LR5 exporting issues

I am currently running Windows 8.1 on a brand new computer with a 2GB ASUS NVIDIA GEFORCE GT 640 video/graphics card 4GB ram memory and 1 TB of HDD space and LR5 wont allow me to export more than 1 image at a time. I just upgraded to the Photoshop cc and LR5 promo last week and have had nothing but issues exporting files. Keeps telling me not enough memory and when I check the Task Manager LR5 is the only thing running. Am I the only one this is happening to??? I am considering going to 64 bit to add more memory but not sure that is the issue being that I am meeting and exceeding all requirements for LR5.

I am exporting from RAW to jpg. Raw files are 20-25mb each and the final jpg after exporting is 9-11mb. I have 8gb of memory but since I am running 32bit it only sees 3.48gb How come we can't change LR settings like below?? It is showing on my system that LR maxs out at 716mb of the 3480mb that I have and runs at approx 540mb and exceeds it quite often
If you use Photoshop with Lightroom, check Photoshop's RAM setting
See the Max Out on RAM and Memory Usage sections in this TechNote to determine the best RAM settings for your computer. To change your memory settings in Photoshop, choose Apple > Preferences > Performance (Mac OS) or Edit > Preferences > Performance (Windows).

Similar Messages

Bizzare export issue

Here is a very weird export issue. Windows XP.
Project is set at h264 1920x1080 mono audio 29.97 fps
I have 30 shots that make up the sequence. Each shot is exactly 90 frames. I exported each sequence at h264 1920x1080 with one channel of audio. The first shot exports just fine and is 5 MB. The second shot exports at 10 MB. The third is 15 MB, the tenth shot is 50MB. But the picture is still 90 frames for each shot. BUT, when I export without audio each exported file is just 5 MB. If I look at the properties of each clip the duration of the video and audio is just 90 frames. If I open one of these clips in QuickTime Pro and re-export it as source then the files size goes back to 5 MB; same video, same audio yet with the correct file size.
Anyone seen this before?
Is there a setting that could be incorrect?
-cablet

Weird, man. Not sure what might cause that.

Crystal JRC PDF Export Issue

We are experiencing a PDF export issue with Crystal JRC version 12.2.202. The PDF report shows 1 of 3 pages but ONLY the first page is generated. When this occurs, ALL other users that are exporting to PDF experience the same issue with any multiple page report. I can't find any errors in the log that would indicate what the problem is. To resolve the issue, I have to recycle the WebLogic application server that hosts the JRC, which would indicate something gets "locked" in memory and gets cleared when the app server is bounced.
Any ideas on how to resolve this ?

Hi Ted,
Thanks for the response!
Though, the mentioned Sun JVM Bug explains the root-cause, the Bug status also state that it is not fixed yet.
Also, we are reluctant to change the JVM Option to -Xint due to unknown impacts on JVM optimizations.
Is there a patch released for CrystalReports to deal with this behavior? We are using CRJ runtime 11.5.7.620 and seeking for a patch on this version.
Thanks.

PP CS5.5 FLV To MP4 Export Issues / Problems

I just upgraded from Production Premium CS5 to CS5.5. I do a fair amount of converting/exporting of imported FLV files (downloaded from internet news sites) to H.264/AAC w/ MP4 wrappers using Premiere Pro (PP) and Adobe Media Encoder (AME). My equipment is a 1+ yr. old HP Win 7 Pro w/ an Intel i970 Quadcore, 12 Gb RAM and MSI nVidia GTX 470 GPU. I have never experienced any queue or export issues w/ CS5 (at least that I noticed), but I am experiencing noticeably degraded queue export and direct export problems with these files in CS5.5.
Description: (1) The queue export times for the exact same imported FLV clip(s) using the exact same sequence settings and H.264/MP4 export settings are noticeably slower in CS5.5 (sometimes 2x, depending on the export settings, e.g. using maximum render quality) than in CS5; (2) My MSI Afterburner GPU monitoring software indicates 5-10% GPU usage during queue/export in CS5, while indicating 0% GPU usage (flatline) in CS5.5; and (3) When I attempt to direct export these files using CS5.5 I get the following error message: "The source and output audio channels are not compatible or a conversion does not exist."
I suspect that it may have something to do with "conforming" anomalies when the FLV file is imported into PP, but I would put that squarely in the category of rank speculation on my part.
Has anyone experienced the same or similar problems or have any insight into what may be the problem(s)? Of course, thanks for any help/insight you can provide.
Jim

What do you mean by a better routine?
A better compression routine than H.264.
Is the quality better than H.264?
Yes.
Does this use an MOV wrapper?
Yes.
Also, would it import correctly into PPro?
Yes.
we would import files into PPro exported out of FCP and would get a red pixelated glitch during preview and export. Does this codec solve this problem as well if it is an MOV wrapper?
I don't know anything about FCP.
Sorry for all the questions, just want to get things right before diving into a new codec.
It's harmless, and free.
Download it and run some tests.

