LR5 (Mac OS X 10.7.5): Fails when opening catalogs.

Upon opening any catalog or creating a new catalog, LR5 fails with the the message: "An error occurred when attempting to change modules." The workspace is blank. Clicking on any of the module buttons causes another of the same error message to be displayed.
Error log from LR startup to quit (without clicking any module buttons):
8/31/13 8:55:05.000 AM kernel: CODE SIGNING: cs_invalid_page(0x100000000): p=60327[AdobeCrashDaemon] clearing CS_VALID
8/31/13 8:55:15.225 AM Adobe Photoshop Lightroom 5: assertion failed!
8/31/13 8:55:18.963 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was accessoryView)
8/31/13 8:55:19.076 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:19.451 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:19.685 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:20.538 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:20.656 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:20.772 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:20.872 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:20.989 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:21.089 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:21.190 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:22.025 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:22.142 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:22.359 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was isHiddenOrHasHiddenAncestor)
8/31/13 8:55:23.002 AM Adobe Photoshop Lightroom 5: Failed to restore first responder (message was inputContext)
8/31/13 8:55:23.498 AM [0x0-0xac5ac5].com.adobe.Lightroom5: 08-31-2013 08:55:14
8/31/13 8:55:23.498 AM [0x0-0xac5ac5].com.adobe.Lightroom5: 08-31-2013 08:55:14
8/31/13 8:55:23.498 AM [0x0-0xac5ac5].com.adobe.Lightroom5: 08-31-2013 08:55:14
8/31/13 8:55:23.498 AM [0x0-0xac5ac5].com.adobe.Lightroom5: 08-31-2013 08:55:23
8/31/13 8:55:24.000 AM kernel: CODE SIGNING: cs_invalid_page(0x100000000): p=60335[LogTransport2] clearing CS_VALID

Thanks for pointing me to that KB article, although, it only helped me find out what the problem was, not actually give me a solution. I had to go all the way to Solution 6 to get LR running again, albeit, without any of my presets. It did make me realize that the ~/Library/Application Support/Adobe/Lightroom folder was the problem. Somehow the folder had become corrupted. Where sub-folders had been aliases were found. Somehow the folder had been corrupted sometime early yesterday morning while LR was still running. It wasn't until today when I restarted LR that the problem showed up. I restored the folder and sub-folders with Time Machine and all is well.
Thanks,
Grant

Similar Messages

Photo shop Element 6 failed to open catalog The catalog could not be opened. It is either corrupt

Photo shop Element 6 failed to open catalog The catalog could not be opened. It is either corrupt, or the version is out of date and cannot ne updated

Hi John
Thank you very much. As a result of your advise, Adobe Photoshop Element 6 are now working perfect.
Once again, Thank yoiu
Kind regards
Boomie
Original Message----
From: [email protected]
Date: 08/03/2010 05:37 PM
To: "Boomie Shodeinde"<[email protected]>
Subj: Photo shop Element 6 failed to open catalog&amp;nbsp; The catalog could not be opened.&amp;nbsp; It is either corrupt
Your solution worked when applied to a administrative user account but did work with a student account.
I'm not sure why that is happening.
If you're on Vista or Windows 7, you could try setting the program to run permanently as Administrator, as described here:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Slide_show_preview
If that doesn't help, my only suggestion would be to work through these tedious troubleshooting steps:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Troubleshooting_Organizer_ crashes

Dual Booting Mac OS X and Arch, rEFInd fails to open initrd file

I gave up on trying to solo boot Arch on a MacBook(1,1), and I'm dual booting. I have Arch installed on its own partition, and rEFInd is installed and configured through Mac OS X. I followed the wiki's instructions on moving the initramfs files and creating refind_linux.conf in Arch's folder on the EFI partition, and when I reboot, Arch appears as a boot option! This is good news! However, when I select it, the following happens:
rEFInd - Booting OS
Starting vmlinuz-arch.efi
Using load options 'root=/dev/sda4 ro rootfstype=ext4 systemd.unit=multi-user.target initrd=\EFI\arch\initramfs-arch.img'
Failed to open initrd file: EFI\arch\initramfs-img
My question is, do I need to install refind-efi on the Arch partition, even though I've installed rEFInd on Mac OS X?
Also, do I need to install GRUB in Arch, even though I've [attempted to] used EFISTUB to link rEFInd with Arch?
Thanks in advance for your help.

