LR5 Import dialog does not list any images

Lightroom 5 is not seeing that a folder of images I'm trying to import has any images in it. The folder is question has well over 5,000 jpegs (it's my iPhone image depository). While I was able to import images from this folder with no problem in LR4, LR5 is telling me that there are no images in the folder. I've double checked that all my import settings are normal and the same as LR4 and it doens't matter. No matter what I do, I cannot get LR5 to see that there are any images in this folder to import.
Any thoughts?
Thanks,
Antonio
Here's an image of what's happening:
Message title was edited by: Brett N

"If the folder already exists in the Folder panel, select it and Choose Library > Synchronize Folder."
It doesn't exist in the Folder panel. It never has. It would mess up my workflow to have it as such. I only import from this folder.
Try (via finder) moving a few of the images in the folder to another folder that has been cataloged. Then synchronize that folder to see if the images show.
I did this and the images showed up fine, so there is nothing wrong with the image files.
Instead of invoking the Import Dialog first, drag an image from th Camera Roll folder onto the Library module or the Lr icon. That will bring up the import dialog. see if you get the same results.
Did this and it did not work.
Why this is strange is that I have no problem importing from the same folder in Lightroom 4. Something has changed here in LR5.
Here's another image of what is happening:
https://www.evernote.com/shard/s1/sh/e6199117-5f68-4a75-9faa-2f94220f8f18/2a633375d4c394fb 7e3ebd19c573eda4/deep/0/Screenshot%206/13/13%203:53%20PM.jpg

Similar Messages

My top and under folder does not list any images

Suddenly, my top and under folder does not list any images ?
For exemple : lightrom 0 /2013 0 /2013-05-11 126
LR5 ; I run windows 8 64bits
Thanks for your help.
Best regard
Regis

Library Menu, select "Show Photos in Subfolders".

Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

Recovery Disc Creator does not list any discs for creation

Brand new NB200-10G (this a UK model). When I run TOSHIBA Recovery Disc Creator it does not show any discs for creation and the CREATE option is greyed out so I cannot create the discs. Now... when I first got it I did not have a USB DVD writer with me but I ran RDC out of curiosity to see the devices it might offer. At that time it DID list discs to be created but I cancelled out. I get the impression the program thinks it has created the discs and I believe I read somewhere that it will not create the discs more than once. I think it must have set a switch in the registry or .ini files somewhere to indicate that the discs have been created. If so does anyone know how to "undo" this? Drive D (data) and hidden partition *appear* to be intact.
If this is not possible then I guess I could try the "press key 0 at power up" method to restore to original install setting and this might then enable me to create the discs but I'm concerned that if the restore fails in a destructive way that I might be left without a working PC. TIA Ken
Solved!
Go to Solution.

OK all fixed!
Restore using key 0 at power up worked fine and cured the ToRDC problem. It then let me produce 2 copies of the restore DVD. Don't know what caused the problem... issue CLOSED.
Ken

Dreamweaver does not link any images or styling to my webpage

Hi,
I have been creating a webpage and have moved images from one folder to another and now the website will not display any images or styling. I have moved all the content back and it still doesn't show. I have created a completely new website with new images and styling and even now it still doesn't link the images to the "live view" (or when I open it in a browser). What have I messed up?
Thanks in advance.
Tom.

Thanks for you quick response - Please note that even if I use a template it doesn't show any image I put in. Can you see a problem with this template code? I have put the HTML and then the CSS after
PLEASE ALSO NOTE: I have completely re-done site management and moved images to where they should be. This has not worked.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Untitled Document</title>