Simple flash export issue

hello
I'm trying to export a flash video using Adobe media encoder from Premier Pro, but when I do I get this error " there are no clips to build".
I have another file that I am able to export and it does not have this problem.
They are Windows Media files and play in Premier fine. I am using Premier Pro CS3.
Lastly, I'm not a video expert but I really need to get these up on the web for work, there is a lot of pressure and I need to get it done.
Regards,
Tom

fixed the exporting issue.

Exporting ISSUES! Help

I am a relatively new user to lightroom. I haven't had any exporting issues until today. I am attempting to export a photo/photos to a specific folder with a custom name. When I do this it exports the WHOLE library and NOT the edited photo. What am I doing wrong??

Lightroom usually exports all images that are highlighted. If you only want to export one image then make sure it is the only image that is highlighted.

Exporting issues after 4.2 upgrade

Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

Are you using an Export preset, or setting the Export up manually each time?

Reporting Export Issue from Taleo

Can anyone help? We have a work around for the Exporting Issues into Excel 2010 regarding figures and dates only reading as text, however, a new issue has arisen. In one field we have Aggregated Agencies assigned to any particular Job Code. In the legacy reports, every agency name exported into one cell in Excel, now they export into individual rows, this causes a report to be too long and there is no way to amalgamate them into one cell. Has anyone found a workaround for this?

is there someway that it was reformatted by the Iomega drive being daisy chained to it?
No. That is not possible -anyway, reformatting erases everything on a drive.
You would have noticed that first.
You can download the [NTFS-3G driver|http://macntfs-3g.blogspot.com> which will let you read, write and even reformat the clients drive as NTFS on the Mac. All reasonably modern Windows PCs work with this disc format and you won't run into the file size limitations associated with FAT formatted drives.

Using 128bit key Blowfish and any export issues

Hi,
I want to use blowfish (symmetric key algorithm) in my product and which will be shipped outside US. Reading Sun's documentation I am bit confused and I am not sure if the jce package is going to be available outside the US.
Has anyone used the default available symmetric key algorithms in the JCE package (javax.crypto.*) and faced any export control issues ?
Please let me know.
Thanks
RT
Here is a sample code
String ks = "123456789123456";
kb = ks.getBytes();
SecretKeySpec key = new SecretKeySpec(kb,"blowfish");
Cipher cipher = Cipher.getInstance("blowfish");
// Initialisation of cipher object for Encryption.
cipher.init(Cipher.ENCRYPT_MODE, key);

1. the issue is rather an import issue for some countries, than an export issue for US as far as you use jre>=1.4 .
you can read the
'Downloading the "Unlimited Strength" Jurisdiction Policy Files'
section of
http://java.sun.com/products/jce/javase.html
2. The restricted (defualt) shipped version already covers Blowfish if you mind that.
3. I use Blowfish with restricted (default) version of JCE in applications deployed in europe and have not heard of customer complaining sofar: they are supposed to use webstart or jre1.5.

LR5.3 Export issue with Sequence Renumbering

I just discovered an issue with the LR5.3 Export module on my Windows 7 system when exporting JPEG image files with 'Sequence' File renaming and 'Original' File Settings to a subfolder. When exporting approximately 100 JPEG image files LR shows a file count in the subfolder of ~1/2 the actual file count and the ability to 'Synchronize Folder' disappears. The correct number of files appear in the subfolder using Windows Explorer, so they all were successfully exported and renamed properly. LR must be closed and reopened to restore the ability to 'Synchronize Folders' and/or 'Import' images using the Import module. I've never encountered this problem before since I normally process raw image files, which do not exhibit this issue.
Here are screenshots:

Posted to the Photoshop Family site as a problem:
http://feedback.photoshop.com/photoshop_family/topics/lr5_3_export_sequence_numbering_issu e

LR5 Slideshow export issue - small images

I've been having quite the difficulty exporting 1080p slideshows from Lightroom 5. After exporting to a 1080p slideshow, some images will fill the screen correctly, while others appear much smaller. I rendered full 1:1 previews to try and fix it but that didnt help. Im at a total loss. Has anyone else experienced this and/or know of a solution?
The first image is one that exports correctly, while the second is whats happening with the other smaller ones.