I got 32-bit UEFI to work on my macbook, and I found it to be rather straight forward. But 32-bit UEFI is not incredibly common, and I wanted to have a 64-bit system so that I could potentially chroot into my other computer's disk if necessary. So that is why I ended up using bios compatibility on my macbook.
Edit: Oh yeah, and yes, using MBR only is also another way in which you can use bios compatibility mode. Basically you just need to have a MBR with more than one protective partition, and I think you need to have one partition marked as bootable in the MBR. It has been a while since I got all that macbook stuff working though, so the info is a bit stale in my head.
Last edited by WonderWoofy (2013-06-09 20:31:17)

Flash CC failing when opening existing FLA

Hi,
I have several Flash Professional projects (primarily AIR Android), that fail to open in Flash Professional CC with the following error message:
     Could not load scene into memory. Your document may be damaged.
These same FLA files open fine in Flash Professional CS6, so I know that they are not damaged.
Any thoughts on how to resolve this?
Thanks!

I'm having the same problem, a little different scenario though. The FLA is originally from Flash CS6, saved as a Flash CC FLA.
After saving and reopening it defaulted to "Scene 2" and wrote to the output panel, "Could not load scene into memory. Your document may be damaged." The library was empty and nothing was on the stage. File properties (stage width/height, framerate, etc) were correct, there was just nothing in the library.
Try #1: I retrieved the original FLA from GitHub and tried it again. This time it was okay after a save and reopen.   All good. Later I saved again, closed, and reopen the next day. It was corrupted again.
Try #2: I retrieved the original FLA from GitHub and tried it again. This time I copied all the library items from the old library to a fresh, new Flash CC FLA. Saved, closed, and reopened. Corrupted file again.
Try #3: I retrieved the original FLA again. This time I copied the library items to a fresh XFL file. Saved, closed, everything okay. Later saved, closed, found the file corrupted again. Digging into the ~/Library folder of the XFL package there's nothing that seems wrong... all the XML files are there.
Try #4: Opened on a different computer. Still corrupted.
As long as I have the FLA/XFL open it won't go corrupt. Its the moment I save and close that there are problems.   I'm working on a Mac OS 10.8, I uninstalled and reinstalled both Flash CS6/CC and Flash Builder 4.7 to ensure it wasn't bad installs. Library is a mix of buttons, bitmaps, and movieClips. Flash CS6 now suffers the same fate too after the latest update.

Database logon failed when opening report with parameter values in CrystalReportViewer