<link href="file:///C|/Users/admin/Desktop/tomstinhouse/twoColElsRtHdr.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColElsRtHdr">
<div id="container">
<div id="header">
    <h1>Header</h1>
</div>
<div id="sidebar1">
    <h3>sidebar1 Content</h3>
    <p>The background color on this div will only show for the length of the content. If you'd like a dividing line instead, place a border on the right side of the #mainContent div if the #mainContent div will always contain more content than the #sidebar1 div. </p>
    <p>Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut, sapien. </p>
</div>
<div id="mainContent">
    <h1> Main Content </h1>
    <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. </p>
    <p>Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio. Donec et ipsum et sapien vehicula nonummy. Suspendisse potenti. Fusce varius urna id quam. Sed neque mi, varius eget, tincidunt nec, suscipit id, libero. In eget purus. Vestibulum ut nisl. Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut, sapien. Fusce metus mi, eleifend sollicitudin, molestie id, varius et, nibh. Donec nec libero.</p>
    <h2>H2 level heading </h2>
    <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio.</p>
</div>
<br class="clearfloat" />
   <div id="footer">
    <p>Footer</p>
</div>
</div>
</body>
</html>
@charset "utf-8";
body {
font: 100% Verdana, Arial, Helvetica, sans-serif;
background: #666666;
margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
padding: 0;
text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
color: #000000;
/* Tips for Elastic layouts
1. Since the elastic layouts overall sizing is based on the user's default fonts size, they are more unpredictable. Used correctly, they are also more accessible for those that need larger fonts size since the line length remains proportionate.
2. Sizing of divs in this layout are based on the 100% font size in the body element. If you decrease the text size overall by using a font-size: 80% on the body element or the #container, remember that the entire layout will downsize proportionately. You may want to increase the widths of the various divs to compensate for this.
3. If font sizing is changed in differing amounts on each div instead of on the overall design (ie: #sidebar1 is given a 70% font size and #mainContent is given an 85% font size), this will proportionately change each of the divs overall size. You may want to adjust based on your final font sizing.
.twoColElsRtHdr #container {
width: 46em; /* this width will create a container that will fit in an 800px browser window if text is left at browser default font sizes */
background: #FFFFFF;
margin: 0 auto; /* the auto margins (in conjunction with a width) center the page */
border: 1px solid #000000;
text-align: left; /* this overrides the text-align: center on the body element. */
.twoColElsRtHdr #header {
background: #DDDDDD;
padding: 0 10px; /* this padding matches the left alignment of the elements in the divs that appear beneath it. If an image is used in the #header instead of text, you may want to remove the padding. */
.twoColElsRtHdr #header h1 {
margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
padding: 10px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
/* Tips for sidebar1:
1. Be aware that if you set a font-size value on this div, the overall width of the div will be adjusted accordingly.
2. Since we are working in ems, it's best not to use padding on the sidebar itself. It will be added to the width for standards compliant browsers creating an unknown actual width.
3. Space between the side of the div and the elements within it can be created by placing a left and right margin on those elements as seen in the ".twoColElsRtHdr #sidebar1 p" rule.
.twoColElsRtHdr #sidebar1 {
float: right;
width: 12em; /* since this element is floated, a width must be given */
background: #EBEBEB; /* the background color will be displayed for the length of the content in the column, but no further */
padding: 15px 0; /* top and bottom padding create visual space within this div */
.twoColElsRtHdr #sidebar1 h3, .twoColElsRtHdr #sidebar1 p {
margin-left: 10px; /* the left and right margin should be given to every element that will be placed in the side columns */
margin-right: 10px;
/* Tips for mainContent:
1. If you give this #mainContent div a font-size value different than the #sidebar1 div, the margins of the #mainContent div will be based on its font-size and the width of the #sidebar1 div will be based on its font-size. You may wish to adjust the values of these divs.
2. The space between the mainContent and sidebar1 is created with the left margin on the mainContent div. No matter how much content the sidebar1 div contains, the column space will remain. You can remove this left margin if you want the #mainContent div's text to fill the #sidebar1 space when the content in #sidebar1 ends.
3. To avoid float drop, you may need to test to determine the approximate maximum image/element size since this layout is based on the user's font sizing combined with the values you set. However, if the user has their browser font size set lower than normal, less space will be available in the #mainContent div than you may see on testing.
4. In the Internet Explorer Conditional Comment below, the zoom property is used to give the mainContent "hasLayout." This avoids several IE-specific bugs that may occur.
.twoColElsRtHdr #mainContent {
   margin: 0 13em 0 10px; /* the left margin will look best if you match the padding amount to the header and footer. */
.twoColElsRtHdr #footer {
padding: 0 10px; /* this padding matches the left alignment of the elements in the divs that appear above it. */
background:#DDDDDD;
.twoColElsRtHdr #footer p {
margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
padding: 10px 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
/* Miscellaneous classes for reuse */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page */
float: left;
margin-right: 8px;
.clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
clear:both;
    height:0;
    font-size: 1px;
    line-height: 0px;

