now the Tone Curve menu is directly under the Tool Bar, with no option to click on "Basic."
Right-click on Tone Curve and choose basic again or press Ctrl+1 in Develop.
On Mac (Control-Click or Cmd+1) -
I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel. My Basic panel should be below the Histogram. Any ideas how to get it back. I have even uninstalled my lightroom and reinstalled it with same issue. Help!!!
Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.
-
Quick Develop Module Missing in LR5?
Hello,
I am using LR5 and my Quick Develop Module is missing. My photos are online and so this is not the problem. I rebooted but still no Quick Develop Module. I can use the other modules. Please help?Quick Develop is in the Library Module, not the Develop Module (where it has always been).
If you don't see it in the Library Module, then you need to right-click on any right-panel header (like Keyword List) and select Quick Develop -
How do you fix the missing Detail panel in the Develop module? I just updated on the Mac to LR 5.4.
Right-click on any RH panel header in Develop and put a check mark next to the Detail panel
-
I have contacted Adobe support, they proposed to delete the preferences, but did not work, then to have a new user and try it from there. With the new user I got the complete menu, but have no access to my catalog and photo database.
Has anyone an idea how to solve the problem. ??????Go back to your version of LR without the "Basic" menu.
Right click (or Cmd Click) on one of the other headings in the Develop Side bar (eg: "Tone Curve"). Then re-select the "Basic" box from the pop-up menu that appears.
Maybe you are looking for
-
ERROR MESSAGE WHEN TRYING TO SAVE A DOCUMENT IN WORD
I'm trying to save changes to a document in word but I keep getting an error message telling me that it can't save it due tofile permission error. Can anyone help I really need this document.
-
Black and white selective coloring with brushes disappeared
The down and dirty: Upgraded to Aperture 3.1.1 Aperture then updated my library I open a file that I have selectively colored with black and white (a track and field runner and her lane is color, the field is black and white) and to my horror the thu
-
Databases in Recovery Pending state
Dear all, Need your expertise to understand bit more. Yesterday i came across databases in "Recovery Pending" state problem. Followed too many recommendations form Google but to no avail. e.g. http://dbamohsin.wordpress.com/2012/01/23/cannot-detach-
-
Object Libraries and Subclassing
I am trying to use an object library to store standard objects for re-use. Every time I try to use these objects the message 'Frm - 18108 , failed to load objects' appears. The object library is in the same directory as the form. Even if I use a 'Sma
-
im trying to cancel some unwanted subscriptions and have followed the adviice I've found, but the ON/OFF slider!is not showing alongside the auto renewal button o I'm unable to switch it off. How do I change this?