Hi,
I designed 2 crystal reports: report A contains parameter fields and report B did not contain any parameter
I can open both reports in development site using CrystalReportViewer control. When I open the reports in testing site,
I can open report B but can't open report A. It display error message "Database logon failed". When I set EnableDatabaseLogonPrompt
to true and try to open the report A again, it shows database connection data which was created on report.
In addition, it is strange that it displays error "Database logon failed" when I click an item in group tree panel of the report B. This indicates that it can load data from database
in testing site but it connect to development database when clicking items in group tree panel
All reports connect to database using Windows Authenication. It use dynamic database connection at runtime
How to ensure the report always connect database using login data dynamically at runtime?
Below is my code about database connection:
string strServerName = null;
string strDatabaseName = null;
ReportDocument rptDoc = new ReportDocument();
rptDoc.Load(strFilePath);
ConnectionInfo connInfo = new ConnectionInfo();
TableLogOnInfo logonInfo;
for (int i = 0; i < rptDoc.Database.Tables.Count; i++)
logonInfo = rptDoc.Database.Tables[i].LogOnInfo;
ReportHelper.GetReportConnection(ref strServerName, ref strDatabaseName, strSystemType);
logonInfo.ConnectionInfo.ServerName = strServerName;
logonInfo.ConnectionInfo.DatabaseName = strDatabaseName;
logonInfo.ConnectionInfo.IntegratedSecurity = true;
rptDoc.Database.Tables[i].ApplyLogOnInfo(logonInfo);
rptDoc.Database.Tables[i].Location = rptDoc.Database.Tables[i].Location.Substring(0, rptDoc.Database.Tables[i].Location.Length - 2);
crvViewer.ReportSource = rptDoc;
crvViewer.DataBind();
Development environment:
- SAP Crystal Reports 2013 Support Pack 1
- Visual Studio Professional 2012
- .NET Framework 3.5
- DDL
CrystalDecisions.Shared (v 13.0.8.1216)
CrystalDecisions.Web (v 13.0.8.1216)
CrystalDecisions.CrystalReports.Engine (v 13.0.8.1216)
Database connection in crystal report:
- Database Type: OLEDB (ADO)
- Provider: SQLOLEDB
- Integrated Security: True
Thanks and Regards,
Tony

Hi Tonylck
Try to pass login info to crystal report dynamically as follows:
using System;
using System.Windows.Forms;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
namespace WindowsApplication1
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
ReportDocument cryRpt = new ReportDocument();
TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
ConnectionInfo crConnectionInfo = new ConnectionInfo();
Tables CrTables ;
cryRpt.Load("PUT CRYSTAL REPORT PATH HERE\CrystalReport1.rpt");
crConnectionInfo.ServerName = "YOUR SERVER NAME";
crConnectionInfo.DatabaseName = "YOUR DATABASE NAME";
crConnectionInfo.UserID = "YOUR DATABASE USERNAME";
crConnectionInfo.Password = "YOUR DATABASE PASSWORD";
CrTables = cryRpt.Database.Tables ;
foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
crtableLogoninfo = CrTable.LogOnInfo;
crtableLogoninfo.ConnectionInfo = crConnectionInfo;
CrTable.ApplyLogOnInfo(crtableLogoninfo);
crystalReportViewer1.ReportSource = cryRpt;
crystalReportViewer1.Refresh();
Ref
http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-dynamic-login.htm
Mark as answer if you find it useful
Shridhar J Joshi Thanks a lot

Sound fails when opening new sound "sources" quickly after one another

I hava a problem when the sound on Arch running XFCE.
At first, there was no sound. I searched for a solution, and found one that seemingly did help. I created .asoundrc in ~ with this text:
pcm.!default {
type plug
slave.pcm {
@func getenv
vars [ ALSAPCM ]
default "hw:PCH"
This should set the default sound card (as my motherboard have both PCH and HDMI sound card).
Now there is sound, but it fails when i switch from different sound "sources" (like different YouTube-videoes). For the sound to work again, I have to refresh the page, and generally wait some 20 seconds.
My motherboard is MSI GAMING 3 Z97, and I don't have more sound card than what is on that card.
So I was hoping for some help. It's not a big problem, but a bit irritating. :)

I'm going to go out on a limb and guess that you've got a custom timecode field somewhere in your production and/or asset metadata group(s), right? And I'm going to further guess that this timecode field has dashes in it like this --:--:--:--, right? If so, try this: Click the arrow next to the timecode field and adjust the timecode so that it has a number (it doesn't matter what the number is as long it's not dashes - "00:00:00:00" is fine). Then Save this asset, close it and then reopen it and see if the beeping madness has vanished. Then, to make this change permanent for all of your new assets, make sure to edit the default value of any custom timecode fields to put zeros (or some other numeric default value) into them when a new asset is generated. If the asset still beeps when you open it, check the other metadata groups in your set to see if there isn't another empty timecode field lurking in the shadows.
Jason

Adobe updater mac version fails when opening Master Suite CS3 products after reinstall from drive crash

When I open a CS3 Adobe Product I get a screen that says "Adobe Updater Failed". I reinstalled the suite after a hard disk failure and re-registered the product. I'm sure that there are many updates since this suite came out many years ago, and I want to update to the latest versions.