Adobe Lightroom 3.2 does not show any images

I just updated to Lightroom 3.2 this week. It worked fine the past few days. Then last night, it started kind slow, then showed images shown in Library grid/strip view for any images. But it still show meta data. And no images in Develop tab. But if I move the mouse on the image area, the RGB values in histogram (upper right) still changes with differnt values. Just no images. And it still shows the shooting data.
I reinstalled it twice and oit still behave the same.
Then I build a new catalog. I see images only in the pre-import screen. Once a folder is imported, no images in this new catalog.
I also tried to clear cache, removed preferrance, and then create a new catalog. When I tried to import my images, there is a little triangle showing on top of each image, clicked and it said" Lightroom has some difficulty import the image file".
But PS CS5 Bridge and PS CS5 works just fine. I can actually right click on a grid (even though not seeing the real image or preview) and edit in PSP CS5.
BTW, the day before yesterday's problem, I was watchng the new Lightroom tutorial from this site (which I bought) and adjusted preference,... I don't know whether such a change of setting may cause Lightroom having difficulty seeing images.
Any help will be appreciated.
If anyone know how to submit a support request to Adobe please let me know too. I cannot find a way to get support free opf charge and I will not pay for their crash.
Eric

This happened to me before and did so again yesterday when I updated my NVidia drivers. NVidia evidently changes the display's color profile to "Use Windows display calibration." The solution is to reset the color profile for each of your displays back to what was set before. I am using Windows 7-64. This does not matter as for the ultimate solution, but getting to the proper dialog is easy: click Start and in the search box type "color management." You should get the proper dialog box open with "Color Management" at the top. When I have had this problem it showed Device: Display 1 {its name}, no ICC Profiles in the ICC Profiles list area and "Use Windows display calibration" below. Click "Add..." and find your display profile in the list. There are very many. Mine were right at the very bottom. Pick it. Set it as default for your display. Repeat for other monitors, if any. ...and the pictures are viewable back in Lightroom!
Good luck!
Greg

LR4 "All Photographs" does not show any images.

This week I upgraded from LR3 to LR4 on my Mac. Unfortunately, since doing so, "All Photographs" has stopped showing any images even though it indicates that there are 26,000 images in the library. Also, even though I have activated "Show photos in subfolders" that does not seem to work either. What is the problem please?

See this thread: http://forums.adobe.com/thread/971825?tstart=30

Preview does not show any images

Hello. I am running 10.6.5 and Preview does not work. Any image I try it on does not show up on Preview. Is there an existing solution to this problem?

You can trouble shoot by creating a new user account and see if the problem is still present.
You can Safe Boot to turn off third-party extensions and see if this is the cause.
It could be if you install the 10.6.5 Combo Update it may straighten out, particularly if you installed the delta through the Software Updater. No harm here to re-install this combo.

PSE does not open any image nor it is possible to open a new file

Hello,
having installed Photoshop Elements 13 for the first time on my Windows 7 Ultimate (64 Bit) computer it is a big disappointment.
I cannot open any image. It does not matter whether it is on a network share or local disk.
Have no deinstalled the program and reinstalled. But the behaviour does not change at all.
In the organizer I can select an image but when I want to transfer it the editor nothing happens.
It is also not possible to create a new empty image.
Anybody else having this behaviour?
- Holger -

Hi Ing-HoBa ,
Are you able to launch Photoshop Elements 13 Editor?
If not please follow these steps;
Go to following location:
for Win
C:\Program Files (x86)\Common Files\Adobe
C:\Users\username\AppData\Local\Adobe
for MAC
Finder> Go > Go to Folder
\Library\Applicaiton Support\Adobe
~\Library\Applicaiton Support\Adobe
Locate folder OOBE and rename it OOBE.old
Download and install
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager
After the installation
Try to Open Adobe Application Manager / Creative Cloud App.
Log in that with Adobe ID and Password.
If it does not work first try couple of times more.
Let me know if this resolves the issue.
Reagrds
Sandeep

Aperture 3 Import Dialog Doesn't Show Any Images

Sometimes the import dialog just doesn't show any images. First time I encountered this I had to restart Aperture. But now even that doesn't help.
Screenshot:
http://dl.dropbox.com/u/1250153/a3.png
Any ideas or fixes?

Hello qua
You don't say what your source is when your imports have been experiencing problems. Are you importing directly from a camera (or a card in a card reader)? Or are you importing images which have already been downloaded to your hard disk?
I've just completed importing approximately 5,000 images which date back to 2001, across several hundred projects. These have, obviously, been imported from an existing disk-based archive. Every so often, I'd find what you've described - the import window with the source correctly selected, but no preview images. I never worked out a pattern for this behaviour. However, I found dealing with it +for my particular circumstances+ was as simple as pressing <escape> to cancel the import and then immediately beginning the import again. It never failed on the second time around. I never needed (for this problem) to quit and restart Aperture, let alone reboot my system.
The problem I just described was being experienced on a fully patched 3.0.1 system. Of course, you might be experiencing something slightly different...
Regards,
Gary