If you Zoom to Fill the Frame you risk loosing part of your image (the Slideshow module works in a similar way to the print module but doesn't allow you to maximise space).
This slide is Zoomed to Fill Frame (and is wrong)
This slide is not Zoomed to Fill Frame (and is right, the full photo is shown, the derelict road marker is visible and the whole sky is visible)
endeguia wrote:
I've made a slideshow using a white background, zoomed to fill frame and used identity plates. It turned out exactly how I needed it to be. Now I'm making a second slideshow using all the same intro and ending screens and identity plates but with different pictures (same size as the first slideshow) and it's not the right size when exported. I feel like there is some sort of glich happening...
Are you a 100% sure you are using the same settings and the exactly the same version of LR (2 slideshows with LR5.7 for example and the same settings)?

Export issues from LR5.3 to CS6

Since LR5.3 update I cannot export my Photos from lightroom to CS6 directly and the edit box iln LR doesn't appear anymore when performing this task?

Hi Geoff,
Many thanks for your tip. Indeed, moving the preference file to the desktop now solves the problem!
Would you mind explaining why this works? And what I need to do with the preference file sitting on my desktop?
So I can get a deeper understanding.
Many thanks again.
René

LR 5 Slideshow Video Export Issue

I've created a slideshow where all of the photos display properly within Lightroom's slideshow module. But when I export the slideshow to video (this doesn't happen for the pdf export), a few of my photos are rendered on screen at very low resolution/fuzzy. This only happens to a few of the photos and these same photos look fine if viewed within the LR slideshow module. It's just after export that a few of the photos get rendered at low resolution; all other photos in the slideshow are fine. Reading some posts, i tried deleting the previews for all of the photos and then re-rendering them at 1:1 and then trying the export again, but i get the same outcome...although this time, different photos were rendered at low resolution. Is this some kind of bug or have i failed to set a setting properly?

I can duplicate the issue of some landscape images appearing very soft in the MP4 slideshow video on my Windows 7 LR5.3 system.
To rule out issues I started by selecting all of the image files to be used in the Library module. Then I selected toolbar Library> Previews> Discard 1:1 previews. Next I selected Library> Previews> Build 1:1 Previews and then created the slideshow video again. None of the images appeared soft in the 1080p video created from Canon 5D MKII video files. In fact the results actually appear better than LR4.
If this doesn't resolve your issue please provide image file types you are using (Camera model, raw, JPEG, resolution), Slideshow video preset you are using (1080p, 720p etc.), and your Catalog Settings> File Handling> Standard Preview Size (2048, 1680, etc.).

Any fixes for LR5 export error message 'Not enough memory'?

I have plenty of hard disk space, and the files being exported are only 10MB each. I'm exporting from PEF raw files to jpg's. Closing and restarting LR5 fixes the issue after two or three goes, but it's getting annoying. Anyone know of this issue?

Don't be tempted to just upgrade your RAM, as Windows 7 32 Bit is unable to utilize more than the 4 GB you already have installed. If costs are an issue upgrade your OS to Windows 7 (or higher) 64 bit first, then upgrade to 8GB of RAM if/when required.
I have Lightroom 5.4 installed on two Windows 7 64 bit desktops, one with 4GB of RAM installed and the other with 8GB. I have never experienced a 'not enough memory' error with either, although performance is significantly better on the 8GB system.

Animated GIF Export issues

I have a simple Flash animation which I'd like to be made
into a transparent GIF.
When I do the GIF export, only the first frame of my
movieclips (which are placed in the main timeline) get rendered. It
seems like Flash only records the main timeline preview output into
the GIF file, and does not play movieclip objects. You would expect
the GIF recording to be of the same preview as when you hit
ctrl+enter (essentially final playback).
Because of this, the GIF export is pointless. The only way to
use it is to have all your animations occur in the main timeline,
and not within movieclips. It doesn't work for me (and for most
people?), because I need to easily scale my animations, which is
doable by just resizing a movieclip.
Is there a way around this in Flash? Am I missing something?
I've had to use a 3rd-party tool (Magic SWF2GIF) to do the
GIF recording.
My other issue is Flash cannot export transparent GIF's it
seems. Because of this, I have to rely on more 3rd-party GIF tools,
most of which are rubbish.
In the end, I've had to take snap shots of every individual
frame and edit each frame as individual files in Photoshop to do
all the cropping and transparency just right. Real pain when you
are talking 50 frames, and having to do multiple animations.
Is there a way to export transparent GIF's in Flash?
Seems kind of dumb that I have all this high-end software and
loads of tools... and I still have to edit things frame by
frame.

Thank you for your reply!
I check exported GIFs in various browsers and XnView viewer.
It's definitely not a preview issue - i have 32Gb of RAM and Nvidia Quadro 4000 GPU on my system.
I believe the issue is with transparency, because i'm able to export GIFs with solid background just fine
GIF export dialogue window has 'Transparency' checkbox, so it looks like it should be possible to export an animated GIF with transparent background, but for some reason i'm getting all frames at the same time
thank you

LR5 exporting issues

Similar Messages

Maybe you are looking for