I have since downloaded a new version of Adobe Updater 5, but now when i launch, the the error screen: "Check your internet connections, Updater cannot connect to the web [paraphrased]", shows up. Of course the internet connection is there for safari, firefox and chrome.

"Open method of Workbooks class failed" when opening Excel file via Internet Explorer

(apologies, I posted this first to the general Office 2010 forum, but then realized this was probably a better spot to post)
We have an Excel COM add-in installed on users' PCs. This add-in responds to workbook open events by opening a particular XLA file (also deployed to the PC) to make certain features available. This process works flawlessly when Excel files are
opened locally - but when a user attempts to open an Excel file from an IE link, we get the following error: "Open method of Workbooks class failed". This is happening on the line that is trying to open the XLA file. This only happens
when launching an Excel link from IE - works fine in Chrome or Firefox.
I have found several posts on this topic, but no solutions:
1. This post (https://social.msdn.microsoft.com/forums/office/en-US/73c96005-84af-4648-b103-32b677205be3/open-method-of-workbooks-class-failed)
is the closest to our problem. In this case, the "answer" was that the user may not have access to the 2nd workbook being opened. But in our case, we're opening an XLA that is on the local machine, and I've confirmed that it is not
corrupt and accessible (read & write, just in case!) to Everyone.
2. This (very old) post (http://www.pcreview.co.uk/forums/open-method-workbooks-fails-excel-hosted-ie-t965608.html)
seems similar, but is talking about opening Excel inside of IE. This is not what we're doing - the link is supposed to (and does) open Excel outside of IE. Interestingly, Excel.exe is being launched with the "-embedded" flag, even
though it isn't running in the IE window. When launching Excel by opening the file locally, Excel.exe is run with the "/dde" flag instead. Clearly the "-embedded" mode is what is causing the problem. I could change the
links on the web page to use some JavaScript to open Excel differently... unfortunately, the links are actually generated by SharePoint (the Excel files are in a SP repository), so this is not really an option.
3. This Microsoft KB article (http://support.microsoft.com/kb/268016) talks about problems opening an XLA directly from IE... but this is the case of a link pointing
directly to an XLA file, not opening a regular workbook that in turn opens an XLA, as is my case. In fact, this article specifically points out in the "More Information" section that "End users do not normally open XLAs; instead they open
an XLS that (if needed) loads one or more XLAs during startup." ==> precisely what I'm trying to do that is giving me the error!
I've replicated the situation with a very simple COM add-in (created in VS2010 using VB.Net) and a very simple XLA file (does nothing, just pops up a message in auto_open). For anyone wanting to try it out, here is the exact test case:
1. In Excel, create a simple XLA file containing only the following code, and save it in C:\TEMP\dummy.xla:
Sub Auto_Open()
MsgBox "Auto Open fired"
End Sub
2. In Visual Studio, create a new Excel 2010 Add-In. I created mine via Visual Basic, but I doubt the choice of language matters. Place the following code in ThisAddin.vb:
Public Class ThisAddIn
Private Sub ThisAddIn_Startup(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Startup
AddHandler Me.Application.WorkbookOpen, AddressOf Application_WorkbookOpen
End Sub
Private Sub ThisAddIn_Shutdown(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Shutdown
End Sub
Sub Application_WorkbookOpen(ByVal workbook As Excel.Workbook)
On Error GoTo ErrHandler
If (Not workbook.Name.Contains("dummy.xla")) Then
MsgBox("Workbook open")
Application.Workbooks.Open("C:\temp\dummy.xla")
Application.Workbooks("dummy.xla").RunAutoMacros(Excel.XlRunAutoMacro.xlAutoOpen)
End If
Exit Sub
ErrHandler:
MsgBox(Err.Description)
End Sub
End Class
3. Build & publish this add-in and install it on the same machine as the XLA created in step 1.
4. Create and save an empty Excel workbook (I called mine WayneTest1.xlsx) - save it locally (on your desktop), and put a copy somewhere on your web server (I put mine directly in c:\inetpub).
5. Create an HTML file with a link to that workbook, saving it to the same web server location - here is mine:
<html>
<body>
<a href="WayneTest1.xlsx">Link to Excel file</a>
</body>
</html>
6. Double click the workbook on your desktop (from step 4) - opens fine, I get the "workbook open" message, following by the "Auto Open fired" message.
7. In Internet Explorer, navigate to the HTML file specified in step 5 and click on the link - when prompted, select "Open" - I get the "workbook open" message, following by the error message "Open method of Workbooks class failed".
Here are a few things I've ruled out / tried so far:
- Unchecked all the "Protected View" settings in Excel, made no difference
- Unchecked all the "File block settings" in Excel, made no difference
- Made sure dummy.xla was open for read & write to Everyone
- Made sure the web page was in Trusted sites and set the security level to Low for those sites in IE
- Tried making the local desktop file (step 6) readonly, made no difference (i.e. launching it locally still worked fine)
- Tried using Excel 2013 - made no difference
Any ideas / suggestions?