Import dialog does not come up in Lightroom 5.2RC

I've used Lightroom 5.2 RC for a few weeks and successfully imported a few times. This morning, however, the dialog will not come up and the program hangs until I kill it in Task Manager. This is in Windows 8 64-bit.
I've tried removing the memory card, and all other USB-connected devices, but it still hangs. Is this a known problem? Are there any known workarounds?
I'm a developer and can supply crash dumps if necessary. Here is what looks like the relevant thread if it helps the Adobe devs:
Call Site
ntdll!ZwWaitForSingleObject+0xa
dobe\Adobe Photoshop Lightroom 5.2 RC\Import.lrmodule -
KERNELBASE!WaitForSingleObjectEx+0x9a
Import!TerminateMOXThread+0x253
Import!RegKeyCR::~RegKeyCR+0x2e4
AgKernel!luaopen_package+0x6887
AgKernel!AgLua_setBreakpointsForChunk+0xc2f9
AgKernel!luaopen_package+0x69d1
AgKernel!AgThrowProgramErrorWithFormat+0x72
AgKernel!lua_yield+0x2fe
AgKernel!lua_pcall+0x60
ui!AgWinMenu::AgWinMenu+0x5d0
ui!AgMenu_performCommandID+0xe3
ui!AgViewWinMainFrame::OnCommand+0x32
mfc100u+0x26e12a
mfc100u+0x26e08c
mfc100u+0x26b8dd
mfc100u+0x26bc84
mfc100u+0x1201c7
USER32!DispatchMessageW+0x1fe
USER32!MsgWaitForMultipleObjectsEx+0x237
mfc100u+0x2550ca
lightroom!GetAppInstance+0x2258
mfc100u+0x255993
mfc100u+0x287548
lightroom!AgDataProvider::GetProviderType+0x12ba
KERNEL32!BaseThreadInitThunk+0x1a
ntdll!RtlUserThreadStart+0x21

Looks like if I reboot, it resolves itself. Not sure what happened. I did grab a crash dump just in case.

Lookout (fieldpoint object) does not list any connection to fp aio 600 (outputs)

The fieldpoint object in lookout reports that all channels in FP AIO 600 are inputs.
To fix this go to "edit data member configuration" and select the "output" channels of the AIO 600 and change the "member" prefix to "AO". Save and you now have access (can connect to) the channels in "edit connections"

Hi Rahul,
this question does not seem to be related to SQL and PL/SQL forum.
I guess you could use {forum:id=64} or {forum:id=61} forums.
Regards.
Al

When trying to statup with install disc inserted,all i get is an apple logo.when i try starting using command v it seems to see the cpu,but does not list any drivers.any thoughts appreciated!

when trying to startup with install disc inserted,all i get is an apple logo.when using command v keys,it seems to see the cpu, but doesn't list any drivers.any idea what,s wrong?

That is the wrong system disc, the Mid 2007 Mac Mini's originally came with Tiger 10.4. You must have been sent the wrong disc, because that gray 10.6 system disc is obviously for a later Mac.
Mac mini (Mid 2007) - Technical Specifications
At this point I'm afraid that your options are very limited.
1. Call Apple, have your serial # handy and ask for a replacement Tiger disc set. Problem is that it wouldn't be of much use, except for maybe running the Apple Hardware Test.
Apple - Support - iMac - Service FAQ
2. Purchase a Retail Snow Leopard Upgrade disc.
Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
As for the RAM, if 2GB is shown in both Apple / About This Mac and in the Activity Monitor then there is a pretty good chance that's it OK. Of course it is hard to test without the original disc set and in your case may need to be done with a third party RAM checker like Memtest OS X

Lightroom CC Import sees CF Card in reader but does not see any images, cannot import anything

I have installed Lightroom CC. It seems to work but if I connect a card reader with a CF card, while Lightroom sees the card, it sees no images. I have to copy the files to a hard disk and import from there. How do I fix this annoying problem?

Hi drchevalier,
You mean, you are able to import those files, if moved to hard drive but not able to view them when importing directly from the CF Card? Please attach a screenshot.
If so, might be an issue with the card. Did you try reformatting the card in the camera itself and check? If not, might want to try that.
Also, make sure your camera is in the Camera Raw plug-in | Supported cameras list. Else, you might not see it in Lr.
~ Arpit
EDIT: Sorry, did not see your reply. Glad to hear that the issue got resolved.

LR5 Import dialog does not list any images

Similar Messages

Maybe you are looking for