Hello Wayne,
Apologies for the delay.
I went through your post and tried to reproduce the issue. I was able to reproduce it. Based
on its complexity and as it requires more in-depth analysis, your question falls into the paid support category which requires a more in-depth level of support.
Please visit the below link to see the various paid support options that are
available to better meet your needs. http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Thanks,
Anush

Java ME 8 Permission check failed when opening a serial port

I have a larger Jave ME8.1 application that was going well until I tried to add one last piece, reading and writing data from a serial port. This was left to last because it is trivial, at least in most programming languages. The is IDE NetBeans 8.0.2 running on a Windows 7 PC. The platform is a Raspberry Pi B or B+ (I have tried both) with the most current Raspbian (12/24/2014 I believe). To simplify the process I created a new app with just the open and close code and this generates the same error I am experiencing in the larger application. The program is as follows:
package javamecomapp;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.microedition.io.CommConnection;
import javax.microedition.io.Connector;
import javax.microedition.midlet.MIDlet;
* @author ****
public class JavaMEcomApp extends MIDlet {
    static int BAUD_RATE = 38400;
    static String SERIAL_DEVICE = "ttyAMA0";
    static CommConnection commConnection = null;
    static OutputStream os = null;
    static InputStream is = null;
    static String connectorString;
    private int rtnValue = -1;
    @Override
    public void startApp() {
        java.lang.System.out.println("Opening comm port.");
        try {
            rtnValue = JavaMEcomApp.openComm();
        } catch (IOException ex) {
            Logger.getLogger(JavaMEcomApp.class.getName()).log(Level.SEVERE, null, ex);
    @Override
    public void destroyApp(boolean unconditional) {
        java.lang.System.out.println("Closing comm port.");
        try {
            rtnValue = JavaMEcomApp.closeComm();
        } catch (IOException ex) {
            Logger.getLogger(JavaMEcomApp.class.getName()).log(Level.SEVERE, null, ex);
        private static int openComm()throws IOException {
            java.lang.System.out.println("Opening comm port.");
            connectorString = "comm:" + SERIAL_DEVICE + ";baudrate=" + BAUD_RATE;
            commConnection = (CommConnection)Connector.open(connectorString);
            is = commConnection.openInputStream();
            os = commConnection.openOutputStream();
        return 0;
    private static int closeComm()throws IOException {
        java.lang.System.out.println("Closing comm port.");
            is.close();
            os.close();
            commConnection.close();
        return 0;
If I comment out the JavaMEcomApp.openComm and closeComm lines it runs fine. When they are included, the following error is dumped to the Raspberry Pi terminal:
Opening comm port.
Opening comm port.
[CRITICAL] [SECURITY] iso=2:Permission check failed: javax.microedition.io.CommProtocolPermission "comm:ttyAMA0;baudrate=38400" ""
TRACE: <at java.security.AccessControlException: >, startApp threw an Exception
java.security.AccessControlException:
- com/oracle/meep/security/AccessControllerInternal.checkPermission(), bci=118
- java/security/AccessController.checkPermission(), bci=1
- com/sun/midp/io/j2me/comm/Protocol.checkForPermission(), bci=16
- com/sun/midp/io/j2me/comm/Protocol.openPrim(), bci=31
- javax/microedition/io/Connector.open(), bci=77
- javax/microedition/io/Connector.open(), bci=6
- javax/microedition/io/Connector.open(), bci=3
- javamecomapp/JavaMEcomApp.openComm(), bci=46
- javamecomapp/JavaMEcomApp.startApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callStartApp(), bci=1
- com/sun/midp/midlet/MIDletPeer.startApp(), bci=5
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=246
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
- com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
java.security.AccessControlException:
- com/oracle/meep/security/AccessControllerInternal.checkPermission(), bci=118
- java/security/AccessController.checkPermission(), bci=1
- com/sun/midp/io/j2me/comm/Protocol.checkForPermission(), bci=16
- com/sun/midp/io/j2me/comm/Protocol.openPrim(), bci=31
- javax/microedition/io/Connector.open(), bci=77
- javax/microedition/io/Connector.open(), bci=6
- javax/microedition/io/Connector.open(), bci=3
- javamecomapp/JavaMEcomApp.openComm(), bci=46
- javamecomapp/JavaMEcomApp.startApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callStartApp(), bci=1
- com/sun/midp/midlet/MIDletPeer.startApp(), bci=5
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=246
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
- com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
Closing comm port.
Closing comm port.
TRACE: <at java.lang.NullPointerException>, destroyApp threw an Exception
java.lang.NullPointerException
- javamecomapp/JavaMEcomApp.closeComm(), bci=11
- javamecomapp/JavaMEcomApp.destroyApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callDestroyApp(), bci=2
- com/sun/midp/midlet/MIDletPeer.destroyApp(), bci=6
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=376
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
- com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
java.lang.NullPointerException
- javamecomapp/JavaMEcomApp.closeComm(), bci=11
- javamecomapp/JavaMEcomApp.destroyApp(), bci=9
- javax/microedition/midlet/MIDletTunnelImpl.callDestroyApp(), bci=2
- com/sun/midp/midlet/MIDletPeer.destroyApp(), bci=6
- com/sun/midp/midlet/MIDletStateHandler.startSuite(), bci=376
- com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite(), bci=38
- com/sun/midp/main/CldcMIDletSuiteLoader.startSuite(), bci=5
- com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite(), bci=130
com/sun/midp/main/AppIsolateMIDletSuiteLoader.main(), bci=26
I have tried this with three different serial ports, /dev/ttyAMA0 (yes I did disable the OS from using it), an arduino board /dev/ttyACM0, and a USB to RS485 adaptor /dev/ttyUSB0. All of these ports could be connected and use normally with both a C program and terminal program in the Pi. The API Permissions were set in the project properties / Application Descriptor / API Permissions to jdk.dio.DeviceMgmtPermission "/dev/ttyAMA0". This of course was changed as I tested different devices.
I found a reference suggesting adding the line "authentication.provider = com.oracle.meep.security.NullAuthenticationProvider" to the end of the jwc_properties.ini file. This had no effect. I found references that during development in eclipse and NetBeans, the app is already elevated to the top level so this should not be an issue until deployment. This does not appear to be the case.
I am out of time and need a solution quickly. Any suggestions are welcome.

Terrence,
   Thank you for responding and confirming the issues I'm having with static addressing. As far as the example above, I do have the standard LEDs working correctly, however, the example I'm referring to above is from the JavaME samples using the GPIO Port for the LEDS, according to the Device I/O Preconfigured List you referenced:
GPIO Ports
The following GPIO ports are preconfigured.
Devicel ID
Device Name
Mapped
Configuration
8
LEDS
PTB22
PTE26
PTB21
direction = 1 (Output only)
initValue = 0
GPIOPins:
controllerNumber = 1
pinNumber = 22
mode = 4 (Push-pull mode)
controllerNumber = 4
pinNumber = 26
mode = 4 (Push-pull mode)
controllerNumber = 1
pinNumber = 21
mode = 4 (Push-pull mode)
So is the assumption that using GPIOPort for accessing the GPIO port for Device ID 8 as listed in the Device I/O Preconfigured list not supported?

Load Report failed when opening Report under IIS 5.1

I recently upgraded to Crystal Reports 2008 (12) from Crystal Reports Basic 2008 (10.5). I am using Visual Studio 2008 with the CrystalReportViewer. Now when I run my reports from the website under IIS 5.1 (Windows XP SP3), I get a Load Report Failed. The detailed exception follow:
Error loading report (ConfigureCrystalReports)
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x800001F5): The Report Application Server failed at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at ncspo.ReportViewer.ConfigureCrystalReports() in D:\Websites\NCSPO\FIS\ReportViewer.aspx.vb:line 43
If I run the report using the ASP.Net Development Server, the reports run fine. It only fails under IIS. From other posts, I understand that i need to grant the Network Service and IIS_WPG group read/write permissions to the windows\temp folder. I have done this for the Network Service, but the IIS_WPG group was not introduced until IIS 6.0. Any ideas on how I can get this working under IIS 5.1?
Here is the code behind page:
Private Sub ConfigureCrystalReports()
            Try
                rpt = New ReportDocument
                Dim strReportFilename As String
                If Len(Request.QueryString("ReportFilename")) > 0 Then
                    strReportFilename = Request.QueryString("ReportFilename")
                Else
                    strReportFilename = System.Configuration.ConfigurationManager.AppSettings("cr404Page")
                End If
                Dim strReportPath As String = System.Configuration.ConfigurationManager.AppSettings("ReportPath")
                Dim strReportFilePath As String = strReportPath & strReportFilename
                Dim strReportFilePath_Full As String = Server.MapPath(strReportFilePath)
                rpt.Load(strReportFilePath_Full)    <--- Exception occurs on this line
            Catch ex As Exception
                lblStatus.Text = "Error loading report (ConfigureCrystalReports)"
                lblStatus.Text &= "<BR>" & ex.ToString()
                ncspo.clsMisc.LogError(ex, Me)
            End Try
        End Sub

Am I correct in reading the following 2 documents that IIS 5.1 is not supported?
If you check this document. It shows IIS6 and 7 no support on 5. See page 6
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f05523e4-35c4-2b10-2c89-9fcf64b0dd22]
This document also on page 5
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a87366-da1d-2b10-e1b4-a37ab37a2dea]
Thanks.

"Update failed" when opening Ap2 library with Ap3

One of my two Ap 2.14 libraries opened and upgraded in Ap3 with no trouble, but the other one gets an "Update failed" error message. I launched Ap3 while holding the option key and selected the library, and Ap3 produced the error message and quit. I tried running both "standard" and "admin" user accounts. Tried running Consistency Check and Rebuild Library with Ap2. Repaired permissions. No dice. Ap3 will not open the library.
Suggestions? Anyone else having similar troubles?

Ok, so I am(was) in the same boat as everyone. "Open the A3 Trial>want to update?>Upgrade....Update Failed"
So no success to enter the program,
so what I did was kinda like Trick Aperture, I went on my A2 Library clicked on (more info, Command+I) and opened the section Name and Extension and changed to a whatever named, but before I copied the original name, just in case... then it asks you to accept, the new extension...
so yes, and that Aperture Library becomes a Folder with ALL of you projects...
Now you are Able to enter A3 because is not causing that "Whatever" conflict it is with the new version, but then, on A3 I tried to import the projects and it would not appear on A3 Browser.
But I knew the projects were there...
so I closed A3... Deleted the New A3 Library (it creates automatically)
and pasted the original name on my A2 Library... and reopened A3 and it started the whole Importing process... and is on 4-5% as of now.
So if it is a little confusing here are the process I've done:
1.Changed the name and extension of A2's Library to whatever.(save the original name on a document or else)
2.Opened A3, closed.
3.Deleted A3 Library (1.3mb)
4.Renamed A2 Library (which is a folder now) with Original Name, then it became A2 Library again. Mine look like this (Aperture Library.aplibrary)
And then reopened A3, and pressed Upgrade, it started the importing.
Hope it works for everyone.

Elements organizer 11 fails when opened from the welcome banner or from PSE11

Windows 8 operating system (upgraded from 7)
PSE & premier installed from disk, purchased from Amazon.
Organizer has sometimes worked, but the last two times (after re-booting), it has failed.
Out of space for back up, but I can't fix that without getting into the catalogs. (I don't want to buy space from Adobe.)

Try making a direct desktop icon for the Organizer and see if you can launch the program directly from the desktop.
Right click anywhere on the desktop and select New >> Shortcut
Browse to Computer OS C:
And find the PSE Organizer application in Program Files or Program Files (x86) on Windows 7 - 64 bit.
Inside the Adobe >> Photoshop Elements Organizer (yellow folder) you are looking for an application file “PhotoshopEementsOrganizer” with six small icons (e.g. representing thumbnails)
Select it and click OK
Click next
Then click finish
You should now be able to launch directly form the desktop by double clicking on the new icon.

Mac installing flash player, Flash quits unexpectedly when opened after download.

Can anyone help me with this? Flash has been in use on my mac for a long time, but when I updated to 11 version it never worked right, and kept using older version to play games etc.. and I updated to flash 12, the flash program quits unexpectedly when I open it after downloading it. It prompts to send error report to apple, and will not run flash player. I troubleshoot and have uninstalled all following those steps and still cannot run an installed file of flash. I tried to install earlier versions, 10.3 and others all quit unexpectedly version flash 9 is outdated and cannot be downloaded. I now have NO FLASH PLAYER at all and cannot figure out what is happening ! ANY INSITE would be apprecialted thank you

Doing the COCOA install isn't that tough.
Download the FULL Installer: Flash Player 12 Plug-in (Mac OS X)
Save the file and Quit Safari.
Double click the downloaded file
and it will mount on your desktop,
and open a window with the installer.
Right click the installer and choose "Show Package Contents"
In Contents/Resources, double click the Adobe Flash Player.pkg file
The installer will open. Follow the instructions.
It'll ask for your Admin password, and it will install.
It's just that easy.

Mac computer hangs for minute or two when opening new tab and when opeing printer version

MacBookPro Intel Core I7 using OS X10.7.2; Firefox V9.0.1; anti-virus ESET cybersecurity;

-> Update Firefox to the latest version 10
* [[Installing Firefox on Mac]]
-> Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.

Podcast Composer fails when opening - how to reinstall?

I just tried the Podcast Composer on my Mac Mini Server to get a feeling of it (I have no idea what a Podcast is, but that's not important right now). As soon as the program starts, it produces an error and asks to send a report to Apple. I did send it, but I am wondering how can I reinstall the program from scratch.
Any advice will be appreciated.
P.S.: Forgot to add: Latest Snow Leopard Server, fully updated etc. Mac Mini Server latest version, purchased last January, if that matters.
Message was edited by: John Caradimas

I just tried the Podcast Composer on my Mac Mini Server to get a feeling of it (I have no idea what a Podcast is, but that's not important right now). As soon as the program starts, it produces an error and asks to send a report to Apple. I did send it, but I am wondering how can I reinstall the program from scratch.
Any advice will be appreciated.
P.S.: Forgot to add: Latest Snow Leopard Server, fully updated etc. Mac Mini Server latest version, purchased last January, if that matters.
Message was edited by: John Caradimas

LR5 (Mac OS X 10.7.5): Fails when opening catalogs.

Similar Messages

Maybe you are looking for